Nanoscience and Nanotechnology Commons^™

Role Of Vapor Phase Processes On The Sintering Of Diesel Oxidation Catalysts, Cristhian Carrillo

Nanoscience and Microsystems ETDs

This work provides a fundamental understanding on the vapor phase processes that govern the sintering of supported nanoparticles in relation to the diesel oxidation catalyst (DOC). Sintering is a deactivation process that affects this catalyst significantly, and many other catalyst systems. Therefore, it is important to understand the sintering mechanisms in order to improve the long term catalytic reactivity.

Pt is an active catalyst in the DOC but it sinters via Ostwald ripening to form large particles under the accelerated aging conditions (800 ^oC) recommended by the Department of Energy (DOE). At 800 ^oC in the presence of …

Study Of Polysulfide Speciation In Lithium Sulfur Batteries Using In Situ Confocal Raman Microscopy, Josefine Mcbrayer

Nanoscience and Microsystems ETDs

Secondary lithium sulfur (Li-S) batteries have been heavily studied in the battery community since the start of the 21^st century due to their high theoretical capacity and specific energy density. The ground-breaking lithium ion battery has revolutionized society and its ability to store energy, however the lithium ion battery is reaching its limit with a theoretical capacity almost five times lower than that of lithium sulfur. With the improvement and commercialization of Li-S batteries, electric vehicles and personal electronics will have extended performance on a single charge. The viability of this promising chemistry relies on overcoming several key difficulties, …

Mechanical Characterization Of Polymer Concrete With Nanomaterials, Alaeddin Douba

Civil Engineering ETDs

Nanomaterials are defined by those whose characteristic length scale lies within the nanometer scale. Their extreme dimension achieves extraordinary mechanical properties superior to other micro and macro additives. The introduction of nanotechnology to Civil Engineering utilizes low volume inclusions of nanomaterials to alter the properties of conventionally used bulk materials. Polymer Concrete (PC) where epoxy polymer binders replace cement binders, has become a common repair material among many other application and often can be considered an alternative to Portland cement concrete (PCC). PC is often used in bridge deck overlays, manholes, machine foundations and repairs. Its diverse chemical composition and …

A Study Of Dislocation Networks In Gasb On Gaas Using Transmission Electron Microscopy, Darryl M. Shima

Nanoscience and Microsystems ETDs

The growth of GaSb on GaAs is of interest for a variety of scientific and technological applications. Some evidence suggests that low threading dislocation density GaSb can be grown directly on GaAs through arrays of periodic edge misfit dislocations. However, significant conflicting data also exist. This work seeks to clarify the question through transmission electron microscopy analysis of GaSb grown on GaAs. The results of this work show that the single strategy of direct growth of GaSb on GaAs results in dislocation densities too high for devices. A secondary strategy of dislocation filtering layers is introduced to further reduce threading …

Dna Directed Assembly Of Gold-Tipped Metallic Single-Walled Carbon Nanotubes Into Electrical Devices, Ronald D. Salesky

Nanoscience and Microsystems ETDs

Carbon nanotubes have rightfully been regarded as a wonder material since their discovery by Iijima in 1991 and the subsequent elucidation of their many material properties. Their extreme strength is 10-fold higher than any industrial fiber. Their current density carrying capability is orders of magnitude higher than copper without failure from electromigration. Their high thermal conductivity bests diamond, and their structural versatility leads to either semiconducting or metallic electronic character. These properties all make the integration of carbon nanotubes into functional devices of high value. However, they remain a material of largely unrealized potential due to several challenges that arise …

A Study Of Iron-Nitrogen-Carbon Fuel Cell Catalysts: Chemistry – Nanostructure – Performance, Michael J. Workman

Nanoscience and Microsystems ETDs

Fuel cells have the potential to be a pollution-free, low-cost, and energy efficient alternative to the internal combustion engine for transportation and small-scale stationary power applications. The current state of fuel cell technology has already achieved two of these three lofty goals. The remaining barrier to wide-scale deployment is the high cost, which is primarily caused by dependence on large amounts of platinum to catalyze the energy conversion reactions. To overcome this barrier and facilitate the integration of fuel cells into mainstream applications, research into a new class of catalyst materials that do not require platinum is needed.

There has …

Measurement And Analysis Of Iii-V & Ii-Vi Infrared Detectors: Radiometric, Noise Spectrum, And Radiation Tolerance Performance, Vincent M. Cowan

Nanoscience and Microsystems ETDs

Infrared (IR) hybrid detector arrays and discrete detectors operated in the space environment may be subjected to a variety of sources of natural radiation while in orbit. This means IR detectors intended for applications such as space-based intelligence, surveillance, and reconnaissance (ISR) or space-situational awareness (SSA) must not only have high performance (high quantum efficiency, h and low dark-current density, J_D, and preferably minimal 1/f noise content), but also their radiation tolerance or ability to withstand the effects of the radiation they would expect to encounter in space must be characterized and well understood. As the effects of …

Applied Photoproperties Of Phenylene Ethynylenes, Patrick L. Donabedian

Nanoscience and Microsystems ETDs

Light-absorbing molecules can be used as powerful tools to perturb and understand biological systems by fluorescence, sensitization, or photochemical reactions. A thorough understanding of the delivery of dyes to specific biochemical targets and the processes that control the fate of excited-state energy is needed to engineer useful technology out of organic photochemistry. This thesis presents four projects investigating different aspects of pathogen destruction and biochemical sensing in a variety of systems, using the properties of p-phenylene ethynylenes (PEs), an especially flexible and well-studied class of conjugated molecules. Of particular relevance, some PEs are found to be effective dyes for amyloid …

Visualizing Mast Cell Activation: Single Molecule Dynamics Of Early Events In Fceri Signaling, Samantha Schwartz

Nanoscience and Microsystems ETDs

Healthy immune cell behavior requires sensitive and robust control over the processes that regulate signal transduction. In this work we employ single molecule fluorescence imaging techniques to quantify adapter protein recruitment, lateral mobility, receptor aggregation, and cytoskeletal organization to create a better understanding of many key processes in immune cell regulation. We focus on understanding the initiating events in FceRI signaling in mast cells. Mast cell signaling encompassing a wide array of cellular outcomes including calcium flux, release of pre-formed inflammatory mediators and the production of cytokines. Careful control over appropriate reactions to external antigens is necessary for mast cells …

Bio-Nano Interfaces: Enzyme Immobilization For Biomimetic Energy Harvesting, Rachel Hjelm

Nanoscience and Microsystems ETDs

In the face of todays rapidly growing energy demands accompanied by limited, non-renewable supplies, development of novel energy alternatives that are both renewable and inexpensive has become more important than ever. Development of 3D structures exploring the properties of nano-materials and biological molecules has been shown through the years as an effective path forward for the design of advanced bio-nano architectures for enzymatic fuel cells (EFCs). Despite advantages over conventional fuel cells, EFCs still suffer from several problems including low efficiency and stability. Overcoming these limitations in order to make them more viable for real world application is an ongoing …

The Effect Of Relative Electrode Size On The Performance Of A Supercapacitive Microbial Fuel Cell Design, Jeremiah Houghton

Nanoscience and Microsystems ETDs

Supercapacitive microbial fuel cells with various anode and cathode dimensions were investigated in order to determine the effect on capacitance and delivered power quality. The cathode size was determined to be the limiting component of the system, while anode size showed little effect on the devices performance. By doubling the cathode area, peak power output was improved by roughly 120% for a 10 ms pulse discharge. Doubling the cathode area also had a positive effect on the internal resistance of the cell, lowering the equivalent series resistance by approximately 47%. Doubling the anode area increased peak power output slightly, with …

Electrodeposition Of High Magnetostrictive Cobalt Iron Alloy Films For Smart Tags And Sensor Applications, Jamin Pillars

Nanoscience and Microsystems ETDs

Magnetostrictive CoFe films were investigated for use as magnetoelastic tags or sensors. The ability to electrodeposit these films enables batch fabrication processes to pattern a variety of geometries while controlling the film stoichiometry and crystallography. In current research looking at CoFe, improved magnetostriction was achieved using a co-sputtering, annealing, and quenching method1. Other current research has reported electrodeposited CoFe films using a sulfate based chemistry resulting in film compositions that are Fe rich in the range of Co0.3-0.4Fe0.7-0.6 and have problems of co-deposition of undesirables that can have a negative impact on magnetic properties2, 3. The research presented here focused …

Efficacy Of A Magnetic Drug Delivery System And Development Of An Orthotopic Lung Tumor Imaging Model, Amber Mcbride

Nanoscience and Microsystems ETDs

The aim of this work was the development of a novel drug delivery vehicle termed nano-in-microparticles (NIMs) to evaluate the magnetic-field dependent targeting of dry powder NIMs administered endotracheally using an ex vivo and in vivo rodent model. NIMs are a novel dry powder drug delivery vehicle containing 70% lactose (w/w), 20% SPIONs (w/w) and 10% fluorescent nanospheres (w/w). Mice were insufflated with NIMs delivery vehicle in the presence of magnetic field dependent targeting to the left ventral lung after thoracotomy; controls were insufflated with the NIMs in the absence of magnetic field dependent targeting. Quantification of deposition of the …