Nanoscience and Nanotechnology Commons^™

Variation Of Membrane Electrode Assembly Catalyst Layer In Unitized Regenerative Fuel Cell, Yollanda Nurcholifah, Dedi Rohendi, Edy Herianto Majlan, Nirwan Syarif, Addy Rachmat, Dwi Hawa Yulianti, Nyimas Febrika S

Journal of Electrochemistry

A unitized regenerative fuel cell (URFC) is a device that may function reversibly as either a fuel cell (FC) or water electrolysis (WE). An important component of this device is the Membrane electrode assembly (MEA). Therefore, this study aimed to compare the performance outcomes of MEA using electrodes with single and three catalyst layers. This study measured Electrochemical Surface Area (ECSA), Electrochemical Impedance Spectroscopy (EIS), X-ray Diffraction analysis (XRD), and X-ray Fluorescence (XRF). Furthermore, the round-trip efficiency (RTE) of the MEA, as well as the performance in FC and WE mode, was measured. In comparison, The ECSA values of Pt-Ru/C …

Electrocatalytic Nitric Oxide Reduction To Yield Ammonia Over Fe3C Nanocrystals, Sen Lin, Lang Zhang, Tong Hou, Jun-Yang Ding, Zi-Mo Peng, Yi-Fan Liu, Xi-Jun Liu

Journal of Electrochemistry

Nitric oxide (NO), which generally originates from vehicle exhaust and industrial flue gases, is one of the most serious air pollutants. In this case, the electrochemical NO reduction reaction (NORR) not only removes the atmospheric pollutant NO but also produces valuable NH₃. Hence, through the synthesis and modification of Fe₃C nanocrystal catalysts, the as-obtained optimal sample of Fe₃C/C-900 was adopted as NORR catalyst at ambient conditions. As a result, the Fe₃C/C-900 catalyst showed an NH₃ Faraday efficiency of 76.5% and an NH₃ yield rate of 177.5 μmol·h^–1·cm^{–2 …}

Ordering Degree Regulation Of Pt2Nico Intermetallics For Efficient Oxygen Reduction Reaction, Chen-Hao Zhang, Han-Yu Hua, Jun-Hao Yang, Qian Zhang, Chang Yang, De-Li Wang

Journal of Electrochemistry

Alloying transition metals with Pt is an effective strategy for optimizing Pt-based catalysts toward the oxygen reduction reaction (ORR). Atomic ordered intermetallic compounds (IMC) provide unique electronic and geometrical effects as well as stronger intermetallic interactions due to the ordered arrangement of metal atoms, thus exhibiting superior electrocatalytic activity and durability. However, quantitatively analyzing the ordering degree of IMC and exploring the correlation between the ordering degree and ORR activity remains extremely challenging. Herein, a series of ternary Pt₂NiCo intermetallic catalysts (o-Pt₂NiCo) with different ordering degree were synthesized by annealing temperature modulation. Among them, the o-Pt …

Performance Of Co2/H2O Co-Electrolysis In A Flat-Tube Solid Oxide Electrolysis Cell Stack Under Air-Free Environment, Xiao-Hui Zhong, Fei Wang, An-Qi Wu, Bei-Bei Han, Jian-Xin Wang, Wan-Bing Guan

Journal of Electrochemistry

This work investigates the transient performance and stability of CO₂/H₂O co-electrolysis in an air-free environment using a flat-tube solid oxide electrolysis cell (SOEC) stack. The results show that the transient behavior of the stack with and without blowing gas in the air electrode is almost the same. With a current density of 0.67 A·cm⁻²@750 °C, the stack operated for over 200 h under co-electrolysis conditions with no air blowing, and the voltage drop rate of the stack was approximately 0.203%/100 hours. Microstructure analysis reveals significant loss of Ni particles and formation of an insulating …

Metal Nitrides As Cathode Hosts For Lithium-Sulfur Batteries, Hai-Ji Xiong, Cheng-Wei Zhu, Ding-Rong Deng, Qi-Hui Wu

Journal of Electrochemistry

Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density (2600 Wh·kg^–1) and specific capacity (1675 mAh·g^–1). Currently, various strategies have been proposed to overcome the technical barriers, e.g., “shuttle effect”, capacity decay and volumetric change, which impede the successful commercialization of lithium-sulfur batteries. This paper reviews the applications of metal nitrides as the cathode hosts for high-performance lithium-sulfur batteries, summarizes the design strategies of different host materials, and discusses the relationship between the properties of metal nitrides and their …

Enhancing Cycle Life Of Graphite ‖ Lifepo4 Batteries Via Copper Substituted Li2Ni1-XCuXO2 Cathode Prelithiation Additive, Jian-Ming Zheng, Jing-Wen Zhang, Tian-Peng Jiao

Journal of Electrochemistry

Lithium nickel oxide (Li₂NiO₂), as a sacrificial cathode prelithiation additive, has been used to compensate for the lithium loss for improving the lifespan of lithium-ion batteries (LIBs). However, high-cost Li₂NiO₂ suffers from inferior delithiation kinetics during the first cycle. Herein, we investigate the effects of the cost-effective Cu substitution of Li₂Ni_1-xCu_xO₂ (x = 0, 0.2, 0.3, 0.5, 0.7) synthesized by high-temperature solid-phase method on the structure, morphology, electrochemical performance of graphite‖LiFePO₄ battery. The X-ray Diffraction (XRD) refinement result demonstrates that Cu substitution strategy is favorable …

Sno2 Particles Embedded Into Carbon Coated Mesoporous SioX Rod As High Volumetric Capacity Anode For Lithium-Ion Batteries, Jia-Lin Guo, Ni-Ni Li, Peng Zheng

Journal of Electrochemistry

Due to the high capacity and moderate volume expansion of silicon protoxide SiO_x (160%) compared with that of Si (300%), reducing silicon dioxide SiO₂ into SiO_x while maintaining its special nano-morphology makes it attractive as an anode of Li-ion batteries. Herein, through a one-pot facile high-temperature annealing route, using SBA15 as the silicon source, and embedding tin dioxide SnO₂ particles into carbon coated SiO_x, the mesoporous SiO_x-SnO₂@C rod composite was prepared and tested as the anode material. The results revealed that the SnO₂ particles were distributed uniformly in the …

New Insights Into Controlling The Functional Properties Of Tin Oxide-Based Materials, Alexandra Kuriganova, Nina Smirnova

Journal of Electrochemistry

Development of methodologies for fabrications of nanostructured materials that provide control over their microstructural features and compositions represents a fundamental step in the advancement of technologies for productions of materials with well-defined functional properties. Pulse electrolysis, a top-down electrochemical approach, has been demonstrated to be a viable method for producing nanostructured materials with a particular efficacy in the synthesis of tin oxides. This method allows for significant control over the composition and shape of the resulting tin oxides particles by modifying the anionic composition of the aqueous electrolyte, obviating the need for additional capping agents in the synthesis process and …

A Cnt Intercalated Co Porphyrin-Based Metal Organic Framework Catalyst For Oxygen Reduction Reaction, Pei-Pei He, Jin-Hua Shi, Xiao-Yu Li, Ming-Jie Liu, Zhou Fang, Jing He, Zhong-Jian Li, Xin-Sheng Peng, Qing-Gang He

Journal of Electrochemistry

The poor electronic conductivity of metal-organic framework (MOF) materials hinders their direct application in the field of electrocatalysis in fuel cells. Herein, we proposed a strategy of embedding carbon nanotubes (CNTs) during the growth process of MOF crystals, synthesizing a metalloporphyrin-based MOF catalyst TCPPCo-MOF-CNT with a unique CNT-intercalated MOF structure. Physical characterization revealed that the CNTs enhance the overall conductivity while retaining the original characteristics of the MOF and metalloporphyrin. Simultaneously, the insertion of CNTs generated adequate mesopores and created a hierarchical porous structure that enhances mass transfer efficiency. X-ray photoelectron spectroscopic analysis confirmed that the C atom in CNT …

Nanostructured Graphitic Carbon Nitride For Photocatalytic And Electrochemical Applications, Muhammad Abdul Qadeer, Iqra Fareed, Asif Hussaine, Muhammad Asim Farid, Sadia Nazir, Faheem K. Butt, Ji-Jun Zou, Muhammad Tahir, Shang-Feng Du

Journal of Electrochemistry

Graphitic carbon nitride (g-C₃N₄) exhibits great mechanical as well as thermal characteristics, making it a valuable material for use in photoelectric conversion devices, an accelerator for synthesis of organic compounds, an electrolyte for fuel cell applications or power sources, and a hydrogen storage substance and a fluorescence detector. It is fabricated using different methods, and there is a variety of morphologies and nanostructures such as zero to three dimensions that have been designed for different purposes. There are many reports about g-C₃N₄ in recent years, but a comprehensive review which covers nanostructure dimensions …

Nanomaterial-Enabled Enhancements In Thylakoid-Based Biofuel Cells, Amit Sarode, Gymama Slaughter

Center for Bioelectronics Publications

Thylakoid-based photosynthetic biofuel cells (TBFCs) harness the inherent light-driven electron transfer pathways of photosynthesis to enable sustainable solar-to-electrical energy conversion. While TBFCs offer a unique route toward biohybrid energy systems, their practical deployment is hindered by sluggish electron transfer kinetics, unstable redox mediators, and inefficient interfacing between biological and electrode components. This review critically examines recent advances in TBFCs, with a focus on three key surface engineering strategies: (i) incorporation of nanostructured materials to enhance electrode conductivity and surface area; (ii) application of redox mediators to facilitate charge transfer between photosynthetic proteins and electrodes; and (iii) functional exploitation of individual …

Cellax Nanoparticles: Taxane Nanoformulations For Solid Tumor Targeting, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nanoparticles (NPs), specifically polymer-modified NPs, have illustrated unique therapeutic advantages compared to bulk materials. Cellax NPs have provided a promising approach to cancer therapy by improving drug delivery, targeting the tumor microenvironment, and potentially overcoming drug resistance, all while reducing overall toxicity compared to traditional taxane treatment. By the flash nanoprecipitation (FNP) method, docetaxel and cabazitaxel have been formulated with polyethylene glycol (PEG) modified-acetylated carboxymethylcellulose (CMC) polymer to increase biocompatibility, bioavailability, specific targeting, and modulate the tumor microenvironment. However, there are some challenges and clinical limitations related to this formulation, encompassing optimum targeted delivery to tumors, overcoming biological barriers, such …

Epitaxial Quantum Dot Scintillators With Monolithic Photodetector Integration: Physics, Fabrication And Characterization Of Materials And Devices, Allan Oreave Minns

Electronic Theses & Dissertations (2024 - present)

This dissertation discloses the physics, fabrication, and characterization of high-performance scintillator detectors based on epitaxial InAs quantum dots (QDs) in GaAs. The detector crystals grown include monolithically integrated In_0.35GaAs photodetectors with Al_0.92-0.6In_0.03-0.35Ga_0.05As metamorphic buffer layers (MBL). A device fabrication process was developed for the lithographic patterning, chemical etching, contact metallization and readout integration of materials grown by means of molecular beam epitaxy (MBE) on 3-inch GaAs (001) wafers. Low capacitance integration with readout electronics was achieved through wire bonds to custom printed circuit boards (PCBs) with commercial components.

The relationship between device …

Advancing 4h-Silicon Carbide Power Mosfets Through Three-Dimensional Technology Computer Aided Design Optimization, Skylar A. Deboer

Electronic Theses & Dissertations (2024 - present)

This research contributes to the advancement of 1.2 kV 4H-Silicon Carbide (SiC) Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) through the development and implementation of sophisticated three-dimensional Technology Computer-Aided Design (3D TCAD) methodologies. These advanced simulation techniques enable comprehensive evaluation of innovative unit cell architectures that remain inaccessible to conventional two-dimensional (2D) TCAD approaches. By leveraging these 3D simulation capabilities, this work facilitates significant improvements in both the performance and reliability of next-generation wide-bandgap power devices.

Power devices convert electrical energy between different forms throughout the power grid making them essential in applications ranging from personal electronics, electric vehicles, renewable energy systems, industrial …

All-Solid-State Sodium-Ion Batteries: A Leading Contender In The Next-Generation Battery Race, Rui-Jie Zhu, Ze-Chen Li, Wei Zhang, Akira Nasu, Hiroaki Kobayashi, Masaki Matsui

Journal of Electrochemistry

All-solid-state lithium-ion batteries (LIBs) using ceramic electrolytes are considered the ideal form of rechargeable batteries due to their high energy density and safety. However, in the pursuit of all-solid-state LIBs, the issue of lithium resource availability is selectively overlooked. Considering that the amount of lithium required for all-solid-state LIBs is not sustainable with current lithium resources, another system that also offers the dual advantages of high energy density and safety— all-solid-state sodium-ion batteries (SIBs) —holds significant sustainable advantages and is likely to be the strong contender in the competition for developing next-generation high-energy-density batteries. This article briefly introduces the research …

Contributions To Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Will Be Listed As A New Recommendation Policy For China Youth Awards Of Electrochemist, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Nanostructured Silicon Meta-Waveguides And Surfaces For Enhanced Light-Matter Interaction, Saddam Gafsi

All Dissertations

In this study, we tackle the challenge of light-matter interaction engineering and local field enhancement using various silicon photonic platforms based on three different approaches. (i) The first approach is based on boundary condition engineering where we present and show through simulation and experimental results, a silicon nanodisk “diabolo” configuration able to support significant local field enhancement levels in the range ~102 to 104 in the high index medium through proper structural modifications at the nanoscale. We show that the presented optical behavior is consistent with the anapole modes characterized by the observed near-field enhancement and coinciding with far-field suppression. …

Journal Of Electrochemistry, The Flagship Journal Of Chinese Chemical Society Electrochemical Committee, Made A Public Appearance At The 22nd National Electrochemical Congress, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Award Ceremony Of The 2nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers Came To A Successful Conclusion, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The 9th National Conference Of Solid State Battery Successfully Held In Xiamen, Fujian, Zheng-Liang Gong

Journal of Electrochemistry

No abstract provided.

Journal Of Electrochemistry Is Selected To Entering Ici Journals Master List, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Goodbye With Tears! Deep Condolences To Academician Zhao-Wu Tian!, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

The Adviser Of Journal Of Electrochemistry Professor Christian Amatore Received The Chinese Government Friendship Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Predictive Residual Neural Networks For Optical Trapping Of Small Particles, Nasim Mohammadi Estrakhri, Ponthea Zahraii, Saman Kashanchi, Nooshin M. Estakhri

Engineering Faculty Articles and Research

Optical tweezers provide a non-contact method to trap, move, and manipulate micro- and nano-sized objects. Using properly designed dielectric and plasmonic nanostructure configurations, optical tweezers have been tailored to create stable and precise trapping for nanoscale objects. Recent advances in numerical optimization techniques allow further enhancement in nanoscale optical traps through inverse optimization of such configurations. One of the main challenges in such optimization approaches is the time-consuming nature of full-wave simulation of nanostructures and postprocessing steps to extract optical forces. To address this challenge, we introduce a surrogate solver based on residual neural networks that can accurately predict the …

Aging Characteristics Of Lithium-Ion Battery Under Fast Charging Based On Electrochemical-Thermal-Mechanical Coupling Model, Dong-Xu Zuo, Pei-Chao Li

Journal of Electrochemistry

The aging characteristics of lithium-ion battery (LIB) under fast charging is investigated based on an electrochemical-thermal-mechanical (ETM) coupling model. Firstly, the ETM coupling model is established by COMSOL Multiphysics. Subsequently, a long cycle test was conducted to explore the aging characteristics of LIB. Specifically, the effects of charging (C) rate and cycle number on battery aging are analyzed in terms of nonuniform distribution of solid electrolyte interface (SEI), SEI formation, thermal stability and stress characteristics. The results indicate that the increases in C rate and cycling led to an increase in the degree of nonuniform distribution of SEI, and thus …

Optimization Of Channel Structure Of Alkaline Water Electrolyzer By Using An Expanded Mesh As A Bipolar Plate, Hai-Yan Xiong, Zhen-Xiao Zhu, Xin Gao, Chen-Ming Fan, Hui-Bao Luan, Bing Li

Journal of Electrochemistry

Alkaline water electrolysis (AWE) is the most mature technology for hydrogen production by water electrolysis. Alkaline water electrolyzer consists of multiple electrolysis cells, and a single cell consists of a diaphragm, electrodes, bipolar plates and end plates, etc. The existing industrial bipolar plate channel is concave-convex structure, which is manufactured by complicated and high-cost mold punching. This structure still results in uneven electrolyte flow and low current density in the electrolytic cell, further increasing in energy consumption and cost of AWE. Thereby, in this article, the electrochemical and flow model is firstly constructed, based on the existing industrial concave and …

Chinese Chemical Society: First Young Scholars' Symposium On Electrosynthesis Held Successfully, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.