Mining Engineering Commons^™

Wall Control Blasting At The Orphan Boy Mine – Butte, Montana, Jewel Sakyi

Graduate Theses & Non-Theses

Blasting is often conducted to produce desirable fragment sizes to minimize production cost and energy consumption in downstream processes, including loading, hauling, and crushing. However, the venting of explosive energy in the rock formation sometimes causes unwanted damage beyond the desired perimeter of the blast area. Control blasting has mainly been used in surface mining operations to minimalize blast damage. To explore the applicability of control blasting in underground mining operations, protect the safety of students, faculty, and staff, prevent overbreak, and to ensure the stability of openings and workings, four experimental control blasts, comprising of three smooth blasts and …

Venezuela Undermines Gold Miner Crystallex's Attempts To Recover On Its Icsid Award, Sam Wesson

Loyola of Los Angeles International and Comparative Law Review

No abstract provided.

Understanding The Connection Between Blasting And Highwall Stability, Robert Quentin Eades, Kyle A. Perry

Mining Engineering Faculty Research & Creative Works

Surface mines continue to implement highwalls for several reasons, such as increasing recovery, improving margins, and justifying higher stripping ratios. Highwall stability is a complex issue that is dependent upon a variety of mining and geologic factors, and a safe design is necessary for a successful surface operation. To improve highwall stability, it is important to understand the connection between local geology and blasting. Explosives are employed throughout the mining industry for primary rock breakage. There are a number of controlled blasting techniques that can be implemented to improve highwall stability. These include line drilling, smooth wall blasting, trim blasting, …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

The Status Of The Local Community In Mining Sustainable Development Beyond The Triple Bottom Line, Sisi Que, Liang Wang, Kwame Awuah-Offei, Yao Chen, Wei Yang

Mining Engineering Faculty Research & Creative Works

Mineral products provide essential fuels and raw materials for industrialization and our daily life, but their influences on other aspects of life need to be taken into consideration. While the whole world benefits from mining's contributions, most of the resulting detrimental impacts on the environment and society fall on the local communities. The participation of the local community is one solution to decrease the risks from community-related problems. Subsequently, the requirements of mining sustainable development can be met. A literature review was conducted on mining sustainability and stakeholder participation, and the shortcomings of existing research and difficulties of further study …

Implementing An Ore Reconciliation System Supported By Statistical Process Control, Bryan Nielson

Graduate Theses & Non-Theses

There are several stages within mine planning that utilize different block models to help predict future values. Ore reconciliation manages the variance observed between the forecasted values from these block models and actual production data. This paper primarily focuses on an ore reconciliation system that was developed for an open pit copper operation located in the Western United States. A monthly reconciliation approach has been setup in a stepwise format along the mine value chain. Mine call factors are calculated each month for each step within the operation’s mining process to measure the variance between predicted values and production data. …

Montana Tech's Underground Mine Education Center, Scott Rosenthal, Pete Knudsen

Mining Engineering

SME Annual Meeting, Feb. 24-27, 2018, Denver, CO. Preprint 19-057.

Discusses development and use of the Montana Tech Underground Mine Education Center (UMEC).

Investigation Of Environmental Cadmium Sources In Eastern Kentucky, Elizabeth Maher

Theses and Dissertations--Mining Engineering

Utilizing data collected by the University of Kentucky Lung Cancer Research Initiative (LCRI), this study investigated potential mining-related sources for the elevated levels of cadmium in Harlan and Letcher counties. Statistical analyses for this study were conducted utilizing SAS. A number of linear regression models and logarithmic models were used to evaluate the significance of the data. The linear regression models consisted of both simple and multivariate types, with the simple models seeking to establish significance between the potential sources and urine cadmium levels and the multivariate models seeking both to identify any statistically significant linear relationships between source types …

Numerical Analysis Of Stress Distributions For Multiple Backfilled Stopes, Christopher Richard Newman

Theses and Dissertations--Mining Engineering

Over the past three decades, technological innovations with respect to cemented paste backfill (CPB) as a means of ground support has allowed for increased production within the mining industry, management mine waste costs, as well as the improvement of the overall health and safety of underground mining operations. Despite the extensive use of this relatively new ground support material, many fundamental factors affecting the design of safe and economical CPB structures are still not well understood.Recently, a significant amount of academic and industry research has been conducted to better understanding the distribution of stress with respect to primary-secondary extraction sequencing …

Improving Workers' Safety And Health In The Zimbabwean Mining And Quarrying Industry, Bernard Mabika

Walden Dissertations and Doctoral Studies

Lack of effective occupational safety and health (OSH) strategies is a reason that

workplace accidents in the mining and quarrying industry remain high, making the

industry one of the riskiest operations worldwide. The purpose of this multiple case study

was to explore successful strategies mining and quarrying leaders in Zimbabwe used to

improve OSH. The key research question addressed successful strategies leaders in the

mining and quarrying industry use to improve employee occupational safety and health in

Zimbabwe. Six successful business leaders from 3 mining and quarrying mines in

Zimbabwe demonstrated an exception to unsafe practices, particularly through their

exceptional …

The Effect Of Overloading On Reliability Of Wheel Loader Structural Components, Eric Raymond Achelpohl

Doctoral Dissertations

"This research attempts to provide a fundamental understanding into the relationship between the productivity of material handling equipment, specifically wheel loaders, and their ability to operate reliably when subjected to high overload conditions. The overall aim is to determine the effect of overloading the bucket on wheel loader reliability. The specific objectives of the research are to: 1) evaluate the effect of overloading the bucket on wheel loader productivity; 2) examine the effect of overloading the bucket on hydraulic pressures in the hoist cylinders (used as a proxy for forces on a wheel loader); and 3) investigate the effect of …

Comparing Distributed Acoustic Sensing To Three-Component Geophones In An Underground Mine, Nikolas Nesladek

Graduate Theses & Non-Theses

Geophones have become the industry standard for seismic data collection. However, a relatively new method is gaining popularity called Distributed Acoustic Sensing (DAS). DAS uses changes in backscattered light of a fiber-optic cable to detect strain from acoustic energy. The purpose of this project was to make a direct comparison between DAS and three component geophones, specifically in a mining setting. Experiments were done in the Underground Education Mining Center on the campus of Montana Tech. The sources used for this project were vertical sledgehammer shots, oriented shear sledgehammer shots, and blasting caps set off in both unstemmed and stemmed …

Responsiveness Of Mining Community Acceptance Model To Key Parameter Changes, Mark Kofi Boateng, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

The mining industry has difficulties predicting changes in the level of community acceptance of its projects over time. These changes are due to changes in the society and individual perceptions around these mines as a result of the mines' environmental and social impacts. Agent-based modeling can be used to facilitate better understanding of how community acceptance changes with changing mine environmental impacts. This work investigates the sensitivity of an agent-based model (ABM) for predicting changes in community acceptance of a mining project due to information diffusion to key input parameters. Specifically, this study investigates the responsiveness of the ABM to …

Determine The Potential Drill Utilization Improvements And Rock Fragmentation Requirements Using Directional Drilling In A Coal Mining Overburden Highwall Application, K. D. Dill, S. D. Rosenthal

Mining Engineering

This project analyzed the efficiency of incorporating the use of directional drilling technology into coal overburden blasting. Directional drilling is currently in use in the petroleum industry and it is believed that it will be a valuable asset in the mining industry. This project has shown that directional drilling can be a viable technology for use in the coal overburden removal process resulting in increased drill utilization and potential for cost savings. Future work regarding blasting and geotechnical evaluation should be performed to solidify the concept.

Embrace The Unknown: Stop Saying “It’S Too Hard” And Start Embracing Uncertainty In Your Mine Plans, C. Roos

Mining Engineering

Nearly every input to a mine plan is based on an estimate. The estimates may be from sample data, historical information, models, or personal opinion, but in all cases, these values are simply expected values (means). In real life, we do not get to iterate the exact conditions at our mining operation many times to ensure that that average value is attained. The expected value also tells us nothing about the spread of values that that input might take on. The result is a significant amount of unquantified uncertainty in our mine plans. Unfortunately, it is often too expensive or …

Evaluation & Selection Of Novel Surveying Systems For Use In Surface Coal Mining, M. Drake, C. Roos, P. Conrad, T. Stack

Mining Engineering

This paper presents the evaluation Montana Tech completed for the Western Energy Company Rosebud Mine relating to the benefits of survey data collected using novel technologies over traditional methods for topographic surveys. These technologies include Unmanned Aircraft Systems (UAS), photogrammetry, and laser scanning/LIDAR. Utilizing these technologies, large areas such as reclamation areas and cast blasts can be surveyed in a timely manner for use by the mining operation. The areas that were evaluated were the improvements in the safety of employees and the time required to collect data. In addition, there is also a potential cost savings for the operation, …

Electromagnetic Signal Feedback Control For Proximity Detection Systems, Adam K. Smith

Dissertations, Master's Theses and Master's Reports

Coal is the most abundant fossil fuel in the United States and remains an essential source of energy. While more than half of coal production comes from surface mining, nearly twice as many workers are employed by underground operations.

One of the key pieces of equipment used in underground coal mining is the continuous mining machine. These large and powerful machines are operated in confined spaces by remote control. Since 1984, 40 mine workers in the U. S. have been killed when struck or pinned by a continuous mining machine. It is estimated that a majority of these accidents could …

The Andacollo's Mining Community: Ethnographic Work-Based Approach To Corporate Social Responsibility Policies And Practices, Ubirata De Oliveira

Walden Dissertations and Doctoral Studies

This ethnographic study was designed to explore the phenomenon of corporate social responsibility (CSR) in the mining industry. The research addressed the impacts of a problematic, systemic, and ethnocentric (top-down) CSR approach driven by a transnational mining company, and proposed a novel cultural relativist (bottom-up) CSR approach looking at the social needs of the community. Solving the problem stemming from the ethnocentric approach is important for both the mining company and the community affected by the CSR program, as it will alter dynamics between actors and mitigate social conflicts. The purpose of this study was to investigate factors that improve …

Stochastic Modeling And Dem Simulation Of Granular Media Subsidence Due To Underground Activity, Rodrigo Borela Valente

Open Access Theses

Many communities around the world have been established in areas of ongoing, as well as ceased, underground mining activity. Ground movements induced by ore extraction methods and the collapse of abandoned cavities have long been recognized as a hazard to surface structures. A number of approaches have been proposed for the prediction of subsidence in underground mining regions, and their integration to Geographic Information Systems (GIS) can produce a powerful risk management tool. Nevertheless, this application is often limited by either a lack of generality or excessive computational cost of the methods available.

In this work, the stochastic subsidence model …

Eliciting Drivers Of Community Perceptions Of Mining Projects Through Effective Community Engagement, Liang Wang, Kwame Awuah-Offei, Sisi Que, Wei Yang

Mining Engineering Faculty Research & Creative Works

Sustainable mining has received much attention in recent years as a consequence of the negative impacts of mining and public awareness. The aim of this paper is to provide mining companies guidance on improving the sustainability of their sites through effective community engagement based on recent advances in the literature. It begins with a review of the literature on sustainable development and its relationship to stakeholder engagement. It then uses the literature to determine the dominant factors that affect community perceptions of mining projects. These factors are classified into five categories: environmental, economic, social, governance and demographic factors. Then, we …

A Life Cycle Assessment Of A Uranium Mine In Namibia, Janine Lambert

USF Tampa Graduate Theses and Dissertations

Uranium mining and nuclear power is a controversial topic as of late, especially in light of the recent Fukushima event. Although the actual use of nuclear fuel has minimal environmental impact, its issues come at the very beginning and end of the fuel’s life cycle in both the mining and fuel disposal process. This paper focuses on a life cycle analysis (LCA) of uranium mine in the desert nation of Namibia in Southern Africa. The goal of this LCA is to evaluate the environmental effects of uranium mining. The LCA focuses on water and energy embodiment such that they can …

Bio-Physical Closure Criteria Without Reference Sites: Realistic Targets In Modified Rivers, Melanie L. Blanchette, Mark Lund, Robyn Stoney, Digby Short, Colm Harkin

Research outputs 2014 to 2021

The use of reference sites for establishing closure criteria in areas disturbed by mining activities is common practice. ‘Reference’ sites are those considered to be largely unimpacted by anthropogenic activity (retaining desirable natural characteristics), and occurring near disturbed sites. Sites are considered rehabilitated when their biophysical condition approximates that of the reference site. However, this approach often creates impossible or unrealistic targets for miners seeking to close rehabilitated lands. For example, reference sites are often limited in availability (or non-existent) due to impacts by other land uses. Further, any available reference sites might not be realistic matches for the rehabilitated …

Energy Efficiency And Carbon Dioxide Emissions Across Different Scales Of Iron Ore Mining Operations In Western Australia, Shanuka Dilhani Palamure

Theses: Doctorates and Masters

During the last two decades, Western Australian iron ore mining industry experienced an exponential production growth arising from increased global demand for steel. The upturn in the iron ore price and considerably lower production cost encouraged extensive mining and consequently high-grade ore reserves were gradually depleted. Despite the energy-intensive nature of mining, high profitability motivated the mining companies to extract marginal-grade deposits with additional processing requirements, which increased energy consumption and ultimately increased the cost of iron ore production. This thesis sought to identify the energy efficiencies of open-cut iron ore mining operations, in terms of scale of operation as …

Investing In Least Developed Countries: The Aynak Copper Mine Project, Roosevelt Barfield

Walden Dissertations and Doctoral Studies

The rise of market globalization creates challenges for business executives seeking to pursue foreign direct investment (FDI) in least developed countries (LDC), such as Afghanistan. Multinational corporate (MNC) executives need strategies that will improve the timely delivery of minerals for mining projects in LDCs. Guided by the force field analysis theory, the purpose of this holistic, single-case study was to explore the strategy that 5 MNC executives in Beijing, China, used to improve the timely delivery of minerals associated with the Aynak copper mine project in Afghanistan. Semistructured interviews were used to elicit detailed narratives from MNC executives about their …

Gravity And Magnetic Investigations Into Possible Economic Mineral Deposits Within The Northwest St. Francois Terrane, Southeastern Missouri, Brandon Todd Ives

Graduate Theses/Dissertations

The exposed Precambrian St. Francois Mountains in southeast Missouri are a well-studied terrane of rhyolites, granites, and basaltic dikes, but much of the buried basement lithology west of the exposed region is still poorly delineated. The western St. Francois is host to large hydrothermal Pb-Zn and Fe-oxide ore deposits, some of which were located with previous geophysical investigations. The economic ore deposits specifically in the Pea Ridge Mine in Washington County contain known economic minerals and rare earth element deposits. In order to further investigate the Precambrian basement lithologies and the possible locations of additional economic ore deposits, a gravity …

Industry Career Guide: Mining, Roberto Raymundo

Angelo King Institute for Economic and Business Studies (AKI)

The mining industry in the Philippines plays a very significant role in the pursuit of industrial development because of the sector’s ability to provide mineral resources that serve as raw materials for manufacturing, construction, the utilities as well as the transportation and communications sector. It is also a major contributor of foreign currency through the exports of mineral ore and other processed mineral products and provides employment to communities in far flung areas where the only source of economic activity is mining operations. The extraction of copper, gold, silver, nickel, coal, gas, oil, stone and gravel as well as finding …

The Relative Effect Of Charge Dimensions On Elastic Vibration Attenuation And Blast-Induced Seismic Energy Concepts, Nathan Thomas Rouse

Doctoral Dissertations

"This dissertation focuses on expanding the blasting industry's current understanding of the effect of charge geometry on blast vibration attenuation. The work includes a multiple regression analysis of a sample population of signature hole blast vibration data. The regression analysis is used to identify the relative effect of the variables that affect blast vibrations at various distances from the charge. The study suggests that the most common vibration models used in the blasting industry do not use all of the statistically significant variables. Therefore, the models neglect to fully describe the relationship between the significant variables and the blast vibration. …

Mapping Licit And Illicit Mining Activity In The Madre De Dios Region Of Peru, Arthur Elmes, Josué Gabriel Yarlequé Ipanaqué, John Rogan, Nicholas Cuba, Anthony J. Bebbington

Geography

Since the early 2000s, the Madre de Dios Region of southern Peru has experienced rapid expansion of both licit and illicit mining activities, in the form of artisanal and small-scale mining (ASM). ASM typically takes place in remote, inaccessible locations and is therefore difficult to monitor in situ. This paper explores the utility of Landsat-5 imagery via decision tree classification to determine ASM locations in Madre de Dios. Spectral mixture analysis was used to unmix Landsat imagery, using WorldView and QuickBird l imagery to aid spectral endmember selection and validate AMS maps. The ASM maps had an overall area-weighted accuracy …

Keeping Civilization From Collapsing, Thomas W. Camm

Mining Engineering

No abstract provided.

A Framework For Understanding The Public's Perspectives Of Mining Applied To The Kentucky Coal Industry, Joshua M. Hoffman

Theses and Dissertations--Mining Engineering

People’s perceptions of mining are heavily based on the media they consume and the messages therein. News outlets ordinarily report on mining only when there is an accident or environmental concern. When messages that the public is exposed to are negative, it is no wonder that there are negative perceptions about mining.

Current public relations campaigns on the behalf of specific companies or select sectors do exist; however, this is often a reactionary move in response to recent shifts in the socio-political environment. The details of these campaigns are often tied up in proprietary information or withheld by public relations …