Mining Engineering Commons^™

Introductions And Applications Of A Self-Locking Wire-Line Coring System With A Water-Shielding Bit And A Circlip-Shielded Core Barrel, Liao Yuansu, Hu Qifeng

Coal Geology & Exploration

Introductions and applications of a self-locking wire-line coring system with a water-shielding bit and a circlip-shielded core barrel

Hazard Source Effect And Location Experiment Of Concealed Water Disaster In Coal Seam Floor, Li Panfeng

Coal Geology & Exploration

Hazard source effect and location experiment of concealed water disaster in coal seam floor

Prediction Of The Height Of Water Flowing Fractured Zone Based On Pso-Bp Neural Network, Lou Gaozhong, Tan Yi

Coal Geology & Exploration

Prediction of the height of water flowing fractured zone based on PSO-BP neural network

Hydraulic Connection Of Aquifers In Barapukuria Coal Mine, Bangladesh, Yu Bo, Wang Hao, Liu Feng, Liu Ji, Wang Qiangmin, Shang Hongbo

Coal Geology & Exploration

Hydraulic connection of aquifers in Barapukuria Coal Mine, Bangladesh

Regularity And Control Of Overburden And Surface Fractures In Shallow-Contiguous Seams, Cao Jian, Huang Qingxiang

Coal Geology & Exploration

Regularity and control of overburden and surface fractures in shallow-contiguous seams

Improvement Of Shear Strength And Anti-Disintegration Performance Of Compacted Loess, Zhu Yanbo, Li Hongfei, Ju Zhitong, Lan Hengxing, Liu Zhenqian, Han Yutao

Coal Geology & Exploration

Improvement of shear strength and anti-disintegration performance of compacted loess

Study On The Strength And Microstructure Of Loess Under Freeze-Thaw Based On Temperature Path, Long Jianhui, Zhang Lingling, Xing Xianli, Guo Xiaojuan

Coal Geology & Exploration

Study on the strength and microstructure of loess under freeze-thaw based on temperature path

Exploring The Deformation Mechanics Of Coal Ribs Using The Distinct Element Modeling Approach, Maurice Sunkpal, Taghi Sherizadeh

Mining Engineering Faculty Research & Creative Works

Understanding coal rib geomechanics is essential for improving rib stability and eliminating fatality and injury trends due to rib failures. There are presently no standardized rib control practices available in most countries. In light of this observed dearth, this investigation aims to improve understanding of rib failure mechanisms using the distinct element modeling (DEM) technique. DEM is chosen because of its superior advantage to explicitly represent discontinuities and their constitutive behaviors, besides that of the intact rock matrix. To analyze the rib stability, a numerical monitoring protocol is implemented to monitor the deformation characteristics of the coal rock mass as …

Earth Imaging From The Surface Of The Moon With A Dscovr/Epic-Type Camera, Nick Gorkavyi, Simon Carn, Matt Deland, Yuri Knyazikhin, Nick Krotkov, Alexander Marshak, Et Al.

Michigan Tech Publications

The Earth Polychromatic Imaging Camera (EPIC) on the Deep Space Climate Observatory (DSCOVR) satellite observes the entire Sun-illuminated Earth from sunrise to sunset from the L1 Sun-Earth Lagrange point. The L1 location, however, confines the observed phase angles to ∼2°–12°, a nearly backscattering direction, precluding any information on the bidirectional surface reflectance factor (BRF) or cloud/aerosol phase function. Deploying an analog of EPIC on the Moon’s surface would offer a unique opportunity to image the full range of Earth phases, including observing ocean/cloud glint reflection for different phase angles; monitoring of transient volcanic clouds; detection of circum-polar mesospheric and stratospheric …

Flow Characterization In Mine Ventilation Fan Blade Design Using Cfd, Anwar Endris Hassen

Journal of Sustainable Mining

In axial ventilation fans, the generation of a uniform flow velocity is desirable for better efficiency. To that end, different fan blade types have been developed to achieve better flow uniformity. This article aimed to characterize the flow distribution and its uniformity in four blade designs, namely constant chord, tapered blade, skewed blade, and tapered skewed blade, using Computational Fluid Dynamics (CFD). The study employs an iterative study where key study decisions are made as the study progresses. The study began with the selection of a blade profile for the study. A comparative study between the NACA seven-digit and four-digit …

Data Management System For A Semiautonomous Shuttle Car For Underground Room And Pillar Coal Mines, Vasilis Androulakis, Steven Schafrik, Joseph Sottile, Zacharias Agioutantis

Mining Engineering Faculty Publications

In recent years, autonomous solutions in the multidisciplinary field of mining engineering have been an extremely popular applied research topic. This is a result of the increasing demands of society on mineral resources along with the accelerating exploitation of the currently economically viable resources, which lead the mining sector to turn to deeper, more-difficult-to-mine orebodies. An appropriate data management system comprises a crucial aspect of the designing and the engineering of a system that involves autonomous or semiautonomous vehicles. The vast volume of data collected from onboard sensors, as well as from a potential IoT network dispersed around a smart …

Geoindicators For Assessing Illegal Gold Mining Environmental Impacts In Choco, Colombia, Jennifer Angel-Amaya

International Programs

In Choco artisanal gold mining has been made for centuries. However, since 2009, with the rise in gold prices, alluvial mining has been mechanized causing social and environmental devastation.

Colombia´s T-622 (2016) ruling calls for the restoration of affected areas. Geoindicators could be used to assess the environmental impacts prior restoration.

Evaluating Mine Design Alternatives For Social Risks Using Discrete Choice Analysis, Kwame Awuah-Offei, Sisi Que, Atta Ur Rehman

Mining Engineering Faculty Research & Creative Works

As with other engineering design tasks, mine design involves setting design objectives and constraints (the feasible solution space) and finding the optimal design alternative. Mine engineers often struggle to incorporate the preferences of local community members into their evaluation of mine design alternatives because the mining literature lacks tools to quantify such risks during mine planning. This paper presents an approach to evaluate community acceptance (i.e., community preferences for the alternatives) using discrete choice models and decision-based design during mine planning. Using discrete choice models and a rigorous framework, engineers can estimate the cost of social risks as a function …

Findings Report: Virtual Workshop On ‘Resilient Supply Of Critical Minerals’, Marek Locmelis, Angela D. Lueking, Michael S. Moats, Kwame Awuah-Offei, Lana Z. Alagha, Mark W. Fitch, Alanna Krolikowski, Shelby Clark

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Executive Summary
On August 2-3, 2021, the Thomas J. O’Keefe Institute for Sustainable Supply of Strategic Minerals at Missouri University of Science and Technology (Missouri S&T) hosted the NSF-funded virtual workshop ‘Resilient Supply of Critical Minerals’. The workshop was convened via Zoom and attracted 158 registrants, including 108 registrants from academia (61 students), 30 registrants from government agencies, and 20 registrants from the private sector. Four topical sessions were covered:

A. Mineral Exploration and Source Diversification.
B. Supply Chain and Policy Issues.
C. Improving Mineral Recycling and Reprocessing Technologies.
D. Technological Alternatives to Critical Minerals.

Each topical session was composed …

Application Of Synthetic Aperture Radar Interferometry To Monitor Surface Deformations Of The Trans-European Transport Network (Ten-T) – A Case Study Of The Motorways Crossing Areas Of Mining Operations In The Upper Silesian Coal Basin, Poland, Adam Smoliński, Mariusz Stawinoga, Tomasz Pindel

Journal of Sustainable Mining

Underground hard coal mining causes surface deformations. When the mining operations are conducted beneath linear objects, such as motorways, there is a risk of deformations of the axis of the road and its horizontal and vertical alignment (additional bends and vertical curvatures, longitudinal inclinations, deformations of crosssections). In the areas subjected to mining operations, mining plants conduct geodetic monitoring. Due to their labour intensity and costs, geodetic measurements are usually made only a few times a year. The article discusses the possibility of applying Interferometric Synthetic Aperture Radar (InSAR) to monitor the subsidence of the vertical alignment of motorways caused …

Adapting Open Pit Mine Design Fundamentals To Leverage The Advantages Of Autonomous Haulage Systems, Race Owens

Graduate Theses & Non-Theses

It is common practice, and even legally required in many jurisdictions, to design two-lane haul roads in open pit mines to three and a half times the widest dimension of the haul trucks operating on the road. In open pit gold mines with high strip ratios, the road width has a significant impact on the economics of a design. It is possible to minimize the flattening of the highwall if the road width is reduced, assuming the width used is not needed to flatten the slopes for geotechnical purposes. With the use of autonomous haulage and pull-outs, it may be …

Remote Sensing-Based Statistical Approach For Defining Drained Lake Basins In A Continuous Permafrost Region, North Slope Of Alaska, Helena Bergstedt, Benjamin M. Jones, Kenneth M Hinkel, Louise Farquharson, Benjamin V. Gaglioti, Andrew D. Parsekian, Mikhail Kanevskiy, Noriaki Ohara, Amy L. Breen, Rodrigo C. Rangel, Guido Grosse, Ingmar Nitze

Michigan Tech Publications, Part 1

Lake formation and drainage are pervasive phenomena in permafrost regions. Drained lake basins (DLBs) are often the most common landforms in lowland permafrost regions in the Arctic (50% to 75% of the landscape). However, detailed assessments of DLB distribution and abundance are limited. In this study, we present a novel and scalable remote sensing-based approach to identifying DLBs in lowland permafrost regions, using the North Slope of Alaska as a case study. We validated this first North Slope-wide DLB data product against several previously published sub-regional scale datasets and manually classified points. The study area covered >71,000 km2, including a …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Research On Green Coal Mining Strategy In Hedong Coalfield Based On Resource And Geological Environment Characteristic, Liu Hanbin, Cheng Fangqin

Coal Geology & Exploration

Hedong Coalfield is located in the Loess Plateau of western Shanxi province at the western foot of the Lvliang Mountains in the middle reaches of the Yellow River. It is an important coking coal producing area, with severe soil erosion, fragile ecological environment, frequent occurrence of geological disasters and karst spring distribution in China. Through the analysis of resource and geological environment characteristics of Hedong Coalfield, it is found that the scarce coking coal reserves in Liliu mining area in the middle of the coalfield account for 70.8% of the total reserves. But its development intensity is higher than the …

Organic Geochemistry Of The Jurassic Tar-Rich Coal In Northern Shaanxi Province, Zhang Ning, Xu Yun, Qiao Junwei, Ning Shuzheng

Coal Geology & Exploration

The organic geochemical characteristics of tar-rich coal are of great significance to study the paleosedimentary environment and evolution of coal seams. Taking coal samples from 6 main coal seams of Yan’an Formation in Northern Shaanxi Province as the research object, this paper analyses the organic geochemical characteristics of coal seams by coal quality analysis and gas chromatography-mass spectrometry. The results showed that coal samples had a high abundance of chloroform asphalt "A" and a low saturated hydrocarbon/aromatic hydrocarbon ratios, characterized by the unimodal pattern of n-alkanes and dominated by medium chainsaturated hydrocarbons. The ratios of Pr/C₁₇, Ph/C_{18 …}

Occurrence Characteristics Of Carboniferous-Permian Tar-Rich Coal And Its Influencing Factors In Northern Shaanxi, Yao Zheng, Luo Qianzhou, Li Ning, Li Huabing, Wang Qiang, Gao Jun

Coal Geology & Exploration

The rational development of tar-rich coal is of great significance to promote clean and efficient utilization of coal, improve the independent guarantee ability of oil and gas, and achieve carbon emission peak and carbon neutrality. In order to find out the occurrence characteristics of tar-rich coal in the typical mining areas of Carboniferous-Permian coalfield in Northern Shaanxi, based on coal exploration data and sample test results, this paper compares the tar yield of mineable coal seams, summarizes the spatial-temporal distribution rules of tar-rich coal, and discusses the occurrence influential factors. The results show that the average tar yield of mineable …

Gas Drainage Borehole Completion Technology Of Directional Long Hole Drilling With Negative Angle, Ma Zan, Chen Dongdong, Xie Hengxing, Chen Tianzhu, Wang Bin, Jia Bingyi

Coal Geology & Exploration

Pre-drainage of coal seam gas with directional long boreholes is an effective technical means to achieve advanced control of coal mine gas area. Affected by mining deployment, negative-angle boreholes(downward holes) are widely used in production. Medium-hard coal seams have good porosity and usually do not require hole protection. However, the existing conventional methods can not effectively solve the problem of water accumulation in negative angle long boreholes. This paper takes the downward long boreholes in the No. 9 medium-hard coal seam of Longfeng Coal Mine in Guizhou as the research object. Two sets of directional long boreholes are constructed in …

The Concealed Small Faults Detection Based On Gas Drainage Boreholes Along And Cross The Coal Seam, Xue Honglai, Wen Zhe

Coal Geology & Exploration

The faults have great influence on coal and gas outburst disasters, and accurate detection of faults location is very important to prevent such disasters. At present, large number of gas drainage boreholes were drilled in coal mines, but the geological information contained in these boreholes is not fully paid attention to, thus the method to detect concealed faults by gas-drainage boreholes was proposed. In this paper, by establishing a mathematical model for fault detection based on gas drainage drilling, a three-dimensional coordinate of fault planes and coal seam floors is calculated, and basic parameters such as fault location, drop, attitude …

Quantitative Study Of 3d Numerical Simulation On Optimizing Borehole Layout Spacing Of Gas Drainage, Chen Yuexia, Chu Tingxiang, Chen Peng, Tang Yang

Coal Geology & Exploration

In order to optimize the spacing of boreholes and realize efficient drainage, based on the fluid solid coupling model, a three-dimensional geometric model was established to make it closer to the field reality, the gas drainage processes of a coal mine with different borehole spacing were simulated using COMSOL software. The results show that: the effective drainage area was visualized by the three-dimensional diagram of the isobaric surface with gas pressure of 0.74 MPa, and the influence of borehole spacing on the extraction efficiency was discussed. The results show that: the effective extraction radius is about 1.5 m during gas …

An Advanced Co2 Gas-Phase Fracturing Technology For Efficient Methane Drainage, Outburst Prevention And Excavation In Outburst Coal Seam, Yang Baige, Zhang Junsheng, Linghu Jianshe, Cao Yunxing

Coal Geology & Exploration

Coal and gas outburst in coal mines is a serious disaster in China. Although the disaster has been reduced significantly over the past 10 years, vicious accidents still occure, causing serious losses to the lives of miners and the safety of coal mines. The current applied technologies for outburst prevention and control include hydraulic fracturing, hydraulic slitting, hydraulic flushing, deep hole blasting, intensive drilling, etc., which have solved the outburst problem and safe excavation in some degrees. Nevertheless, the above-mentioned technologies could not solve the problems of safety excavation in the high gas content and low permeability outburst coal seams. …

Hydrate Reservoir Physical Properties Response And High-Pressure Gas-Water Reverse Penetration During Deepwater Oil And Gas Cementing, Zheng Mingming, Wang Xiaoyu, Zhou Kerui, Wang Kai, Wang Zhilin, Dong Gang, Wei Meng, Liu Tianle, Jia Dongyan

Coal Geology & Exploration

Well cementing is an important stage during the process of energy extraction. When deep-water oil and gas cementing encounters hydrate formations, the hydration heat of cementing slurry will cause hydrate decomposition in the reservoir near the borehole wall and reverse penetration of high-pressure gas-water. To reduce and avoid the adverse effects of hydrate decomposition, it is critical to clarify the physical response of hydrate reservoirs and the law of high-pressure gas-water reverse penetration under different cementing conditions. In this paper, a two-dimensional cementing numerical model is established according to the SH2 exploration well of GMGS-1 project in Shenhu area in …

Green Detection Method Of Coal Burning Area In Northern Shaanxi Based On Microbial Hydrocarbon Detection Technology, Duan Zhonghui, Ma Li, Hao Chun, Wang Lengyao, Mei Hai

Coal Geology & Exploration

Coal seams contain all kinds of light hydrocarbons. When coal seams are burned, the integrity of overlying strata is destroyed, which provides a good channel for hydrocarbon escape from the coal seam. This process conforms to the principle of light hydrocarbon microseepage. Then, microseepage associated microbial hydrocarbon detection technology is introduced to test its recognition ability of coal seam burning area. In Haojialiang Coal Mine of Jurassic Coalfield in northern Shaanxi, two survey lines were tested and butane bacteria was selected as microbial detection index. After microbial analysis process such as soil sampling, microbial culture, and colony count, combined with …

Feasibility Study On The Principle Of Punching-Shearing Composite Rock Fragmentation Mode Of Connecting Holes In Rock Strata, Wang Chuanliu

Coal Geology & Exploration

Replacing roadway with borehole is an important research direction of underground coal mine drilling technology, which has the advantages of high efficiency and low cost. However, in the construction of large diameter connecting holes in rock strata, the multi-stage reaming method has such problems as long lifting and drilling time and low efficiency of hole formation. This paper proposes the principle of punching-shearing composite rock fragmentation through structural and technological innovation without changing the configuration of drilling equipment. It is a creative combination of punching rock fragmentation of high-pressure water-impactor-inner bit rock and shearing rock fragmentation of drilling rig-drilling pipe-outer …

Analysis Of Interlayer Interference In Combined Development Of Coalbed Methane Wells And Discussion On Combined Production Methods：A Case Study Of Shoushan No.1 Coal Mine In Pingdingshan, Xu Yaobo

Coal Geology & Exploration

The combined development of multiple coal seams is a key technology to increase the production of single CBM wells. However, in engineering practice, most coal seams have interlayer interference problems, resulting in an insignificant increase in combined development gas production. In order to improve the gas production and development efficiency of combined development in coalbed methane wells, taking the combined production of coalbed methane in the No.4-2 coal seam and the No.2-1 coal seam of the Shoushan No.1 Coal Mine in Pingdingshan as an example, this paper analyses the influence factors and interference rules of interlayer interference, and proposes the …

Application And Development Of Permanent Magnet Torque Motor In Down-Hole Tools For Oil And Gas Drilling And Production, Li Wei, Deng Lang, Zou Xing, Xia Yang, Chen Xi

Coal Geology & Exploration

Permanent magnet torque motor is a kind of a power driving device with great development potential. It has several advantages, such as high torque density, fast response speed, strong overload capacity, high efficiency and energy saving, therefore, it possesses wide application prospects in many fields in both industrial production and daily life and so on. In view of the current application overview and technical requirements of permanent magnet torque motors in oil and gas drilling and production down-hole intelligent tools, firstly, this paper briefly introduces the structure composition and working principle of permanent magnet torque motor. Then, it elaborates the …