Mining Engineering Commons^™

Mechanism Of Aggregate Start-Up Process And Coupling Of Two-Phase Flow In Hydrodynamic Roadway, Mou Lin

Coal Geology & Exploration

Adding heat-conducting filler to the cement of the geothermal well could significantly improve the thermal conductivity of the cement stone and enhance the heat extraction effect of the geothermal well. In this study, on the basis of summarizing the heat conduction path theory and concept of high packing density, the effects of different filler types, particle sizes and dosages on the thermal conductivity of cementing cement were investigated through experiments. The test results showed that graphite had the best effect on improving the thermal conductivity of cement stone compared to other types of filler; the larger the graphite particle size, …

Hydrogeological Characteristics And Danger-Solving Mining Of Jurassic Baotashan Sandstone—A Case Study In New Shanghai No.1 Coal Mine, Lyu Yuguang, Liu Baokai, Zhao Baofeng, Lyu Wenqing, Han Gang, Wang Yongbao

Coal Geology & Exploration

In order to make up for the deficiency of the regional monitoring of the traditional gas drainage monitoring system, this paper proposes to build a borehole gas drainage monitoring system with borehole as the monitoring unit, which can dynamically grasp the drainage effect of each borehole in the process of gas drainage in real time, change the large area regional measurement into the measurement of each borehole in the region, and realize the fine monitoring of gas drainage. According to the requirements of borehole gas drainage monitoring system, combined with the characteristics of gas drainage parameters at the borehole orifice, …

Pso-Elm Prediction Model For Surface Deformation Of Mine Slope, Ning Yongxiang, Cui Ximin

Coal Geology & Exploration

During the excavation of the roadway, using reflected in-seam waves detection technique to explore the structure of roadway and accurately interpret the wave impedance interface is of signality for mine production. The method of detecting the position of faults by reflected in-seam waves is usually inaccurate, which is mainly caused by the selected deviation of reflected in-seam waves velocity. In order to reduce the selected deviation of reflected in-seam waves velocity, this paper analyzed the features of reflected in-seam waves velocity of fifteen coal seam in thirteen coal mines and the velocity relationships of reflected in-seam waves, direct in-seam waves …

Spatial Relationship Between Temperature Field, Hydrothermal Alteration And Main Faults In Shiquan County, Ankang, Xu Li, Ma Runyong, Pan Aifang, Zhang Fan

Coal Geology & Exploration

Wide-band, high-power and short-residual acoustic wave sources are the key technology for high-resolution detection of large-scale complex structures, in order to solve the contradiction between detection distance and resolution, a new acoustic wave detection instrument is developed by using the acoustic transmitter made of giant magnetostrictive material(GMM) as the source. The focal center frequency is 5 kHz, and the excitation voltage is 300-600 V, it has the characteristics of large radiated sound power, short residual vibration(3.5 cycles) and frequency band width(1-3 kHz), which solves the problem of the high resolution acoustic wave detection. Its greatest advantage is that the acoustic …

Hair Clip Type Core Lifter For Improving Coring Quality In Complex Formation And Its Ap-Plication, Liao Yuansu, Hu Qifeng, Miao Sai, Chen Haoxi, Zhuo Lianming

Coal Geology & Exploration

Based on the urgent need of accurate exploration of geological anomalous bodies such as collapse columns and small faults in underground coal mines for near-horizontal boreholes coring drilling of leakage formation, the double-wall hydraulic reverse circulation continuous coring technology was proposed, its technical principle and characteristics were analyzed, the matching ø89/42 mm double-wall coring drilling pipes and reverse circulation coring bits were developed. Three near-horizontal coring boreholes were drilled, the functional tests were carried out in a surface mine, the maximum core recovery rate of a single borehole was 83.6%, the maximum roundtrip footage was 69 m and the average …

Use Of Image Processing Algorithms For Mine Originating Waste Grain Size Determination, Sebastian Iwaszenko

Journal of Sustainable Mining

The utilization of mineral wastes from the mining industry is one of most challenging phases in the raw materials life cycle. In many countries, there are piles of mineral waste materials that date back to the previous century. There is also a constant stream of accompanying mineral matter excavated during everyday mine operation. This stream of waste matter is particularly notable for deep coal mining. Grain size composition of waste mineral matter is one of most important characteristics of coal originating waste material. This paper presents the use of image analysis for the determination of grain size composition of mineral …

Optimum Location Of Last-Mined Stope With The Influence Of Backfilling, Huawei Xu, Derek B. Apel

Journal of Sustainable Mining

Many mines in Canada have adopted sublevel stoping method or one of its variations, such as blasthole stoping (BHS) and sublevel longhole retreat (SLR), for the extraction of steeply dipping orebodies. Stope, as the basic excavated element, plays a significant role in the whole process of mining activity. In the mining method of BHS, crossing cuts are excavated at tops and bottoms in each stope for drilling blast holes and transportation of mined out orebodies. Crossing cuts failure may result in prolonged production interruption, fatality, and equipment loss. After the completion of orebodies excavation from the sublevel open stope, the …

Geochemistry, Petrology, And Palynology Of The Princess No. 3 Coal, Greenup County, Kentucky, Madison M. Hood, Cortland F. Eble, James C. Hower, Shifeng Dai

Center for Applied Energy Research Faculty and Staff Publications

The high volatile C bituminous-rank, Bolsovian-age Princess No. 3 coal, a correlative of the heavily-mined Hazard No. 7 coal and the Peach Orchard and Coalburg Lower Split coals, was investigated three sites at a mine in Greenup County, Kentucky. The coal exhibits a “dulling upwards” trend, with decreasing vitrinite and a greater tendency towards dull clarain and bone lithotypes towards the top of the coal. The relatively vitrinite-rich basal lithotype is marked by a dominance of lycopod tree spores. The palynology transitions upwards to a middle parting co-dominated by tree fern and small lycopod spores and an upper bench dominated …

Analysing User Experience Of Mobile Banking Applications In Nigeria: A Text Mining Approach, Omotosho Babatunde S.

CBN Journal of Applied Statistics (JAS)

This paper analyses textual data mined from 37,460 reviews written by mobile banking application users in Nigeria over the period November 2012 – July 2020. On a scale of 1 to 5 (5 being the best), the average user rating for the twenty-two apps included in our sample is 3.5; with the apps deployed by non-interest banks having the highest average rating of 4.0 and those by commercial banks with national authorisation having the least rating of 3.4. Results from the sentiment analysis reveal that the share of positive sentiment words (17.8%) in the corpus more than double that of …

Experimental Evaluation Of Square Ferrocement Panels Using Polypropylene Wire Mesh, N. Khurram, U. Akmal, M. Raza, A. Hameed, M. Irfan Ul Hassan

Mining Engineering Faculty Research & Creative Works

Ferrocement panels are thin section comprised of hydraulic mortar reinforced with steel wire mesh and are susceptible to micro cracks at service conditions. The moisture and rainwater may infiltrate through these cracks and cause the reduction in capacity due to the corrosion of steel wire mesh. In the present study, a polypropylene (PP) wire mesh has been used to overcome this problem. The main objective of the study is to investigate the punching shear and bending capacity of the ferrocement panels using PP wire mesh. Experimental tests conducted on 32 simply supported square slabs panels of 450x450 mm subjected to …

Version 2 Ozone Monitoring Instrument So2 Product (Omso2 V2): New Anthropogenic So2 Vertical Column Density Dataset, Can Li, Nickolay A. Krotkov, Peter J.T. Leonard, Simon Carn, Joanna Joiner, Robert J.D. Spurr, Alexander Vasilkov

Michigan Tech Publications, Part 1

The Ozone Monitoring Instrument (OMI) has been providing global observations of SO2 pollution since 2004. Here we introduce the new anthropogenic SO2 vertical column density (VCD) dataset in the version 2 OMI SO2 product (OMSO2 V2). As with the previous version (OMSO2 V1.3), the new dataset is generated with an algorithm based on principal component analysis of OMI radiances but features several updates. The most important among those is the use of expanded lookup tables and model a priori profiles to estimate SO2 Jacobians for individual OMI pixels, in order to better characterize pixel-to-pixel variations in SO2 sensitivity including over …

Constructing A Complete Landslide Inventory Dataset For The 2018 Monsoon Disaster In Kerala, India, For Land Use Change Analysis, Lina Hao, Rajaneesh A., Cees Van Westen, Sajinkumar K. S., Tapas Ranjan Martha, Pankaj Jaiswal, Brian G. Mcadoo

Michigan Tech Publications, Part 1

Event-based landslide inventories are important for analyzing the relationship between the intensity of the trigger (e.g., rainfall, earthquake) and the density of the landslides in a particular area as a basis for the estimation of the landslide probability and the conversion of susceptibility maps into hazard maps required for risk assessment. They are also crucial for the establishment of local rainfall thresholds that are the basis of early warning systems and for evaluating which land use and land cover changes are related to landslide occurrence. The completeness and accuracy of event-based landslide inventories are crucial aspects to derive reliable results …

Using Tandem-X To Measure Pyroclastic Flow Source Location, Thickness And Volume: Application To The 3rd June 2018 Eruption Of Fuego Volcano, Guatemala, F. Albino, J. Biggs, R. Escobar-Wolf, A. Naismith, M. Watson, J. C. Phillips, G. A. Chigna Marroquin

Michigan Tech Publications, Part 1

The estimation of the volume of volcanic flows during an ongoing eruption is challenging but this information is crucial for improving risk assessment and for forecasting future events. Although previous studies have shown the ability of TanDEM-X satellite data to derive the thickness and the volume of lava flow fields during effusive eruptions, the method has not been explored yet for pyroclastic flows. Using bi-static interferometry, we produce TanDEM-X DEM on Fuego volcano (Guatemala) to measure the significant topographic changes caused by the 3rd June 2018 eruption, which destroyed the town of San Miguel Los Lotes. We estimate the volume …

Improvement Of The Effectiveness Of Greywacke Crushing Process By Applying An Impact Crusher In Quarry For The Production Of Railway Ballast, Krzysztof Kurus, Karolina Jąderko-Skubis

Journal of Sustainable Mining

The production of aggregates in rock mining requires an optimal system of crushers, separators and conveyors. Proper machine selection allows to obtain aggregates with appropriate technical parameters and increase the output of required fractions with a given unit cost. The usage of rock raw materials for the production of railway ballast used in the railway track superstructure is connected with the necessity to meet strictly defined quality requirements.

This paper presents an example of the use of an impact crusher in a selected quarry for the purpose of obtaining the correct parameters of railway ballast and a suitable grain curve. …

Life Cycle Assessment To Demonstrate How Automation Improves The Sustainability Performance Of An Underground Mining Operation, Kyle Moreau, Corey Laamanen, Ron Bose, Helen Shang, John A. Scott

Journal of Sustainable Mining

The worldwide move to introduce more automation into underground metal ore mining is currently aimed at improving both operational productivity and safety. We have used a comparative life cycle assessment (LCA) as a novel approach for the industry to determine the beneficial impacts automation can also have on environmental performance using data collected on mine site productivity and energy consumption. The LCA looked at four impact categories: global warming potential, acidification, eutrophication, and human toxicity. When comparing key automated equipment to their traditional manual counterpart, all four impact categories experienced a reduction with automation and a subsequent improvement in sustainability …

Explosive Compaction Of Additively Manufactured Material, Phillip R. Mulligan, Cody Lough, Douglas A. Bristow, Edward Kinzel, Catherine E. Johnson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Selective Laser Melting (SLM) is an additive manufacturing (AM) technique that uses a laser to locally fuse material in a metal-powder bed. The process is performed in layers enabling significant geometric freedom over traditional manufacturing techniques. During the deposition process, the metal is locally melted and rapidly self-quenched, leading to rapid solidification with well-defined melt-pool boundaries. Analogies are often drawn to the microstructure created in welding, albeit extending to the entire part. The SLM process parameters are optimized to produce near full density metal parts. The process parameters can also be adjusted to produce local regions that are of unmelted …

Effects Of Inert Additives On Cyclotrimethylene-Trinitramine (Rdx)/Trinitrotoluene (Tnt) Detonation Parameters To Predict Detonation Synthesis Phase Production, Martin Langenderfer, William Fahrenholtz, Catherine E. Johnson

Materials Science and Engineering Faculty Research & Creative Works

A methodology was developed to predict pressure and temperature regimes achieved during detonation of RDX/TNT compositions with inert granular inclusions. The predicted pressures and temperatures are used as inputs for thermochemical simulations to design detonation synthesis experiments that utilize shock-induced chemical reactions to produce ceramic nanomaterials. This study computationally assessed the effects of inert spherical sand inclusions and porosity produced by inert additives on the sensitivity of the explosive composition during the shock-to-detonation transition using a limited scope approach through Lee-Tarver ignition and growth modeling. On the continuum scale, the effects of inert additives on pressure generation behind the detonation …

Effect Of Geometry And Fluid Viscosity On Dynamics Of Fluid-Filled Cracks: Insights From Analog Experimental Observations, Haitao Cao, Ezequiel F. Medici, Gregory P. Waite, Roohollah Askari

Michigan Tech Publications, Part 1

Fluid-filled volumes in geological systems can change the local stress field in the host rock and may induce brittle deformation as well as crack propagation. Although the mechanisms relating fluid pressure perturbations and seismicity have been widely studied, the fluid-solid interaction inside the crack of a host rock is still not well understood. An analog experimental model of fluid intrusion in cracks between planar layers has been developed to study stress conditions at the margins and tips. A combined high-speed shadowgraph and a photoelasticity imaging system is used to visualize the fluid dynamics and induced stresses on the solid matrix. …

Modeling The Load Of Sars-Cov-2 Virus In Human Expelled Particles During Coughing And Speaking, Yang Wang, Guang Xu, Yue-Wern Huang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Particle size is an essential factor when considering the fate and transport of virus-containing droplets expelled by human, because it determines the deposition pattern in the human respiratory system and the evolution of droplets by evaporation and gravitational settling. However, the evolution of virus-containing droplets and the size-dependent viral load have not been studied in detail. The lack of this information leads to uncertainties in understanding the airborne transmission of respiratory diseases, such as the COVID-19. In this study, through a set of differential equations describing the evolution of respiratory droplets and by using the SARS-CoV-2 virus as an example, …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Evaluation And Analysis Of Paleoenvironments Of The Neogene Oil Shale Of Zhangcun Formation, Qinshui Basin, Liu Yanhai, Li Kunjie, Liu Dongna, Xue Shubin, Liu Yangfe, Chu Yonghui

Coal Geology & Exploration

In order to deeply analyze the indication of oil shale development characteristics on paleoenvironments and provide theoretical guidance for oil shale resource evaluation, the organic geochemistry and elemental geochemistry characteristics of the Neogene Zhangcun Formation oil shale in the central part of the Qinshui basin were analyzed by Rock-Eval and TOC and the paleoclimate and paleogeographic environments of the depositional period were discussed as well. The results show that the oil shale of Zhangcun Formation has the low oil content which Tar=4.15%, higher hydrocarbon potential, kerogen is of sapropel type(I₁), which has relatively shallow burial depth. The element …

Pyrolysis Characteristics And Pyrolysis Product Composition Of Bituminous Coal Under Weak Oxidizing Atmosphere, Zang Libin, Cui Hufeng, Li Qingchun

Coal Geology & Exploration

In order to improve the light tar and gas yield, the yield distribution and composition characteristics of pyrolysis products of bituminous coal from Shaanxi Hongliulin in the nitrogen atmosphere and weak oxygen atmosphere were studied in a fixed bed reactor. The results showed that the yield of char and tar were reduced under the weak oxygen atmosphere, and the yield of CO and CO₂ increased significantly, leading to the increase of total gas yield. Due to the oxidation combustion reaction, the yield of H₂, CH₄ and C₂-C₃ gradually decreased with the increase of …

Aggregation And Sedimentation Experiments Of Coal Fines With Different Particle Sizes During Cbm Development, Wei Yingchun, Cui Maolin, Zhang Jin, Meng Tao, Yao Zheng

Coal Geology & Exploration

During the development process of coalbed methane, the aggregation and sedimentation of coal fines can block the migration channel of coalbed methane and lead to accidents such as stuck pump and buried pump. In order to find out the aggregation and sedimentation characteristics of coal fines with different particle sizes, the aggregation and sedimentation experiments of coal fines with the particle size>140 mesh(<106 μm), 70 to 140 mesh(106-212 μm) and 50 to 70 mesh(212-300 μm) in deionized water were carried out. The aggregation and sedimentation characteristics of coal fines with different particle sizes in deionized water suspension were investigated from the suspension observation, the concentration characteristics of coal fines and the particle size distribution of coal fines in suspension. The results show that with the increase of the time, the color of coal fines suspension becomes lighter to different degrees, and the stratification of coal fines suspension gradually appears, and the suspension of coal fines with the particle size more than 140 mesh was the first to stratify among three suspensions. The smaller the particle sizes of coal fines, the more coal fines float on the top of the suspension, and the larger the particle sizes of coal fines, the more coal fines sink to the bottom of the suspension. The concentration of coal fines in the suspensions decreased to different degrees with the increase of the time. The concentration of coal fines decreased the fastest within 3 minutes after stopping the stirring. The concentration of coal fines with the particle sizes of 70 to 140 mesh in suspension was the largest among three suspensions. According to the particle size distribution curves, the process of aggregation and sedimentation of coal fines was divided into three stages: single peak to double peak(rapid floating and settlement of coal fines), double peak to single peak(rapid accumulation and settlement of coal fines) and single peak(slow sedimentation of coal fines). Coal fines with particle size more than 140 mesh in the suspension was the first to reach the stage of slow sedimentation, and coal fines with particle size of 70-140 mesh in the suspension reached the stage of slow sedimentation at the latest among three suspensions. The mechanism of aggregation and sedimentation of coal fines was discussed from the aspects of the force of coal fines, the extended DLVO theory, and the organic molecular structure of coal fines. The coal samples contain a large number of hydrophobic groups, such as aliphatic hydrocarbon and aromatic hydrocarbon, therefore, they have strong hydrophobicity and low wettability. With the decrease of particle sizes of coal fines, its specific surface area increases significantly, and a large amount of air is absorbed on the surface of coal fines, forming an air film. At the same time, particles of coal fines are adsorbed and aggregated with each other, and many micro pores are formed inside, resulting in that coal fines with small particle size is easy to aggregate and float on the suspension surface.

Progressive Gas Extraction Technology In Broken Soft Coal Seam Of Qinglong Coal Mine, Guizhou Province, Liang Daofu, Cao Jianming, Dai Mao, Chu Zhiwei, Zhang Lei

Coal Geology & Exploration

Aiming at the problems of uncontrollable trajectory, shallow borehole depth and poor gas extraction effect in gas treatment drilling of broken soft coal seam in Qinglong coal mine, the regional progressive gas extraction technology in broken soft coal seam based on compressed-air directional drilling was proposed, on the basis of analyzing the technical bottleneck of existing gas extraction borehole with rotary drilling. The principle and advantage of the technology was expounded, the technology of directional drilling by compressed-air, the technology of long distance in-seam drilling, and the technology of compound slag discharge by double power were integrated. The field test …

Discussion On The Three-Dimensional Development Model Of The Old Well Pattern In Coalbed Methane Field, Li Jun, Zhang Cong, Zhang Jianguo, Peng He, Cui Xinrui, Zhu Min

Coal Geology & Exploration

In order to increase the degree of production of CBM development blocks, when the production of a single well enters a decline period, the development plan needs to be adjusted, and the production increase and stability can be achieved through the measures such as layer adjustment or layer compensation. In terms of time, it is believed that the main coal seam should be developed first when it is put into production. After the decline period, the secondary main coal seam should be supplemented and combined; in space, combined with the development dynamics, the analytic hierarchy process is used to determine …

Development Characteristics Of Water-Conducting Fractured Zone In Deep Coal Seam Based On Microseismic Monitoring, Hou Enke, Fan Jichao, Xie Xiaoshen, Long Tianwen, Zhang Huanlan, Wang Jianhui, Fan Zhigang

Coal Geology & Exploration

The development height of the water conducting fractured zone is one of the important technical parameters for mine water hazards prediction. In this paper, the combined well-surface microseismic monitoring technology was used to analyze the development characteristics of the water conducting fractured zone in working face 4103 in Wenjiapo coal mine. The results showed that for deep buried coal seams, the microseismic events occured in the advance mining face with advanced influence angle ranging from the minimum of 28° to the maximum of 35°. The stability of overburden decreased due to the faults. Thus, compared with normal bedrock, the overburden …

Microseismic Vector Scanning-Based Natural Fracture Monitoring Of The Coalbed Methane Wells, Liu Zixiong

Coal Geology & Exploration

The development degree of natural fractures is the main factor affecting coalbed methane productivity. In order to accurately obtain the distribution position of the natural fractures in the a coalbed methane field in the southern Qinshui basin, 7 refracturing wells in the area were adopted by surface microseismic vector scanning to monitor the natural fractures. A certain amount of three-component geophones were deployed around the fracturing well to collect microseismic events in the surrounding reservoir during fracturing, and after Semblance superposition, the fracture energy slices at different times in the monitoring area were obtained to explain the natural fractures in …

Sedimentary Response To The Uplift Of The Liupan Shan Since The Late Pleistocene And Its Environmental Effects, Ma Zhaoying, Dong Xiaopeng, Zhang Qing, Cui Jiawei

Coal Geology & Exploration

Liupan Shan lies between the Tibetan plateau and Ordos block and has been under the remote effect of the northeastward extension of the Tibetan plateau. The former research about the uplift of Liupan Shan mainly focused on the petrology, structural deformation or tectonic evolution study from the Cretaceous to early period of Cenozoic. However, the Late Pleistocene geological study closely connected with the human activities was rarely mentioned. In this study, we carried out systematic sedimentary research in the Qingshuihe basin adjacent to the Liupan Shan tectonic belt, re-determine the sedimentary sequence at first, then reverse the uplift history of …

Method And Practice Of Quality Test After Grouting In Coal Mine Goaf, Liu Xiaoping, Li Shan, Liu Xinxing, Cao Xiaoyi, Wang Yutao

Coal Geology & Exploration

Grouting quality test is the key technology for efficient development and utilization of waste land in the goaf of a coal mine, it is of great significance to evaluate the stability of the site and the safety of construction after goaf management. Based on many engineering practices, this paper summarizes the evaluation method of the qualified standards of the grouting quality and the errors existed in the testing work. The results proved that the quality inspection after grouting is a systematic work. The test method could be optimized according to the characteristics of the construction and grouting design requirements, following …

Review Of The Tight Radius Drilling Technology Based On High Pressure Water Jet, Fan Yao, Zhang Qun

Coal Geology & Exploration

Tight radius drilling technology based on high pressure water jet is an important technical means to realize low-cost and efficient development of oil and gas resources. According to the research and application of tight radius drilling technology based on high pressure water jet, the equipment buildup, drilling theory, technical process and application effect of three tight radius drilling technologies and equipments(i.e., forging milling and reaming hydraulic type, forging milling and reaming jet thrust type and casing window type) are summarized systematically, and the advantages, disadvantages and adaptability of different technologies are included. From the point of view of increasing production …