Mining Engineering Commons^™

Luck & Skill: Black Swans & Machiavelli's Ideas On Power, Fortune, Virtu, Thomas W. Camm

Mining Engineering

We hear all the time about the value of hard work and perseverance, and the part they play in the professional life of successful people. What we do not hear so much about are the many professionals who work hard and persevere, yet never seem to quite reach the level of success they aim for. Some current authors are beginning to give more attention to the part luck/black swans/outliers play in success. This is not a new phenomenon, Machiavelli had a lot to say about it back in the Renaissance. So how can knowledge of this dynamic help in a …

Determine The Potential Drill Utilization Improvements And Rock Fragmentation Requirements Using Directional Drilling In A Coal Mining Overburden Highwall Application, K. D. Dill, S. D. Rosenthal

Mining Engineering

This project analyzed the efficiency of incorporating the use of directional drilling technology into coal overburden blasting. Directional drilling is currently in use in the petroleum industry and it is believed that it will be a valuable asset in the mining industry. This project has shown that directional drilling can be a viable technology for use in the coal overburden removal process resulting in increased drill utilization and potential for cost savings. Future work regarding blasting and geotechnical evaluation should be performed to solidify the concept.

Managing Engineering Talent: Unique Challenges To Optimize The Best And Brightest, Thomas W. Camm, J. C. Johnson

Mining Engineering

Most engineers are bright, hard-working, reliable, and prefer to avoid conflict. An engineering curriculum tends to self-select these characteristics. By most standards, you would expect workers exhibiting these traits to require minimal supervision. But is this true? Is this how most current engineering managers lead? Looking at some current theories on leadership combined with personal anecdotes, this presentation will look at some common misconceptions about leading engineers.

All-In Sustaining Cost Analysis: Pros And Cons, Asseu Gilbert Yapo, Thomas W. Camm

Mining Engineering

All-in sustaining cost is a metric used by mining companies to reflect the cost of gold mining in a consistent format useful to both investors and mining professionals. Cost reporting focused on the direct cost of mining and processing ore was summarized in the non-GAAP cash cost developed by the Gold Institute in 1996. In 2013, a group of mining companies, working with the World Gold Council, developed a more inclusive approach to reporting costs designed to solve the dilemma of showing a more comprehensive reflection of recurring costs involved in producing gold, without discouraging investors.

Embrace The Unknown: Stop Saying “It’S Too Hard” And Start Embracing Uncertainty In Your Mine Plans, C. Roos

Mining Engineering

Nearly every input to a mine plan is based on an estimate. The estimates may be from sample data, historical information, models, or personal opinion, but in all cases, these values are simply expected values (means). In real life, we do not get to iterate the exact conditions at our mining operation many times to ensure that that average value is attained. The expected value also tells us nothing about the spread of values that that input might take on. The result is a significant amount of unquantified uncertainty in our mine plans. Unfortunately, it is often too expensive or …

Evaluation & Selection Of Novel Surveying Systems For Use In Surface Coal Mining, M. Drake, C. Roos, P. Conrad, T. Stack

Mining Engineering

This paper presents the evaluation Montana Tech completed for the Western Energy Company Rosebud Mine relating to the benefits of survey data collected using novel technologies over traditional methods for topographic surveys. These technologies include Unmanned Aircraft Systems (UAS), photogrammetry, and laser scanning/LIDAR. Utilizing these technologies, large areas such as reclamation areas and cast blasts can be surveyed in a timely manner for use by the mining operation. The areas that were evaluated were the improvements in the safety of employees and the time required to collect data. In addition, there is also a potential cost savings for the operation, …

Arctic Micromonas Uses Protein Pools And Non-Photochemical Quenching To Cope With Temperature Restrictions On Photosystem Ii Protein Turnover, Guangyan Ni, Gabrielle Zimbalatti, Cole D. Murphy, Audrey B. Barnett, Christopher M. Arsenault, Gang Li, Amanda M. Cockshutt, Douglas A. Campbell

Michigan Tech Publications, Part 1

Micromonas strains of small prasinophyte green algae are found throughout the world’s oceans, exploiting widely different niches. We grew arctic and temperate strains of Micromonas and compared their susceptibilities to photoinactivation of Photosystem II, their counteracting Photosystem II repair capacities, their Photosystem II content, and their induction and relaxation of non-photochemical quenching. In the arctic strain Micromonas NCMA 2099, the cellular content of active Photosystem II represents only about 50 % of total Photosystem II protein, as a slow rate constant for clearance of PsbA protein limits instantaneous repair. In contrast, the temperate strain NCMA 1646 shows a faster clearance …

Assessment Of Potential Impacts To Surface And Subsurface Water Bodies Due To Longwall Mining, Christopher R. Newman, Zacharias Agioutantis, Gabriel Boede Jimenez Leon

Mining Engineering Faculty Publications

Ground movements due to longwall mining operations have the potential to damage the hydrological balance within as well as outside the mine permit area in the form of increased surface ponding and changes to hydrogeological properties. Recently, the Office of Surface Mining, Reclamation and Enforcement (OSMRE) in the USA, has completed a public comment period on a newly proposed rule for the protection of streams and groundwater from adverse impacts of surface and underground mining operations (80 FR 44435). With increased community and regulatory focus on mining operations and their potential to adversely affect streams and groundwater, now there is …

Laboratory Performance Comparison Of Vortecone Inertial Dust Scrubber To Flooded-Bed Dust Scrubber, Adam J. Levy

Theses and Dissertations--Mining Engineering

Increasing incidence of Black Lung disease in miners since the early 1990s has concerned law makers and the mining industry. New regulations promulgated by MSHA in 2014 lowered the permissible limit of dust exposure of underground workers. The hazards of respirable coal dust have been common knowledge throughout the mining industry since the enactment of the 1969 Federal Coal Mine Health and Safety Act, and many administrative controls have been put in place since its enactment.

The purpose of this thesis is to analyze the performance of a Vortecone scrubber, used in the automotive industry to remove paint overspray from …

Synthesis And Characterization Of Carbon Doped Tio2 Photocatalysts Supported On Stainless Steel Mesh By Sol-Gel Method, J. O. Tijani, O. O. Fatoba, T. C. Totito, W. D. Roos, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

This study synthesized pure anatase carbon doped TiO₂ photocatalysts supported on a stainless-steel mesh using a sol-gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide (DMF)/TiCl4. The influence of the pyrolysis temperature and holding time on the morphological characteristics, particle sizes and surface area of the prepared catalyst was investigated. The prepared catalysts were characterized by several analytical methods: high resolution scanning electron microscopy (HRSEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and X-ray photoelectron spectroscopy (XPS). The XRD patterns showed that the supported TiO2 nanocrystals are typically anatase, polycrystalline and body-centered tetragonal in structure. The EDS and XPS results …

Performance Evaluation Of Integrated Co2 Huff-N-Puff And Wag In Low-Pressure Heterogeneous Reservoir, Hutthapong Yoosook

Chulalongkorn University Theses and Dissertations (Chula ETD)

The integrated CO2 Huff-n-Puff and WAG is a novel technique to combine CO2 Huff-n-Puff technique that conducted at early state and followed by WAG technique until the end of operating time. This technique is effectiveness in term of increased oil recovery and reduced CO2 utilization. However, the integrated CO2 Huff-n-Puff and WAG process contains numerous adjustable operating parameters. Hence, numerical simulation study and sensitivity analysis become essential to investigate the effects of main operational parameters and evaluate the performance of the integrated CO2 Huff-n-Puff and WAG process in low-pressure heterogeneous reservoir to achieve the maximum benefits. According to simulation results, …

Estimating The Effects Of Blasting Vibrations On The High-Wall Stability, Abhinav Sharma

Theses and Dissertations--Mining Engineering

The stability of the high-walls is one of the major concerns for open pit mines. Among the various factors affecting the stability of high-walls, blast vibrations can be an important one. In general, worldwide the established respective government regulations and industry standards are used as guidance to determine the maximum recommended levels of the peak particle velocity and frequency from the blast to avoid any effects on the structures around the mining project. However, most of the regulations are meant for buildings or houses and do not concern high-walls.

This thesis investigates the response of high-walls under the effects of …

Assessment Of Potential Impacts To Subsurface Bodies Of Water Due To Underground Coal Mining, Gabriel Bode-Jimenez

Theses and Dissertations--Mining Engineering

Underground coal mining operations induce ground movements, which may impact overlying hydrogeologic systems. Potential impacts mainly include changes in the hydraulic conductivity of overlying strata, decreasing of the hydraulic head and changes in water flow. The present research quantifies potential hydrogeologic impacts caused by underground mining through modeling of pre- and post-mining hydrogeologic systems.

Three-dimensional conceptual hydrogeologic models were constructed with the Processing Modflow for Windows software package (PMWiN). The models are based on an actual case study, but were simplified in terms of geometry and material properties. Water flow was simulated under changing hydrogeologic properties. A number of scenarios …

Surface Chemisty Study Of Monazite Flotation In Coal Refuse Systems, Wencai Zhang

Theses and Dissertations--Mining Engineering

Rare earth mineral recovery from alternative resources such as coal and coal byproducts is increasingly important to provide an opportunity for economic recovery from U.S. sources. Currently, China produces the majority of the 149,000 tons of rare earth elements used annually worldwide of which the U.S. imports 11% or around 16,000 tons. There are no significant mining operations producing rare earth elements in the U.S. However, there are many U.S. sources containing rare earth minerals such as monazite including heavy mineral sand and phosphate operations. Monazite mineral particles of a few microns have also been detected in Fire Clay seam …

Calculation Of The Edge Effect Offset For High Extraction Coal Panels, Joshua Hescock

Theses and Dissertations--Mining Engineering

The Surface Deformation Prediction System (SDPS) program has been developed as an engineering tool for the prediction of subsidence deformation indices through the implementation of an influence function. SDPS provides reliable predictions of mining induced surface displacements, strains, and tilt for varying surface topography. One of the key aspects in obtaining reliable ground deformation prediction is the determination of the edge effect offset. The value assigned to the edge effect corresponds to a virtual offsetting of boundary lines delineating the extracted panel to allow for roof cantilevering over the mined out area.

The objective of this thesis is to describe …

Fundamental Improvement In The Tribocharging Separation Process For Upgrading Coal, Jinxiang Chen

Theses and Dissertations--Mining Engineering

Triboelectrostatic separation is a physical separation technique that is based on surface electronic property differences among minerals to achieve a separation. Minerals have different surface conductivities and electron affinities. They are charged differently in quantity and/or polarity after a tribocharging process. Particles with different surface charges move discretely under external electric field produce a separation. Electrostatic separation is a dry mineral processing method that does not require any water or chemical reagents. It can greatly simplify the processing circuit and reduce operating cost. Additionally, problems caused by water in conventional wet mineral processing such as water freezing, dewatering, water pollution …

Electromagnetic Signal Feedback Control For Proximity Detection Systems, Adam K. Smith

Dissertations, Master's Theses and Master's Reports

Coal is the most abundant fossil fuel in the United States and remains an essential source of energy. While more than half of coal production comes from surface mining, nearly twice as many workers are employed by underground operations.

One of the key pieces of equipment used in underground coal mining is the continuous mining machine. These large and powerful machines are operated in confined spaces by remote control. Since 1984, 40 mine workers in the U. S. have been killed when struck or pinned by a continuous mining machine. It is estimated that a majority of these accidents could …

Designing Efficient Petroleum Fiscal System For Mozambique, Nelson Victor

Chulalongkorn University Theses and Dissertations (Chula ETD)

Nowadays, tax regime is designed to attract investment and provide the contractor with fair return on investment, at the same time, provide the host government with adequate resources for rent, thereby resulting in win-win situation. This study analyses the existing petroleum fiscal regime in the Republic of Mozambique and proposes a more efficient and flexible regime. The analysis shows that the government take currently remains at around 39% while the contactors' net present value (NPV) increases as field sizes and oil prices increase. The current system is considered a regressive system which is inefficient in distributing wealth from oil profit. …

Controlling Properties Of Agglomerates For Chemical Processes, Joseph A. Halt

Dissertations, Master's Theses and Master's Reports

Iron ore pellets are hard spheres made from powdered ore and binders. Pellets are used to make iron, mainly in blast furnaces. Around the time that the pelletizing process was developed, starch was proposed as a binder because it’s viscous, adheres well to iron oxides, does not contaminate pellets and is relatively cheap. In practice, however, starch leads to weak pellets with rough surfaces – these increase the amount of dust generated within process equipment and during pellet shipping and handling. Thus, even though the usual binder (bentonite clay) contaminates pellets, pelletizers prefer it to starch or other organics.

This …

Fiber Bragg Grating Sensors For Mainstream Industrial Processes, Gary Allwood, Graham Wild, Steven Hinkley

Research outputs 2014 to 2021

This paper reviews fiber Bragg grating sensing technology with respect to its use in mainstream industrial process applications. A review of the various types of sensors that have been developed for industries such as power generation, water treatment and services, mining, and the oil and gas sector has been performed. A market overview is reported as well as a discussion of some of the factors limiting their penetration into these markets. Furthermore, the author’s make recommendations for future work that would potentially provide significant opportunity for the advancement of fiber Bragg grating sensor networks in these mainstream industries.

Coal Combustion Products Utilization For Soil Amendment, Tran Thi Anh Tuyet

Chulalongkorn University Theses and Dissertations (Chula ETD)

Nowadays, coal has a crucial role in generating energy all over the world. As a result, the consumption of coal creates a huge amount of coal combustion products, including bottom ash and fly ash. The coal ash has the potential characteristics to become a resource material in agriculture such as its texture, water holding capacity, bulk density, pH etc., and contains almost all the essential plant nutrients. However, most of the coal ash created is dumped into the landfill, which is a contributing factor in the environmental degradation. This study wants to use coal ash in agriculture as a way …

Time Series Pattern Discovery Techniques For Well-To-Well Log Correlation, Chanchai Apiwatsakulchai

Chulalongkorn University Theses and Dissertations (Chula ETD)

Well log data is one of the most abundant data sources for subsurface characterization since almost all drilled wells are logged. Subsurface characterization requires correlated well log information. Processes to help perform well-to-well log correlation have been developed in this study based on the two approaches: pattern matching and pattern discovery. Pattern matching focuses on finding a known pattern of interest in uncorrelated wells. The use of Euclidean, Hamming, and Levenshtein distances in similarity measurement, Piecewise Aggregate Approximation (PAA), and Symbolic Aggregate approXimation (SAX) data representation helps create reduced-resolution while maintains the main characteristics of the signals. Multi-resolution analysis provides …

Thermomechanical Fatigue Life Investigation Of An Ultra-Large Mining Dump Truck Tire, Wedam Nyaaba

Doctoral Dissertations

The cost benefits associated with the use of heavy mining machinery in the surface mining industry has led to a surge in the production of ultra-large radial tires with rim diameters in excess of 35 in. These tires experience fatigue failures in operation. The use of reinforcing fillers and processing aids in tire compounds results in the formation of microstructural inhomogeneity in the compounds and may serve as sources of crack initiation in the tire. Abrasive material cutting is another source of cracks in tires used in mining applications. It suffices, then, to assume that every material plane in the …

Modeling Dynamic Community Acceptance Of Mining Using Agent-Based Modeling, Mark Kofi Boateng

Doctoral Dissertations

"This research attempts to provide fundamental understanding into the relationship between perceived sustainability of mineral projects and community acceptance. The main objective is to apply agent-based modeling (ABM) and discrete choice modeling to understand changes in community acceptance over time due to changes in community demographics and perceptions. This objective focuses on: 1) formulating agent utility functions for ABM, based on discrete choice theory; 2) applying ABM to account for the effect of information diffusion on community acceptance; and 3) explaining the relationship between initial conditions, topology, and rate of interactions, on one hand, and community acceptance on the other …

Pillar Design For St. Peter Sandstone Formation, Francis Anohomah Arthur

Doctoral Dissertations

"Silica sands produced primarily from St. Peter Sandstone are used for hydraulic fracturing in the petroleum industry, glassmaking, chemicals, ceramics, filtration and the foundry industry in the US. The recent high demand for silica sands for hydraulic fracturing has triggered increased production and commissioning of new silica sand mines to support natural gas production from shale and tight gas deposits in the US. Most mines use surface mining methods to extract St. Peter Sandstone. The room and pillar mining method has been successfully used for St. Peter Sandstone mining in a few US locations, however, no one has proposed a …

Characterization And Numerical Simulation Of The Microstructural And Micromechanical Viscoelastic Behavior Of Oil Sands Using The Discrete Element Method, Eric Kofi Gbadam

Doctoral Dissertations

"Oil sands are naturally geologic formations of predominantly quartz sand grains whose void spaces are filled with bitumen, water, and dissolved gases. The electric rope shovel is the primary equipment used for excavating the Athabasca oil sand formations. The equipment's static and dynamic loads are transferred to the formation during excavation and propel. These loads cause ground instability leading to sinkage or rutting, crawler wear, and fracture failures. These problems result in unplanned downtimes, production losses, and high maintenance costs. In order to address these problems, there is a need to develop valid models that capture the behavior and performance …

Real-Time Diesel Particulate Matter Monitoring In Underground Mine Atmospheres, Association With The Standard Method And Related Challenges, Muhammad Usman Khan

Doctoral Dissertations

"Diesel-powered equipment is a significant component of underground mining operations. Miners' exposure to diesel exhaust is harmful. The standard Diesel Particulate Matter (DPM) monitoring method (NIOSH 5040 method) has limitations that preclude rapid DPM estimation and detailed understanding of DPM variations over time. However, real-time DPM monitors do not inherit these limitations. Biodiesel is often used as a substitute for regular petroleum-diesel because of its ability to emit less DPM. However, accuracy of available real-time DPM monitors has not been determined in mines using 70% to 99% (high-percent) biodiesel. The present research addresses this need by rigorous testing of a …

Lhd Vibrations Analysis And Numerical Modeling During Operations, Kgosietsile Kolobe

Doctoral Dissertations

"Load-haul-dump vehicles (LHDs) are extensively used as primary loaders in mining operations. LHDs have proven to be vigorous, extremely productive and reliable in mining applications. They have a wide range of tramming capacities that have enabled them to become an essential component in the hard rock mining industry.

Increased mining economic challenges and global competition means the mining industry has to maximize productivity by cutting down operating and capital costs. Also, improvements in safety standards have led to the demand for safer and efficient machines.

LHD operators are at a high risk of whole-body vibrations (WBVs) exposure leading to musculoskeletal …

The Influence Of Caprock On Blast Fragmentation Distribution, Matthew Kurtis Coy

Doctoral Dissertations

"This dissertation describes the development of a small-scale model of a caprock-laden quarry blast and discusses the results from that testing. The purpose of this testing was to provide insight into the reasons for poor caprock breakage during blasting.

Small-scale test blocks were poured using a weak mortar mix to represent a limestone formation at a small scale. A cold joint was created in the upper portion of the test specimens to represent the bedding plane that separates caprock and substrate layers in a caprock-laden limestone bench. The scale-model test blocks were blasted using detonating cord. The primary configuration for …

Recovery Of Phosphate Minerals From Plant Tailings Using Direct Froth Flotation Process, Ashraf Alsafasfeh

Masters Theses

"The wastes produced from phosphate industry presents many challenges due to the economic and environmental impacts of their disposal. In the meantime, scarcity of high-grade phosphate ores persuades researchers to find novel methods of upgrading these wastes (secondary sources) and recycling them in the production plant circuit. The goal of this study is to investigate the potential to upgrade the phosphorus content in the tailing produced from a phosphorous production plant using direct froth flotation process. Characterization studies such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and mineral liberation analysis (MLA) were first conducted to identify the mineralogical and …