Mining Engineering Commons^™

Blast Plug And Stemming Construction For Blast Holes, Paul Nicholas Worsey

Mining Engineering Faculty Research & Creative Works

A plug for use in stemming a blast hole having an explosive charge therein. The plug comprises a wedge member and a stabilizing structure on the wedge member. The wedge member tapers in an outward direction from a relatively wide base to a relatively narrow end and has a central axis extending endwise with respect to the wedge member. The stabilizing structure extends generally axially with respect to the wedge member from adjacent the base of the wedge member. The plug is to be positioned in the blast hole with the base of the wedge member facing inwardly toward the …

Dual Purpose Fuze, Paul Nicholas Worsey

Mining Engineering Faculty Research & Creative Works

A dual purpose fuze for a projectile which can activate a quantity of material selected from a group including high explosive, low explosive, propellant and pyrotechnic compounds. The fuze includes a charge holder having a socket therein facing the quantity of material to be activated. A fuze charge located in the socket has a depression in it so formed as to cause the fuze charge to explode in a jet directed outwardly from the socket of sufficiently high energy to activate a high explosive in a high explosive projectile, the fuze charge being sufficiently small to prevent rupture of containment …

High Pressure Lubricooling Machining Of Metals, Marian Mazurkiewicz

Mining Engineering Faculty Research & Creative Works

A method of machining metals, by effecting relative movement between a work piece and a tool having a cutting edge to cut the work piece and produce a chip, including injecting a high pressure jet of cooling liquid into the cutting zone during machining, the jet being at a pressure of at least about 5,000 p.s.i. The jet is preferably injected between the chip and the rake face of the cutting tool, and the trajectory of the jet is offset from the rake face of the cutting tool by a small amount and the jet is aimed at the cutting …

A Nuclear Fragmentation Energy Deposition Model, John W. Wilson, D. M. Ngo, T. N. Forgarty, W. W. Buck

Mining Engineering Faculty Research & Creative Works

A formalism for target fragment transport is presented with application to energy loss spectra in thin silicon devices. A nuclear database is recommended that agrees well with the measurements of P.J. McNulty et al. (1980) using surface barrier detectors. High-energy events observed by P.J. McNulty et al. (1981), which are not predicted by intranuclear cascade models, are well represented by this work

Disintegration Of Wood, Marian Mazurkiewicz

Mining Engineering Faculty Research & Creative Works

Disintegration of a body of organic material involving subjecting the body to liquid jet action with the energy of the liquid as it impacts on the body such as to effect disintegration of the body into particles.

Characteristic Surfaces For Three-Position Function Generation With Planar Four-Bar Mechanisms, Clark R. Barker, P. L. Tso

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position function-generation problem and the solution space for planar four-bar mechanisms. The two infinities of solutions possible are mapped in a plane to determine the locations where particular types of mechanisms occur. It is possible to generate a contour in the mapping plane which joins together all solutions which possess a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space to ascertain the overall characteristics of potential solutions to the design problem. A numerical example is used for illustrative purposes, but the results can …

Mechanical Stemming Construction For Blast Holes And Method Of Use, Paul Nicholas Worsey

Mining Engineering Faculty Research & Creative Works

A stemming construction for a blast hole loaded with an explosive charge, comprising a tapering wedge member dispersed in the blast hole outwardly of the explosive charge with its narrower end facing outwardly toward the mouth of the blast hole, and particulate stemming material in the blast hole outwardly of the wedge member. Detonation of the explosive drives the wedge member into the stemming material to wedge the stemming material against the walls of the blast hole. The wedge member is preferably cone-shaped and can be provided with a stabilizing rod to prevent it from tilting.

Operations-Based Training Strategy For Longwall Mining, R. Larry Grayson, Michael J. Klishis, Ronald C. Althouse, George M. Lies

Mining Engineering Faculty Research & Creative Works

A system that can be used to pinpoint the specific training needs of operations and assist in the design and upgrading of focused training approaches can benefit longwall mining. It can be directed at systematically correcting performance discrepancies at an individual, crew, or mine level, and also to challenge workers and management toward attaining improved performances. Such an approach involves a combination of features, such as diligence in monitoring and evaluating performances, thorough coordination in implementing changes, and effective use of operational data.

The Bureau of Mines, through contract with the Mining Extension Service of West Virginia University, has developed …

Three-Position Function Generation Of Planar Four-Bar Mechanisms With Equal Deviation Transmission Angle Control, Clark R. Barker, Gwo Huey Shu

Mining Engineering Faculty Research & Creative Works

In an earlier work, it has been shown that all of the potential solutions to a given problem may be represented in an αβ-plane which can be subdivided into mechanism types. Further, the regions in the αβ-plane may represent two possible forms of assembly plus a change of form class which are not valid solutions. In this paper, we provide a third-order polynomial which defines the locus in the αbeta-plane of solutions which have equal deviation of their transmission angle from the ideal of 90° throughout the entire range of motion. When these solutions are mapped into a Cartesian plane, …

Three-Position Function Generation Of Planar Four-Bar Mechanisms With Equal Deviation Transmission Angle Control, Clark R. Barker, Gwo Huey Shu

Mining Engineering Faculty Research & Creative Works

This paper is an extension of earlier work on mapping of three-position function generation of planar four-bar mechanisms. Previously, it has been shown that all of the potential solutions to a given problem may be represented in an aft plane which can be subdivided into mechanism types. Further, the regions in the aft plane may represent two possible forms of assembly plus a change of form class which are not valid solutions. In this paper, we provide a third-order polynomial which defines the locus in the aft-plane of solutions which have equal deviation of their transmission angle from the ideal …

Disintegration Of Wood, Marian Mazurkiewicz

Mining Engineering Faculty Research & Creative Works

Disintegration of wood especially for production of wood pulp for making paper, involving subjecting a body of wood, more particularly a debarked log, to liquid jet action with the energy of the liquid as it impacts on the body such as to effect disintegration of the body into particles.

Knowledge Organization And Inference Engine For The Wvu Face Decision Support System, S. Carrow, R. S. Nutter Jr., R. S. Raman, N. A. Reddy, Y. V. Reddy, R. Larry Grayson

Mining Engineering Faculty Research & Creative Works

The knowledge-based organization for the West Virginia University Face Decision Support System is given, along with the initial development of the associated inference engine. The knowledge base contains generic knowledge about underground coal mines that utilize continuous miners. A typical knowledge entry is given, and the inference engine methodology is explained. The engine utilizes this knowledge with data from monitoring systems and from interaction with the section foreman, to assist in making section management decisions and plans.

Characteristic Surfaces For Three-Position Motion Generation With Planar Four-Bar Mechanisms, Clark R. Barker, J. Baumann

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position motion generation problem and the solution space for planar four-bar mechanisms. After one half of the basic four bar had been selected, two infinities of solutions still remained. These solutions are mapped in a plane to determine where the particular types of mechanisms occur. A contour is then generated in the mapping plane which joins together all solutions which share a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space and in the Cartesian plane in which the motion generation is defined. Significant …

Characteristic Surfaces For Three-Position Motion Generation With Planar Four-Bar Mechanisms., Clark R. Barker, J. Baumann

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position motion generation problem and the solution space for planar four-bar mechanisms. After one half of the basic four bar had been selected, two infinities of solutions still remained. These solutions are mapped in a plane to determine where the particular types of mechanisms occur. A contour is then generated in the mapping plane which joins together all solutions which share a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space and in the Cartesian plane in which the motion generation is defined.

Integrated Detonator Delay Circuits And Firing Console, Lawson J. Tyler, Paul Nicholas Worsey

Mining Engineering Faculty Research & Creative Works

A detonation system for use with supply of electrical energy has user operable firing console for selectably transmitting unit identification information, firing delay time information and selections from a command set including Output, Delay, Fire (Time), Abort, Power Up (Arm), Input, and Store. The console displays responses or information digested from responses by electrical delay detonators to the commands. The detonators have explosive, a capacitor for storing energy from the supply to set off the explosive, circuitry for charging the capacitor from the supply and transferring the energy from the capacitor to the explosive in response to first and second …

Characteristic Surfaces For Three Position Function Generation With Planar Four Bar Mechanisms, Clark R. Barker, P. L. Tso

Mining Engineering Faculty Research & Creative Works

This paper considers the relationship between the three-position function generation problem and the solution space for planar four bar mechanisms. The two infinities of solutions possible are mapped in a plane to determine the locations where particular types of mechanisms occur. It is possible to generate a contour in the mapping plane which joins together all solutions which possess a common characteristic in regard to their link lengths. This same contour can be displayed in the solution space to ascertain the overall characteristics of potential solutions to the design problem. A numerical example is used for illustrative purposes, but the …

Experimental Investigation Of The Effect Of Geological Discontinuity Conditions Of Rock Splitting By Blasting, Shijie Qu

Masters Theses

"A series of modal scale, two borehole splitting test blasts was geometrically designed both with concrete and with Plexiglas. The discontinuities were all symetrically located midway between split holes and were oriented perpendicular to the desired split plane. Sand and clay filled discontinuities of 1/16, 1/8 and 1/4 inch width, and closed discontinuities were used. Both discontinuity frequency and width generally reduced the maximum successful split-hole spacing. The regularity and integrity of the split profile became poorer as the discontinuities were closer to the boreholes and the discontinuity width became greater, due to the cratering effect which occurred from the …

A Study On Fragmentation And Ground Vibration With Air Space In The Blasthole, Everett Ellsworth Bleakney Iii

Masters Theses

"The degree of fragmentation and the level of ground vibration from a bench blast employing standard full-column completely-coupled explosive charges are commonly controlled by varying one or more of the many dimensional variables of blast design. Blasting techniques such as decoupling and air-gapping, utilizing air space in the blasthole, have also been reported as having the potential to control rock fragmentation and ground vibration.

This investigation, using reduced-scale in situ bench blasts, examined the degree of fragmentation and the level of ground vibrations produced from the standard full-column completely-coupled, air-gapped, and decoupled methods of blasting to:

1. Compare the effectiveness …

Equivalent Electron Fluence For Space Qualification Of Shallow Junction Heteroface Gaas Solar Cells, John W. Wilson, L. V. Stock

Mining Engineering Faculty Research & Creative Works

It is desirable to perform qualification tests prior to deployment of solar cells in space power applications. Such test procedures are complicated by the complex mixture of differing radiation components in space which are difficult to simulate in ground test facilities. Although it has been shown that an equivalent electron fluence ratio cannot be uniquely defined for monoenergetic proton exposure of GaAs shallow junction cells, an equivalent electron fluence test can be defined for common spectral components of protons found in space. Equivalent electron fluence levels for the geosynchronous environment are presented.

Control Of Rock Fragmentation Through Explosive Coupling, Timothy Wayne Warden

Masters Theses

"Both detonation pressure and borehole pressure, resulting from an explosion within blastholes in rock, perform specific functions in the fragmentation of the rock and the generation of ground vibrations. The results of previous investigations would suggest that control of these pressures in the borehole would, to some extent, control the size distribution of the blasted particles. One method of influencing detonation and borehole pressures is by varying the hole diameter in relation to a constant charge diameter, called decoupling, and by varying the medium between the explosive charge and the rock.

This investigation examined the effects of geometric coupling, which …

Determination Of Washability And Flotation Characteristics Of Important Missouri Coal Seams, Hayri Erten

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Most of the 14 workable coal seams in the State of Missouri are considered to be high in ash and sulfur contents and need beneficiation in order to meet customer and Environmental Protection Agency requirements. If proper beneficiation methods can be designed, more Missouri coal will be mined and used within the state.

The objectives of this research are (1) to draw the washability curves of important Missouri coal seams in order to determine their washability characteristics, and (2) to determine the flotation characteristics of the same seams.

Tests conducted on 20 samples taken from Bevier, Croweburg, Mulky, and Summit …

Umr Minerals Building: An Innovative Approach To The Construction Of Underground Buildings, Bruce H. Green, David A. Summers

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The original intent of the exercice was to develop a design for a new minerals engineering building which would demonstrate the applicability and feasibility of an underground building complex to our administration and to the Board of Curators. Two major advantages were foreseen for such a building. Not only would it be immensely superior, in terms of energy demand, to the conventional aboveground buildings previously constructed by the University, but it also would have highly significant symbollic and educational effects on the students of the several disciplines comprising the UMR "School of Mines and Metallurgy". It would also serve as …

7th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Assessment Of Residential Energy Use: Some Results And Methodologies, Gunar E. Liepins

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper addresses the problem of determining residential energy use. Specifically, it discusses some of the estimation methods, selected results, and potential errors in the estimates.

Energy Evaluation And Component Characterization Data In A Residential Solar Monitoring Program, Gene E. Kouba, William P. Moran, Bruce V. Ketcham

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The initial phase of performance analysis, data acquisition system development and short term component characterization of a two year residential solar energy monitoring program are presented. The purpose of the monitoring program is to accumulate both short and long term performance data which would be useful in optimizing system operation, determining possible improvements to the system configuration, validating simulation methods for predicting performance, and estimating the economics of the system.

Industrial Energy Conservation Through Boiler Operation Efficiency Improvement, Dupree Maples, G. D. Whitehouse

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A method of determining the minimum amount of oxygen in the flue gas which results in the most efficient combustion is discussed. Results of field test are presented. The magnitude of the stack gas losses is dependent on the stack gas composition determined by the fuel and quantity of excess air and the stack temperature.

Energy Is Not Just Flipping The Switch Any More, Alfred L. Ransome

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The energy industry -- or basically the mining industry -- is becoming more complex and costly. It is imperative that the facts pertaining to the mineral industry be disseminated to the layman; the best method in the long term is by way of science and economics in the schools -- kindergarten through high school. The Mineral Information Committee of the Colorado Section of the SME-AIME in cooperation with the Metro State College, Denver is embarking on such a program, and the newly developed magazine, "RESOURCES", is the vehicle for spreading the message through the classroom.

Oil Shale Energy And The Environment, Stephen Utter

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Shale oil can be produced from oil shale by true In situ, modified in situ, and surface retorting methods. Both modified in situ and surface methods require mining of the oil shale. The environmental Implications of an oil shale mining industry are reviewed and the impacts upon land use, air and water quality, and ecological systems discussed. The Bureau's mining environmental research program is described and the results to date summarized.

Method And Apparatus For Water Jet Drilling Of Rock, David A. Summers, Marian Mazurkiewicz, Dwight J. Bushnell, James Blaine

Mining Engineering Faculty Research & Creative Works

Rock drilling method and apparatus utilizing high pressure water jets for drilling holes of relatively small diameter at speeds significantly greater than that attainable with existing drilling tools. Greatly increased drilling rates are attained due to jet nozzle geometry and speed of rotation. The jet nozzle design has two orifices, one pointing axially ahead in the direction of travel and the second inclined at an angle of approximately 30° from the axis. The two orifices have diameters in the ratio of approximately 1:2. Liquid jet velocities in excess of 1,000 ft/sec are used, and the nozzle is rotated at speeds …

Thrust-Impact Rock-Splitter, George Bromley Clark, T. F. Lehnhoff

Mining Engineering Faculty Research & Creative Works

A rock splitting tool having elongate laterally expanding metal pressure bars or feathers and an axial sliding wedge or spreader for radially separating the feathers, the wedge being driven by the combined and superimposed forces of a hydraulic thrust servomotor and an impact hammer. The driving paths for transmitting forces to the wedge are coaxial and partially in series and partially in parallel.