Open Access. Powered by Scholars. Published by Universities.®

Mining Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type

Articles 421 - 450 of 1187

Full-Text Articles in Mining Engineering

Using Coupled Eulerian And Lagrangian Grids To Model Explosive Interactions With Buildings, Braden Lusk, William P. Schonberg, Jason Baird, Robert S. Woodley, Warren Noll Nov 2006

Using Coupled Eulerian And Lagrangian Grids To Model Explosive Interactions With Buildings, Braden Lusk, William P. Schonberg, Jason Baird, Robert S. Woodley, Warren Noll

Mining Engineering Faculty Research & Creative Works

This paper presents the development of a computational model that can be used to study the interactions between structures and detonating explosives contained within them. This model was developed as part of an effort to develop a rubble characterization model for use in AmmoSIM, an agent based urban tactical decision aid (UTDA) software for weapon-target pairing. The rubble pile created following the collapse of a building in a combat situation can significantly impact mission accomplishment, particularly in the area of movement and maneuver. The information provided by AmmoSIM will enable both platoon level and command center staff to make informed …

Go to article

New Concept For Constructing An Autonomous Completely Explosive Pulsed Power System: Transverse Shock Wave Ferromagnetic Primary Power Source And Loop Flux Compression Amplifier, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers Nov 2006

New Concept For Constructing An Autonomous Completely Explosive Pulsed Power System: Transverse Shock Wave Ferromagnetic Primary Power Source And Loop Flux Compression Amplifier, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

A new design idea for a compact, autonomous, completely explosive pulsed power system is proposed. The system is based on the shock wave ferromagnetic generator (FMG) as a primary power source and a loop magnetic flux compression generator (LFCG) as a pulsed power amplifier. The FMG primary power source utilizes the effect of transverse shock wave demagnetization of Nd2Fe14B high-energy hard ferromagnets to produce the seed current. Results are presented of an experimental study and digital simulation of operation of the FMG-LFCG system

Go to article

Transformer-Type Seeding System Of A Helical Fcg Based On A Transverse Shock Wave Ferromagnetic Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers Nov 2006

Transformer-Type Seeding System Of A Helical Fcg Based On A Transverse Shock Wave Ferromagnetic Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

A new application of the effect of transverse-shock-wave demagnetization of Nd2Fe14B high-energy hard ferromagnets for powering an explosive-driven helical flux compression generator (FCG) is proposed. The novel FCG seeding system based on a compact transverse shock-wave ferromagnetic generator (FMG) containing a 200-cm3 Nd2Fe14B energy-carrying element and a 12 g high explosive charge was designed, constructed, and tested. The proposed design is based on the idea that the wide coaxial single-turn pulse-generating coil of the FMG can simultaneously serve as a seed coil for the FCG. The coaxial single-turn pulse-generating coil of the FMG was wound on the initial part of …

Go to article

Rubble Pile Characterization Model, William P. Schonberg, Jason Baird, Paul Nicholas Worsey, Abdeldjelil Belarbi, Roger A. Laboube, Braden Lusk, R. Flanagan, H. Burleson, Robert S. Woodley, Warren Noll Jul 2006

Rubble Pile Characterization Model, William P. Schonberg, Jason Baird, Paul Nicholas Worsey, Abdeldjelil Belarbi, Roger A. Laboube, Braden Lusk, R. Flanagan, H. Burleson, Robert S. Woodley, Warren Noll

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Rubble piles created following the collapse of a building in a combat situation can significantly impact mission accomplishment, particularly in the area of movement and maneuver. Rubble characteristics must be known, for example, in order to predict the ability of a vehicle to override the collateral damage from weapon effects in urban areas. Two types of models are developed: a first-order model and a first-principles-based model. In both models, we assume complete rubblization of the building and develop a rubble profile model using the size and composition of the collapsed structure to predict the rubble volume. In both cases, this …

Go to article

Compact Autonomous Explosive-Driven Pulsed Power System Based On A Capacitive Energy Storage Charged By A High-Voltage Shock-Wave Ferromagnetic Generator, S. I. Shkuratov, E. F. Talantsev, Jason Baird, Larry L. Altgilbers, A. H. Stults Jun 2006

Compact Autonomous Explosive-Driven Pulsed Power System Based On A Capacitive Energy Storage Charged By A High-Voltage Shock-Wave Ferromagnetic Generator, S. I. Shkuratov, E. F. Talantsev, Jason Baird, Larry L. Altgilbers, A. H. Stults

Mining Engineering Faculty Research & Creative Works

A new concept for constructing compact autonomous pulsed power systems is presented. This concept utilizes a high-voltage explosive-driven shock-wave ferromagnetic generator (FMG) as a charging source for capacitive energy storage. It has been experimentally demonstrated that miniature FMGs (22-25 cm³ in size and 84-95 g in mass) developed for these experiments can be successfully used to charge capacitor banks. The FMGs, containing Nd₂Fe₁₄B energy-carrying elements, provided pulsed powers of 35-45 kW in times ranging from 10 to 15 µs. A methodology was developed for digital simulation of the operation of the transverse FMG. Experimental results that were obtained are in …

Go to article

Effect Of Water Ice Content On Excavatability Of Lunar Regolith, Leslie S. Gertsch, Robert Gustafson, Richard E. Gertsch Feb 2006

Effect Of Water Ice Content On Excavatability Of Lunar Regolith, Leslie S. Gertsch, Robert Gustafson, Richard E. Gertsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The amount of water ice contained within prepared samples of JSC-1 lunar regolith simulant strongly affects the excavatability of the material. As part of a NASA Phase I SBIR project, load-penetration testing of JSC-1 lunar regolith simulant was performed at water ice concentrations ranging from zero to 11% by mass (approximately saturated), after compaction and cooling to simulate probable lunar conditions. After mixing dry JSC-1 simulant with the appropriate amount of water, the samples were individually compressed into containment rings under 48 MPa of pressure. Thermocouples embedded in the samples monitored internal temperature while they were cooled in a bath …

Go to article

An Analysis And Policy Implications Of Comfort Levels Of Diverse Constituents With Reported Units For Blast Vibrations And Limits: Closing The Communication Gap, Braden Lusk Jan 2006

An Analysis And Policy Implications Of Comfort Levels Of Diverse Constituents With Reported Units For Blast Vibrations And Limits: Closing The Communication Gap, Braden Lusk

Doctoral Dissertations

"Differences exist between public perception of construction blasting and quarry blasting. In general, people are able to tolerate short term inconveniences much better than long term ones. Quarries and other long term mining operations utilizing blasting are coming under increasing public and legislative pressure in the United States. The question being posed for the blasting industry is, "Has our past haste in adopting complex scientific scales and units been detrimental to us?" In other words, are the most palatable things being reported? The goal of this dissertation is to determine whether current units create an atmosphere of discomfort among neighbors …

Go to article

Transverse Explosive Shock-Wave Compression Of Nd₂Fe₁₄B High-Energy Hard Ferromagnets: Induced Magnetic Phase Transition, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Larry L. Altgilbers, Allen H. Stults Jan 2006

Transverse Explosive Shock-Wave Compression Of Nd₂Fe₁₄B High-Energy Hard Ferromagnets: Induced Magnetic Phase Transition, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Larry L. Altgilbers, Allen H. Stults

Mining Engineering Faculty Research & Creative Works

Investigations of the magnetic phase state of Nd2Fe14B high-energy hard ferromagnets under the action of an explosive shock wave traveling across the magnetization vector, M, have been performed. We demonstrate that the transverse shock-wave compression of an Nd2Fe14B hard ferromagnet with pressure at the shock wave front of P = 22.3 GPa causes a hard ferromagnet — to — weak magnet phase transition. Due to this phase transition, the magnetostatic energy stored for an indefinite period of time in the Nd2Fe14B ferromagnet is released within a short time interval and can be transformed into pulsed primary power. Based on this …

Go to article

Longitudinal Shock Wave Depolarization Of Pb(Zr₅₂Ti₄₈)O₃ Polycrystalline Ferroelectrics And Their Utilization In Explosive Pulsed Power, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Henryk Temkin, Larry L. Altgilbers, Allen H. Stults Jan 2006

Longitudinal Shock Wave Depolarization Of Pb(Zr₅₂Ti₄₈)O₃ Polycrystalline Ferroelectrics And Their Utilization In Explosive Pulsed Power, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Henryk Temkin, Larry L. Altgilbers, Allen H. Stults

Mining Engineering Faculty Research & Creative Works

A poled lead zirconate titanate Pb(Zr52Ti48)O3 (PZT) polycrystalline piezoelectric ceramic energy-carrying element of a compact explosive-driven power generator was subjected to a longitudinal explosive shock wave (the wave front traveled along the polarization vector P0). The shock compression of the element at pressures of 1.5-3.8 GPa caused almost complete depolarization of the sample. Shock wave velocity in the PZT was determined to be 3.94 ± 0.27 km/s. The electric charge stored in a ferroelectric, due to its remnant polarization, is released during a short time interval and can be transformed into pulsed power. Compact explosive-driven power sources utilizing longitudinal shock …

Go to article

Completely Explosive Autonomous High-Voltage Pulsed-Power System Based On Shockwave Ferromagnetic Primary Power Source And Spiral Vector Inversion Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Millard F. Rose, Zachary Shotts, Z. Roberts, Allen H. Stults, Larry L. Altgilbers Jan 2006

Completely Explosive Autonomous High-Voltage Pulsed-Power System Based On Shockwave Ferromagnetic Primary Power Source And Spiral Vector Inversion Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Millard F. Rose, Zachary Shotts, Z. Roberts, Allen H. Stults, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

Novel explosive and conventional pulsed-power technologies were combined, and a series of explosive-driven high-voltage power supplies was designed, built, and tested. The power supply contained an explosive-driven high-voltage primary power source based on the fundamental physical effect of shockwave demagnetization of Nd2 Fe14B high-energy ferromagnet and a power-conditioning stage. The volume of the energy-carrying ferromagnetic elements in the shockwave ferromagnetic generators (FMGs) was 8.75 cm3. The power-conditioning stage was based on the spiral vector inversion generator (VIG). The combined FMG-VIG system demonstrated successful operation and good performance. The output-voltage pulse amplitude of the combined FMG-VIG …

Go to article

Pulse Charging Of Capacitor Bank By Explosive-Driven Shock Wave Ferroelectric Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers Jan 2006

Pulse Charging Of Capacitor Bank By Explosive-Driven Shock Wave Ferroelectric Generator, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

Ultracompact explosive-driven shock wave ferroelectric generators (FEGs) were used as autonomous primary power sources for charging capacitor banks of different capacitance. The FEGs utilized longitudinal (when the shock wave propagates along the polarization vector P) shock wave depolarization of Pb(Zr52Ti48)O3 (PZT) polycrystalline ferroelectric ceramic. PZT disks having diameters ranging from 25 to 27 mm and three different thicknesses: 0.65, 2.1, and 5.1 mm. It was experimentally shown that during the charging process the FEGs were capable of producing pulsed power with peak amplitudes up to 0.3 MW. Results for charging voltage, electric charge transfer and …

Go to article

Completely Explosive Ultracompact High-Voltage Nanosecond Pulse-Generating System, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Millard F. Rose, Zachary Shotts, Larry L. Altgilbers, Allen H. Stults Jan 2006

Completely Explosive Ultracompact High-Voltage Nanosecond Pulse-Generating System, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Millard F. Rose, Zachary Shotts, Larry L. Altgilbers, Allen H. Stults

Mining Engineering Faculty Research & Creative Works

A conventional pulsed power technology has been combined with an explosive pulsed power technology to produce an autonomous high-voltage power supply. The power supply contained an explosive-driven high-voltage primary power source and a power-conditioning stage. The ultracompact explosive-driven primary power source was based on the physical effect of shock-wave depolarization of high-energy Pb(Zr52Ti48)O3 ferroelectric material. The volume of the energy-carrying ferroelectric elements in the shock-wave ferroelectric generators (SWFEGs) varied from 1.2 to 2.6 cm3. The power-conditioning stage was based on the spiral vector inversion generator (VIG). The SWFEG-VIG system demonstrated successful operation and good performance. The amplitude of the output …

Go to article

Electrostatic Active Radiation Shielding -- Revisited, John W. Wilson, R. K. Tripathi, R. C. Youngquist Jan 2006

Electrostatic Active Radiation Shielding -- Revisited, John W. Wilson, R. K. Tripathi, R. C. Youngquist

Mining Engineering Faculty Research & Creative Works

For the success of NASA's new vision for space exploration to Moon, Mars and beyond, exposures from the hazards of severe space radiation in deep space long duration missions is ''a must solve'' problem The payload penalty demands a very stringent requirement on the design of the spacecrafts for human deep space missions. Langley has developed state-of-the-art radiation protection and shielding technology for space missions. The exploration beyond low Earth orbit (LEO) to enable routine access to space require protection from the hazards of the accumulated exposures of space radiation, galactic cosmic rays (GCR) and solar particle events (SPE), and …

Go to article

Mapping Ground Conditions Before The Development Of An Underground Hard Rock Mine - Mcarthur River Uranium Mine Case Study, Derek Apel, P. Szmigiel Jan 2006

Mapping Ground Conditions Before The Development Of An Underground Hard Rock Mine - Mcarthur River Uranium Mine Case Study, Derek Apel, P. Szmigiel

Mining Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

System For Heating Bulk Materials, Nassib Aouad, J. Kennedy Jan 2006

System For Heating Bulk Materials, Nassib Aouad, J. Kennedy

Mining Engineering Faculty Research & Creative Works

A system for heating bulk material to remove moisture. The system includes a heat exchanger system in the floor of a bin for receiving moist bulk material. The heat exchanger system is capable of withstanding the weight of the bulk material as well as being stable for the dynamic process of loading and discharging the bulk material. The heat exchanger includes a plurality of spaced beams mounted between a top plate and bottom plate. The spaced beams form conduits for receiving water or other fluids that have been heated by a stove capable of burning wood, coal, biomass material or …

Go to article

Evaluation Of High Frequency Ground Penetrating Radar (Gpr) In Mapping Strata Of Dolomite And Limestone Rocks For Ripping Technique, Derek Apel, V. Dezelic Dec 2005

Evaluation Of High Frequency Ground Penetrating Radar (Gpr) In Mapping Strata Of Dolomite And Limestone Rocks For Ripping Technique, Derek Apel, V. Dezelic

Mining Engineering Faculty Research & Creative Works

This paper presents how high frequency Ground Penetrating Radar (GPR) can be effectively used for mapping the subsurface characterization of dolomite and limestone strata for determination if the rock is suitable for ripping. the results of the experiments conducted in the course of this project illustrated that water saturation helps in increasing the contrast between the dielectric constants of the separations, due to water escaping into cracks and clay layers. Running the survey on a dry rock will give a larger penetration depth; but during the interpretation of the results, one can omit small voids or clay layers. © 2005 …

Go to article

Compact Autonomous Completely Explosive Pulsed Power System Based On Transverse Shock Wave Demagnetization Of Nd₂Fe₁₄B And Magnetic Flux Compression, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers Nov 2005

Compact Autonomous Completely Explosive Pulsed Power System Based On Transverse Shock Wave Demagnetization Of Nd₂Fe₁₄B And Magnetic Flux Compression, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Allen H. Stults, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

The design and performance of a compact autonomous completely explosive pulsed power system based on two physical effects, the transverse shock wave demagnetization of Nd2Fe14B high-energy hard ferromagnets and magnetic flux compression, are presented. A transverse shock wave ferromagnetic generator (FMG) served as a seed source, and a compact helical magnetic flux compression generator (FCG) was used as a pulsed power amplifier. Results of a theoretical and experimental study demonstrated reliable operation of the proposed FMG-FCG system. The methodology for analytical calculation of seed current amplitude is developed.

Go to article

Pulsed Charging Of Capacitor Bank By Compact Explosive-Driven High-Voltage Primary Power Source Based On Longitudinal Shock Wave Depolarization Of Ferroelectric Ceramics, Sergey I. Shkuratov, Jason Baird, Evgueni F. Talantsev, Yaroslav Tkach, Larry L. Altgilbers, Allen H. Stults, Stanislav V. Kolossenok Jan 2005

Pulsed Charging Of Capacitor Bank By Compact Explosive-Driven High-Voltage Primary Power Source Based On Longitudinal Shock Wave Depolarization Of Ferroelectric Ceramics, Sergey I. Shkuratov, Jason Baird, Evgueni F. Talantsev, Yaroslav Tkach, Larry L. Altgilbers, Allen H. Stults, Stanislav V. Kolossenok

Mining Engineering Faculty Research & Creative Works

Results of the investigation of the operation of autonomous ultracompact explosive-driven high-voltage primary power sources based on longitudinal (when the shock wave propagates along the polarization vector P0) shock wave depolarization of ferroelectric materials in the open circuit and charging modes are presented. The energy-carrying elements of shock wave ferroelectric generators (FEGs) were poled lead zirconate titanate (PZT) Pb(Zr52Ti48)O3 polycrystalline piezoelectric ceramic disks with volume 0.35 cm3. The PZT modules were shock compressed in the stress range from 1.5 to 3.8 GPa by a longitudinal shock wave generated by high explosives. In the charging mode, the FEGs provided pulsed power …

Go to article

Performance Of A Bgo Pet/Ct With Higher Resolution Pet Detectors, John W. Wilson, Timothy G. Turkington, J. J. Williams, James G. Colsher, D. L. Mcdaniel, C. L. Kim, Steven G. Ross, C. W. Stearns, S. D. Wollenweber Jan 2005

Performance Of A Bgo Pet/Ct With Higher Resolution Pet Detectors, John W. Wilson, Timothy G. Turkington, J. J. Williams, James G. Colsher, D. L. Mcdaniel, C. L. Kim, Steven G. Ross, C. W. Stearns, S. D. Wollenweber

Mining Engineering Faculty Research & Creative Works

A new PET detector block has been designed to replace the standard detector of the Discovery ST PET/CT system. The new detector block is the same size as the original, but consists of an 8/spl times/6 (tangential× axial) matrix of crystals rather than the original 6/spl times/6. The new crystal dimensions are 4.7× 6.3× 30 mm/sup 3/ (tangential× axial× radial). Full PET/CT systems have been built with these detectors (Discovery STE). Most other aspects of the system are identical to the standard Discovery ST, with differences including the low energy threshold for 3D imaging (now 425 keV) and front-end electronics. …

Go to article

Depolarization Of A Pb(Zr₅₂Ti₄₈)O₃ Polycrystalline Piezoelectric Energy-Carrying Element Of Compact Pulsed Power Generator By A Longitudinal Shock Wave, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Henryk Temkin, Yaroslav Tkach, Larry L. Altgilbers, Allen H. Stults Jan 2005

Depolarization Of A Pb(Zr₅₂Ti₄₈)O₃ Polycrystalline Piezoelectric Energy-Carrying Element Of Compact Pulsed Power Generator By A Longitudinal Shock Wave, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Henryk Temkin, Yaroslav Tkach, Larry L. Altgilbers, Allen H. Stults

Mining Engineering Faculty Research & Creative Works

A poled lead zirconate titanate Pb(Zr52Ti48)O3 polycrystalline piezoelectric ceramic energy-carrying element of a compact explosive-driven pulsed power generator was depolarized by an explosive shock wave traveling along the polarization vector P0. We show that shock wave compression of a ferroelectric energy-carrying element at pressures of 1.5-3.8 GPa caused almost complete depolarization of the sample. The shock wave velocity in the Pb(Zr52Ti48)O3 was determined to be 3.94 ± 0.27 km/s. The electric charge stored in the ferroelectrics, due to their remnant polarization, is released during a short time interval, and can be transformed into pulsed power. Compact explosive-driven sources of primary …

Go to article

Image Quality Vs. Nec In 2d And 3d Pet, John W. Wilson, Timothy G. Turkington, Josh M. Wilson, James G. Colsher, Steven G. Ross Jan 2005

Image Quality Vs. Nec In 2d And 3d Pet, John W. Wilson, Timothy G. Turkington, Josh M. Wilson, James G. Colsher, Steven G. Ross

Mining Engineering Faculty Research & Creative Works

To investigate the relationship between NEC and image quality to 2D and 3D PET, while simultaneously optimizing 3D low energy threshold (LET), we have performed a series of phantom measurements. The phantom consisted of 46 1 cm fillable hollow spheres on a random grid inside a water-filled oval cylinder, 21 cm tall, 36 cm wide, and 40 cm long. The phantom was imaged on a Discovery ST PET/CT system (GE Healthcare, Milwaukee, WI) in a series of 3 min scans as it decayed from an activity of 7.2 mCi. The scans included LET settings of 375,400, and 425 keV in …

Go to article

Investigating The Optimum Lower Energy Threshold Of A New Research Pet/Ct Scanner, Osama Mawlawi, John W. Wilson, Tinsu Pan, Timothy G. Turkington Jan 2005

Investigating The Optimum Lower Energy Threshold Of A New Research Pet/Ct Scanner, Osama Mawlawi, John W. Wilson, Tinsu Pan, Timothy G. Turkington

Mining Engineering Faculty Research & Creative Works

An investigation of the optimum 3D lower energy threshold (LET) setting of the Discovery-RX, a new LYSO based GE research PET/CT scanner is conducted. Sensitivity and noise equivalent count rate (NECR) performance of the scanner in 3D mode were evaluated at multiple LET settings: 400, 425, 450, 460, 470 and 480 KeV. The performance evaluations were conducted according to the NEMA NU2-2001 standard. In addition, the NECR was also evaluated for the same LET settings using the Data Spectrum whole body phantom in order to more accurately simulate a true clinical setting. For the sensitivity measurements, the line source was …

Go to article

Operation Of High-Voltage Transverse Shock Wave Ferromagnetic Generator In The Open Circuit And Charging Modes, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Larry L. Altgilbers, Allen H. Stults, Stanislav V. Kolossenok Jan 2005

Operation Of High-Voltage Transverse Shock Wave Ferromagnetic Generator In The Open Circuit And Charging Modes, Sergey I. Shkuratov, Evgueni F. Talantsev, Jason Baird, Larry L. Altgilbers, Allen H. Stults, Stanislav V. Kolossenok

Mining Engineering Faculty Research & Creative Works

Results of the investigation of the operation of explosive-driven high-voltage shock wave ferromagnetic generators (FMGs) in the open circuit and charging modes are presented. FMGs are based on the transverse (when the shock wave propagates across the magnetization vector M) shock demagnetization of Nd2Fe14B hard ferromagnetic energy-carrying elements of diameter 2.22 cm and length 2.54 cm (volume 8.5 cm3). In the charging mode the capacitance of capacitor banks compatt was varied from 18 to 36 nF. The energy transferred to the capacitor bank reached 0.38 J. FMGs provided pulsed powers of 35-45 kW in times ranging from 10 to 15 …

Go to article

Assessment Of Engineering Mechanics Instructional Multimedia In A Variety Of Instructional Settings, Richard H. Hall, Nancy Hubing, Timothy A. Philpot, Ralph E. Flori, Vikas Yellamraju Oct 2004

Assessment Of Engineering Mechanics Instructional Multimedia In A Variety Of Instructional Settings, Richard H. Hall, Nancy Hubing, Timothy A. Philpot, Ralph E. Flori, Vikas Yellamraju

Business and Information Technology Faculty Research & Creative Works

Students from Ten Schools, Representing Seven Countries, Used Interactive Multimedia as a Part of their Engineering Statics Classes. the Software Consisted of Four Modules, Which Focused On: Mohr's Circle; Centroid and Moment of Inertia; Stress Transformation; and Structural Analysis. the Students Completed On-Line Surveys About their Experience with the Software. Analysis of the Results Indicated that Students Rated their Knowledge of the Subject Matter Covered in the Software as Increasing Significantly as a Consequence of using the Software. However, This Increase Was Substantially More Pronounced for Students in U.S. Schools. Students Rated the Software as Significantly More Effective Than their …

Go to article

Adjusting The Low Energy Threshold For Large Bodies In Pet, John W. Wilson, Timothy G. Turkington, James G. Colsher Jan 2004

Adjusting The Low Energy Threshold For Large Bodies In Pet, John W. Wilson, Timothy G. Turkington, James G. Colsher

Mining Engineering Faculty Research & Creative Works

The performance of a PET scanner on three different phantom sizes was studied as a function of low energy threshold (LET). Phantom cross sections ranged from 20 cm diameter circular to 28 cm x 43 cm oval and LET''s ranged from 350 keV to 475 keV, in 25 keV increments. System sensitivity, scatter fraction, and NEC were measured over a wide range of radioactivity levels. Increasing the low energy threshold lowered both sensitivity and scatter fraction. The statistical quality of the raw data was maximized for the 425 keV setting for all three phantoms. System stability and uniformity of response …

Go to article

Compact High-Voltage Generator Of Primary Power Based On Shock Wave Depolarization Of Lead Zirconate Titanate Piezoelectric Ceramics, Sergey I. Shkuratov, Evgueni F. Talantsev, Latika Menon, Henryk Temkin, Jason Baird, Larry L. Altgilbers Jan 2004

Compact High-Voltage Generator Of Primary Power Based On Shock Wave Depolarization Of Lead Zirconate Titanate Piezoelectric Ceramics, Sergey I. Shkuratov, Evgueni F. Talantsev, Latika Menon, Henryk Temkin, Jason Baird, Larry L. Altgilbers

Mining Engineering Faculty Research & Creative Works

The design and performance of a compact explosive-driven high-voltage primary power generator is presented. The generator utilizes a fundamental physical effect—depolarization of ferroelectric materials under longitudinal shock wave impact, when the shock wave is initiated along the polarization vector P. These primary power sources, containing energy-carrying elements made of lead zirconate titanate poled piezoelectric ceramics, with the volume from 0.35 to 3.3 cm3, are capable of producing pulses of high voltage with amplitudes up to 21.4 kV. The amplitude and full width at half-maximum of the high-voltage pulses are directly proportional to the thickness of the energy-carrying element, with coefficients …

Go to article

Optimizing Sequential Dual Tracer P.E.T. Studies Using A Combined 2d/3d Imaging Protocol, John W. Wilson, S. Borges-Neto, Timothy G. Turkington, James G. Colsher, R. E. Reiman, R. E. Coleman Jan 2004

Optimizing Sequential Dual Tracer P.E.T. Studies Using A Combined 2d/3d Imaging Protocol, John W. Wilson, S. Borges-Neto, Timothy G. Turkington, James G. Colsher, R. E. Reiman, R. E. Coleman

Mining Engineering Faculty Research & Creative Works

We have investigated a combined 2D/3D protocol for minimizing contamination in dual tracer P.E.T. studies in which the tracers are administered on a timescale that is short compared to the half-lives. We have performed a series of phantom studies on an Advance and a Discovery ST (GE Healthcare Technologies), using a torso phantom with cardiac insert (Data Spectrum Corporation) to simulate a combined FDG and NH3 scan protocol for a patient with ischemia. The phantom was imaged in a series of alternating 2D/3D acquisitions as it decayed over 6 half-lives. By comparing 2D and 3D images, we have verified that …

Go to article

Method Of Creating Ultra-Fine Particles Of Materials Using A High-Pressure Mill, Marian Mazurkiewicz, B. E. Conrad Jan 2004

Method Of Creating Ultra-Fine Particles Of Materials Using A High-Pressure Mill, Marian Mazurkiewicz, B. E. Conrad

Mining Engineering Faculty Research & Creative Works

A method for creating ultra-fine particles of material using a high-pressure mill is described. The method includes placing a material in a first chamber and subjecting the material to a high-pressure fluid jet to divide it into particles. These particles are then transferred to a second chamber in which they are subjected to cavitation to further divide the particles into relatively smaller particles. These relatively smaller particles are then transferred to a third chamber, in which the particles collide with a collider to still further divide them into ultra-fine particles of the material. The mill of the present invention includes …

Go to article

Novel Concepts For Monitoring The Stability Of Open Pit Mine Highwalls Using Radar Interferometry And Spectral Imaging, Jami Girard Dwyer Jan 2003

Novel Concepts For Monitoring The Stability Of Open Pit Mine Highwalls Using Radar Interferometry And Spectral Imaging, Jami Girard Dwyer

Masters Theses

"Ground control problems at surface mining operations can occur for a variety of reasons. The geologic setting, rock strengths, joint spacing, orientation, pore pressures, and many other factors contribute to slope instabilities that range from small rock falls to massive slides of material. While much of this ground movement can be predicted or controlled, each year many completely unexpected failures occur. This poses serious safety and economic issues for the mining industry, since any unanticipated movement of the ground increases the potential for significant property damage, injuries, and even death. In the United States alone, 70 people died in slope …

Go to article

Method Of Scrapping Steel Structures, G. E. Shapiro, Paul Nicholas Worsey Jan 2003

Method Of Scrapping Steel Structures, G. E. Shapiro, Paul Nicholas Worsey

Mining Engineering Faculty Research & Creative Works

A method of breaking up a structure for the recovery of steel as scrap. The structure has steel plates forming a compartment secured to framing in the compartment. The method includes at least partially filling the compartment with a substantially incompressible substance and placing explosive in the substance in the compartment. The explosive is sufficient and adapted on detonation thereof to pressurize the compartment to the extent of causing separation of the plates from the framing. The method further includes detonating the explosive.

Go to article

First Prev Next Last