Mining Engineering Commons^™

Investigation And Comprehensive Utilization Of Resources In Closed Coal Mines In Anhui Province, China, Liu Feiyue, Chen Wanyun, Yang Ke, Duan Minke, Liu Qinjie, Yang Lingyue

Coal Geology & Exploration

[Objevtive] With the continuously intensive exploitation of coal resources and the structural reform of energy supply, many coal mines in Anhui Province have been closed due to resource depletion or backward production capacity. However, the closed coal mines still host resources such as underground spaces, residual coals, gas, mine water, land, and infrastructure equipment. Hence, reutilizing resources in closed coal mines holds significant engineering value and economic benefits. [Methods] Based on the general information and reutilization status of 59 coal mines in Anhui Province that have been closed since 2013, this study analyzed the distribution characteristics, residual resources, and reutilization …

Physical Simulation Experiments On Mining-Induced Water Inrushes From Coal Seam Floors: Advances In Research And Prospects, Zhang Pingsong, Ou Yuanchao

Coal Geology & Exploration

[Objective] Water inrushes from floors are subjected to the superimposed effects of factors such as specific geological structures, water-rock-stress coupling, and mining disturbance, proving complex, concealed, and abrupt. [Methods] Physical simulation experiments can effectively reproduce the environments of the floors and confined water, intuitively present the whole process of both mining-induced fracture propagation in the floors and the path evolution of water inrushes, and obtain multi-source data of all disaster stages in a real time manner. Therefore, such experiments enjoy unique advantages in investigating water inrushes from floors. [Results and Conclusions] This study reviews the research achievements in water inrushes …

A High-Resolution Method For Processing Coal Measures Seismic Data Based On Anisotropic Medium Theories And Its Application, Li Huiting, Chang Suoliang, Zhang Sheng, Guan Wenyuan, Zhao Xing, Wang Weiqian, Tantai Mingjun, Gao Kaixin

Coal Geology & Exploration

[Objective] The increasing importance of the exploration and exploitation of deep resources poses new requirements for high-precision seismic exploration. Given that conventional isotropy-based data processing methods are no longer applicable to the coal-bearing strata with strong anisotropy. [Methods] This study proposed a method for processing seismic data based on theories of both transverse isotropy medium with a vertical symmetry axis (VTI) media and transverse isotropy with a horizontal axis of symmetry (HTI) media. First, to characterize the depositional characteristics of coal-bearing strata, this study analyzed the features of VTI media, revealing that high-order dynamic correction can effectively eliminate anisotropy-induced event …

Modified Method For Assessing The Required Expenditures And Estimated Time Of Hard Coal Mine Liquidation, Andrzej Chmiela, Małgorzata Wysocka, Adam Smoliński

Journal of Sustainable Mining

The restructuring of hard coal mining requires significant budgetary expenditures. A comprehensive scientific approach may facilitate the rationalisation and minimisation of mine closure costs. This study proposes a method for the preliminary estimation of the costs and time required for the potential liquidation of a hard coal mine. In addition to a literature review, a statistical analysis and a case study, personal interviews were conducted with individuals with direct management over the restructuring, reclamation and liquidation processes pertaining to mines undergoing closure.

The assessment method is based on an analysis of the mine liquidation costs, divided into successive years of …

Study On Law And Influencing Factors Of Air Leakage In Isolated Island Working Face With Large Burial Depth, Gang Wang, Mingze Xia, Shuliang Xie, Hao Xu, Shuxin Wang, Xintai Deng

Journal of Sustainable Mining

During the mining of a single coal seam isolated island work surface with large burial depth, the high mine pressures can crush and break the protective coal pillars, causing serious air leakages in the rear goaf. Herein, we use the analytic hierarchy process(AHP) to determine the main influencing factors of air leakage in island mining face. The air leakage source and sink in goaf were determined by measuring the differential pressures between the island mining face and the adjacent goaf using the energy level measurement method. The air volumes in the roadways were monitored on site to quantitatively analyze the …

Prototype Device For Measuring The Dustiness Of Stone And Lime Dust Used In Explosion Prevention, Adrian Toman, Zdzisław Dyduch, Tomasz Skowronek

Journal of Sustainable Mining

This paper presents the prototype of a device for measuring the dustiness of powdered materials by means of a new measurement method. The currently employed stationary laboratory device, utilised in KD “Barbara”, uses the attenuation of a radiant flux transmitted through a dust cloud induced by a manually generated air blast. The new device uses the same measurement method, but it includes modern elements based on a microprocessor, a laser line generator instead of an LED diode, and a precise multi-channel detector. The generated quantity of the mixture (dust and air) is strictly determined and precisely dosed via buffer containers, …

Tracking Mining Company Electric Vehicles For Sustainable Development Optimization Using Distributed Ledger Technologies, Teodora Hristova

Journal of Sustainable Mining

It is established that based on the industrial revolutions towards Industry 5.0, the population of the Earth and its well-being are increasing. To preserve and improve living conditions the development in all spheres of life is by the paradigm of sustainable development. Through the prism of the mining industry, one step could be the introduction of circular economy measures for digitized tracking of materials, repairs, consumed electricity, safety, and finances. Implementing of electric cars is an option to achieve this goal through automation, manageability, and data traceability via Industry 4.0 technologies. Such are blockchain technologies, IoT, V2V, and others. For …

Double Acting Liberation Of Ni And Co In The Pre-Treatment Process To Increase Recovery Of Nickel From Low-Grade Nickel Laterite, Eni Febriana, Muhamad Irham Mulyadi, Wahyu Mayangsari, Januar Irawan, Iwan Setiawan, Ahmad Maksum, Florentinus Firdiyono, Soesaptri Oediyani, Agus Budi Prasetyo, Johny W. Soedarsono

Journal of Sustainable Mining

This study highlights the effectiveness of employing double-acting liberation to release Ni and Co from the complex phases of the low-grade nickel laterite. It includes the addition of concentrated sulphuric acid and NaF as well as the heat treatment prior to roasting and leaching processes to improve the destruction of the complex phases contained. The finding describes that dehydration of iron sulfate and decomposition of the lizardite at a lower temperature, 270°C, were occurred in the pre-treatment process, followed by hematite formation in the roasting process. It subsequently accelerated Ni and Co extraction in the pregnant solution and omitted Fe …

Exploring A Fly Ash-Based Grouting Material For Toughening Through In Situ Polymerization Of Acrylamide, Zhang Yuehong, Wang Xiaodong, Wang Hai, Wu Boqiang, Ji Zhongkui, Zhu Shibin, Han Le, Feng Longfei

Coal Geology & Exploration

Efficiently controlling the water inflow (loss) of burnt rocks in the roof of coal mining faces requires grouting reinforcement materials with excellent compressive toughness. Silicate cement-based grouting materials, characterized by low costs, have been extensively applied to grouting reinforcement in coal mines. However, their hardened grout is susceptible to deformation, exhibiting poor toughness. By employing the in-situ polymerization of acrylamide (AM) for toughening, this study investigated the effects of AM, cross-linking agent, initiator, and water-cement ratio on the setting time, swelling capacity, compressive strength, and toughness index of the fly ash-based grouting materials. Furthermore, the microstructures of the hardened grout …

Some Reflections On The Application Of Machine Learning To Research Into The Theoretical System Of Mine Water Prevention And Control, Yao Hui, Yin Huichao, Liang Manyu, Yin Shangxian, Hou Enke, Lian Huiqing, Xia Xiangxue, Zhang Jinfu, Wu Chuanshi

Coal Geology & Exploration

The theoretical system of mine water prevention and control encompasses three fundamental aspects: disaster-causing mechanisms, risk evaluation, and disaster prediction. This theoretical system, having undergone rapid development over the past 20 years, aims to gain insights into the behavior characteristics of mine water and predict its evolutionary trend, thus serving the prevention and control of water disasters in mining areas. Applying machine learning, a powerful tool for data analysis and mining in the era of big data, to research into the theoretical system has garnered considerable attention. This study focuses on the specific applications of machine learning to the three …

Construction And Analysis Of A Method For Grading Long-Term Vegetation Carbon Sink In Waste Dumps Of An Open-Pit Coal Mine, Yang Fei, Cui Kuankuan, Zhang Chengye, Li Jun, Wang Jinyang, Du Tianmeng, Zhang Haoran

Coal Geology & Exploration

Vegetation carbon sink serves as a crucial indicator for the ecological assessment of an open-pit coal mine. The accurate inversion and grading of vegetation carbon sink play a significant role in exploring the ecological restoration of coal mines. This study proposed a method for grading vegetation carbon sink of an open-pit coal mine based on the particle swarm optimization (PSO) algorithm. Specifically, using a light use efficiency (LUE) model, this study first determined the spatio-temporal distributions of the 2005‒2020 vegetation carbon sink in the waste dumps of the Shengli No.1 open-pit coal mine through inversion based on Landsat images and …

Dynamic Simulations And Applicability Evaluation Of Novel Perforation Techniques, Bi Gang, Yuan Peijie, Han Fei, Fu Shuaishuai, Wu Jiemin, Ma Ying

Coal Geology & Exploration

The development and improvement of perforated completion techniques hold great practical significance and value for efficient testing and exploitation of oil and gas fields. However, conventional shaped-charge perforation for well completion of low-permeability reservoirs (e.g., low-permeability coal seams) suffered high seepage resistance and reduced productivity due to the presence of compaction damage zones. To achieve enhanced exploitation efficiency of low-permeability reservoirs, novel perforation techniques, including self-cleaning and after-effect perforation, have been proposed. However, their perforation performance and applicability remain ambiguous. Based on the explicit time integration algorithm and fluid-structure interaction mechanism of LS-DYNA, this study proposed a method for finite …

A Simulation Study Of Mechanisms Behind Water Inrush From Fault-Bearing Floors Of Ultra-Thick Coal Seams Under Loading And Unloading At Significantly Variable Amplitude, Li Hao, Zhu Kaipeng, Guo Guoqiang, Zhou Yang, Kang Zhiqin

Coal Geology & Exploration

Ultra-thick coal seams feature large stope spaces and extensive disturbance ranges. Significantly variable amplitude loading and unloading are prone to cause the fault rupture of floors of ultra-thick coal seams, inducing water disasters. Numerical simulation serves as a critical method for revealing the fault reactivation and water inrush mechanisms at the floors of ultra-thick coal seams. The key of this method is to accurately inflect the coupling characteristics of rock mass rupture and fissure water under significantly variable amplitude loading and unloading. This study determined the correlations of the damage variable with plastic strain and stress, deriving the equations for …

Geochemical Characteristics And Influencing Factors Of Deep Coalbed Methane In The Linxing-Shenfu Block, Wu Peng, Hu Weiqiang, Li Yangbing, Ma Litao, Li Yong, Zhao Fei, Niu Yanwei, Chen Jianqi, Li Panpan, Liu Zaizhen, Li Chenchen, Cao Di, Liu Cheng

Coal Geology & Exploration

Identifying the origin and geochemical characteristics of deep coalbed methane (CBM) is critical for its exploration and production. This study examined the desorbed gas from deep-CBM parameter wells in the Linxing-Shenfu block on the eastern margin of the Ordos Basin. It systematically tested the composition, content, and carbon isotopes of CBM in coal seams Nos. 8 and 9. In combination with the degree of thermal evolution, gas-bearing properties, coal seam burial depths, geological structures, and hydrogeologic conditions, it delved into the geochemical characteristics and influencing factors of deep CBM. The results show that the deep CBM in the study area …

Anti-Channeling Methods For Coalbed Methane Production Using L-Type Horizontal Wells, Liu Zhan, Zhang Qunxia, Geng Yuxin, Luo Dan, Wang Minggang

Coal Geology & Exploration

Coalbed methane (CBM) production using L-type horizontal wells can yield stable single-well production of up to above 8 000 m³/d. However, due to the lack of sand settling pockets, L-type horizontal wells fail to achieve gas-water separation under the action of gravity. Consequently, gas channeling from tubing is prone to occur, significantly decreasing pumping efficiency and restricting further drainage and pressure reduction. By optimizing the lifting process for production in the early stage, the gas channeling from tubing has been somewhat alleviated. However, the anti-channeling effects remain unsatisfactory in low-fluid-pressure and high-yield gas wells. This study examined L-type …

Development Of Remote Control System For Automatic Drilling Rig Used In Coal Mine, Dong Hongbo, Yao Ningping, Wang Tianlong, Ma Bin, Peng Guangyu

Coal Geology & Exploration

In response to the problems of high labor intensity and great safety risk of drilling rig under the complex construction environment, a set of remote monitoring system for automatic drilling rig of coal mine was developed using the electronic circuit, measurement sensing, remote control, video monitoring and big data technologies. The system, based on ZDY4500LFK coal mine drilling rig, has implemented the three control modes: in-line-of-sight control, underground centralized control and ground remote monitoring. Besides, a cloud automatic drilling rig management and control platform was established. Specifically, the in-line-of-sight monitoring is used to realize the accurate operation of drilling rig …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

A Preliminary Study Of Coalbed Methane Adsorption At Fractal Interfaces, Jin Yi, Li Yani, Song Huibo, Zhao Mengyu, Yang Yunhang, Chen Zenan

Coal Geology & Exploration

The adsorption and desorption mechanisms of coalbed methane (CBM) are foundational for revealing CBM accumulation mechanisms and achieving efficient CBM exploitation. Studies have indicated that coal reservoirs exhibit complex pore structures with fractal features, significantly influencing CBM adsorption at pore-solid interfaces. Based on a comparative analysis of several common adsorption models for gas-solid interfaces and a summary of their characteristics and applicable conditions, this study suggests that all these adsorption models still rely on the stationary assumption of adsorption selectivity for the description and application of CBM adsorption behavior at fractal interfaces while overlooking the scale invariance of the adsorption …

Dynamic Mechanisms Of Coal And Gas Outbursts Based On A Multi-Zone Combined Coal Model, Li Feng, Wang Chenchen, Wang Bo, Jing Yadong, Yan Zhengxu, Zhang Minbo

Coal Geology & Exploration

Coal and gas outbursts (hereafter referred to as outbursts) severely affect coal mining safety. However, many scientific problems underlying the outbursts remain unsolved. To minimize the influence of anisotropy in the mechanical properties of coals on research into outbursts, this study constructed a multi-zone combined coal model. Based on the stress distribution of overlying strata and the stress wave propagation mechanisms, this study located the weak zone of coals, shrinking the research object from the outburst center to the weak zone. Given that outbursts are triggered by the disturbance of external dynamic load, this study examined the propagation patterns of …

Evolutionary Mechanisms And Models Of Strain, Porosity, And Permeability Of Compacted Broken Coals, Li Lei, Lu Shouqing, Chu Tingxiang, Zhong Xiaoxing, Liu Chongyang, Ren Ting

Coal Geology & Exploration

Residual coal areas in caving zones of goaves in coal mines serve as primary sites for low-temperature reactions between coal and oxygen. Hence, exploring the evolutionary models of the strain, porosity, and permeability of coals in these areas holds great significance for gaining a deep understanding of the spontaneous combustion process and regularity of coals. Based on the self-developed experimental device for gas seepage in compacted broken coals, this study explored the evolutionary patterns of the strain, porosity, and permeability of compacted coals with single/mixed particle sizes during gas seepage. Furthermore, this study analyzed the variations in the strain, porosity, …

Botdr-Based Horizontal Deformation Monitoring Of Section Coal Pillars, Chai Jing, Hao Hongru, Yang Jianfeng, Gao Dengyan, Gao Kuiying, Chen Jianhua, Yang Lei, Liu Zeyu

Coal Geology & Exploration

To address potential safety hazards like microcrack initiation, deformation, and failure inside coal pillars, this study monitored the horizontal deformations of coal pillars using the Brillouin optical time-domain reflectometry (BOTDR)—a distributed optical fiber sensing technology. Firstly, this study established a method for converting the axial strain of optical fibers into horizontal deformations based on a theoretical analysis of the failure and bulking characteristics of coal pillars. Secondly, it determined the axial tensile response of metal-based cord-shaped sensing optical fibers by conducting laboratory tests. Then, it corrected the strain coefficient based on the deformation and failure patterns of coal pillars. Finally, …

Carbon Microspheres In Natural Coke: Optical Microscopic Characteristics And Their Origin And Implications, An Yanfei, Chen Kaixin, Wang Yaqiao, Cheng Shuo, Huang Jian, He Shuyang, Wang Shengjian

Coal Geology & Exploration

Carbon microspheres (CMs) in natural coke are formed when coal seams undergo magma-induced rapid thermal metamorphism. Analyzing the origin of the optical microscopic characteristics of CMs assists in gaining deep insights into the rapid thermal carbonization and metamorphism of coals. This study examined the natural coke samples rich in CMs from Shitai Coal Mine in Huaibei, Anhui Province. Using experiments like high-resolution reflected polarized light microscopy and scanning electron microscopy (SEM), this study characterized the particle sizes, distribution, optical microscopic characteristics, and ultramicrofabrics of CMs in natural coke, revealing the origin and thermal evolution implications of their optical anisotropy. The …

Technologies For Water Hazard Prevention And Control In Burnt Rock Aquifers Within Concealed Burnt Areas, Wang Hai

Coal Geology & Exploration

Burnt rocks are extensively distributed in northwestern China, featuring well-developed pores and fractures and abundant water, emerging as primary aquifers in this region. The burnt rocks in concealed burnt areas in this region show inconspicuous surface remains, complicating their identification. Penetrating burnt rock aquifers in coal mining will lead to water hazard and destroy water resources in these aquifers. To prevent and control water hazard in burnt rocks within concealed burnt areas and preserve water resources in burnt rock aquifers, this study analyzed the distributions of burnt rocks in China and the effects of water in them on coal mining. …

Water Inrush Mechanism And Water-Conducting Fractured Zone’ Developmental Patterns Of A Typical Ultra-Thick Coal Seam In The Huanglong Coalfield During Fully Mechanized Mining, Yan Heping, Li Wenping, Duan Zhonghui, Yang Yugui

Coal Geology & Exploration

The mining of thick coal seams in the Huanglong Jurassic coalfield has led to the formation of high water-conducting fractured zones, which are prone to connect the extremely thick sandstone aquifers of the overlying Cretaceous Luohe Formation. Qinggangping Coal Mine in the coalfield exhibits the typical characteristics of pulsed water inrushes during coal mining, posing a severe threat to safe mining. This study investigated the fully mechanized mining face 42105 in Qinggangping Coal Mine. Using 3DEC discrete element simulation, flushing fluid leakage in boreholes, integrated geophysical exploration, and borehole TV, this study examined the developmental patterns of the water-conducting fractured …

Research On Digital Twin-Driven Tracking, Positioning And Collision Detection Method Of Excavating And Anchoring Equipment, Yang Wenjuan, Zhao Dian, Zhang Xuhui, Chen Xin, Zheng Xili, Liu Yanhui, Zhang Ran, Wan Jicheng

Coal Geology & Exploration

The automation of excavating and anchoring operation is critical for intelligent excavation of coal mine roadway. Aiming at the challenges of relative pose measurement and collision detection during the alternating operation of the current excavating and anchoring equipment, a digital twin-driven tracking, positioning and collision detection method was proposed. Firstly, in order to overcome the influence of low illumination, high dust and complex background interference in the underground excavating face, the multi-point infrared LED target is taken as the information source, the infrared LED feature point image is collected by industrial camera, the center of the spot is extracted using …

Weight And Resistance Reduction Mechanism Of Drilling Rods For Drilling In Soft Coal Seam And Its Application, Wang Yonglong, Guo Jiakuan, Yu Zaijiang, Du Kang, Sun Yuning

Coal Geology & Exploration

Gas drainage boreholes during construction is a necessary means to control gas hazards. In response to the issues such as high drilling resistance, low drilling efficiency, and high labor intensity caused by the significant self-weight of the drilling rod in drilling into the soft coal seams, a research approach of reducing the self-weight and lowering the drilling resistance by optimizing the drilling rod structure was proposed. Thus, a four-winged concave grooved drilling rod was designed to address both of its advancing resistance and rotating torque losses. Meanwhile, a drilling resistance model for the drilling rod was established. On this basis, …

Intelligent Identification Method Of Drilling Fluid Rheological Parameters Based On Machine Learning, Liu Changye, Yang Xianyu, Cai Jihua, Wang Ren, Wang Jianlong, Dai Fanfei, Guo Wanyang, Jiang Guoshe, Feng Yang

Coal Geology & Exploration

The rheology of drilling fluid, which characterizes its flow and deformation, is vital for transporting and suspending rock cuttings as well as for enhancing the drilling rate. Precise control of drilling fluid rheological parameters is essential to ensure borehole cleanliness and efficient drilling. This paper proposes an intelligent identification method for drilling fluid rheological parameters based on Convolutional Neural Networks (CNNs). The method employs magnetic stirring to generate stable images of drilling fluid flow, uses various data augmentation methods to increase the number of images and create a database, thereby enhancing the model’s robustness and generalization capabilities. The AlexNet CNN …

Analysis Of The Effect Of Different Surface Preparation Methods On Corrosion Resistance And Adhesion Strength Of Astm A36 Steel Substrate With Surface Tolerant Epoxy Paint As Coating Material, Irwan Wijaya Santoso, Daffa Aqila, Rini Riastuti, Rizal Tresna Ramadhani

Journal of Materials Exploration and Findings

In the industrial world, to extend the service life of materials, protection methods are carried out to slow down the material's corrosion rate. The protection method that is often used is the coating method. The coating method is a protection method by coating the substrate material using a coating material to prevent contact between the substrate material and the environment. In this research, the substrate material used is ASTM A36 steel and the coating material used is Surface Tolerant Epoxy paint. The independent variable used in this study lies in the surface preparation method which consists of: solvent cleaning, hand …

Bibliometric Review Of The Landscape And Thematic Structure Of Research On Sustainable Mining In Asean, 1942–2022, Nathatai Janjirawatna, Sirisuhk Rakthin, Philip Hallinger

Journal of Sustainable Mining

This bibliometric review addressed the lack of consolidated information on the current state of sustainable mining in the ASEAN region. The review analyzed bibliographic data associated with 539 Scopus-indexed documents on sustainable mining in ASEAN nations published through the end of 2022. Descriptive statistics identified a great disparity in the scope of research on sustainable mining practices across the ASEAN countries. Surprisingly, a significant portion of the extant research on sustainable mining in the region has been authored by scholars from outside of ASEAN. Keyword analyses highlighted several emerging research topics including life cycle assessment, conservation of natural resources, climate …

Near-Collapse Of The Geomagnetic Field May Have Contributed To Atmospheric Oxygenation And Animal Radiation In The Ediacaran Period, Wentao Huang, John A. Tarduno, Tinghong Zhou, Mauricio Ibañez-Mejia, Laércio Dal Olmo-Barbosa, Edinei Koester, Eric G. Blackman, Aleksey V. Smirnov, Gabriel Ahrendt, Rory D. Cottrell, Kenneth P. Kodama, Richard K. Bono, David G. Sibeck, Yong Xiang Li, Francis Nimmo, Shuhai Xiao, Michael K. Watkeys

Michigan Tech Publications

Earth’s magnetic field was in a highly unusual state when macroscopic animals of the Ediacara Fauna diversified and thrived. Any connection between these events is tantalizing but unclear. Here, we present single crystal paleointensity data from 2054 and 591 Ma pyroxenites and gabbros that define a dramatic intensity decline, from a strong Proterozoic field like that of today, to an Ediacaran value 30 times weaker. The latter is the weakest time-averaged value known to date and together with other robust paleointensity estimates indicate that Ediacaran ultra-low field strengths lasted for at least 26 million years. This interval of ultra-weak magnetic …