Mining Engineering Commons^™

Stress-Strain Behavior Of Specimens Of Near-Monolithic Synthetic Lightweight Aggregate, Annika Han, Chris Swan

World of Coal Ash Proceedings

No abstract provided.

Use Of Coal Ash In Transportation Structures In Indiana, Sung Min Yoon, Nayyar Siddiki

World of Coal Ash Proceedings

No abstract provided.

Deep Well Injection For Ccr Leachate And Wastewater Management, Arlen Striegl, Todd Stong, Jacob Sauer, Shane Stockdill

World of Coal Ash Proceedings

No abstract provided.

Emergency Response For An Impoundment Dike Reconstruction, Matthew M. Pugh, Nick A. Parks

World of Coal Ash Proceedings

No abstract provided.

Repair Of Blocked Gravity Leachate Collection Line Using Trenchless Techniques, Michael G. Rowland, Pe, Brian G. Palmer, Pe

World of Coal Ash Proceedings

No abstract provided.

Mineralogical Transformation Of Coal Ash After Wet Pluviation, Chin-Min Cheng, Julia Sheets, Mehedy Amin, Omer Bozok

World of Coal Ash Proceedings

No abstract provided.

A Risk Evaluation Of Controlled Low-Strength Materials (Clsm) Containing Coal Combustion Products (Ccps) In Construction Projects, Kathleen R. Radloff, Ari S. Lewis, Andrew B. Bittner, Qian Zhang

World of Coal Ash Proceedings

No abstract provided.

The Horizontal Reactive Treatment Well (Hrx Well®): A New Remediation Technology For In Situ Contaminant Flux Control, Craig Eric Divine, Jesse Wright, Jack Wang, Margy Gentile

World of Coal Ash Proceedings

No abstract provided.

Emerging Clean Water Act Issues For Ccr Surface Impoundments, John Kondziolka, Kathleen Radloff, Andrew Bittner

World of Coal Ash Proceedings

No abstract provided.

Dewatering Ash – Progress Over The Last 5 Years, Greg M. Landry, Paul C. Schmall

World of Coal Ash Proceedings

No abstract provided.

Towards Development Of Sustainable Asphalt Pavement Using Off-Spec Fly Ash, Ahmed Faheem, Ahmed Abdalla, Konstantin Sobolev

World of Coal Ash Proceedings

No abstract provided.

Ccr Corrective Measures Assessment & Implementation – A Technical Roadmap And Smart Communication/Management Strategies, Steven F. Putrich, David Hagen

World of Coal Ash Proceedings

No abstract provided.

Upgrading The Properties Of Fly-Ash From Long-Term Storage, With Simultaneous Deagglomeration, Drying & Classification Using Atritor Technology, Andrew Rigg, Scott Coley, Paul Machacek

World of Coal Ash Proceedings

No abstract provided.

Lime Activated Coal Ash For Ccr Pond Closure Projects, Larry Gibson, Karen Slade

World of Coal Ash Proceedings

No abstract provided.

A Thermodynamic-Guided Approach To Recycle Off-Spec Fly Ash Into Lightweight Aggregate, Mohammad Balapour, Newell Moser, Edward J. Garboczi, Grace Hsuan

World of Coal Ash Proceedings

No abstract provided.

Beneficial Use Of Fly Ash As A Sustainable Building Material, Randall Stremmel, Thomas Weyand

World of Coal Ash Proceedings

No abstract provided.

In-Situ Stabilization For Hydraulic Control At Ccr Sites, Paul R. Lear

World of Coal Ash Proceedings

No abstract provided.

Study To Evaluate Future Ash Beneficial Use, Corina Maria Aldea, Gil M. Haines, Matt Bishop

World of Coal Ash Proceedings

No abstract provided.

Coal Quality & Combustion Impacts On Ash Chemistry, Rod Hatt

World of Coal Ash Proceedings

No abstract provided.

Real Time Pore Pressure Monitoring Of Ash And Construction-Induced Responses: The State Of The Practice, Paul C. Schmall, Chris Hardin, Kenneth Campbell, Ryan Smith

World of Coal Ash Proceedings

No abstract provided.

Field And Laboratory Methods To Demonstrate Monitored Natural Attenuation For Coal Combustion Product Constituents In Groundwater, Jim Redwine, Masa Kanematsu, Kristi Mitchell, Dimitri Vlassopoulos

World of Coal Ash Proceedings

No abstract provided.

Addressing Public Fear With Facts—Tva Coal Ash Fact Sheets, Melissa Hedgecoth, Lisa Jn Bradley, Rock Vitale, Neil Carriker

World of Coal Ash Proceedings

No abstract provided.

Developing Single Use Deposits Of Coal Derived Fly Ash As A National Resource, Nigel Cooke

World of Coal Ash Proceedings

No abstract provided.

Six Years Of Service, Supply, And Success: Processing Harvested Ccr From Impoundments, William Fedorka, P.E.

World of Coal Ash Proceedings

No abstract provided.

Flow Characterization In Mine Ventilation Fan Blade Design Using Cfd, Anwar Endris Hassen

Journal of Sustainable Mining

In axial ventilation fans, the generation of a uniform flow velocity is desirable for better efficiency. To that end, different fan blade types have been developed to achieve better flow uniformity. This article aimed to characterize the flow distribution and its uniformity in four blade designs, namely constant chord, tapered blade, skewed blade, and tapered skewed blade, using Computational Fluid Dynamics (CFD). The study employs an iterative study where key study decisions are made as the study progresses. The study began with the selection of a blade profile for the study. A comparative study between the NACA seven-digit and four-digit …

The Acoustic Camera As A Tool To Identify Belt Conveyor Noises, Piotr Bortnowski, Anna Nowak-Szpak, Maksymilian Ozdoba, Robert Król

Journal of Sustainable Mining

This paper explores the possibilities of using an acoustic camera as a tool that allows the verification of the correct construction and operation of individual elements of a belt conveyor. Based on the simultaneously recorded components - a video camera and measuring microphones, the sound pressure level map of the belt conveyor was created. The tests were carried out in laboratory conditions and covered the location and identification of individual noise sources. The verification consists not only of searching for dominant sound sources, but above all, of searching for frequencies in the analysed spectrum that should not occur during their …

Improving Real-Time Methane Monitoring In Longwall Coal Mines Through System Response Characterization Of A Multi-Nodal Methane Detection Network, Brian Philip Cappellini

Graduate Theses, Dissertations, and Problem Reports (ETD)

Machine automation and atmospheric monitoring are used by many industries to improve safety and productivity in the workplace. The underground Methane Watchdog System (MWS) is a multi-nodal network of sensors currently under development. The MWS aims to improve safety and productivity by introducing 10 compact sampling units designed to be easily integrated within the current roof support equipment of the mine. Each unit contains an array of sensors used to continuously monitor the environmental conditions which include methane concentration, temperature, pressure, and relative humidity. All MWS units report information back to a remote central processing hub (CPH) which collects nodal …

Computational Intelligent Impact Force Modeling And Monitoring In Hislo Conditions For Maximizing Surface Mining Efficiency, Safety, And Health, Danish Ali

Doctoral Dissertations

"Shovel-truck systems are the most widely employed excavation and material handling systems for surface mining operations. During this process, a high-impact shovel loading operation (HISLO) produces large forces that cause extreme whole body vibrations (WBV) that can severely affect the safety and health of haul truck operators. Previously developed solutions have failed to produce satisfactory results as the vibrations at the truck operator seat still exceed the “Extremely Uncomfortable Limits”. This study was a novel effort in developing deep learning-based solution to the HISLO problem.

This research study developed a rigorous mathematical model and a 3D virtual simulation model to …

Explosive Compaction Of Additively Manufactured Material, Phillip R. Mulligan, Cody Lough, Douglas A. Bristow, Edward Kinzel, Catherine E. Johnson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Selective Laser Melting (SLM) is an additive manufacturing (AM) technique that uses a laser to locally fuse material in a metal-powder bed. The process is performed in layers enabling significant geometric freedom over traditional manufacturing techniques. During the deposition process, the metal is locally melted and rapidly self-quenched, leading to rapid solidification with well-defined melt-pool boundaries. Analogies are often drawn to the microstructure created in welding, albeit extending to the entire part. The SLM process parameters are optimized to produce near full density metal parts. The process parameters can also be adjusted to produce local regions that are of unmelted …

Effect Of Geometry And Fluid Viscosity On Dynamics Of Fluid-Filled Cracks: Insights From Analog Experimental Observations, Haitao Cao, Ezequiel F. Medici, Gregory P. Waite, Roohollah Askari

Michigan Tech Publications, Part 1

Fluid-filled volumes in geological systems can change the local stress field in the host rock and may induce brittle deformation as well as crack propagation. Although the mechanisms relating fluid pressure perturbations and seismicity have been widely studied, the fluid-solid interaction inside the crack of a host rock is still not well understood. An analog experimental model of fluid intrusion in cracks between planar layers has been developed to study stress conditions at the margins and tips. A combined high-speed shadowgraph and a photoelasticity imaging system is used to visualize the fluid dynamics and induced stresses on the solid matrix. …