Tribology Commons^™

Nissan Leaf Disassembly Tool And Test Stand Design, Mariah Z. Hodge

Williams Honors College, Honors Research Projects

The Akron Engineering Tribology Laboratory has developed a water-based lubricant and aims to test and observe if the water-based lubricant could work in an electric vehicle environment. As parameters for creating a test stand to mimic an electric motor environment are not readily available online, the goal of this senior design project is to take apart a used Nissan Leaf engine to define the parameters a test stand must meet to accurately recreate an electric motor environment. Knowing these parameters, a test stand will then be designed for testing the water-based lubricants. The purpose of building a test stand to …

Design New Stage For Vacuum Pin On Disk, Miranda Boyd

Williams Honors College, Honors Research Projects

For my senior design project, I am redesigning the moving stage for the vacuum pin-on-disk test used in the Akron Engineering Tribology Lab. This system is used to evaluate bearings and lubricants for aerospace applications under controlled vacuum conditions. The current stage design limits flexibility when adjusting for different testing parameters, so my goal is to develop a new movable stage that allows for varying weights and loads to be applied accurately and safely. The redesigned stage will improve test efficiency, adaptability, and precision, ensuring the system can accommodate a wider range of experimental conditions and materials while maintaining compatibility …

Kruss Modifications, Anderson W. Howard

Williams Honors College, Honors Research Projects

My project focuses on modifying a test device in the AETL to allow for high temperature test to be performed. I am also adding modifications to make it safer to perform tests using the high-pressure system.

In-Situ Informed Modeling And Characterization Of Friction And Built-Up Edge In Machining Of Aerospace Alloys, Avery Hartley

Theses and Dissertations--Mechanical and Aerospace Engineering

Machining is by no means a new manufacturing process. However, it is separated from other traditional deformation processes by its extreme temperatures and strain rates. The function and life of a multitude of products and mechanical components are dependent on the material properties induced by changing the surface through machining. Furthermore, the tools used within machining are often expensive and material reserves are sparse. The understanding the mechanics of the machining process, especially related to the friction of the tool and workpiece, helps to further the life of tools and parts to minimize economic and environmental impact.

Current friction modeling …

Understanding The Microstructure And Tribological Performance Of Cocrfeni-Based High Entropy Alloys, Ali Azarmi

All Theses

Due to their higher wear resistance compared to conventional alloys, high entropy alloys (HEAs) are now being considered as candidates for parts undergoing sliding contact during their lifetimes. While the engineering field has built some knowledge related to the performance of selected high entropy alloys, such as the CoCrFeNi alloy, more research is needed to determine if (how) expansions from four to five principal alloying elements alter the performance compared to the initial alloy. In this study, we started this research effort by investigating the relative performance of CoCrFeNiMn and CoCrFeNiTi with respect to CoCrFeNi. The two primary alloying elements …

Synthesis Of Ni-Based Intermetallics By Electrolytic Plasma Processing Of Ti And Ti-Based Alloys, Chuzhong Zhang

Material Science and Engineering Dissertations - Archive

EPP is an innovative surface modification technique that enables the deposition of metal ions from the electrolyte and their integration with substrate atoms to form intermetallic compound surface layers. EPP offers advantages such as high deposition rates, environmental cleanliness, and operational simplicity. In this study, Ni-Ti intermetallic layers were successfully synthesized on a Ti-6Al-4V substrate using EPP. The properties of the resulting Ni-Ti intermetallic layers were characterized using SEM, EDS, XRD, TEM, nanoindentation, and tribology tests.

This work aims to understand the fabrication mechanism and investigate the effects of various processing parameters on the EPP process. Key factors such as …

Improving Tribological Properties Of Polydopamine/Polytetrafluoroethylene Coatings Through Incorporating Core-Shell Nanoparticles And Laser Surface Texturing, Firuze Soltani-Kordshuli

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a widely used polymer that has unique properties such as chemical and temperature resistance, corrosion resistance, low maintenance cost, and a very low coefficient of friction (COF). These distinctive properties have made PTFE a promising candidate for industrial applications where surfaces are in relative motion. PTFE can be utilized as a thin film solid lubricant to significantly reduce the friction between moving surfaces. However, PTFE coatings have low cohesion and poor adhesion to the substrate resulting in its low wear resistance. This fact limits the application of PTFE coatings in load-bearing situations. To address these limitations, an …

Timken Black Oxide False Brinelling Project, Elizabeth Kotzalas

Williams Honors College, Honors Research Projects

There is a known issue that occurs in wind turbine main shaft bearings, among other bearing types and applications during transportation or while the turbine is powered on, but the bearing is not spinning. This issue is damage that is confined to mostly the raceways but can damage the rollers over time. It is called false brinelling and is a material removal from the raceways due to repeated tiny vibrations of the rollers over the same area. A question was posed on whether black oxide surface treatment could reduce false brinelling wear on bearings in this application, and as a …

Surface Laser Texturing Of Cocrmo Alloys, Gabriel Dharwadker

Biomedical Engineering Undergraduate Honors Theses

Artificial orthopedic implants such as hip joints suffer from excessive wear due to excess friction between the polyethylene and cobalt-chromium-molybdenum surfaces of the device. This increase in friction causes a fraction of them to give out within ten years. Therefore, to minimize the probability of this happening, recent research has been conducted regarding laser surface texturing of the cobalt-chromium-molybdenum alloy components of artificial joints. These surface textures serve to mimic the native lubrication mechanisms of cartilage in natural joints, which, in a natural joint, lowers the friction. However, the production of these laser surface textures is still a field of …

Tribological Studies Of Thick Polytetrafluoroethylene Coatings Enhanced By Polydopamine And Nanoparticles, Sujan Kumar Ghosh

Graduate Theses and Dissertations

Polytetrafluoroethylene (PTFE) is a popular low friction solid lubricant with high chemical and thermal stability. Thick PTFE coatings have the potential for many tribological applications, such as replacing Tin-based Babbitt materials in journal bearings. However, the weak bonding strength to the substrate and the high wear rate of PTFE coatings are current limiting factors. The lack of understanding of their tribological properties and wear mechanisms in oil-lubricated conditions and how coating thickness affects the tribological performance further hindered the use of PTFE coatings. In this dissertation, polydopamine (PDA), a bio-inspired adhesive, is used as an underlayer for or as a …

Tribological Performance Of Novel Nickel-Based Composite Coatings With Lubricant Particles, Ignacio Tudela, Andrew J. Cobley, Yi Zhang

Friction

The present study is focused on the evaluation of the tribological performance of novel Ni/hBN and Ni/WS2 composite coatings electrodeposited from an additive-free Watts bath with the assistance of ultrasound. Lubricated and non-lubricated scratch tests were performed on both novel composite coatings and on standard Ni deposits used as a benchmark coating to have an initial idea of the effect of the presence of particles within the Ni matrix. Under lubricated conditions, the performance of the Ni/hBN composite coating was very similar to the benchmark Ni coating, whereas the Ni/WS2 behaved quite differently, as the latter did not only show …

Understanding The Evolution Of Surface Texture Under Boundary Lubrication, Salil T. Bapat

Graduate Theses and Dissertations

The objective of this research was to understand the evolution of surface texture under boundary/mixed lubrication (BL). Significant material/energy losses occur during BL because of direct contact between the two surfaces. Traditionally, tribofilms have been studied extensively for BL while textures have been used as a static engineering design parameter to enhance lubricant film properties. However, texture is dynamic at the tribological mating interface, where both physical and chemical interactions are continuously modulated. The evolution and the interplay between the tribofilm and texture is least studied in the literature, which is the focus of this research.

MoS2-based lubricants, known for …

Modeling And Computation Of The Maximum Braking Energy Speed For Transport Category Airplanes, Nihad E. Daidzic

Journal of Aviation Technology and Engineering

Transport-category or FAR/CS 25 certified airplanes may occasionally become braking energy capacity limited. Such limitation may exist when heavy airplanes are departing airports at high-density altitudes, on relatively long runways, and/or possibly with some tailwind component. A maximum braking energy VMBE speed exists which may limit the maximum allowable takeoff decision/action speed V1. The ever-existing possibility of high-speed rejected takeoff in such conditions may also limit the airplane gross weight for declared available distances. To gain deeper insights and acquire better understanding of the topic, a theoretical model of the maximum braking energy and the related VMBE speed for T-category …

Enhanced Tribological Properties Of Surfaces Patterned With Su8/Dlc Microstructures, Luke Osborn

Inquiry: The University of Arkansas Undergraduate Research Journal

In tribology (the study of friction, wear, and lubrication), it is known that micro-textured surfaces can reduce friction due to decreased contact area between two surfaces. The problem with many micro-textures, however, is their inability to withstand significant amounts of wear, thus limiting their potential uses and overall effectiveness. In this study, connected and isolated microstructures of SU8, a negative tone photoresist, coated with and without diamond-like carbon (DLC), were designed to investigate the effects of these microstructures and DLC coating on the tribological performance of a surface. Friction and wear studies were conducted using a tribometer; surface topography and …