Other Mechanical Engineering Commons^™

Aerosol-Assisted Synthesis Of Monodisperse Single-Crystalline Α-Cristobalite Nanospheres, Xingmao Jiang, Lihong Bao, Yung-Sung Cheng, Darren R. Dunphy, Xiaodong Li, C. Jeffrey Brinker

Faculty Publications

Monodisperse single-crystalline α-cristobalite nanospheres have been synthesized by hydrocarbon-pyrolysis-induced carbon deposition on amorphous silica aerosol nanoparticles, devitrification of the coated silica at high temperature, and subsequent carbon removal by oxidation. The nanosphere size can be well controlled by tuning the size of the colloidal silica precursor. Uniform, high-purity nanocrystalline α-cristobalite is important for catalysis, nanocomposites, advanced polishing, and understanding silica nanotoxicology.

Analysis Of Biomass/Coal Co-Gasification For Integrated Gasification Combined Cycle (Igcc) Systems With Carbon Capture, Henry A. Long Iii

LSU New Orleans Theses and Dissertations

In recent years, Integrated Gasification Combined Cycle Technology (IGCC) has become more common in clean coal power operations with carbon capture and sequestration (CCS). Great efforts have been spent on investigating ways to improve the efficiency, reduce costs, and further reduce greenhouse gas emissions. This study focuses on investigating two approaches to achieve these goals. First, replace the subcritical Rankine steam cycle with a supercritical steam cycle. Second, add different amounts of biomass as feedstock to reduce emissions. Finally, implement several types of CCS, including sweet- and sour-shift pre-combustion and post-combustion.

Using the software, Thermoflow®, this study shows that utilizing …

Wireless Solar-Powered Thermal Imaging Camera, Andy Bonk, Billy Mcvicker, Jacob Richardson

Mechanical Engineering

Creation of a mounted wireless self-powered thermal imaging camera system.

Wiihopp, Jeff Christian, Ben Hoselton, Derek Simon

Mechanical Engineering

Childhood obesity is becoming a growing problem in the United States. According to the CDC, childhood obesity has more than tripled in the past 30 years [7]. It can lead to health problems previously reserved for adults, such as diabetes, high blood pressure, and high cholesterol. For the team WiiHopp project, we plan to turn a JumpSport mini-trampoline into a controller for the Nintendo Wii console. The hope is to help turn the problem of video games and the laziness surrounding them into an active solution to combat the problem of childhood obesity.

Our goal is to produce an add-on …

Access|Closure Balloon Catheter Redesign Project, Keenan Bamburg, Yvette Castillo, Elizabeth Eskildsen

Mechanical Engineering

No abstract provided.

Engine Simulation And Diagnostic Test Bed: Final Design Report, Jeff Lewis, Cody Scott, Todd Smith

Mechanical Engineering

The San Luis Obispo High School Automotive Technology Shop has a 1991 Buick V-6 Engine which uses the OBD-I (On-Board Diagnostics, generation one) standard for diagnostic testing and troubleshooting. In order to expand the capabilities of the Automotive Technology program and allow students to gain first-hand experience troubleshooting older OBD-I engines, the shop has a need for this engine to become part of a diagnostic and troubleshooting test bed. Some of the diagnostic tests the students will perform include checking cylinder pressure, monitoring coolant system temperatures, interpreting error codes from the OBD-I system, and conducting enhanced smog testing. All of …

Golf Club Quality Control Device, David Mcdermott, Mark Severy

Mechanical Engineering

No abstract provided.

Engineering On The Rose Float: Final Project Report, Stephen Boles, Garrett Dong, Peter Hoonhout

Mechanical Engineering

The purpose of this project is to design the simple mechanical movement systems of the 2012 Cal Poly Tournament of Roses Float Parade to prevent failure. Three mechanisms were designed. One of the mechanisms is a tall building that has a superhero and helicopter rotating around the top; it also has the ability to rotate the top 2/3^rds of the mechanism to a 90 degree angle to fit under a 16.5 foot bridge. Another mechanism is the cars that look like they are driving on the pod’s road surface via train tracks underneath the surface. The cars will travel …

Synthesis, Structural, Optical And Mechanical Characterization Of Srb2O4 Nanorods, Rui Li, Lihong Bao, Xiaodong Li

Faculty Publications

Single crystalline strontium borate (SrB₂O₄) nanorods were synthesized for the first time via a facile sol–gel route at low temperature. The SrB₂O₄ nanorods have a good crystalline nature with the growth direction along the [511] orientation and they are transparent from the ultraviolet to the visible regimes. Nanoscale three-point bending tests were performed directly on individual nanorods to probe their mechanical properties using an atomic force microscope. The elastic modulus of SrB₂O₄ nanorods was measured to be 158.2 ± 2.8 GPa, exhibiting a significant increase compared with other borate nanostructures …

Thickness-Shear And Thickness-Twist Vibrations Of An At-Cut Quartz Mesa Resonator, Huijing He, Jinxi Liu, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We study thickness-shear and thickness-twist vibrations of an AT-cut quartz plate mesa resonator with stepped thickness. The equations of anisotropic elasticity are used with the omission of the small elastic constant c56. An analytical solution is obtained using Fourier series from which the resonant frequencies, mode shapes, and energy trapping are calculated and examined. The solution shows that a mesa resonator exhibits strong energy trapping of thickness-shear and thickness-twist modes, and that the trapping is sensitive to some of the structural parameters of the resonator.

In Vivo Three-Dimensional Blood Velocity Profile Shapes In The Human Common, Internal, And External Carotid Arteries, Alexey Kamenskiy, Yuris A. Dzenis, Jason N. Mactaggart, Anastasia Desyatova, Iraklis I. Pipinos

Department of Mechanical and Materials Engineering: Faculty Publications

Objective: True understanding of carotid bifurcation pathophysiology requires a detailed knowledge of the hemodynamic conditions within the arteries. Data on carotid artery hemodynamics are usually based on simplified, computer-based, or in vitro experimental models, most of which assume that the velocity profiles are axially symmetric away from the carotid bulb. Modeling accuracy and, more importantly, our understanding of the pathophysiology of carotid bifurcation disease could be considerably improved by more precise knowledge of the in vivo flow properties within the human carotid artery. The purpose of this work was to determine the three-dimensional pulsatile velocity profiles of human carotid arteries. …

California Polytechnic State University Wind Resource Assessment, Jason Allan Smith

Master's Theses

Wind resource assessment at California Polytechnic State University shows there is potential for wind power generation on Cal Poly land. A computational fluid dynamics model based on wind data collected from a campus maintained meteorological tower on Escuela Ranch approximately 5 miles northwest of campus suggests there are areas of Cal Poly land with an IEC Class III wind resource at a height of 80 meters above ground. In addition during the daytime when the campus uses the most energy there are large portions of land with annual average daytime wind speeds above 6.9m/s. These areas have been identified by …

Rehabilitation And Exercise Machine, Judith M. Burnfield, Yu Shu, Adam P. Taylor, Thad W. Buster, Carl Nelson

Department of Mechanical and Materials Engineering: Faculty Publications

An improved rehabilitation and exercise machine is provided which allows a person with physical limitations, disabilities or chronic conditions to use the machine in order to rehabilitate their muscles, improve joint flexibility, and enhance cardiovascular fitness.

Effects Of Mass Layer Dimension On A Finite Quartz Crystal Microbalance, Y. P. Kong, Jinxi Liu, Huijing He, Jiashi Yang

Department of Mechanical and Materials Engineering: Faculty Publications

In this paper, we investigate free thickness-shear and thickness-twist vibrations of a finite crystal resonator of AT-cut quartz carrying a thin mass layer at the central portion of its top surface operating as a quartz crystal microbalance. The equations of anisotropic elasticity are used with the omission of the small elastic constant c56. An analytical solution is obtained using Fourier series from which the resonant frequencies, mode shapes and vibration confinement by the mass layer are calculated and examined.

Vertical Track Modulus Trending, Shane Michael Farritor, Sheng Lu

Department of Mechanical and Materials Engineering: Faculty Publications

Systems and methods for determining a trend in Vertical track modulus are disclosed in accordance with embodiments of the present invention. Vertical deflection data is collected along a particular section of railroad track. A first set of Vertical track modulus is determined, based in part, on the collected vertical deflection data. At a second time, vertical deflection data is again collected along the particular section of railroad track to be used in determining a second set of vertical track modulus. At least the first and second sets of Vertical track modulus are analyzed to determine a math ematical algorithm that …

A Digital Hydraulic Valve, Actuated Using A Piezoelectric Linear Motor, Brian C. Bevill

Purdue Polytechnic Directed Projects

Proportional control in hydraulics is widely utilized. The most widely used current types of proportional valves utilize solenoid technology. While this technology has been around for decades and has been proven an effective means of control, there is always a demand for improved performance of advancing technologies. Integrating piezoelectric devices as a means to control hydraulic systems helps advance control for hydraulic systems.

Piezoelectric stack devices have been used to control hydraulic systems with success. Advantages of these stacks include being relatively small with a high power to weight ratio, using less energy than solenoid operations, and being fast acting. …

Olympic Bocce Ballers, Steven Erickson, William Haley, Taylor Vaughan

Mechanical Engineering

No abstract provided.

Piedras Blancas Light Station Vista Point Improvement Plan, Larissa Heeren, Reuben Juster, Annamarie Usher, John Rossi, Nick Mitchell

Mechanical Engineering

Piedras Blancas Light station Improvement Involved the design of two separate parking lot/vista point plans as well as the creation of a concrete Iron Ranger located near the gift shop on site.

Thermodynamic Based Model Eliciting Activities For Undergraduate Mechanical Engineering Education, Paul Nicholas Van Bloemen Waanders

Master's Theses

Undergraduate engineering education is designed to prepare students for their careers.  The rise of technology in modern engineering allows for a shift in the way undergraduates are prepared for the modern workplace.  Model Eliciting Activities (MEAs) allow students to think critically about their own work and allow instructors to analyze the students’ problem solving methods.  To ensure that new MEAs are as effective as possible they are subject to six basic principles: model construction, reality, generalizability, self-assessment, model documentation, and effective prototype.

This document focuses on evaluating new MEAs for their adherence to the six principles from an instructor's and …

Bevcool, Matthew (Matt) Slette, Ryan Talyat, Camille Sybert

Mechanical Engineering

A consumer product for rapidly cooling canned and bottled beverages.

Marauder Marine: Spearfishing Float Design, Kevin Glen, Kyle Lancaster, Andrew Wickham

Mechanical Engineering

No abstract provided.

Pop-A-Wheelie Design Team, Mackenzie Hill, Thuyen Nguyen, Shaun Van't Hul

Mechanical Engineering

The purpose of this report is to illustrate the Pop-a-Wheelie design team’s progression and implementation of a concept in regards to the project sponsored by Break the Barriers (BTB). The Pop-a-Wheelie design team was tasked to design two devices that will be attached onto wheelchairs. The devices should facilitate the independence of user’s ability to pop-a-wheelie and return to an upright position without any assistance. After a list of specifications was agreed upon, the design process initiated. All customer specifications are listed in Objectives section located in Chapter 1: Introduction. A complete engineering specification table can be found in the …

Cal Poly Human Powered Helicopter, Josiah Auer, Eric Behne, Dave Berry, Rebecca Hennings, James Koch, Ian Marquardt, Josiah Mayfield, Sean Miller

Mechanical Engineering

The following report encompasses the Cal Poly Human Powered Helicopter team’s efforts during the 2010-2011 academic year. The intention of this project is to further the knowledge of human powered helicopter design and to validate an ideal configuration through experimental tests and analysis. 

A. Background

The Sikorsky Prize offered by the American Helicopter Society has been the catalyst for many attempts at Human Powered Helicopter (HPH) flight. The requirement to win the prize is a continuous, human powered flight of more than 60 seconds that stays within a 10 meter square box and reaches an altitude greater than 3 meters …

Solar Powered Oil Well Site, Jonathan Hyland, Matthew Mastro, Kyle Moore

Mechanical Engineering

No abstract provided.

Optimization And Modeling Tools For Telescope Hexapod Structures, Michael Edward Feeney

Master's Theses

Hexapod trusses are an important element in many mechanical design systems. The natural frequency and stiffness behavior under geometric and mass variations of such structures is largely undocumented. Furthermore, the ability to quickly model hexapod designs and explore a large design-space in finite element software packages is, in general, time consuming and inefficient. The purpose of this project was to develop software tools that made design-space exploration (modeling and simulation processes) for hexapod structures drastically more efficient. Secondly, the project included an experimental analysis portion to demonstrate the various modal study techniques and to validate finite element analysis predictions. Lastly, …

A Virtual Supply Airflow Rate Meter In Rooftop Air Conditioning Units, Daihong Yu

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Virtual sensing technology aims to estimate difficult to measure, expensive, or new quantities by using multifarious mathematical models along with non-invasive and low-cost measurements. Such embedded intelligence is a key to improving the performance of building systems in terms of functionality, safety, energy efficiency, environmental impacts, and costs. Considering the progress that has been achieved over many various fields (e.g., process controls, automobiles, avionics, autonomous robots, telemedicine) within the last two decades, numerous intelligent features have been incorporated and enabled that would otherwise not be possible or economical.

To identify the potential opportunities and research/development needs of virtual sensing technology …

Simulation And Validation Of Two-Component Flow In A Void Recirculation System, Oscar Eduardo Daza

Master's Theses

Nuclear power plants rely on the Emergency Core Cooling System (ECCS) to cool down the reactor core in case of an accident. Occasionally, air is entrained into the suction piping of ECCS causing voids that decrease pumping efficiency, and consequently damage the pumps. In an attempt to minimize the amount of voids entering the suction side of the pump in ECCS, a Void Recirculation System (VRS) experiment was conducted for a proof of concept purpose. While many studies have been oriented in studying two-component flow behavior in ECCS, none of them propose a solution to minimize air entrainment. As a …

Design And Calibration Of A Wind Tunnel Facility For The Study Of Active Flow Control On Wind Turbine Blades, Christopher Paul Walter

Renée Crown University Honors Thesis Projects - All

Our group at Syracuse University has been working under Professor Mark Glauser as part of a wind consortium with the University of Minnesota and United Technologies Research Group. Our component of this project will be to develop a system which can be imbedded in an airfoil which can increase the efficiency of the airfoil. Along with developing this “intelligent blade,” we will also be characterizing the affect our control system will have on aerodynamic noise. To accomplish these goals, Syracuse University’s anechoic jet facility was remodeled to incorporate a wind tunnel within which we could run our experiments. Upon the …

Analysis Of A Monolithic Crystal Plate Acoustic Wave Filter, Huijing He

Department of Mechanical and Materials Engineering: Faculty Publications

We study thickness–shear and thickness–twist vibrations of a finite, monolithic, AT-cut quartz plate crystal filter with two pairs of electrodes. The equations of anisotropic elasticity are used with the omission of the small elastic constant c56 . An analytical solution is obtained using Fourier series from which the res-onant frequencies, mode shapes, and the vibration confinement due to the electrode inertia are calculated and examined.

Transverse Permeability Of Fibrous Porous Media, Ali Tamayol, Majid Bahrami

Department of Mechanical and Materials Engineering: Faculty Publications

In this study, the transverse permeability of fibrous porous media is studied both experimentally and theoretically. A scale analysis technique is employed for determining the transverse permeability of various fibrous matrices including square, staggered, and hexagonal arrangements of unidirectionally aligned fibers, as well as simple two-directional mats and simple cubic structures. In the present approach, the permeability is related to the porosity, fiber diameter, and tortuosity of the medium. In addition, the pressure drop in several samples of tube banks of different arrangements and metal foams are measured in the creeping flow regime. The pressure-drop results are then used to …