Ocean Engineering Commons^™

Acoustic Response Of The Cnt-Reinforced Multilayered Acoustic Foam Composites (Mafc), Trey Brauch

Electronic Theses and Dissertations 2020 - Present

Acoustic metamaterials are engineered materials designed to control and manipulate sound propagation. Many such systems incorporate acoustic foams due to their porous structure, low density, and high specific surface area, which promotes efficient sound absorption. However, a major limitation of conventional acoustic foams -particularly open-cell varieties- is their lack of waterproofing, rendering them unsuitable for underwater or moisture-prone environments. To address this limitation, a multilayered acoustic foam composite (MAFC) was developed as a lightweight, waterproof structure with enhanced sound absorption performance. The MAFC consists of five layers: the first and fifth layers are aluminum foam, providing structural integrity; the second …

On The Drainage Vortices Of Liquid In A Container With Two Outlets, Radivoje Stankovic

Electronic Theses and Dissertations 2020 - Present

Vortices that form over multiple drainage ports may exhibit a distinct, periodic alternating behavior, whereby the air core moves periodically between different drainage ports. The physical processes which govern this behavior have not yet been explained, despite the widespread and thorough attempts to describe the flow of water through single or multiple outlets. Early experiments on the alternating behavior of this vortex resulted in a nondimensional relation between the alternating frequency and water height and container geometry with an R2 = 0.91. Subsequent 2D PIV measurements of the flow were performed at different laser heights of 25 mm and 128 …

Tuning And Performance Of Pid Controlled Low Complexity Systems, Timothy Evans

Honors Theses

Proportional integral derivative (PID) controllers are used for precise position and orientation control in systems such as autonomous underwater vehicles (AUVs). This project supports the University of Southern Mississippi’s (USM) Robotics Club’s RoboSub AUV effort by developing, troubleshooting, and manually tuning PID controllers to characterize tracking performance and settling time across systems of increasing complexity. Initially, the project hypothesized that tracking performance would be reduced and settling times would increase as system complexity advanced from one degree-of-freedom (DOF) to two DOF. However, prior research was found that suggests that for small disturbances around an equilibrium state, separate PID-controlled DOFs can …

Identification Of Thruster Faults In Underwater Vehicles By Using Custom Encodings In Spiking Neural Networks, Donovan Gegg

LSU Master's Theses

Autonomous Underwater Vehicles (AUVs) are untethered robotic platforms used for tasks such as seafloor mapping, infrastructure inspection, and environmental monitoring. Recent technological advances have produced smaller, more affordable platforms, broadening access to research teams and small companies alike. This miniaturization comes at the cost of them handling drawbacks associated with a more compact machine such as reduced battery capacity as well as limited processing and sensing capabilities. These constraints make small-sized marine vehicle’s reliability critical as they can cause malfunctions, making the loss of a vehicle more likely. Actuator faults are particularly consequential as unintended and unstable control in an …

Portable Ice Cube Maker, Ayden Ziegler, Emiliano Hansen, Wyatt Engdahl, Dane Hansen

Mechanical Engineering

This Final Design Report outlines the senior design project undertaken by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo, for the development of a portable backpacking ice cube maker. The project aims to design, build, and test a lightweight, compact device that produces ice cubes for backpackers in remote outdoor environments. The goal is to create a functional prototype that is durable, user-friendly, and suitable for backcountry use. This document details background research, project objectives, and project plan, and current design status.

Captive Model Test For Hydrodynamic Derivatives Of Ship Maneuvering In Regular Head Waves, Pin-Yuan Huang, Zih-Yao Lin, Tsung-Yueh Lin, Fu-En Lee, Yan-Wei Lai

Journal of Marine Science and Technology–Taiwan

The motion of ship in wave can be discussed in seakeeping and maneuvering. In model tests, the former is found by the motion response of waves while the latter requires captive model test to acquire hydrodynamic derivatives. The hydrodynamic derivatives in waves are discovered to be different from those in calm water. To understand better the behavior of maneuverability in waves, maneuvering tests in a wide range of waves are performed in this study. This study presents an experimental investigation into the maneuvering behavior of a container ship in regular waves, covering a wide range of wavelengths from half to …

A Comprehensive Statistical And Regional Analysis Of Lng-Powered Marine Vessels On Ghg Mitigation Strategies Considering Existing Bunkering Stations And Gwp Values, Canberk Hazar, Onur Yuksel, Murat Bayraktar

Journal of Marine Science and Technology–Taiwan

This study aims to quantify and analyse emissions from marine vessels that can operate on liquefied natural gas (LNG) but continue to use conventional fuels, largely due to the limited availability of LNG bunkering stations (BSs) over long distances. Four regions have been identified as having high concentrations of LNG-fueled vessels but limited access to operational BSs: the West Coast of the United States of America (USA), South Africa–Good Hope–Madagascar, Northwest Africa, and Brazil. This selection is based on the geographical distribution of these ships and the existing infrastructure. Hourly greenhouse gas (GHG) emissions have been calculated by considering the …

Extending Low-Frequency Traveling-Wave Propagation In A Water-Filled Cylindrical Waveguide Using Active Impedance Control, William Slater

Open Access Dissertations

This dissertation investigates extending the frequency range over which a one-dimensional, plane traveling wave can be generated in a water-filled, steel-walled waveguide under ocean temperature and hydrostatic pressure conditions. The wave guide considered is a thick-walled, steel cylinder filled with a water/glycol mixture with a transducer at each end and a hydrophone array along the length. One transducer excites a plane wave while the other cancels reflections, resulting in a traveling wave in the waveguide. The current (open-loop) measurement system is advertised to generate traveling waves for low frequencies where only 3.4% of a wavelength can be measured (kL …

Experimental Rate Feedback Control Of A Model-Scale Hourglass-Shaped Heaving Point Absorber, James R. Halverson

Dissertations, Master's Theses and Master's Reports

Buoy geometry greatly affects a point absorber wave energy converter's dynamic response to waves. Finding the optimal buoy shape and control method remains an open research area focused on maximizing the conversion of wave kinetic energy into electricity. This work presents an experimental comparison of closed-loop energy extraction between a cylindrical and a truncated cone buoy, both with the same submerged volume, across various wave frequencies and amplitudes. To ensure a fair comparison, the optimal rate feedback gain is calculated for each buoy at each wave condition. Multiple metrics, including power output, capture width, and actuator force, are used to …

Application Of Reactive Power Theory To Wave Energy Converters Under Multi-Frequency Excitation: Analysis And Experimentation, Mckenna R. Collins

Dissertations, Master's Theses and Master's Reports

There is abundant energy surging in the oceans across the globe. However, there have been technological challenges in extracting that energy for use. Wave energy converter (WEC) technology is being developed to find innovative ways to convert wave kinetic energy into electricity, but there are still efficiency obstacles that inhibit large-scale use. Focusing on heave-point absorber control theory, this thesis continues the work to improve the efficiency of WECs. This is done by leveraging a superposition of linear mass-spring-damper models to analyze a WEC under multi-frequency excitation and applying proportional-derivative gains to each linear model. However, to analyze this system, …

Analytical And Data-Driven Modeling And Control Of Nonlinear Point Absorber Wave Energy Converters With Application To Cone–Cone Buoy Geometries, Houssein Yassin

Dissertations, Master's Theses and Master's Reports

This dissertation develops analytical modeling, numerical simulation, experimental validation, and data driven control methods for nonlinear point absorber wave energy converters, with particular emphasis on cone--cone buoy geometries. Geometry dependent nonlinear force models are first derived using pressure field and displaced volume formulations. These models show how buoy geometry produces nonlinear Froude--Krylov and restoring forces, including the dominant cubic behavior of cone--cone geometries.

The derived models are incorporated into a feedback linearization framework that compensates selected nonlinear dynamics while retaining the incident wave terms. An analytical optimal control formulation is also developed to maximize harvested energy in nonlinear, nonautonomous systems …

Electronic Bills Of Lading And Blockchain Technology: A Regulatory Perspective, Hsin-Hua Tsai

Journal of Marine Science and Technology–Taiwan

Information and communications technology (ICT) systems are increasingly relevant to the maritime sector. Regarding the revolution of the bill of lading, many shipping lines and other technology startups have been looking into developing viable electronic transport documents that have the same functions as paper bills of lading to reduce supply chain risks. The limitations of the paper-based process have become increasingly visible in the COVID-19 crisis. The main purpose of the article is to analyze the application of blockchain bills of lading, which utilizes computational logic to create the digital ledger, and users can set up algorithms and rules to …

Intelligent Formation Control Using Orfbls And Adaptive Backstepping Sliding-Mode Control To Address Uncertain Tilting In Multi-Quadrotors During Wind Gusts, Ching-Chih Tsai, Chun-Fu Mao, Kumail Hussain

Journal of Marine Science and Technology–Taiwan

In terms of aerial robotics, stable and precise formation control is a significant challenge for tilting multi-quadrotors during disturbances. This paper proposes a fixed-time formation control strategy for tilting multi-quadrotors to address the effect of external wind gusts. The observer accurately predicts environmental disturbances and an adaptive backstepping sliding-mode control (ABSMC) method with an output recurrent fuzzy broad learning system (ORFBLS) addresses these disturbances within a finite time. ORFBLS dynamically adjusts its structure through a growing ORFBLS structure to allow nodes to be added as needed. The method's stability is validated using Lyapunov stability theory and ensures the convergence of …

Visually Guided Landing System On Ship Deck For Multicopter, Dong-Lin Li, Shih-Kai Lee, Tzu-Hsiang Chou

Journal of Marine Science and Technology–Taiwan

Traditionally, high-value fish have been located at sea using helicopters. However, with advancements in technology, maritime drones have become increasingly important in recent years. Compared to traditional helicopter-based methods, drones offer significantly lower operational costs, making them cost-effective. However, the challenging sea conditions, including strong winds and the swaying motion of vessels, pose significant challenges for drone landings.

This paper proposes a stable approach for multicopter landing on ships at sea, incorporating improved marker detection, enhanced wind resistance control, and more accurate deck motion prediction. In the marker detection phase, we introduce a method to improve the accuracy of ArUco …

Typology And Spatiotemporal Patterns Of Illegal Fishing Activities In The Philippines: Implications For Fisheries Management, Marlowe O. Acevedo, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

Illegal, unreported, and unregulated (IUU) fishing activity is a global threat and continues to undermine the effectiveness of fisheries regulations and management measures. However, the extent of illegal fishing in Philippine waters remains unclear. This study aims to identify the types of illegal fishing in Philippine waters and analyzed their temporal and spatial patterns. Data were obtained from the records of the Philippine Coast Guards (PCG) and Maritime Law Enforcement Agencies from 2015 to 2020. A total of 602 apprehensions were recorded, resulting in 813 violations, of which 630 cases were fishery violations. Most of the watercrafts involved in the …

A Quantitative Analysis Of Burrowing And Subterranean Locomotion In The Sand Lance Using A Transparent Sediment, Issei Fujita, Makoto Tomiyasu, Jun Yamamoto, Yasuzumi Fujimori

Journal of Marine Science and Technology–Taiwan

Sand lances (Ammodytes spp.) rely on rapid burrowing into sediment for predator avoidance. Although their sediment grain-size preferences are well documented, the biomechanics underlying burrowing success remain unclear because natural substrates are opaque. Using a transparent-sediment system, we directly visualized and quantified burrowing kinematics to: (1) test the effect of body size (total length, TL) on burrowing success; (2) examine entry mechanisms (e.g., swimming speed, entry angle); and (3) describe locomotion within sediment. Logistic regression on the full dataset (N = 28 fish) identified TL as the primary determinant of success, with larger individuals exhibiting significantly higher success …

Cruise Network Design Under Sequential Duopolistic Entry, Ta-Hui Yang, Ching-Hui Tang, Wan-Tien O

Journal of Marine Science and Technology–Taiwan

This study addresses the network design for international cruise services in a duopolistic market, where carriers enter and make decisions sequentially. The leader, who makes the first move, makes decisions as there is no competitor in the market. The follower, who makes decisions later, has to design their network considering the existing leader’s network. The leader’s model is a mixed integer linear problem while the follower’s model is a mixed integer nonlinear problem. Therefore, a heuristic is proposed to solve the problem. The commercially available general algebraic modeling system is used in conjunction with its different solvers to solve the …

Effect Of Heat Treatment On The Corrosion And Wear Behavior Of 17-4 Ph Stainless Steel For Marine Applications, Syuan Tai, I-Kon Lee, Ming-Yuan Lin, Kang-Yu Liao, Chin-Chun Chang, Hung-Bin Lee

Journal of Marine Science and Technology–Taiwan

This study explores the tribocorrosion behavior of conventionally cast 17-4 PH stainless steel under real seawater conditions, focusing on the effects of three heat treatments (Solution, H900, H1100). Electrochemical tests, tribocorrosion experiments, SEM, XPS, and quantitative analysis were used to establish a three-stage tribocorrosion mechanism. Results show that H900 exhibits superior corrosion and wear resistance, while H1100 suffers increased material loss and surface cracking at high potentials. Elemental analysis revealed NbC migration forming third-body particles, which, although briefly reducing friction, induced local stress concentration and crack initiation. The findings highlight the critical influence of microstructure, passive film stability, and third-body …

Enhancing Underwater Imagery And Organism Detection Using Reinforcement Learning, K. Arul Deepa, P. Ramya, Karpaga Vinodha, Dharmaraja C

Journal of Marine Science and Technology–Taiwan

Underwater environments pose significant challenges in assessing image quality and organism detection due to light scattering and absorption, which limits visibility and color fidelity. Existing solutions often fail to effectively address these challenges, resulting in suboptimal image quality and hindering organism identification. This paper examines the problem through a dual-focused approach: enhancing underwater images and detecting organisms using the Underwater Image Enhancement Benchmark (UIEB) dataset. The first step introduces a state-of-the-art method for image enhancement by applying reinforcement learning (RL) principles. By formulating the enhancement process as a Markov Decision Process (MDP)—where states are represented by image features and actions …

The Effect Of Chamber Geometry On The Performance Of Oscillating Water Column, Timilehin O. Osunade

College of Graduate Studies: Theses & Dissertations

This thesis investigates the effect of internal chamber geometry on the performance of a piezoelectric oscillating water column (OWC) wave energy harvester. Four acrylic chamber configurations with internal top-surface angles of 0°, 30°, 45°, and 60° were tested under 32 controlled conditions combining synchronous (SYN) and asynchronous (ASC) forcing at input voltages of 4, 6, 8, and 10 V. A 35 mm piezoelectric disc mounted at the chamber roof served as the power take-off element and, subject to the RC-limit caveat disclosed in Section 3.2.1, as a first-order dynamic analogue of the chamber pressure for phase-based compressibility analysis. All test …

Development Of An Active Heave Compensation System On A Cost Effective Microcontroller For A Fiber Optic Tether Management System, Frances Truong

Open Access Master's Theses

Fiber optic tether systems are used for real-time data transmission to remotely operated vehicles (ROV) due to their ease of deployment and light weight, but are prone to damage from tension loads. An active heave compensation system applied to a fiber optic tether system can address these challenges by actively managing the tether payout to reduce peak loads. Tether management systems with active heave compensation have been in use for larger systems such as work class vehicles and offshore oil rigs, but few are developed for small maritime systems. This work focuses on the development and incorporation of an active …

Vortex-Vortex Interaction Cavitation Inception Using Statistical And Multi-Phase Models, Nicholas Berthiaume

Open Access Master's Theses

This document is not being released in full, as it contains Controlled Unclassified Information (CUI) subject to safeguarding and dissemination controls under the policies of the National Institute for Undersea Vehicle Technology (NIUVT). Only those portions authorized for release are included herein.