Ocean Engineering Commons^™

Blade Design And Validation Of Hydrokinetic Turbine To Harvest Water Current Energy, Setare Sadeqi

LSU New Orleans Theses and Dissertations

The innovative aspect of this research lies in the careful integration of cutting-edge technologies throughout the entire process of designing, fabricating, and testing the carbon fiber propeller for the 3-bladed horizontal axis ocean current turbine (OCT). SolidWorks software played a pivotal role in the initial design phase, enabling a meticulous and precise modeling of the propeller's geometry. The utilization of SolidWorks allowed for a detailed exploration of various design parameters, ensuring that the propeller's structure and form were optimized for performance in ocean current conditions. Moving beyond the realm of virtual design, the choice of carbon fiber as the fabrication …

Investigation On The Effects Of Biofouling On The Boundary Layer, Adam N. Bacon

LSU New Orleans Theses and Dissertations

This study is an investigation of the effect of biofouling on the boundary layer of a flat plate and a NACA 4-digit series foil. Three identical hydrofoils made of resin were placed in the Gulf of Mexico at Grand Isle, Louisiana, and observed and analyzed by marine biologists at the University of New Orleans for their species composition. The resulting biofouling that grew was primarily made up of barnacles and bryozoans. The foils were submerged in an open channel flume at zero incidence and subjected to a series of experiments whose arc-length Reynolds numbers ranged from approximately 13000 to 32000. …

Towing Tank Trials Of Hydrokinetic Turbine Scale Model To Support Marine Energy System Verification, Shahab Rouhi

LSU New Orleans Theses and Dissertations

In response to the escalating demand for sustainable energy solutions and the critical reevaluation of conventional fossil fuels due to environmental concerns, this dissertation embarks on a comprehensive exploration of hydrokinetic energy as a promising alternative. The study delves into the underexplored domain of hydrokinetic energy, leveraging innovative methodologies for effective utilization and harnessing, particularly through the development and investigation of hydrokinetic turbines.

In the realm of hydrokinetic energy conversion, our research has exclusively concentrated on horizontal-axis turbines, distinct from other turbine configurations. Noteworthy is the adaptation of a conventional horizontal-axis wind turbine for water currents, revealing enhanced performance through …

Numerical Study On Oscillating Flow Over A Flat Plate Using Pseudo-Compressibility In Intermittent Turbulent Regime, Shivank Srivastava Mr.

LSU New Orleans Theses and Dissertations

A Computational Fluid Dynamic (CFD) in-house code is developed to study unsteady characteristics of incompressible oscillating boundary layer flow over a flat plate under laminar and intermittently turbulent condition using pseudo-compressible unsteady Reynolds Averaged Navier- Stokes (RANS) model. In the in-house code, the two-dimensional, unsteady conservation of mass and momentum equations are discretized using finite difference techniques which employs second order accurate (based on Taylor series) central differencing for spatial derivatives and second order Runge-Kutta accurate differencing for temporal derivatives. The in-house code employs Fully Explicit-Finite Difference technique (FEFD) to solve the governing differential equations of the mathematical model. In …

Experimental Investigation Into The Boundary Layer Of A Robotic Anguilliform Propulsor, Jonathan R. Eastridge

LSU New Orleans Theses and Dissertations

Boundary layer information local to three longitudinal positions has been characterized for a 130 cm long biomimetic self-propulsor known as NEELBOT-1.1 that swims with undulatory anguilliform-like motions, via analysis of stereo particle image velocimetry (PIV) measurements for key moments in the undulation cycle and for numerous combinations of swimming conditions and motion parameters, ideal and non-ideal. No obvious turbulent flow structures or indications of boundary layer separation were observed at nonzero advance speeds, and skin friction coefficients were subsequently estimated for magnitude relative to the dynamic pressure associated with operation at the design swimming speed of U_o = 0.25 …

Feasible Form Parameter Design Of Complex Ship Hull Form Geometry, Thomas L. Mcculloch

LSU New Orleans Theses and Dissertations

This thesis introduces a new methodology for robust form parameter design of complex hull form geometry via constraint programming, automatic differentiation, interval arithmetic, and truncated hierarchical B- splines. To date, there has been no clearly stated methodology for assuring consistency of general (equality and inequality) constraints across an entire geometric form parameter ship hull design space. In contrast, the method to be given here can be used to produce guaranteed narrowing of the design space, such that infeasible portions are eliminated. Furthermore, we can guarantee that any set of form parameters generated by our method will be self consistent. It …

Hydrodynamics Of An Anguilliform Swimming Motion Using Morison’S Equation, Naga Sasi Devarakonda

LSU New Orleans Theses and Dissertations

In this study, the hydrodynamic performance of anguilliform swimming motion is computed using Morison’s equation. This method was shown to predict the servo motor torques well. The anguilliform swimming motion is sinusoidal with increasing amplitude from head to tail. A “wakeless” swimming motion proposed by Vorus and Taravella (2011) with zero net circulation is considered.

This method is compared to the existing slender body theory and is validated with reference to the experimental results of NEELBOT-1.1 (Potts, 2015). The results for the study indicates that self-propulsion speed of the motion is independent of the oscillating tail amplitude at a constant …

Risk Assessment Of Dropped Cylindrical Objects In Offshore Operations, Adelina Steven

LSU New Orleans Theses and Dissertations

Dropped object are defined as any object that fall under its own weight from a previously static position or fell due to an applied force from equipment or a moving object. It is among the top ten causes of injuries and fatality in oil and gas industry. To solve this problem, several in-house tools and guidelines is developed over time to assess the risk of dropped objects on the sub-sea structures. This thesis focuses on compiling and comparing those methods in hope to improve the recommended practices available in the market. A simple modification is done on the in-house tools …

Motion Dynamics Of Dropped Cylindrical Objects, Gong Xiang

LSU New Orleans Theses and Dissertations

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry. Objects may be dropped during lifting or any other offshore operation. Concerns of health, safety, and the environment (HSE) as well as possible damages to structures require the prediction of where and how a dropped object moves underwater. This study of dropped objects is subdivided into three parts. In the first part, the experimental and simulated results published by Aanesland (1987) have been successfully reproduced and validated based on a two-dimensional (2D) theory for a dropped drilling pipe model. A new …

Numerical Computation Of Transient Response Of 2d Wedge Impact, Naresh Kumar Koyyapu

LSU New Orleans Theses and Dissertations

The diverse applications of advanced marine craft ascribed to their high speed and technological advancements has led to the use of stronger and lighter metals in such crafts. High speed, in effect also increases slamming loads as higher speed increases frequency of wave encounter while operating in waves. The present study is limited to wedge impact models. Fundamentally, the study is thus about two-dimensional (2D) wedge impact in water. In an attempt to predict the structural response to impact hydrodynamic force, a beam element based finite element (FE) computer program is written and the results of the code are presented …

Electromechanics Of An Ocean Current Turbine, Vasileios Tzelepis

LSU New Orleans Theses and Dissertations

The development of a numeric simulation for predicting the performance of an Ocean Current Energy Conversion System is presented in this thesis along with a control system development using a PID controller for the achievement of specified rotational velocity set-points. In the beginning, this numeric model is implemented in MATLAB/Simulink® and it is used to predict the performance of a three phase squirrel single-cage type induction motor/generator in two different cases. The first case is a small 3 meter rotor diameter, 20 kW ocean current turbine with fixed pitch blades, and the second case a 20 …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Cruise Ship Preliminary Design: The Influence Of Design Features On Profitability, Justin Epstein

LSU New Orleans Theses and Dissertations

This thesis provides a means to estimate the physical and performance characteristics of a preliminary cruise ship design. The techniques utilized to estimate these characteristics are showcased in the user-friendly interface known as the Cruise Ship Analysis Tool (CSAT). Using the CSAT, the implications that design feature decisions in the preliminary design stage have on a cruise ship’s profitability is analyzed. Then, the most profitable design feature assemblage among a finite number of varying design feature combinations is estimated and compared among cruise ship designs with different passenger carrying capacities. Profitability is analyzed using the measure of merit (MOM) known …

Reducing Vortex-Induced Vibration Of Drilling Risers With Marine Fairing, Aswin Janardhanan

LSU New Orleans Theses and Dissertations

Since the offshore drilling for oil and gas is venturing into ever greater water depths, drilling risers face problems of vortex-induced vibrations due to the currents. Vortexinduced vibrations are a major fluid load and fatigue component on the long, smooth, and slender bodies placed in a fluid flow and measures must be taken to suppress the shedding of the Karman vortex sheets from its edges. One of the ways to reduce the vibration is to use marine fairings which are attached to the drilling risers with the help of weather vanes. In this thesis, CFD analysis based on solving RANS …

A Wedge Impact Theory Used To Predict Bow Slamming Forces, Ashok Benjamin Basil Attumaly

LSU New Orleans Theses and Dissertations

The pressures and impact forces acting on a hull while experiencing bow wave slamming is analyzed using Vorus' Impact Theory. The theory extends the hydrodynamic analysis of planing hulls from simple wedges to irregular shapes using a Boundary Element Method. A Fortran-based code developed by the Author is used to analyze hullforms. Linear strip theory is used to extend the analysis over a three dimensional hull. Post-processing of output data gives hull pressure distributions at different time steps and is visually presentable.

Impact pressure, Impact force, Planing, Wave slamming, Bow impact, Vorus' theory, Boundary Element Method, Linear strip theory

Numerical Modeling Of Lifting Flows In The Presence Of A Free Surface, Leonardo R. Carmona Vasquez

LSU New Orleans Theses and Dissertations

This thesis work started as an attempt to create a computational tool to model hydrodynamics problems involving lifting flows. The method employed to solve the problem is potential flow theory.

Despite the fast evolution of computers and the latest developments in Navier-Stokes solvers, such as the Ranse methods; potential flow theory offers the possibility to create or use existing computational tools, which allow us modeling hydrodynamics problems in a simpler manner. Navier-Stokes solver can be very expensive from the computational point of view, and require a high level of expertise in order to achieve reliable models.

Based on the above, …

Correlation Of Shear Strength Between Longitudial And Transverse Specimens, Erasto A. Fernandez

LSU New Orleans Theses and Dissertations

In this thesis, new methods for shear strength are proposed and backed up through extensive experimentation, ABAQUS models and data analysis of Titanium welds of three different alloys. The results are compared with those obtained by using the procedure outlined by AWS B4 for calculating Shear Strength in the transverse and longitudinal directions; this equation is widely used by the American Welding Society (AWS) and all those in search of more efficient designs involving welding.

It is a well-documented issue that the equation provided by AWS yields a large discrepancy between the values for shear strength of longitudinal and transverse …