Ocean Engineering Commons^™

Extending Low-Frequency Traveling-Wave Propagation In A Water-Filled Cylindrical Waveguide Using Active Impedance Control, William Slater

Open Access Dissertations

This dissertation investigates extending the frequency range over which a one-dimensional, plane traveling wave can be generated in a water-filled, steel-walled waveguide under ocean temperature and hydrostatic pressure conditions. The wave guide considered is a thick-walled, steel cylinder filled with a water/glycol mixture with a transducer at each end and a hydrophone array along the length. One transducer excites a plane wave while the other cancels reflections, resulting in a traveling wave in the waveguide. The current (open-loop) measurement system is advertised to generate traveling waves for low frequencies where only 3.4% of a wavelength can be measured (kL …

Knowledge Integrated Deep Learning For Enhanced Fault Diagnosis And Prognosis For Rotating Machinery And Its Applications On Marine Systems, Yunsheng Su

Dissertations, Master's Theses and Master's Reports

This dissertation develops a knowledge-informed deep learning framework for robust fault diagnosis and prognosis across various engineered systems, including bearings, lithium-ion batteries, and mooring systems in wave energy converters (WECs). A deep transfer learning (DTL) method is first developed to improve bearing fault diagnosis by fusing data from multiple sources and extracting key features using convolutional neural networks (CNNs). Building upon this, a knowledge-informed deep network (KIDN) framework is proposed, integrating physics-based features with deep learning to enhance diagnostic accuracy and generalizability. A constrained Gaussian process (CGP) model is further employed to guide adaptive network design and reduce model tuning …

Reverse Geometric Dispersion In The Beaufort Sea: Dissecting Sound Propagation At Long Ranges In Ducted Profiles, Jessica Desrochers

Open Access Dissertations

Acoustic propagation in the Arctic is evolving as surface temperatures increase and ice melts, resulting in a changing sound propagation environment. This study investigates the acoustic arrival structure in the Canada Basin and its connection to the underlying sound speed profiles. Two Seagliders were deployed in the summer of 2016 and 2017, diving in a sawtooth pattern collecting conductivity, temperature, and depth (CTD) data as part of the Canada Basin Acoustic Glider Experiment (CABAGE). These data are used to calculate sound speed profiles used to predict and understand acoustic arrival structures.

The warming of the Pacific Summer Water and surface …

Design And Implementation Of An Inverted Short Baseline Acoustic Positioning System, Jakob Frabosilio

Master's Theses

This document details the design, implementation, testing, and analysis of an inverted short baseline acoustic positioning system. The system presented here is an above-water, air-based prototype for an underwater acoustic positioning system; it is designed to determine the position of remotely-operated underwater vehicles (ROVs) and autonomous underwater vehicles (AUVs) in the global frame using a method that does not drift over time.

A ground-truth positioning system is constructed using a stacked hexapod platform actuator, which mimics the motion of an AUV and provides the true position of an ultrasonic microphone array. An ultrasonic transmitter sends a pulse of sound towards …

The Pressure Distribution Of Rotating Cylinders Using An Onboard Wireless Data Acquisition System, Nathan Eller

Master's Theses

This thesis presents a novel, cost-effective method for mapping the pressure distribution on a rotating cylinder in cross flow, a phenomenon central to the Magnus effect. Utilizing commercial-off-the-shelf (COTS) micro-electromechanical system (MEMS) pressure sensors, a high-resolution data acquisition system was developed and integrated into a rotating cylinder model. Compared to traditional approaches, such as slip rings or one-off designs, this method proved significantly cheaper and faster while achieving comparable or superior resolution. The experimental setup, including a modified continuous rotation technique and adaptable model design, facilitated rapid testing across a broad range of Reynolds numbers and reduced frequencies, exceeding the …

Nonlinear Hydrodynamic Modeling And Control Of Wave Energy Converters, Tania Demonte Gonzalez

Dissertations, Master's Theses and Master's Reports

The growing urgency to transition towards carbon-neutral energy sources has sparked significant interest in diversifying energy portfolios by incorporating renewable energies, including the untapped potential of wave energy. This dissertation sets its objectives in advancing wave energy converter (WEC) technologies by focusing on developing and validating a nonlinear modeling technique and designing control strategies to maximize energy extraction and enhance WEC efficiency. At the heart of this research is the derivation and validation of an algebraic nonlinear Froude-Krylov forces model. Building on this foundational model, a robust nonlinear sliding mode controller and a nonlinear model predictive controller are designed to …

Design, Testing And Neural Network Modeling Of A Low-Friction Wave Energy Converter Testbed, Vasu Bhardwaj

Dissertations, Master's Theses and Master's Reports

Point absorber wave energy converters (WECs) transform water wave kinetic energy into other useful forms, typically electrical. While it’s possible to extract energy from passive WECs, more energy can be captured using active control where its power take-off (PTO) acts as both a generator and an actuator. Control strategies usually require accurate models often obtained during model-scale testing. Unfortunately, friction can dominate the dynamic response in small WEC models. A frictionless point absorber WEC testbed is described in this report which allows the researcher to focus on fundamental hydrodynamic behavior instead of friction. It uses air bearings for vertical motion …

Wave Energy Converter Wave Force Prediction Using A Neural Network, Morgan Kline

Dissertations, Master's Theses and Master's Reports

Due to the unpredictable nature of large bodies of water, wave energy can be a difficult renewable resource to rely on. One way to make Wave Energy Converters (WECs) more efficient is to apply a control strategy. In many control solutions, it is assumed that the wave excitation force is known into the future. In many instances, especially with complex waveforms, this is simply not the case. Simulation studies have shown the promise of wave force prediction using neural networks. This study demonstrates this experimentally and aims to characterize the important factors when designing such a network. Several wave elevation …

Physics-Based Machine Learning Methods For Control And Sensing In Fish-Like Robots, Colin Rodwell

All Dissertations

Underwater robots are important for the construction and maintenance of underwater infrastructure, underwater resource extraction, and defense. However, they currently fall far behind biological swimmers such as fish in agility, efficiency, and sensing capabilities. As a result, mimicking the capabilities of biological swimmers has become an area of significant research interest. In this work, we focus specifically on improving the control and sensing capabilities of fish-like robots.

Our control work focuses on using the Chaplygin sleigh, a two-dimensional nonholonomic system which has been used to model fish-like swimming, as part of a curriculum to train a reinforcement learning agent to …

Ballasting System For An Autonomous Underwater Vehicle, Noura Rayes, Bahram Nassersharif, Zach Champney, Kyle Alessandro, Jason Mirandou

Senior Honors Projects

NOURA RAYES (Mechanical Engineering); Ballasting System for an Autonomous Underwater Vehicle Sponsor: Bahram Nassersharif (Mechanical Engineering)

Over the last year, our Mechanical Engineering Capstone team, Nautilus, has been working to design a ballasting system for various Autonomous Underwater Vehicles (AUVs) sponsored by Raytheon Technologies. Common AUV systems are used for a wide range of applications from environmental monitoring, oceanic exploration, to data collection. AUVs also have many technical advantages that make underwater tasks more efficient, cost-effective, and generally safer. Raytheon Technology, specifically, is looking to improve their existing ballasting mechanism for their AUVs to use for military defense. For this …

Development And Validation Of A Force Measuring Device For A Laboratory Wave Tank, Jacob K. Colling

Dissertations, Master's Theses and Master's Reports

The ability to predict the hydrodynamic force exerted on floating bodies plays a critical role in creating more effective control strategies for wave energy converters (WECs). Developing a test apparatus capable of directly measuring the forces exerted on a floating body subjected to a wavefield provides the means to validate theoretical prediction methods with experimental results and to develop data-based prediction methods for hydrodynamic forces. This report will discuss the development and validation of a device that measures the total vertical force exerted on a test artifact. The device requirements and design are discussed to examine the factors taken into …

Sliding Mode Control Of A Nonlinear Wave Energy Converter Model, Tania Demonte Gonzalez

Dissertations, Master's Theses and Master's Reports

The most accurate wave energy converter models for heaving point absorbers include nonlinearities, which increase as resonance is achieved to maximize energy capture. The efficiency of wave energy converters can be enhanced by employing a control scheme that accounts for these nonlinearities. This project proposes a sliding mode control for a heaving point absorber that includes the nonlinear effects of the Froude-Krylov force. The sliding mode controller tracks a reference velocity that matches the phase of the excitation force to ensure higher energy absorption. This control algorithm is tested in regular linear waves and is compared to a complex-conjugate control …

Closed Loop Energy Maximizing Control Of A Wave Energy Converter Using An Estimated Linear Model That Approximates The Nonlinear Froude-Krylov Force, Yaqzan Mohd Yaqzan

Dissertations, Master's Theses and Master's Reports

Wave energy converters (WECs) exploit ocean wave energy and convert it into useful forms such as electricity. But for WECs to be successful on a large scale, two primary conditions need to be satisfied. The energy generated must satisfy the network requirements, and second, energy flow from waves to the grid needs to be maximized. In this dissertation, we address the second problem. Most control techniques for WECs today use the Cummins' linear model to simulate WEC hydrodynamics. However, it has been shown that under the application of a control force, where WEC motions are amplified, the linear model diverges …

Development Of A Fused Deposition 3d Printed Buoy And Method For Quantifying Wave Tank Reflections, Samantha G. Swartzmiller

Dissertations, Master's Theses and Master's Reports

Testing model scale prototypes is integral to the development of wave energy converter (WEC) technology. Model scale WECs are tested in wave tanks where they are subjected to repeatable wave fields. Their presence in water creates radiated waves that eventually reflect off tank walls disrupting the intended wave field. Fabrication of model scale WECs is another developing aspect of tank testing. Often model WECs are built of foam. Additive manufacturing is a promising alternative although the most common method, fused deposition modeling (FDM) 3D printing, does not typically produce waterproof parts. The goals of this work were 1) develop a …

Optimization And Control Of An Array Of Wave Energy Converters, Jianyang Lyu

Dissertations, Master's Theses and Master's Reports

This study explored optimal configuration of both the array layout and the dimension of each WEC in the array. The array contains heaving buoys with full interaction and exact hydrodynamics. Optimization of dimension was done on each WEC in the array with a given optimal layout, and a higher q-factor was achieved. Both impedance matching optimal control and derivative control were employed, which provides both theoretical maximum energy and a more realistic case. Then the work was expanded to optimization of both the array layout and the dimension of each WEC in the array. An average of 39.21% higher q-factor …

Multi-Modal And Short-Range Transmission Loss In Ice-Covered, Near-Shore Arctic Waters, Miles B. Penhale

Dissertations, Master's Theses and Master's Reports

In the past century, extensive research has been done regarding the sound propagation in arctic ice sheets. The majority of this research has focused on low frequency propagation over long distances. One of the most commonly used excitation methods for air-ice-water layers has been explosives. However, environmental regulation has become more stringent, disallowing the use of almost all explosive excitation types. Due to changing climate conditions in these environments, new experimentation is warranted to determine sound propagation characteristics in, through, and under thin ice sheets, in shallow water, over short distances. In April, 2016 several experiments were conducted approximately 2 …

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

LSU New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …