Manufacturing Commons^™

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Survey Data On Energy And Fuel Use Of Firms In Economic Zones In The Philippines, Majah-Leah V. Ravago, Raul V. Fabella, Karl Robert L. Jandoc, Renzi G. Frias, J. Kathleen P. Magadia

Economics Department Faculty Publications

The data describe characteristics, operations, utilities, and fuels used in the production of 115 manufacturing and agro-industrial firms in Philippine special economic zones. The data include information on the firm's production, sales, and schedules; electricity sources, requirements, and uses; the importance of various conventional fuels, and the firms’ fuel expenditure in their major production processes. The data also include their employee's aptitude, knowledge, considerations, and opinions on alternative fuels and primary energies, and experiences in using them. The data were gathered through a series of focus group discussions (FGDs) in June 2019 and an online survey conducted in August to …

Manufacturing: The Qualitative Study Of A Transition To A Green Facility, Brandon David Staves

Masters Theses & Specialist Projects

This qualitative study focused on answering three core questions: How have facilities reduce pollutions in regards to the quality of air, water, land, light and noise? Which Types of pollution reduction projects are more or less successful to implement? What types of pollution are facilities focusing on and why? The results of the 15 companies surveyed show a variety of projects that facilities have used to reduce pollution, it also shows that cost is a major factor in the unsuccessful projects, and that facilities are actively focused on reducing Air, Land, and Water pollution. While the data shows a variety …

Creation Of A Cip Method For The Heat Exchangers At Rolls-Royce, Melanie Howe, Austin Williams, Caroline Dempsey, Bethany Fralick

Journal of the South Carolina Academy of Science

Rolls-Royce produces various engines which must be tested prior to their distribution to ensure a high-quality product. The manufacturing plant contains four test cells where the engines can be subjected to high levels of torque and extreme temperatures. A heat exchanger is necessary in this testing system and over time, unwanted waste accumulates on the system’s plates. The team is tasked with developing and implementing a system mounted on a mobile cart which can provide data to determine whether the plates need to be cleaned. For this cleaning system to work, it must fully saturate the heat exchanger in cleaning …

An Economical Method For Securely Disintegrating Solid-State Drives Using Blenders, Brandon J. Hopkins Phd, Kevin A. Riggle

Journal of Digital Forensics, Security and Law

Pulverizing solid-state drives (SSDs) down to particles no larger than 2 mm is required by the United States National Security Agency (NSA) to ensure the highest level of data security, but commercial disintegrators that achieve this standard are large, heavy, costly, and often difficult to access globally. Here, we present a portable, inexpensive, and accessible method of pulverizing SSDs using a household blender and other readily available materials. We verify this approach by pulverizing SSDs with a variety of household blenders for fixed periods of time and sieve the resulting powder to ensure appropriate particle size. Among the 6 household …

Reshaping The Landscape Of The Future: Software-Defined Manufacturing, Lei Xu, Lin Chen, Zhimin Gao, Hiram Moya, Weidong Shi

Computer Science Faculty Publications and Presentations

We describe the concept of software-defined manufacturing, which divides the manufacturing ecosystem into software definition and physical manufacturing layers. Software-defined manufacturing allows better resource sharing and collaboration, and it has the potential to transform the existing manufacturing sector.

Rattle Detection – An Automotive Case Study, Orla Hartley

International Conference on Lean Six Sigma

This case study showcases the use of statistical tools to develop an objective Squeak and Rattle (S&R) measurement and detection test for End Of Line (EOL) sign off in an automotive manufacturing environment. Audio Induced S&R is an unwanted vibration within the vehicle caused by the sound system, impacting on customer perception of vehicle quality. Testing for S&R in an automotive environment has a key challenge; how to robustly detect a rattle at the EOL and thus prevent plant escapes to the customer. The objective test developed used microphones and analysers in order to replace an e subjective listening test. …

Real-Time Monitoring Of Fdm 3d Printer For Fault Detection Using Machine Learning: A Bibliometric Study, Vaibhav Kisan Kadam, Satish Kumar, Arunkumar Bongale

Library Philosophy and Practice (e-journal)

Additive Manufacturing has wide application range including healthcare, Fashion, Manufacturing, Prototypes, Tooling etc. AM techniques are subjected to various defects that may be printing defects or anomalies in machine. There is gap between current AM techniques and smart manufacturing since current AM lacks in build sensors necessary for process monitoring and fault detection. Both of these issues can be solved by incorporating real-time monitoring into AM. So the study is carried out to identify recent work done in AM to improve current system. For this bibliometric study Scopus database is used, study is kept limited to year 2010-2021 and English …

Advancing The Use Of Quality Control Tools For High-Density Data In Modern Manufacturing, Romina Dastoorian

Dissertations

In modern manufacturing, advanced metrology systems are continually being incorporated into quality control (QC) systems to provide high-density (HD) datasets. These datasets can contain millions of measurements that can be used to represent a part’s whole geometry. While integrating HD datasets into QC systems has brought several opportunities to enhance the performance of QC systems, it has resulted in new challenges in this area as well. While significant amounts of research have been performed in this area, the QC research community still strives to tackle these challenges. This study identifies key challenges regarding incorporating HD datasets into QC systems. Specifically, …

Parametric Design Of Flywheel For An Electric Punch Press, Prashant Dhakal

Honors Theses

Almost all designs start with a design requirement. These may be weight, volume, clearance, and even custom calculations. Finding a solution that meets these requirements often involves tedious and time-consuming iterations. Once the solution has been found, the design must be optimized to find the best possible solution. Finding the ‘best possible design’ requires substantial time and effort dedicated to iterating and analyzing the potential model solutions. This is where Parametric design comes into play. The Parametric design aids in specifying the key parameters of the design and makes changes interactively, with the model updating automatically. The purpose of this …

Statistical Study Of The Effect Of Implementing An Airveyor System On The Warpage Of Injection Molded Closures, Charles Wesley Bozarth

Masters Theses & Specialist Projects

Berry Global in Bowling Green, Kentucky produces predominantly polypropylene container closures. One variant, the 83mm lined jar closure, is produced by first being injection molded, placed in work-in-progress (WIP) hold for 24 hours to cool, and then finished through the auxiliary liner operation into a final product. While this process is an effective method to produce a quality large-diameter closure and allows the polypropylene adequate time to cool without warping out of shape, the 24-hour WIP time and the manpower needed to accomplish this can negatively impact several business metrics as well as employee safety.

The purpose of this thesis …

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …

Generic Design Methodology For Smart Manufacturing Systems From A Practical Perspective, Part I—Digital Triad Concept And Its Application As A System Reference Model, Zhuming Bi, Wen-Jun Zhang, Chong Wu, Chaomin Luo, Lida Xu

Information Technology & Decision Sciences Faculty Publications

Rapidly developed information technologies (IT) have continuously empowered manufacturing systems and accelerated the evolution of manufacturing system paradigms, and smart manufacturing (SM) has become one of the most promising paradigms. The study of SM has attracted a great deal of attention for researchers in academia and practitioners in industry. However, an obvious fact is that people with different backgrounds have different expectations for SM, and this has led to high diversity, ambiguity, and inconsistency in terms of definitions, reference models, performance matrices, and system design methodologies. It has been found that the state of the art SM research is limited …

Sustainability Assessment Of Direct Energy Deposition (Ded) Based Hybrid Manufacturing Using Life Cycle Assessment (Lca) Method, Faujia Islam

Graduate Theses, Dissertations, and Problem Reports

As sustainability has emerged as a highlight for almost every field over the last few decades, the manufacturing field is no exception. Generally, additive manufacturing performs better than traditional manufacturing in terms of sustainability because of its lean energy- and material usage. Previous studies have compared the sustainability performance between traditional and additive manufacturing, but hybrid manufacturing was not focused upon much. In this paper, the life cycle assessment method is used to analyze and compare the energy consumption and environmental impact of direct energy deposition (DED) based hybrid manufacturing and traditional manufacturing “CNC milling” process for a turbine blade. …

Predictive Maintenance Of Bearing Machinery Using Simulation- A Bibliometric Study, Karan Gulati Mr., Keshav Basandrai Mr., Shubham Tiwari Mr., Pooja Kamat Prof., Satish Kumar Dr.

Library Philosophy and Practice (e-journal)

Modelling is a way of constructing a virtual representation of software and hardware that involves a real-world device. We will discover the behaviour of the system if the software elements of this model are guided by mathematical relationships. For testing conditions that may be difficult to replicate with hardware prototypes alone, modelling and simulation are particularly useful, especially in the early phase of the design process when hardware might not be available. Model-based approach in MATLAB-Simulink can be useful for predictive maintenance of machines as it can reduce unplanned downtimes and maintenance costs when industrial equipment breaks. Through this bibliometric …