Manufacturing Commons^™

Implementation Of A Production Planning And Control System In A Small Manufacturing Company, Carmelo Pernice

Theses

This thesis analyzed and discussed the implementation of a production control system in a small manufacturing firm. The basic concepts of production control were provided to give insight on the methodologies typically applied in production control systems. Overviews were presented on Material Resource Planning, Capacity Planning, and Shop Floor Control, as well as any supporting methodologies and technologies.

As with any project, some investigation was done in order to choose a system which best suits the company's needs. At Teledyne Adams, The DCD Shop Floor Control System was chosen since it is capable of handling batch manufacturing as well as …

Interfacing Plasticating Extruders With Personal Computers For Data Acquisition, Information Analysis And Retrieval Purposes, Gautamkumar Y. Shah

Theses

The current manufacturing industries are influenced more and more by computers and automation. Two of the major areas of computer uses are data acquisition and interfacing, both lead towards automation.

The intent of this thesis is to focus on the area of interfacing personal computers with plasticating extruders for information retrieval and storage. The requirements for software and hardware are discussed. Analysis of the stored information can be used to improve the quality of the final product. Implications of the stored parameters on the final product are also discussed. A sample program to store and retrieve the important parameters is …

Development Of Techniques Of Artificial Intelligence In Identifying The Different Machined Surfaces, Yi-Ching Chou

Theses

This thesis deals with the identification of different machined surfaces with artificial inteligence techniques. There are five kinds of machining operations: grinding, turning, milling, EDM and waterjet which determine the characteristics of resulting surfaces. Topology of various specimens is measured using the surfanylizer. Twenty one parameters are extracted from the measurements to describe the characteristics. In this thesis, we develop neural and expert systems that recoginize and classify surfaces according to the machining methods.

Information Handling System With A Personal Computer To Assist In The Manufacturing Of Plastic Parts, Yi Chung

Theses

The ongoing personal computer development has led to its increasing application in manufacturing to improve productivity. Being more aware of this technology, most of these benefits have accrued to large firms. The intent of this thesis is to show that it is equally advantageous for small manufacturing companies to utilize them and show how they can do so.

The field of production control systems is discussed and those areas where personal computers can be applied are emphasized. Forecasting, warehouse management, material requirement planning, and inventory control are the most appropriate. An application example using dBase III plus to write the …

Some Aspects Of Integration Of Classification, Computer Aided Design, Process Planning, And Scheduling Of Flexible Manufacturing Systems, Suresh Godavari

Theses

This work deals with the role, problems and solution technique for integration of Computer Assisted Design, Classification, Process Planning, and Scheduling for a Flexible Manufacturing System. A lark spectrum of rotational and prismatic parts are considered.

A Knowledge-based rough classification and coding system [C&C] has been developed for coding similar parts using a Group Technology [GT] technique. In this module VP-EXPERT and DBase III Plus are used as expert system and database respectively. This module interfaces with a database for the retrieval and selection process.

The code obtained from the C&C system is the basis for the succeeding phases. The …

A Study Of Machining Parameters To Optimize Surface Finish In Metal Cutting Through Cnc, S. Waseem H. Zaidi

Theses

The purpose of this thesis is to find the relationship between surface finish and machining parameters. A series of experiments have been performed at shop floor of NJIT, on MAZAK(CNC turning center), using two different cutting tool materials(high speed steel and cemented carbide) and a workpiece of Aluminium. The results have been then evaluated and analyzed to see the effects of various combinations of cutting conditions, that is, feed, speed, and depth of cut. Recommendations have been made on the basis of analysis to estimate the minimum and maximum values of surface roughness with respect to the cutting conditions for …

Improving The Throughput Of Plasticating Extruders : Measurement Of The Interparticulate Friction Coefficient For Polymeric Particulates With Circular And Profiled Cross Sections, Aiping Chen

Theses

This thesis deals with the coefficient of friction between individual polymeric pellets, the interparticulate friction coefficient (IPFC). It has been measured using a shear cell for a wide variety of circular and profiled cross?section pellets for a variery of polymeric materials. First, the thesis explains the reasons why it is desirable to enhance the IPFC based on the melting mechanisms in a single screw plasticating extruder. By making pellets with profiled cross?section pellets, the IPFC is greater than for pellets of circular cross?section. Second, it describes the test apparatus for measuring the IPFC and the method for calculating the IPFC. …

Statistical Process Control For High Precision Deep Drawn Sheet Metal Parts, Sunil S. Shah

Theses

In today's world, industrial expertise has come to be judged in terms of the quality of the product. Good quality has become the ultimate aim in a manufacturing environment, which leads to many innovations for ease in the inspection of parts. In considering a metal working company like Hudson Tool & Die Company, a study of the various operations and the application of Statistical Process Control to the forming operations is performed using STORM software. Important characteristics have been carefully studied with regards to metal forming like uniform metal thickness, radius of the bend, depth of the drawing operation. In-depth …

Effective Use Of Management Information Systems In Manufacturing, Bhavik Shah

Theses

Information is the catalyst of management and the ingredient that coalesces the managerial functions of planning, organizing, actuating and controlling. The implementation of management information system (MIS) provides the vehicle by which management process can be administered and integrated. Information is at the core of creative thinking, which leads to new ways of improving products, process and services to the invention of new devices and to discovery of new marketable concepts. Thus information for an organization has a dual application for internal operation and external marketing potential.

The organization studied was a small to medium sized batch manufacturer of healthcare …

Effect Of Center Of Gravity Location On Optimum Performance Of Random Vibratory Vehicle Suspension, Daniel Mahar

Theses

This study provides the analysis for the optimal design of a conventional vehicle suspension system, consisting of a sprung mass (vehicle body) and two unsprung masses (wheel frame), accentuated by the implementation of a damped absorber to the unsprung masses. Further, the effect of the c.g. (center of gravity) location of the vehicle body is investigated. A two dimensional, four degrees of freedom linear model is chosen. Randomly profiled terrain is assumed to impart hyperbolically distributed stationary vertical random displacements to the front and rear wheels. For generalization, nondimensional design parameters are selected. Criteria for optimization include the tire-terrain normal …

Analysis Of Compliant Pins Subjected To Plastic Deformation, Lincoln Miller

Theses

An experimental/numerical analysis of two types of compliant pins is presented: dynamic retention pins and cantilever pins. It is shown that there is a trade-off between the performances of both types of pins. For the same range of retention force, the cantilever pin, with a smaller stiffness, is more forgiving and gives a broader range of deflection. The dynamic retention pin is shown to be more reliable with time and replacement frequency, since it exhibits less plastic deformation for the same range of retention force.