Manufacturing Commons^™

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

Framework For Development Environment Selection In Digital Twin Applications, Carlos Dodero Fernandez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Digital Twin (DT) technology, a cornerstone of Industry 4.0, facilitates real-time synchronization between virtual models and physical manufacturing systems, enhancing operational efficiency and decision-making. However, its widespread adoption is hindered by the absence of standardized methods for selecting Development Environments (DEs) for DTs, compounded by challenges in cost, interoperability, and connectivity with Industrial Internet of Things (IIoT) protocols. This thesis proposes a Systematic Selection Framework to address this gap, offering a structured methodology to evaluate DEs based-on visualization quality, scalability, interoperability, and cost-effectiveness for manufacturing applications. The framework categorizes and compares sixteen DEs into Game Engines, Robotics Engines, and Simulation …

Molecular Dynamics-Based Two-Dimensional Simulation Of Powder Bed Additive Manufacturing Process For Unimodal And Bimodal Systems, Yeasir Mohammad Akib, Ehsan Marzbanrad, Farid Ahmed

Manufacturing & Industrial Engineering Faculty Publications

The trend of adapting powder bed fusion (PBF) for product manufacturing continues to grow as this process is highly capable of producing functional 3D components with micro-scale precision. The powder bed’s properties (e.g., powder packing, material properties, flowability, etc.) and thermal energy deposition heavily influence the build quality in the PBF process. The packing density in the powder bed dictates the bulk powder behavior and in-process performance and, therefore, significantly impacts the mechanical and physical properties of the printed components. Numerical modeling of the powder bed process helps to understand the powder spreading process and predict experimental outcomes. A two-dimensional …

Data-Driven Roughness Estimation Of Additively Manufactured Samples Using Build Angles, Jose Galarza, Jose Barron Jr., Farid Ahmed, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Achieving control of Laser Powder Bed Fusion (L-PBF) over the quality of the print is the main motivation for finding an optimum set of parameters in the process. Surface roughness is one of the characteristics of the print that impacts the performance of the desired functionality. This research focus is to relate the build angle with the surface roughness on the L-PBF printed specimens and utilize machine learning methods for roughness estimation of geometric features with varying build angles. The EOS M290 L-PBF printer was used to print Inconel-718 coupons using standard process parameters while varying build angles from 20 …

Prediction Of Tool Wear And Surface Finish Using Anfis Modelling During Turning Of Carbon Fiber Reinforced Plastic (Cfrp) Composites, Anil K. Srivastava, Md. Mofakkirul Islam

Manufacturing & Industrial Engineering Faculty Publications

Carbon fiber-reinforced plastics (CFRP) are widely used in various industries due to their high strength to weight ratio, corrosion resistance, durability, and excellent thermo-mechanical properties. The machining of CFRP composites has always been a challenge for the manufacturers. In this study, CNC turning operation with coated carbide tool is used to machine a specific CFRP and the relationship between the cutting parameters (Speed, Feed, Depth of Cut) and response parameters (Vibration, Surface Finish, Cutting Force and Tool Wear) are investigated. An adaptive-network-based fuzzy inference system (ANFIS) model with two multi-input–single-output (MISO) system has been developed to predict the tool wear …

Enhancing Resilience In Complex Energy Systems Through Real-Time Anomaly Detection: A Systematic Literature Review, Ali Aghazadeh Ardebili, Oussama Hasidi, Ahmed Bendaouia, Adem Khalil, Sabri Khalil, Dalila Luceri, El Hassan Abdelwahed, Sara Qassimi, Antonio Ficarella

Manufacturing & Industrial Engineering Faculty Publications

As real-time data sources expand, the need for detecting anomalies in streaming data becomes increasingly critical for cutting edge data-driven applications. Real-time anomaly detection faces various challenges, requiring automated systems that adapt continuously to evolving data patterns due to the impracticality of human intervention. This study focuses on energy systems (ES), critical infrastructures vulnerable to disruptions from natural disasters, cyber attacks, equipment failures, or human errors, leading to power outages, financial losses, and risks to other sectors. Early anomaly detection ensures energy supply continuity, minimizing disruption impacts, an enhancing system resilience against cyber threats. A systematic literature review (SLR) is …

Gaze Tracking Embedded Collaborative Robots For Automated Metrology And Reverse Engineering, Sachithra H. Karunathilake, Md Shahriar Forhad, Zhaohui Geng

Manufacturing & Industrial Engineering Faculty Publications

Conventional geometric metrology, or three-dimensional (3D) scanning, and reverse engineering heavily rely on the experience of the operators. With an increasing need for automation, robot arms have been adopted for this task. However, due to the large variety of parts and designs, automated path planning could provide a scanning solution that may overlook the critical area, which could potentially deteriorate the scan results. This article explores the integration of collaborative robotics (cobots) with eye-tracking technology to improve the autonomous 3D scanning process. The primary objective of this study is to enhance the accuracy and efficiency of cobots in 3D scanning, …

A Survey On Fused Filament Fabrication To Produce Functionally Gradient Materials, Arup Dey, Monsuru Ramoni, Nita Yodo

Manufacturing & Industrial Engineering Faculty Publications

Fused filament fabrication (FFF) is a key extrusion-based additive manufacturing (AM) process for fabricating components from polymers and their composites. Functionally gradient materials (FGMs) exhibit spatially varying properties by modulating chemical compositions, microstructures, and design attributes, offering enhanced performance over homogeneous materials and conventional composites. These materials are pivotal in aerospace, automotive, and medical applications, where the optimization of weight, cost, and functional properties is critical. Conventional FGM manufacturing techniques are hindered by complexity, high costs, and limited precision. AM, particularly FFF, presents a promising alternative for FGM production, though its application is predominantly confined to research settings. This paper …

Spectral Behavior Of Fiber Bragg Gratings During Embedding In 3d-Printed Metal Tensile Coupons And Cyclic Loading, Farid Ahmed, Md Shahriar Forhad, Mahmudul Hasan Porag

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) enables the spatially configurable 3D integration of sensors in metal components to realize smart materials and structures. Outstanding sensing capabilities and size compatibility have made fiber optic sensors excellent candidates for integration in AM components. In this study, fiber Bragg grating (FBG) sensors were embedded in Inconel 718 tensile coupons printed using laser powder bed fusion AM. On-axis (fiber runs through the coupon’s center of axis) and off-axis (fiber is at 5° and 10° to the coupon’s center of axis) sensors were buried in epoxy resin inside narrow channels that run through the coupons. FBGs’ spectral evolutions …

Comparing Life-Cycle Dynamics Of Li-Ion Batteries (Libs) Clustered By Operating Conditions With Sindy, Kristen L. Hallas, Md Shahriar Forhad, Tamer Oraby, Benjamin Peters, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Lithium-ion batteries (LIBs) play a big part in the vision of a net-zero emission economy, yet it is commonly reported that only a small percentage of LIBs are recycled worldwide. An outstanding barrier to making recycling LIBs economical throughout the supply chain pertains to the uncertainty surrounding their remaining useful life (RUL). How do operating conditions impact initial useful life of the battery? We applied sparse identification of nonlinear dynamics method (SINDy) to understand the life-cycle dynamics of LIBs with respect to sensor data observed for current, voltage, internal resistance and temperature. A dataset of 124 commercial lithium iron phosphate/graphite …

Using Sustainable Technique To Recycle Waste Paper In Academic Institutions, Mustafa M. Mansour

Al-Bahir

It has been clearly demonstrated that it would be feasible to consider recycling paper in an academic institution. This can be achieved through combining specific waste paper baskets, a pulping machine and power supplied by a renewable energy source, with an already established local paper making company. The paper making company would be able to gain a subsidy from the government which pays them to actually recycle paper, to counteract the cost of the pulped paper which is 30% more expensive than raw wood pulp. The academic institution would save money on waste disposal and decrease its carbon footprint by …

Smart Manufacturing For Cal Poly's Ime Curriculum, Grace L. Guarraia, Eric F. Ledesma

Industrial and Manufacturing Engineering

California Polytechnic State University, San Luis Obispo (Cal Poly) takes pride of supporting one of the nation’s strongest undergraduate Industrial and Manufacturing Engineering programs. However, as industry evolves to accommodate advancing computing power, improved manufacturing algorithms, and improved robotics, it is imperative that Cal Poly’s curriculum evolves in parallel. Smart manufacturing is the future of the manufacturing industry, and Cal Poly is searching for the ideal method to teach and integrate Smart Manufacturing into its classes. With its upcoming switch to the semester system, coupled with its “Learn by Doing” motto, the department is at an ideal period for the …

Barcode Medication Administration (Bmca): 2023-24, Krishan R. Patel, Carlos E. Sosa, Mary Grace Sy

Industrial and Manufacturing Engineering

The Barcode Medication Administration is an important system implemented within a hospital. It is the process in which nurses and other healthcare professionals prescribe and distribute medication to the patients. It aids in organizing which patient got prescribed which medication from which doctor and provides records on who was given care by who. The whole BCMA system is a multi-step process from getting the medication prescribed, to the nurses having to pick up the medication from the medication cabinet, and then having to scan the patient and the medication to finally administer medications.

The current BCMA system implemented at the …

Advanced Spatio-Temporal Froth Analysis Using Smart Soft Sensors In Mineral Processing, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Oumkeltoum Amar, Mohamed Chekroun, Oussama Hasidi, Oussama Lachihab

Manufacturing & Industrial Engineering Faculty Publications

In the transformative field of mineral processing, the need for innovative technologies to overcome inherent difficulties and a critical shortage of high-quality data is an acute challenge. This study addresses these pressing issues by leveraging advanced spatio-temporal deep learning techniques, specifically Convolutional Long Short-Term Memory (ConvLSTM). Focused on the Zinc flotation circuit at CMG Managem Group in Morocco, our comprehensive approach encompasses meticulous data collection from a real-world industrial setting, rigorous spatial and temporal analyses, practical and accurate data augmentation, and the development of a ConvLSTM model for precise prediction of mineral grades. By capturing the temporal intricacies of froth …

Hybrid Features Extraction For The Online Mineral Grades Determination In The Flotation Froth Using Deep Learning, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Abderrahmane Benhayoun, Oumkeltoum Amar, François Bourzeix, Karim Baïna, Mouhamed Cherkaoui, Oussama Hasidi

Manufacturing & Industrial Engineering Faculty Publications

The control of the froth flotation process in the mineral industry is a challenging task due to its multiple impacting parameters. Accurate and convenient examination of the concentrate grade is a crucial step in realizing effective and real-time control of the flotation process. The goal of this study is to employ image processing techniques and CNN-based features extraction combined with machine learning and deep learning to predict the elemental composition of minerals in the flotation froth. A real world dataset has been collected and preprocessed from a differential flotation circuit at the industrial flotation site based in Guemassa, Morocco. …

A Review On Additive Manufacturing For Aerospace Application, Radhika C, Ragavanantham Shanmugam, Monsuru Ramoni, Gnanavel Bk

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing, a cutting-edge technology often colloquially known as 3D printing, is a transformative process used to meticulously fabricate complex components by adding material layer upon layer. This revolutionary manufacturing method allows for precise control and customization, making it a go-to choice in various industries, from aerospace to healthcare. The adroitness of additive manufacturing in creating a complex geometry as a whole is very much harnessed by the aerospace Industry. Generating a component using additive manufacturing involves optimal design, methods, and processes. This review gives a broad knowledge in developing a part or product by choosing the appropriate design, method, …

Yankee Manufacturing Multi-Assembly Pvc-Gasket Assembly Mechanism, Lily Coss, Jessica Kun, Dana Chapin, Jenan Hasan

Williams Honors College, Honors Research Projects

This project focuses on designing and implementing an efficient mechanism to connect PVC and gasket pieces in the door assembly process at Yankee Manufacturing. The aim is to improve process efficiency and productivity by increasing the assembly rate from 130 to 195 assemblies per hour, a 38% improvement. The project involved research, design iterations, performance evaluations, and adherence to engineering codes and standards, particularly focused on safety, ergonomics, and sustainability. The design process includes addressing challenges from a previous attempt, redefining project scope, and incorporating new elements such as transitioning to the packaging process seamlessly. Ethical considerations include promoting operator …

Yankee Feedstock Project, Nathan Mcanany, Richard Gualtiere

Williams Honors College, Honors Research Projects

This report details the design process, application, considerations, costs, and functionality of an automated tape “feedstock” machine. Yankee Insulation Products will use this project to create rolls of Aluminum foil tape that are included in their Therma-Dome assembly kit. The goal of this design will aid in the streamlining and effectiveness of the current process. When designing the automated process, the current process was evaluated for areas of improvement. Design parameters were also given to the project by the sponsoring company that were to be considered and incorporated.

A Simulation Model Analysis In The Us-Mexico Border, Carlo A. Zorola, Hiram Moya, Aditya Akundi

Manufacturing & Industrial Engineering Faculty Publications

Supply Chain (SC) is the flow of goods or services between supply and demand points. New or innovative strategies in SC have been researched and developed to deal with disruptive events, such as COVID-19, hurricanes, geopolitical, and even climate change. These challenges create supply imbalances, logistical challenges, and policy restrictions for transborder commerce. The DHS has implemented the Free and Secure Trade (FAST) program in both the US-Mexico and US-Canada border. These lanes are dedicated queues for commercial vehicles. In 2022, the government of Nuevo León, México, opened a dedicated lane just for Tesla´s northbound commercial traffic. There has been …

Artificial Intelligence For Enhanced Flotation Monitoring In The Mining Industry: A Convlstm-Based Approach, Ahmed Bendaouia, El Hassan Abdelwahed, Sara Qassimi, Abdelmalek Boussetta, Intissar Benzakour, Oumkeltoum Amar, Oussama Hasidi

Manufacturing & Industrial Engineering Faculty Publications

In the mining industry, accurate monitoring of the elemental composition in the flotation froth is crucial for efficient minerals separation. The hybrid deep learning algorithms offer powerful computational intelligence for real-time monitoring of froth quality in flotation processes. This soft sensor tool can provide valuable information for process control, including predictions of the elemental chemical composition. In this study, we propose a novel approach based on a Convolutional Long Short-Term Memory (ConvLSTM) neural network for real-time monitoring of chemical composition grades in flotation froth. The proposed model effectively extracts spatial and temporal patterns from video data, providing a better …

Laser Deposition Additive Manufacturing Of Multi-Material And Metal-Ceramic Composite Structures, Manikanta Grandhi

Graduate Theses, Dissertations, and Problem Reports (ETD)

The increasing performance requirements of modern industrial systems, coupled with the imperative for decarbonization, necessitate a fundamental rethinking of metallic component design and manufacturing. Traditional materials, with their inherent limitations in property optimization, susceptibility to degradation, and weight constraints, are proving insufficient. Multi-material joining offers a potential solution, enabling designers to strategically integrate diverse materials with specific, tailored properties into single component. Functionally graded materials (FGMs) and oxide dispersion strengthened (ODS) materials are prime examples of this approach, delivering substantial improvements in wear resistance, thermal regulation, high-temperature resilience, and overall weight efficiency. However, conventional manufacturing approaches further exacerbate the limitations …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Numerical Study Of Solar Receiver Tube With Modified Surface Roughness For Enhanced And Selective Absorptivity In Concentrated Solar Power Tower, Shawn Hatcher, Mathew Z. Farias, Jianzhi Li, Peiwen Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

Concentrated solar power (CSP) is a reliable renewable energy source that is progressively lowering its cost of energy. However, the heat loss due to reflected and emitted radiation hinders the maximum achievable thermal efficiency for solar receiver tubes on the solar tower. Current solar selective coatings cannot withstand the high temperatures that come with state-of-the-art CSP towers often needing to be recoated soon after initial operation. We intend to use Inconel 718 with different additive manufacturing (AM) practices to construct surfaces that allow for more light-trapping to occur. By adjusting printing parameters, we can tailor a surface to allow for …

Wire Deflection Investigation During Wedm Of Aisi 304 Stainless Steel: An Experimental And Numerical Study, Sara A. El-Bahloul, Mohamed G. Elkhateeb

Mansoura Engineering Journal

Wire electrical discharge machining (WEDM) is a specific form of electrical discharge machining that employs a small diameter wire electrode to cut a narrow kerf in the workpiece. Since the wire deflection has a negative effect on the performed cutting, this research seeks to study the resultant wire deflection during WEDM of AISI 304 stainless steel. This study is performed with the help of three types of modeling; namely, mathematical modeling, experimental modeling, and thermo-mechanical finite element modeling. The mathematical modeling is performed to analyze the stresses and the wire lag, while the experimental modeling is achieved to observe the …

Laser-Induced Forward Transfer (Lift) Based Bioprinting Of The Collagen I With Retina Photoreceptor Cells, Md Shakil Arman, Ben Xu, Andrew Tsin, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This study focuses on the 3D bioprinting of retina photoreceptor cells using a laser-induced forward transfer (LIFT) based bioprinting system. Bioprinting has a great potential to mimic and regenerate the human organoid system, and the LIFT technique has emerged as an efficient method for high-resolution micropatterning and microfabrication of biomaterials and cells due to its capability of creating precise, controlled microdroplets. In this study, the parameters for an effective femtosecond laser-based LIFT process for 3D bioprinting of collagen biomaterial were studied. Different concentrations of collagen I solutions were tested and 0.75 mg/ml to 1 mg/ml collagen Ⅰ was identified as …

Estudio Termoquímico Asistido Por Computadora De Los Polifenoles Presentes En La Fresa [Thermochemical Computer Assisted Study Of Polyphenols Presented In Strawberry], Federico Lopez, Jeimmy Rocio Bonilla Méndez, Luis Ricárdez Sandoval, Hiram Moya, Daniela Mainardi, Arturo González Quiroga, Jeffrey Leon-Pulido

Manufacturing & Industrial Engineering Faculty Publications

Las fresas son un alimento importante en Latinoamérica debido a sus componentes químicos, puesto que son una considerable fuente de calorías y polifenoles. Estos elementos son útiles por su capacidad antioxidante y otras propiedades beneficiosas para la salud. Sin embargo, la presión y la temperatura pueden llegar a afectar la integridad molecular de estos componentes, por lo tanto, en el proceso de producción de diferentes productos basados en fresas, se requiere estudiar las propiedades termoquímicas de los diferentes polifenoles presentes en esta fruta. Para ello, se extrajeron datos de las principales familias de polifenoles, antocianinas, flavanoles, flavonoles, ácidos hidroxibenzoicos y …

Recor-Diy, Maxwell W. Ferrer

Industrial and Manufacturing Engineering

RecorDIY is an affordable alternative to ordering Vinyl Records from a manufacturer in the form of an at-home record-cutting lathe. This report will cover the record cutting process from audio to physical, at home record lathes that are currently available, and the possible improvements that I plan to implement in order to make these devices a more viable alternative for small artists. Current models can only create low fidelity records, specifically they struggle with lots of “noise”, extra sounds such as static that make it harder to hear the actual audio. Another issue is record size, as current models can …

Experimental Investigation Of Various Energy-Absorbing Layer Materials And Sodium Alginate Viscosities On The Jet Formation In Laser-Induced-Forward-Transfer (Lift) Bioprinting, Shuqi Zhou, Chaoran Dou, Jianzhi Li, Qiqi Zhang, Qilin Dai, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

Laser-induced-forward-transfer (LIFT) bioprinting technology has been viewed as a regenerative medicine technology because of its high printing quality and good cell viability. To stabilize the jet to achieve high-quality printing, an energy-absorbing layer (EAL) can be introduced. In this study, three materials (graphene, gelatin, and gold) were utilized as the EAL. The effect of each EAL on the jet generation process was investigated. Besides, the effect of graphene EAL thickness was addressed for various experimental conditions. The jet generation process using sodium alginate solutions with different concentrations (1 and 2 wt. %) was also discussed to investigate the effect of …

Naphtha Characterization (Piona, Density, Distillation Curve And Sulfur Content): An Origin Comparison, Aline Pioli Silva, Juliana Otavia Bahú, Renato Soccol Jr., Leonardo Rodriguez-Urrego, William Stive Fajardo-Moreno, Hiram Moya, Jeffrey Leon-Pulido, Víktor Oswaldo Cárdenas Concha

Manufacturing & Industrial Engineering Faculty Publications

Naphtha is an important distillation product of crude oil, and is used as a raw material for first-generation products such as ethylene, propylene, gasoline, xylene (BTX), and others. However, due to the different sources of crude oil, differences in naphtha composition impact the quality of conversion processes. Parameters such as pressure, charge flow, and temperature need to be adjusted for conversion efficiency. This work aims to compare naphtha samples from different origins, through the analysis of distillation curve (ASTM D86), density (ASTM D4052), total sulfur (ASTM D4294), and n-paraffins, iso-paraffins, olefins, naphthene, and aromatics (PIONA, ASTM D5134). Among these parameters …

A Molecular Dynamics Study Of Atomic Diffusion Effects On Thermomechanical Properties Applying Laser Additive Alloying Process For The Cantor High Entropy Alloy, Mathew Farias, Han Hu, Shanshan Zhang, Jianzhi Li, Ben Xu

Manufacturing & Industrial Engineering Faculty Publications

High entropy alloys (HEAs) can be manufactured in many conventional ways, but it becomes difficult to fabricate heterogeneous materials and structures. The Selective Laser Melting (SLM) method generally melts pure elemental powders or prefabricated alloy powders without an alloying process. In-situ alloying in SLM, which is also called Laser Additive Alloying (LAA), using pure elemental powders becomes a promising method for creating HEA with heterogeneous structures. However, the effect of the diffusion of elements in the molten pool on the formation of HEA remains unclear. In this paper, the well-discussed Cantor HEA was studied in an in-situ alloying situation, where …