Manufacturing Commons^™

Design Of An Automated Welding Process For Synergy Mfg., Parsa Bakhtiari

Industrial and Manufacturing Engineering

This senior project involves a partnership with a local off-road parts manufacturer called Synergy Mfg. Synergy is experiencing a rapid increase in demand that is difficult to meet with their current processes. Because of this issue, Synergy is exploring automation in order to decrease their cycle times and increase their production output. More specifically, this report concentrates on automating a manual welding process that has a lengthy cycle time which causes Synergy’s difficulties with meeting demand. Due to time constraints, this project focused on the automation of a welding process for only one part that Synergy produces. This part contains …

Predictive Analytics In Forecasting, Matthew Suarez

Industrial and Manufacturing Engineering

Predicting future demand can be of tremendous help to businesses in scheduling and allocating appropriate amounts of material and labor. The more accurate these predictions are, the more the business will save money by matching supply with demand as closely as possible. The approach for an accurate forecast, and the goal of this project, involves using data analytics techniques on past historical sales data. Working with Campus Dining, a year's worth of their daily sales data will be analyzed and ultimately used for the end result of both an accurate forecasting technique and a way to display the results in …

Design Of A Finger Lime Loading System, Joel Jameson Hitchen

Industrial and Manufacturing Engineering

Automation for post harvest processing of finger limes is required to meet demand for the new citrus fruit being introduced to United States of America food and agriculture market. As labor wages rise, and demand climbs for finger lime product a creative solution is needed to eliminate human labor and reduce the manual input needed to process finger limes. Building on an already successful processing tool, a semi-­automated loading system was designed and implemented to overcome the problem.

Design For Waste Reduction And Efficiency Improvement For The Construction Usage Of The Tower Crane, George Merida, Roman Richard

Industrial and Manufacturing Engineering

Webcor Concrete Group’s on-site tower crane is currently experiencing unknown forms of inefficiency. The project team used the DMAIC methodology to implement Define, Measure, Analyze, Improve, and Control in order to guide and structure the project. After the project team formulated a problem statement, observations were collected of tower crane deliveries resulting in 470 individual data points. The data was then analyzed using basic statistics, histograms, and lean manufacturing tools in order to identify wastes and inefficiencies. Once the wastes and inefficiencies were identified, root cause analysis was performed. The identified root causes were then used as the basis for …

Designing An Information System To Efficiently Coordinate Film Screenings, Galen Dougherty

Industrial and Manufacturing Engineering

This paper explains the engineering concepts design efforts used to build an information system to efficiently coordinate film screenings. The market served is an emerging group of film makers and production companies that have limited resources. The application aims to save both time and money in coordination efforts for screening films in the local community. The project case examined is a small production start-up from Cal Poly San Luis Obispo named Yellow Glass Media. The design described in the paper specifically targets their needs which are assumed to be representative of the needs of the larger emerging market. The design …

Design Of Process Improvements To Increase Field Work Efficiency At Webcor Concrete Group, Fiona Blackburn

Industrial and Manufacturing Engineering

This study set out to analyze and improve field work efficiency at Webcor Concrete Group, a subcontractor working on a new housing project at the Cal Poly, San Luis Obispo campus. Specifically, they would like to access their performance in regards to end-of-break to back-to-work time and the 30-30 rule, which states that everything a field worker needs should be accessible within 30 seconds or 30 feet. The problem statement is that Webcor wishes to utilize their field hours 5% more efficiently through a study of current shortcomings and recommended improvements. A review of the literature generated process improvement ideas …

Design Of An Improved Toolbox And Connex For Webcor Builders, Veronica Ana Valley, Jamie Mari Kusumoto

Industrial and Manufacturing Engineering

Webcor builders asked the Senior Project team to create a design of an organized job box on Solidworks that improves worker efficiency, improves jobsite organization, and limits financial losses, which are common tool-related issues for the company. As a group, the members analyzed the job box current situation using multiple perspectives to create two designs, one streamlined by each project group member. The project group developed each of the designs based on a current state analysis in which we analyzed the job box, simulated finding tools to create multiple motion studies, collected worker feedback, conducted an ergonomic analysis, conducted a …

Redesign Of Good Karma Bike’S Facility Layout And Bike Storage Process, Ryan Phillip Ogan, Derek Chung, Tommy Chang

Industrial and Manufacturing Engineering

Good Karma Bikes is a non-profit organization that services and restores bikes that customers bring into the shop. Good Karma Bikes has plans for a dramatic increase in storage capacity for the next few years. Good Karma Bike’s warehouse area is currently overflowing with bikes due to the large increase in demand. A redesign of the warehouse layout is needed to handle the increase of incoming bikes and to improve product flow through the space. The project team’s objectives are to:

• Improve accessibility and reduce time it takes to unrack a bike
• Increase space utilization by improving bike storage capacity …

Design Of Material Flow And Tracking System For Supply Chain And Logistics: E. & J. Gallo Winery – Modesto Campus, Joshua Balland, Angela Mariani

Industrial and Manufacturing Engineering

E. & J. Gallo is a winemaking company located in Modesto, California. Our group was assigned to measure and analyze E. & J. Gallo’s current state process for their 5-Buggies (transportation trailers) to find key areas of inefficiency. After analyzing their current state process, we designed a more efficient flow of materials for the 5-Buggy system within the Automatic Train Loading (ATL) station and found an optimal solution for tracking the 5-Buggies on the Modesto campus. Our project started with preliminary research on fleet management, material management systems, and tracking methodologies. Once these areas of research were fully understood, our …

Design Of A Process To Implement An Annual Community Fundraiser For Sprout Up, Katherine Lynette Phillips, Kimberly Nicole Walter

Industrial and Manufacturing Engineering

Sprout Up—in San Luis Obispo—is currently a non-profit organization that teaches free environmental science education to first and second graders around the San Luis Obispo area. Due to recent circumstances, Sprout Up will soon be losing its non-profit status, and therefore they will be losing their funding as well. Their problem is that they need a stable annual fundraiser that will help the organization continue to provide free services to local elementary schools as a Cal Poly club rather than a non-profit. Multi-criteria analysis techniques were used to determine what would be the best solution to their problem and found …

Reusable Container System Optimization For Smart Cities, Aubrey Gail Sloan, Lukas James Pinkston, Andrew James Seaman

Industrial and Manufacturing Engineering

Federal and local governments are investing in methods to discourage use of disposable containers in order to reduce waste generation and protect the environment. In this project we propose the use of reusable takeout food containers as a replacement for disposable takeout food containers. Reusable takeout container systems may use barcode or RFID (radio frequency identification) technology to track and manage the distribution, collection, cleaning, and end-of-life recycling of reusable takeout food containers. Such systems will require the use of container collection bins. The design and optimization of a network of container collection bins is the topic of this project. …

Design Of A Decision-Aiding Model Between Subtractive Manufacturing And 3d-Printing, Tuan Minh Ryan Pham, Colton Harrison

Industrial and Manufacturing Engineering

3D-printing is becoming more and more widely used in industry. As this happens, manufacturers are becoming unsure of when to use this new technology and when to trudge on with subtractive (conventional) manufacturing processes. Subtractive manufacturing processes are well-established within many manufacturing companies due to its high efficiencies and low costs. However, 3D-printing offers a greater level of customization, can be automated, and can easily have designs transferred via computer files. Each method has its respective advantages, however, each one also has its downfalls. Subtractive manufacturing produces unnecessary waste, is limited from creating certain geometries, and requires a skilled laborer …

Golf Club Prototyping And Design For Spin Rate Tuning, Cole Nygren, Jordan Wright, Jesse Yap

Industrial and Manufacturing Engineering

The aim of this project was to design a golf wedge capable of increasing backspin for the amateur golfer. This was accomplished by embedding a metal lattice structure behind the clubface to allow the face to elastically deform slightly upon impact. This would increase contact time between the club and ball. The mechanism of spin generation was discussed and the relationship between contact time and spin rate was established. The design was enabled by using additive manufacturing, which allowed for the generation of a metal lattice structure. An appropriate control and prototype were designed to minimize run time and material …

Manufacturing Process And Product Design For Mass Production Of Environmentally-Friendly Fishing Lures And Weights, David Ichlokmanian, Justin Jake Bert

Industrial and Manufacturing Engineering

The current industry standard for the manufacture of recreational fishing tackle uses lead-based weights and PVC or silicone-based lures. Both materials have serious negative effects on those who handle these products, waterfowl, fish, and other animals that may consume this discarded tackle. The goal of this project is to find and design an environmentally safe process and product alternative for this industry. To do this, we researched a large amount of viable safe materials for weights and lures and used decision matrices to decide on the best one. We found that brass would be the most suitable alternative and created …

Addressing The Existence Of Overcrowding In The Cal Poly Rec Center Exercise Rooms, Josue Alvarez, Robert Hemphill

Industrial and Manufacturing Engineering

Cal Poly’s Rec Center is a facility that has been extremely popular among students ever since its initial creation many decades ago. Despite its popularity being a positive quality in most ways, it does ultimately yield a certain issue for the users of the facility; the issue of overcrowding. This senior project aimed to analyze the problem of overcrowding at the Rec Center and improve upon its most critical areas of impact. Ultimately, we identified the Rec Center’s exercise rooms as the most impacted area, with the issue of equipment unavailability being the largest factor. Thus, we designed alternative equipment …

Design Of Standard Operating Procedures For Concrete Delivery And Pour Data Collection And Analysis, Andrew Willard, Mitchell Wilhelmsen

Industrial and Manufacturing Engineering

Webcor Concrete Group (WCG) is a self-perform subsidiary of Webcor Builders, a large general contractor in the state of California. Inefficiencies plague the construction industry, resulting in Webcor reaching out to the Cal Poly Industrial and Manufacturing Department and its students for help. The opportunity addressed in this report centers on a lack of concrete pour data collection. This gap results in a struggle to defend against, or pursue, backcharges with their concrete suppliers regarding additional labor costs or wasted material. The project objective is to provide WCG with a baseline data collection system and procedure, leading to increased back-charge …

Liquid Force Kite Control System Design, Brendan Kerr, Brodie Sutherland, Alden Simmer

Industrial and Manufacturing Engineering

Kiteboarding is an ocean sport wherein the participant, also known as a kiter, uses a large inflatable bow shaped kite to plane across the ocean on a surfboard or wakeboard. The rider is connected to his or her kite via a control bar system. This control system allows the kiter to steer the kite and add or remove power from the kite, in order to change direction and increase or decrease speed. This senior project focused on creating a new control bar system to replace a control bar system manufactured by a kiteboarding company, Liquid Force. The current Liquid Force …

Creating The Foundation For A Startup: Design And Implementation Of A Database System For An Electrical Bicycle Rental Company, Alejandro Martinez

Industrial and Manufacturing Engineering

BoltAbout was started by 4 Cal Poly students, and their COO is a fellow Industrial Engineering student that I met during the first half of the senior project series class. He presented the project to me and I decided to work with him in developing this new database for his startup company. BoltAbout’s customer base is growing and current operations are not fit to meet the demand of a growing company. More specifically, their data management system can’t be used by all current employees to perform essential tasks such as rental processing, bicycle and equipment organization, and customer data analysis. …

A Study Into The Production Efficiency Of Cal Poly Chocolates, Fernando Calderon

Industrial and Manufacturing Engineering

The project objective was to: identify ways to reduce the production cost of Cal Poly Chocolates. The project was executed through the DMAIC approach, a data driven improvement cycle. Using several industrial engineering tools, six improvement opportunities were found. Three project deliverables were created and three process changes were recommended. The total annual savings, if recommendations are implemented, sum to $1700.

Advances In Composite Manufacturing Of Helicopter Parts, Tobias A. Weber, Hans-Joachim K. Ruff-Stahl

International Journal of Aviation, Aeronautics, and Aerospace

This study investigates and compares different methods for improving standard autoclave composite manufacturing in order to find suitable approaches to a more efficient composite production. The goal is not only a reduction in manufacturing times and costs but also quality enhancement. Improved part quality while decreasing costs enables a manufacturer of composite parts to expand its market share, especially in the helicopter market, which has been constantly shrinking over the last two years. Various approaches such as improved tooling technology, the use of automated systems for lamination as well as outsourcing are examined to provide an overview of possible advancements …

Modeling Of Selective Laser Sintering/ Selective Laser Melting, Xuan Wang, Connor West

Industrial and Manufacturing Engineering

Selective laser sintering and selective laser melting are powder based additive manufacturing (AM) process that can rapidly manufacture parts with comparable mechanical properties to conventional manufacturing methods directly from digital files. However, the processing recipe development and design optimization of AM parts are often based on trial and error which erodes the benefit of AM. Modeling is a powerful tool to enable faster development cycle by significantly reducing the experimental efforts. In this paper we discussed the current status of selective laser sintering/melting modeling, in which the laser and powder interaction was studied to understand and predict the process and …

Condition Assessment Of End-Of-Use Products For Remanufacturing, Jovan Morgan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

The goal of the project is to use the automated 3-D laser scanner using a Capnut as a test object to detect surface defects, corrosion and calculation error through offline quality inspection. potentially reducing labor time and cost for both consumers and manufacturers.

Adaptive Scheduling For Operating Room Management, Honghan Ye

Theses and Dissertations--Mechanical and Aerospace Engineering

The perioperative process in hospitals can be modelled as a 3-stage no-wait flow shop. The utilization of OR units and the average waiting time of patients are related to makespan and total completion time, respectively. However, minimizations of makespan and total completion time are NP-hard and NP-complete. Consequently, achieving good effectiveness and efficiency is a challenge in no-wait flow shop scheduling. The average idle time (AIT) and current and future idle time (CFI) heuristics are proposed to minimize makespan and total completion time, respectively. To improve effectiveness, current idle times and future idle times are taken into consideration …

Models For The Residual Life Of Railroad Bearing Grease In Laboratory And Industry Applications, Douglas Timmer, Constantine Tarawneh, Robert Jones

Manufacturing & Industrial Engineering Faculty Publications

Adequate lubrication in railroad bearings is crucial to the safe operation of these components. An investigation of the residual life of railroad bearing grease was conducted in a laboratory setting. The data was collected using a split-split-plot design of experiments. The Oxidation Induction Time (OIT), which is the time required for the remaining antioxidants in a sample of grease to be consumed in a test, is the response variable for this study. Low values of OIT indicate small remaining amounts of antioxidants in the grease and thus small remaining residual life in the grease. OIT measurements were made using differential …

Design And Implementation Of A Fixture For Robotic Welding, Isaac Nathaniel Williams

Industrial and Manufacturing Engineering

The Cal Poly IME department recently purchased a robotic welder. The faculty would like to see this robot incorporated into the welding class. The robot was capable of moving, but was not able to perform a weld prior to this project. This problem is addressed by creating a demonstration part for the welding class. The objectives that need to be complete for this to be possible is designing a part, designing a fixture, analyzing the cost of robotic welding, and implement welding the part in the class. The part is designed with specific requirements in mind. The fixture is designed …

Application Of Gearbox Drivetrains For Commuting Bicycles, Loren Sunding

Industrial and Manufacturing Engineering

People all over the world are beginning to ride their bicycles more often to destinations which include work, school, and local markets. Most bicycles being used for these activities have an external drivetrain exposed to the elements of the road including water, mud, dirt, and debris. External drivetrains are very fragile and when damaged, pedaling efficiency is greatly reduced and the overall riding experience diminishes.

One solution to this issue is a gearbox specifically designed for a bicycle frame. A gearbox has several mechanical mechanisms operating inside a protective housing. Since the housing is fully sealed, outside elements are not …

Assembly Line Kitting: Foam Mold Material Substitute, Samer Samy Saleh

Industrial and Manufacturing Engineering

Kitting is considered an incredibly innovative and effective solution intended to aid operators within a mixed model assembly line. However, it is a non-value added procedure and one that customers may not be willing to pay for. With this project, the goal is to examine opportunities to employ lean principles and provide a solution that further eliminates non-value added procedures, while also producing the potential for a flexible, mixed model assembly line.

To achieve the aforementioned purpose, the production of foam molds, located within industrial totes and sent to the assembly line, was found to be a major waste within …

Mri Upgrades At Radiology Associates, Patrick Cheung, Charlene Donlon

Industrial and Manufacturing Engineering

Problem Statement: The MRI machines at Radiology Associates are limiting the company’s ability to expand and compete within the local market. After discussing with technicians and managers at Radiology Associates, we decided to focus on hardware and software upgrades for the MRI machines. With 2 of the 3 locations purchasing new machines in the near future, our focus was on upgrades at the Santa Maria facility. The two machines at this location needed hardware and/or software upgrades to remain on par competitively both within the company and with local scanning options. Flexible coils are beneficial in terms of size, weight, …

Development Of A Process Monitoring Tool For The Manufacturing Process Of An Electric Vehicle Battery Enclosure, Ian Lamond

Industrial and Manufacturing Engineering

High volume manufacturing requires process control that is responsive to manufacturing related issues. It is critical that tools and resources are implemented that gauge manufacturing performance and identify root cause issues.

This project focuses on the design and manufacturing process of an electric vehicle aluminum battery enclosure and the implementation of a production measurement system. The current problem is a lack of process control communication and out of control alarms when uncontrolled events occur for manufacturing associates at the battery enclosure manufacturing work station.

This report examines the core principles of Quality Engineering, the economic advantages of implementing a vision …

Design And Prototyping Of An Adjustable Putter, Daulton Morgan

Industrial and Manufacturing Engineering

Being able to demo a golf putter is essential for a golfer since the feel of the putter is critical in determining what suits the golfer best. Due to the market being primarily dominated by right-handed players, it is difficult for left-handed players to demo high quality putters since the selection is sparse.

This report is about designing and integrating an interchangeable fastening system that allows a putter to be altered between a right and left-handed orientation, while still maintaining the traditional look of a putter. The report covers the necessary design steps, the prototyping of the putter, the projected …