Energy Systems Commons^™

Implementation Of Solar Car Technology, Greg Mccartney, Marcus Allen, Dedrick Cooper, Lelan Delissa, Eric Mayer

Posters

Under the leadership of Dr. Erik Mayer, Pittsburg State University hosted the first Kansas Solar Race Competition. The purpose of this competition is to motivate students to learn about different aspects of solar car technology. The competition motivates students by bringing multiple teams together in a friendly competition to test out their uniquely engineered and constructed wireless cars. The cars will compete in different competitions such as an agil­ity competition and a drag race. After the competition, the students are able to learn from the ingenuity of other teams and spark a curiosity to continue to learn about solar car …

Almond Based Electrocatalyst For Fuel Cell Applications, Kinsey Morey, Tucker Morey, Brooks Neria, Khamis Siam, Pawan K. Kahol

Posters

Hydrogen is considered one of the cleanest energy sources. Water spitting is one of the efficient ways to produce hydrogen as a fuel at the industrial level. Water splitting via electrolysis requires an efficient electrocatalyst to reduce the voltage required for water splitting. Currently, precious metals such as platinum are considered as one of the most efficient electrocatalysts for hydrogen production via electrolysis of water. The current challenge is to find a cost-effective alternative for this process. Molybdenum and carbon are low cost and abundant mate­rials which could be used for the synthesis of cost-effective electrocatalysts for hydrogen production. In …

Design Of A Portable Biogas Purification And Storage System, Anikumar Kosna, Bade Shrestha

Faculty Research and Creative Activities Award (FRACAA)

The objective of this study is to propose and design a commercial portable purification and storage system to commercialize biogas (which mainly consists of 45 - 75 % of methane and 15 - 16% of carbon dioxide), produced from household/non-commercial biogas plants. The selection of purification process is based on the portability of the purification system.

Numerical Investigation Of Inclination On The Thermal Performance Of Porous Fin Heatsink Using Pseudospectral Collocation Method, George Oguntala, Gbeminiyi Sobamowo, Raed Abd-Alhameed, James Noras

Karbala International Journal of Modern Science

Numerical investigation of inclination effect on the thermal performance of a porous fin heat sink is presented. The developed thermal model is solved using pseudo-spectral collocation method (PSCM). Parametric studies are carried out using PSCM, and the thermal characterization of heat sink with the inclined porous fin of rectangular geometry is presented. Results show that heat sink of inclined porous fin exhibits higher thermal performance than heat sink of vertical porous fin operating under the same thermal conditions with the same geometrical configurations. Performance of inclined or tilted fin increases with decrease in length-thickness aspect ratio. However, increase in the …

Surface And Interface Properties In Thin-Film Solar Cells: Using Soft X-Rays And Electrons To Unravel The Electronic And Chemical Structure, Lothar Weinhardt, Dirk Hauschild, Clemens Heske

Chemistry and Biochemistry Faculty Research

Thin‐film solar cells have great potential to overtake the currently dominant silicon‐based solar cell technologies in a strongly growing market. Such thin‐film devices consist of a multilayer structure, for which charge‐carrier transport across interfaces plays a crucial role in minimizing the associated recombination losses and achieving high solar conversion efficiencies. Further development can strongly profit from a high‐level characterization that gives a local, electronic, and chemical picture of the interface properties, which allows for an insight‐driven optimization. Herein, the authors' recent progress of applying a “toolbox” of high‐level laboratory‐ and synchrotron‐based electron and soft X‐ray spectroscopies to characterize the chemical …

Solar Thermoelectricity Via Advanced Latent Heat Storage, Michele L. Olsen, Eric S. Toberer, David S. Ginley, Philip A. Parilla, Emily L. Warren, Aaron D. Martinez, Jonathan E. Rea, Corey Lee Hardin, Christopher J. Oshman, Nathan P. Siegel

Other Faculty Research and Publications

An aspect of the present disclosure is a system that includes a thermal valve having a first position and a second position, a heat transfer fluid, and an energy converter where, when in the first position, the thermal valve prevents the transfer of heat from the heat transfer fluid to the energy converter, and when in the second position, the thermal valve allows the transfer of heat from the heat transfer fluid to the energy converter, such that at least a portion of the heat transferred is converted to electricity by the energy converter.

Evaluating Moisture Control Of Variable-Capacity Heat Pumps In Mechanically Ventilated, Low-Load Homes In Climate Zone 2a, Florida Solar Energy Center, Eric Martin

FSEC Energy Research Center®

The well-sealed, highly insulated building enclosures constructed by today's home building industry coupled with efficient lighting and appliances are achieving significantly reduced heating and cooling loads. These low-load homes can present a challenge when selecting appropriate space-conditioning equipment. Conventional, fixed-capacity heating and cooling equipment is often oversized for small homes, causing increased first costs and operating costs. Even if fixed-capacity equipment can be properly specified for peak loads, it remains oversized for use during much of the year. During these part-load cooling hours, oversized equipment meets the target dry-bulb temperatures very quickly, often without sufficient opportunity for moisture control. The …

Fluorescence Of Cdse/Zns Quantum Dots In Toluene: Effect Of Cyclic Temperature, Ting Chen, Weiling Luan, Shaofu Zhang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Quantum dots (QDs) are the potential material for the application in optical thermometry, and have been successfully applied to solar cells, LEDs, bio-labeling, structural health monitoring, etc. In this paper, we study the fluorescence properties of CdSe/ZnS QDs in toluene under the action of heating-cooling cycles. The experimental results show that, in a heating-cooling cycle, increasing temperature causes red-shift of the emission peak and the decrease of the PL intensity, and decreasing temperature causes blue-shift of the emission peak and the increase of the PL intensity. The surface structures of the QDs likely are dependent on the cycle numbers, which …

Proposed Delivery And Return Water Temperatures For Dartmouth College Hot Water Network, Storm Mata

ENGS 86 Independent Projects (AB Students)

This study aimed to verify the viability of the planned hot water heating network at Dartmouth, and determine the necessary hot water radiator areas needed to satisfy the empirically-determined heat demand for buildings on campus, using 5 year of steam con- sumption data. In order to verify viability, the pressure and temperature of the delivery steam and return condensate of the current heating network were used to find the amount of heat delivered per pound of steam to campus. The above-mentioned steam consump- tion data were then used to find the max heat demand for the past five years and …

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …

A Novel Approach Towards Investigating The Performance Of Different Pvt Configurations Integrated On Test Cells: An Experimental Study, Vivek Tomar, Brian Norton, G. N. Tiwari

Articles

This study elaborates the theoretical and experimental analysis for the effectiveness of different photovoltaic thermal (PVT) configurations along with their building implications. An experiment was performed on especially designed four identical prototype test cells emphasise the building integration photovoltaic thermal (BiPVT) systems. A comparative analysis of four different possible PVT configurations integrated on identical test cells namely; Case 1: Glass-to-glass PV with duct integrated on a test cell, Case 2: Glass-to -glass PV without duct integrated on a test cell, Case 3: Glass to tedlar PV with duct integrated on a test cell and Case 4: Glass to tedlar PV …

Recycling Licoo2 With Methanesulfonic Acid For Regeneration Of Lithium-Ion Battery Electrode Materials., Bin Wang, Xin-Ye Lin, Yuanyuan Tang, Qiang Wang, Michael K.H. Leung, Xiao-Ying Lu

Faculty of Science & Technology (THEi)

With the massive consumption of lithium-ion batteries in portable consumer electronics and electric vehicles, proper disposal of spent batteries is of paramount importance for sustainable development. In this study, biodegradable organic methanesulfonic acid (MSA) is investigated for the first time to leach valuable metals from waste LiCoO2 powders for battery material regeneration. Under the optimal conditions, leaching efficiencies of lithium and cobalt are achieved at nearly ∼100% and ∼100%, respectively. Comparison experiment indicates that MSA can achieve better leaching performance than previously reported organic acids (e.g. citric acid, malonic acid, succinic acid, oxalic acid) under the same conditions. Besides, strong …

Year-Round-Based Optimization Of High-Low Control In The Regenerative Indirect Evaporative Cooler (Riec), Huaxia Yan, Yi Chen, Weilong Zhang

Faculty of Science & Technology (THEi)

The performance of the regenerative indirect evaporative cooler (RIEC) highly depends on ambient temperature and humidity. To maintain indoor thermal comfort, proper control strategy is essential. Previous research indicates that high–low (H-L) control by using multispeed technology is superior to the conventional on–off control in terms of energy consumption and thermal comfort. Under H-L control, a fan switches between a high speed and a low speed. The high speed is determined by the peak load. However, the selection of low speed involves a great sense of subjectivity. Therefore, the influence of low speed on system performance is comprehensively investigated and …

Micro/Nanostructured Mnco2o4.5 Anodes With High Reversible Capacity And Excellent Rate Capability For Next Generation Lithium-Ion Batteries, Bin Wang, Shifeng Wang, Yuanyuan Tang, Chi-Wing Tsang, Jinchuan Dai, Michael K.H. Leung, Xiao-Ying Lu

Faculty of Science & Technology (THEi)

Lithium-ion batteries have already achieved great success in consumer electronics. However, the electrochemical characteristics of the existing electrodes have constrained their widespread applications in electric vehicles, which need technical demands of high energy density and fast charging. Thus, it is highly desirable to explore high-performance electrodes with high reversible capacity and excellent rate capability. In this study, micro/nanostructured MnCo2O4.5 anodes were synthesized by hydrothermal treatment with the presence of positively charged poly(diallyldimethylammonium chloride). Physicochemical property studies suggested that the as-prepared MnCo2O4.5 of 2–5 µm in diameter was mainly composed of numerous nanoneedles, which were further comprised of many inter-connected nanoparticles. …

Synthesis Of Sea Urchin-Like Nico2o4 Via Charge-Driven Self-Assembly Strategy For High Performance Lithium-Ion Batteries, Bin Wang, Chi-Wing Tsang, Ka Ho Li, Yuanyuan Tang, Yanping Mao, Xiao-Ying Lu

Faculty of Science & Technology (THEi)

In this study, hydrothermal synthesis of sea urchin-like NiCo2O4 was successfully demonstrated by a versatile charge-driven self-assembly strategy using positively charged poly(diallydimethylammonium chloride) (PDDA) molecules. Physical characterizations implied that sea urchin-like microspheres of ~ 2.5 μm in size were formed by self-assembly of numerous nanoneedles with a typical dimension of ~ 100 nm in diameter. Electrochemical performance study confirmed that sea urchin-like NiCo2O4 exhibited high reversible capacity of 663 mAh g−1 after 100 cycles at current density of 100 mA g−1. Rate capability indicated that average capacities of 1085, 1048, 926, 642, 261, and 86 mAh g−1 could be achieved …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

Calculation Methods Of Radon-222 Radiological Activity For Norm Plant With Ventilation, Pedro M. Dieguez-Elizondo, Paul G. O'Donohoe, Tomas Gil-Lopez, Juan Castejon-Navas, Miguel A. Gálvez-Huerta

Articles

A procedure is proposed to determine the radiological activity of air present in the working area of a NORM (Naturally-Occurring Radioactive Materials) plant. This NORM plant is located in the United Arab Emirates and is dedicated to the recycling of material and equipment used in oil extraction facilities. Substantial quantities of NORM waste will be present inside the enclosed plant facilities and will exhale significant amounts of Radon-222 into the working environment. The continued inhalation of this gas and its progeny has been shown to cause lung cancer. In order to reduce the concentration level of the aforementioned gas to …

Improving The Energy Efficiency Of Petrochemical Plant Operations: A Measurement And Verification Case Study Using A Balanced Wave Optimizer, Eve Man Hin Chan, Kar-Kit Chu, Hin-Fung Chow, Chi-Wing Tsang, Danny Chi Kuen Ho, Shuk-Kei Ho

Faculty of Science & Technology (THEi)

The Chinese petrochemical industry is facing pressure to meet strict targets of energy consumption and carbon emission reductions. Water pumps are the primary equipment used in most chemical and agrochemical industries sectors since water is commonly used for cooling and heating purposes, but these pumps also consume a large amount of energy. Other uses of water pumps in these industries include producing steam for heating, preparing reaction media or absorptive reagents, rinsing products, and distilling. As for the electrical components of the water pump systems, current technologies of variable frequency drives and superconducting transmission lines are unable to increase the …

A Novel 3d Simulation Model For Investigating Liquid Desiccant Dehumidification Performance Based On Cfd Technology., Tao Wen, Yimo Luo, Lu Lin

Faculty of Science & Technology (THEi)

Previous 2D CFD simulation models fail to elaborate the actual simultaneous flow and dehumidification process in liquid desiccant cooling system. Accordingly, the present study successfully developed a novel 3D simulation model for investigating the liquid desiccant dehumidification performance of a falling film dehumidifier. The penetration mass transfer model was implemented in the simulation to account for the interfacial dehumidification process. Experimental system was built for the model validation and the results indicated that the newly developed 3D CFD model could predict the absolute moisture removal accurately with an average deviation of 7%. Parametric study revealed that the dehumidification performance was …

Study On The Performance Of Distributed Energy Systems Based On Historical Loads Considering Parameter Uncertainties For Decision Making., Chong Zhang, Xue Xue, Qianzhou Du, Yimo Luo, Wenjie Gang

Faculty of Science & Technology (THEi)

Distributed energy systems (DESs) are becoming increasingly popular because of their high-energy efficiency and low pollution emissions. Accurate performance evaluation of such systems is critical for processes at the early design stages. However, there are considerable uncertainties in terms of the parameters used for performance evaluation and design optimization, including component efficiencies, customer demands, and energy markets. These uncertainties can significantly influence the performance of DESs. Without consideration of these uncertainties, the performance of DESs can be overestimated or underestimated, which leads to inaccurate decision-making. Therefore, this paper presents a comprehensive evaluation of the performance of DESs by considering uncertainties …

Flexible Integration Of Liquid Air Energy Storage With Liquefied Natural Gas Regasification For Power Generation Enhancement, Xiaohui She, Tongtong Zhang, Lin Cong, Xiaodong Peng, Chuan Li, Yimo Luo, Yulong Ding

Faculty of Science & Technology (THEi)

Liquid Air Energy Storage (LAES) is one of the most promising energy storage technologies for achieving low carbon emissions. Our research shows that the LAES produces a considerable amount of excess heat that cannot be cost-effectively utilised in a standalone LAES system. On the other hand, the regasification of liquefied natural gas (LNG) often leads to waste of a large amount of high-grade cold energy. Therefore, this paper proposes the integration of the LAES with the LNG regasification process via a Brayton cycle (denoted as LAES-Brayton-LNG), where pressurized propane is used as both the heat transfer fluid and storage material …

A Review Of Renewable Energy Assessment Methods In Green Building And Green Neighborhood Rating Systems, Chong Zhang, Chengliao Cui, Ying Zhang, Jiaqi Yuan, Yimo Luo, Wenjie Gang

Faculty of Science & Technology (THEi)

Green buildings and neighborhoods can help mitigate impacts of buildings on the environment, society and economy. Many rating systems or tools have been developed worldwide to assess and certificate green buildings or green neighborhoods. Renewable energy plays an important role in achieving green buildings/neighborhoods or zero energy buildings/neighborhoods by reducing fuel consumption and pollution emissions. However, substantial differences exist in assessing or quantifying the renewable energy in green building/neighborhood rating systems. This paper therefore provides a comprehensive review on renewable energy assessment methods adopted in green building/neighborhood rating systems, which would be very helpful to understand and then improve the …

Test 2215: Kubota M7-152, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1180 Fendt 939, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Ares Cleaning System, Andy Sagers, John Cunningham, Peter Greig, Jack Glynn

Mechanical Engineering

In this Final Design Review, the team outlines the general scope of the ARES Cleaning System project and the final design direction chosen and built. This team consists of a group of four mechanical engineering students who have been tasked with designing and manufacturing an autonomous ARES cleaning system to help their sponsor, Fracsun, better track soiling losses measured at large solar arrays. They designed, conceptualized, manufactured, and tested throughout the project as they looked to create a final, functioning product. In creating this Final Design Review, they have identified how the product will perform the desired functions and what …

Modeling And Study Of Thermal Effects On Battery Pack Using Phase Change Materials, Umang Selokar

Electronic Theses and Dissertations

The scope of the current research is to reduce the temperature distribution area in Li-ion cell and the battery pack with respect to time in battery design, using CFD technology (Computational Fluid Dynamics) in ANSYS fluent. A 3D model was design in CAD software (CATIA) and analyzed in ANSYS fluent to study the thermal behavior of the designed battery pack. An analytical thermal model was generated to evaluate the heat generation rate passing throughout the battery pack. The battery pack were analyzed and simulated on two different designs. One battery design is modeled with and without insulation (superwool EST compression …

Pico-Grid Smart Homes Power Management System, Kathleen Hobbs, Mbonya Myers

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Flow Fields Past Grain Bins As It Relates To Vertical Axis Wind Turbine Placement Optimization, Jon Richter

All Graduate Theses, Dissertations, and Other Capstone Projects

This thesis studies the 3D flow field of grain bins as it relates to Vertical Axis Wind Turbine (VAWT) placement. Numerical CFD simulations using ANSYS FLUENT were created and validated with the Minnesota State University, Mankato water channel. It was found that the best speed-up regions were on the outer most sides of the models, closest to the walls of the water channel. The model that is furthest upwind in the group has the best speed-up velocity. As the models become closer together, an asymmetric flow field develops. VAWT placement between the models for any case researched is not recommended. …

Economic Appraisal Of Hybrid Solar-Biomass Thermophotovoltaic Power Generation, C. M. Iftekhar Hussain Cmih, Aidan Duffy, Brian Norton

Conference Papers

The techno-economic parameters that influence the commercial deployment of hybrid thermophotovoltaic (TPV) solar power generation are determined using annual system simulations. It has been found that a TPV cell price of E5/cm2 or less together with a TPV operating temperature under 800°C is required for a hybrid solar–biomass TPV power plant to be economically competitive with the state-of-the-art hybrid solar–biomass Rankine cycle power plants.

Test 2211: John Deere 5125ml, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …