Energy Systems Commons^™

Organic Solar Cells Based On High Dielectric Constant Materials: An Approach To Increase Efficiency, Khalil Jumah Tawfiq Hamam

Dissertations

The efficiency of organic solar cells still lags behind inorganic solar cells due to their low dielectric constant which results in a weakly screened columbic attraction between the photogenerated electron-hole system, therefore the probability of charge separating is low. Having an organic material with a high dielectric constant could be the solution to get separated charges or at least weakly bounded electron-hole pairs. Therefore, high dielectric constant materials have been investigated and studied by measuring modified metal-phthalocyanine (MePc) and polyaniline in pellets and thin films. The dielectric constant was investigated as a function of temperature and frequency in the range …

Wind And Hydroelectric Power Simulation For The Dc House Project, Randy Lormand, Christopher Goloskie

Electrical Engineering

This project details the design and integration of a wind and hydroelectric power simulation system in correlation with the DC House Project. The simulator uses variable speed drives to rotate a DC motor which then drives a generator to produce output. This output is then regulated using a DC to DC converter which holds the voltage level constant making it easier to interface with other power sources for the house. The test results indicate that the simulator will be able to produce two separate power outputs that will provide at least 70 Watts of power in the acceptable speed range …

Rebounder Fatigue Test Machine, Caroline Reeves, Will Robertson, Ethan Flory

Mechanical Engineering

JumpSport, a company that designs and sells trampolines and trampoline accessories, has sponsored this senior project team to design, build, and test a trampoline fatigue test machine. The machine must simulate a person jumping on the trampoline to test the life of JumpSport’s fitness trampolines and kids’ trampolines. Partway through the design process, the objectives were altered and this senior project team was tasked with merging with another Cal Poly senior project group to create an all-inclusive test machine to accommodate both full-trampoline testing and individual bungee cord testing.

The final design is centered on a slider crank linkage driven …

Micro Modeling Study Of Cathode/Electrolyte Interfacial Stresses For Solid Oxide Fuel Cells, Xinfang Jin, Xingjian Xue

Faculty Publications

Delamination of the cathode/electrolyte interface is an important degradation phenomenon in solid oxide fuel cells (SOFCs). While the thermal stress has been widely recognized as one of the major reasons for such delamination failures, the role of chemical stress does not receive too much attention. In this paper, a micro-model is developed to study the cathode/electrolyte interfacial stresses, coupling oxygen ion transport process with structural mechanics. Results indicate that the distributions of chemical stress are very complicated at the cathode/electrolyte interface and show different patterns from those of thermal stress. The maximum principal stresses take place at the cathode/electrolyte interface …

Determining Appropriate Heating And Cooling Thermostat Set Points For Building Energy Simulations For Residential Buildings In North America, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Existing building energy simulation tools have a purported tendency to over-predict heating use and, in some cases, to under-predict cooling use, an outcome often attributed to inappropriate assumptions about thermostat management. As a result, a systematic review was conducted for the purposes of determining typical heating and cooling set points for single-family houses in North America. The preliminary consensus results provide an empirical basis for establishing typical inputs for building energy simulation models, increasing prediction accuracy of heating and cooling loads. The results of this review have been applied as default values in the Lawrence Berkeley National Laboratory's Home Energy …

Investigation Of Peak Load Reduction Strategies In Residential Buildings In Cooling Dominated Climates, Fady Atallah

UNLV Theses, Dissertations, Professional Papers, and Capstones

This investigation of peak load reduction strategies in residential buildings contributes to the global international efforts in reducing energy consumption and is related directly to energy efficiency in residential and commercial buildings. Work reported here involves computer aided building energy simulation of energy efficient and non-energy efficient residential homes coupled with empirical energy consumption data gathered from monitoring an array of energy efficient residential homes. The latter have been implemented for peak load reduction strategies. In addition non-energy efficient residential homes have been monitored to compare performance to the energy efficient homes. This study demonstrates the crucial importance of energy …

Predicting The Performance Of A Solar Domestic Water Heating System With Evacuated Tube Collectors And Hydronic Radiant Flooring, Kimberly Nicole Hammer

UNLV Theses, Dissertations, Professional Papers, and Capstones

Residential solar thermal system installations have been significantly increasing in the last decade and there exists limited resources for reasonably predicting the performance of those systems. A simulated model is developed in MATLAB® and used to predict the performance of a solar domestic water heating system. In the simulated system, hot water is generated using evacuated tube solar collectors and stored in a domestic hot water storage tank, which utilizes immersed coil heat exchangers. The system is designed to provide hydronic radiant floor heating to its occupants based on the heat loss of a building energy model for an energy-efficient …

Hydraulic And Thermal Performances Of A High Temperature Ceramic Plate-Fin Heat Exchanger (Pfhe), Vijaisri Nagarajan, Yitung Chen, Qiuwang Wang, Ting Ma

College of Engineering: Graduate Celebration Programs

• Numerical analysis was carried for novel configuration of high temperature PFHE
• Fluid flow and heat transfer properties were studied for various fin configurations
• Ripsaw fin design with thickness of 0.05 mm gives maximum heat transfer with less pressure drop and friction factor
• Validation and parametric study were carried out for all fin configurations

Efficient Multifamily Homes In A Hot-Humid Climate By Atlantic Housing Partners, Florida Solar Energy Center, Dave Chasar

FSEC Energy Research Center®

With assistance from the Florida Solar Energy Center (FSEC) and its Building America Partnership for Improved Residential Construction (BA-PIRC), Atlantic Housing Partners (AHP) has implemented a high performance, systems-engineered package of measures in the new construction multifamily housing sector in the hot-humid climate zone. This report demonstrates how the initiative achieves Building America (BA) goals of 30%-50% energy savings. In addition, the report discusses the role of utility allowance calculations, used as part of the low-income housing tax credit process, to value those energy savings.

Results of energy modeling are presented to demonstrate that the specification package achieves 40% energy …

Assessment Of Solar Photovoltaic Technologies Using Multiple Perspectives And Hierarchical Decision Modeling, Nasir Jamil Sheikh

Dissertations and Theses

The objective of this research is to build a decision model for a comprehensive assessment of solar photovoltaic technologies using multiple perspectives. These perspectives include: social, technological, economic, environmental, and political (STEEP) with each perspective consisting of multiple criteria. Hierarchical decision modeling and expert judgment quantification are used to provide the relative ranking of the perspectives and criteria. Such modeling is effective in addressing technology evaluations with competing and contrasting perspectives and criteria where both quantitative and qualitative measurements are represented. The model is then operationalized by constructing desirability functions for each criterion. The combined results provide an overall numerical …

Broncoblade: An Open Source Wind Turbine Blade Analysis Tool, Alex R. Quinlan

Masters Theses

This thesis reports the development and validation of BroncoBlade, a horizontal axis wind turbine analysis tool. BroncoBlade prepares finite element models and integrates them with an aeroelastic simulator. Analysis results for the SNL100-00 baseline blade are evaluated against reference results published by Sandia National Laboratories. Variations on the SNL100-00 blade incorporating carbon fiber are compared to the baseline blade.

Development Of Cfd Models For The Purposes Of Exploring Free Surface Wave Phenomena, Leonard P. Stoehr

Masters Theses

With the push for finding alternative, green energy sources, the harnessing of energy from ocean and lake waves is becoming a more researched field. To fully understand the behavior of wave interactions and optimize designs to extract this energy, it is necessary to develop computer models that can accurately replicate this behavior. A case is presented in which previous work done using the wave tank found in the Western Michigan University fluids lab is examined. The case involves harnessing the energy generated by ocean waves through the usage of plates of different shapes resting horizontally on the water’s surface. The …

Approaches To 30% Energy Savings At The Community Scale In The Hot-Humid Climate, Florida Solar Energy Center, Stephanie Thomas-Rees

FSEC Energy Research Center®

The Building America Partnership for Improved Residential Construction, formerly the Building America Industrialized Housing Partnership, has worked with several community-scale builders within the hot-humid climate zone to improve performance of production-, or community-scale, housing. Tommy Williams Homes (Gainesville, Florida), LifeStyle Homes (Melbourne, Florida), and Habitat for Humanity (various locations, Florida) have all been continuous partners of the Building America Program. The activities of these partners, described in this report, achieved the Building America goal of 30% whole-house source energy savings using packages adopted at the community scale. For new homes, the reference case is the B10 Benchmark, aligned with 2009 …

Energy Retrofit Field Study And Best Practices In A Hot-Humid Climate, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

In the U.S. Census Bureau's Southern region, housing starts ranged from 4.6 to 5.9 million per decade from the 1970s through the 2000s, nearly twice as many as any other region across all decades. The potential for energy savings in these homes is vast, perhaps our most available untapped resource for reducing energy needs. This study was conducted in central Florida, which forms part of the Census Bureau's Southern region. It examines efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in that region.

Hydrogen Storage Properties Of Magnesium Based Nanostructured Materials Produced By Glancing Angle Deposition, Mehmet Fatih Cansizoglu

Theses and Dissertations

Hydrogen is proposed as an ideal fuel for future global energy requirements with the potential to reduce carbon dioxide and other greenhouse gas emissions and improve energy independence for countries. Hydrogen is ideal for mobile applications, such as transportation vehicles and mobile devices. However storage of hydrogen remains as a challenge to realize this transition. One of the promising approaches in solid state storage is storing hydrogen in the form of metal hydrides. High hydrogen storage capacity of 7.6 wt% (weight percentage), reversibility, low cost, and abundance make magnesium an attractive material for solid state hydrogen storage. The main drawbacks …

The Effects Of Physical Activity On Greenhouse Gas Emissions For Common Transport Modes In European Countries, Aidan Duffy, Robert Crawford

Articles

This paper applies a life cycle methodology to estimate activity-related contributions of transport modes to GHG emissions. The methodology uses national input-output tables, environmental accounts, household budget data and nutritional data to derive food-sector GHG coefficients of consumption for ten European countries. The food energy requirements for each mode of transport are estimated taking account of the modal activity level and energy requirements. Walking, cycling, driving and bus travel are considered. Typical national food energy-related emissions for walking, cycling, and driving ranged from 25.6 - 77.3 gCO2-eq/pass.km, 10.4 - 31.4 gCO2-eq/pass.km and 1.7 - 5.2 gCO2-eq/pass.km; passenger transport was found …

Analysis Of Hers Index Scores For Recent Versions Of The International Energy Conservation Code (Iecc) [Revised], Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

The EnergyGauge HERS software tool was used to examine the IECC Standard Reference Design (IECC SRD) configuration for one-story 2000 ft2 and two-story 2,400 ft2 single-family homes in sixteen representative U.S. cities. IECC SRD homes were configured for the 2006 IECC, the 2009 IECC and the 2012 IECC. Two additional set of analysis were conducted, both using the 2012 IECC SRD with enhanced equipment: 1) with equipment configured to meet the 2015 National Appliance Energy Conservation Act (NAECA) equipment requirements and 2) with equipment that is on the cusp of significant market penetration with efficiencies greater than the 2015 standard.HERS …

Short-Term Test Results: Transitional Housing Energy Efficiency Retrofit In The Hot-Humid Climate, Florida Solar Energy Center, Karen Sutherland

FSEC Energy Research Center®

This project evaluates the renovation of a 5,800-ft², multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate. An optimal package of retrofit measures was designed to deliver 30%-40% annual energy cost savings for this building with annual utility bills exceeding $16,000 and high base load consumption. Researchers projected energy cost savings for potential retrofit measures based on pre-retrofit findings and disaggregated, weather-normalized utility data. A cost-benefit analysis was conducted for the seven retrofit measures implemented; adding attic insulation and sealing soffits, tinting windows, improving whole-building airtightness, upgrading heating and cooling …

Measured Cooling Performance And Potential For Buried Duct Condensation In A 1991 Central Florida Retrofit Home, Florida Solar Energy Center, Dave Chasar

FSEC Energy Research Center®

The Florida Solar Energy Center (FSEC) conducted energy performance monitoring of two existing residences in Central Florida that were undergoing various retrofits. These homes were occupied by FSEC researchers and were fully instrumented to yield detailed energy, temperature, and humidity measurements. The data gave feedback about the performance of two levels of retrofit in two types of homes in a hot-humid climate. This report covers a moderate-level retrofit and includes 2 years of pre-retrofit data to characterize the impact of improvements. The other home, covered in a separate report (Parker and Sherwin 2012), is a deep energy retrofit that has …

State Of The Irish Housing Stock - Modelling The Heat Losses Of Ireland’S Existing Detached Rural Housing Stock & Estimating The Benefit Of Thermal Retrofit Measures On This Stock, Ciara Ahern, Philip Griffiths, Micheal O'Flaherty

Articles

Ireland’s housing stock has been identified as being amongst the least energy efficient in Northern Europe. Consequently, atmospheric emissions are greater than necessary. Government funded schemes have been introduced to incentivise the uptake of thermal retrofit measures in the domestic Irish market. A study of Ireland’s housing highlights the dominance of detached houses (43%), 72% of which are rurally located and are predominantly heated with fuel oil. This paper investigates the economic and carbon case for thermal retrofit measures to the existing detached, oil centrally heated, rural housing stock. The study found the case for energy efficiency measures to be …

Co-Electrophoretic Deposition Of Liquid Metal And Silicon For Lithium-Ion Battery Application, Hanfei Zhang

Dissertations, Master's Theses and Master's Reports - Open

A low cost electrophoretic deposition (EPD) process was successfully used for liquid metal thin film deposition with a high depositing rate of 0.6 µ/min. Furthermore, silicon nano-powder and liquid metal were then simultaneously deposited as the negative electrode of lithium-ion battery by a technology called co-EPD. The liquid metal was hoping to act as the matrix for silicon particles during lithium ion insertion and distraction. Half-cell testing was performed using as prepared co-EPD sample. An initial discharge capacity of 1500 mAh/g was reported for nano-silicon and galinstan electrode, although the capacity fading issue of these samples was also observed.

Transient And Quasi-Steady Thermal Behaviour Of A Building Envelope Due To Retrofitted Cavity Wall And Ceiling Insulation, Aimee Byrne, Gerard Byrne, Anna Davies, Anthony Robinson

Articles

Accurate understanding of the thermal behaviour of building components is essential for predicting heat-ing or cooling needs and facilitates the implementation of more successful energy saving strategies and retrofits. This paper focuses on a specific measure commonly introduced through the residential energy efficiency retrofit programmes in Ireland–insulation. Traditionally, assessments of the performance of building envelopes have been based on assumed thermal resistances of the materials involved, labora-tory tests and computer modelling. The aim of the present work is to investigate the in situ thermal behaviour of a case study building and its components under transient and quasi-steady environmental conditions, comparing …

Test 2064: Kubota M135gx, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Development And Implementation Of A Simplified Residential Energy Asset Rating Model, Daire Reilly, Aidan Duffy, David Willis, Michael Conlon

Other resources

In accordance with national and European policies, the provision of financial assistance to residential energy consumers has led to a greater awareness of and interest in energy retrofit technologies. However, at present Irish energy consumers have no appropriate advice on the future performance of retrofit options available to them. This is a significant limitation to decision making and technology uptake, since this group need to know whether their investment is likely to be worthwhile.

The asset rating methodology developed for the certification of energy performance of buildings is the current industry standard of prediction of energy demand and post retrofit …

Nebraska Summary: S922 Massey Ferguson 7615, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: 913 Challenger Mt525d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2062: Challenger Mt765d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2078: John Deere 6125m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2081: John Deere 6170m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2071: Case Ih Steiger 450 Rowtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …