Energy Systems Commons^™

Solid Thermal Storage As An Energy Storage Device In Insulated Solar Electric Cookers: Thermal Modeling And Experiment, Michael Antonio Fernandez

Physics

The use of solid thermal storage (STS) as an energy storage device in insulated solar electric cookers (ISEC) was explored using a thermal simulation before retrofitting an existing cooker without energy storage and testing it under several conditions. STS sizing, material selection, and geometry were examined from both theoretical and practical perspectives and re-examined following experimental results. Characterization of the system’s thermal interfaces and methods to improve their thermal conductivities were investigated resulting in several performance enhancements to the system.

Mmteg Heatsink Design, Peyton Nienaber, Kadin Feldis, Alec Savoye, Jack Waeschle

Mechanical Engineering

In this document, Cal Poly Senior Design Team F16 presents a summary of its work developing a suitable heatsink for Gas Technology Institute’s Methane Mitigation Thermoelectric Generator. After several months of iterating between experimental testing and simulated heat transfer, a suitable prototype was selected for use in further refining simulation parameters. This was called the structural prototype and it allowed Team F16 to confirm several remaining unknowns relating to component thermal conductivity. All documentation of this process can be found in Preliminary, Critical, and Interim Design Review documents (PDR, CDR, IDR), included in this report. Having a realistic model …

Development Of An Accelerated Life Testing Method For Reliability Assessment Of Wire Bonded Interconnects Subjected To Mechanical And Electromigratory Stresses, Whit Vinson

Graduate Theses and Dissertations

Power electronic advancement trends indicate that device power density will continue to increase as a result of increased power requirements and desired device form factor reduction in order to reduce weight and material costs and increase ease of integration into next-generation power systems. With these advancements come concerns regarding device reliability. The compounded effects of increased power density and form factor reduction in electrical conductors will yield amplified joule heating effects in addition to the already increasing device temperature profiles resulting from the incorporation of wide bandgap technology into power systems. Joule heating effects can lead to a variety of …

Managing Humidity In Electronics Using Water Vapor-Selective Membranes, Songhao Wu, Andrew J. Fix, Allison Mou, David M. Warsinger, James Braun

Discovery Undergraduate Interdisciplinary Research Internship

Abstract: As outdoor electronics have become prevalent in every aspect of daily life, handling humidity in them is an emerging issue for reliable devices. As water vapor enters the electronics enclosure, there is a risk of condensation, which could prevent the electronics from functioning and further damage the device. Traditionally, the humidity removal for electronics is usually done by heating the air within the enclosure, which can be energy-intensive and less efficient. Vapor selective membrane systems are promising alternatives for air heating dehumidification as they do not require heating energy for water vapor removal. It allows water vapor transport through …

Nucleate Boiling Under Different Gravity Values: Numerical Simulations & Data-Driven Techniques., Sandipan Banerjee

Electronic Theses and Dissertations

Nucleate boiling is important in nuclear applications and cooling applications under earth gravity conditions. Under reduced gravity or microgravity environment, it is significant too, especially in space exploration applications. Although multiple studies have been performed on nucleate boiling, the effect of gravity on nucleate boiling is not well understood. This dissertation primarily deals with numerical simulations of nucleate boiling using an adaptive Moment-of-Fluid (MoF) method for a single vapor bubble (water vapor or Perfluoro-n-hexane) in saturated liquid for different gravity levels. Results concerning the growth rate of the bubble, specifically the departure diameter and departure time have been provided. The …

Experimental And Numerical Investigation Of Lauric Acid Melting At Suboptimal Inclines, Casey J. Troxler

Doctoral Dissertations and Master's Theses

Validation experiments are the baseline for completing numerical studies for engineering design. Applications of the enthalpy-porosity model have expanded in research with the growth of new technologies such as metal additive manufacturing or the renewed interest in thermal energy storage for supplementing renewable energy. A simplified experiment examining the melting behavior of lauric acid from an isothermal surface has become a common case for validating the performance of numerical models. Several studies of this rectangular experiment have been repeatedly used as model validation in a variety of problem conditions.

The first part of this study presents experimental data for the …

The Performance Response Of A Heat Pipe Evacuated Tube Solar Collector Using Mgo/Mwcnt Hybrid Nanofluid As A Working Fluid, Ahmed A. Abdel-Rehim, Shady Henein

Mechanical Engineering

Utilizing a hybrid nanofluid is a promising solution for enhancing the thermal performance of the solar collector in a sustainable manner. In the present work, the effect of using magnesium oxide/multi-walled carbon nanotubes (MgO/MWCNT) hybrid nanofluid on the thermal performance of the evacuated tube solar collector is experimentally investigated. Four different weight ratios of (80:20), (70:30), (60:40), and (50:50) are used for a hybrid of MgO with MWCNTs in a water base, respectively. The experiments are performed at a 0.02% particle concentration and at various volume flow rates ranging from 1 to 3 L/min. The results show an enhancement in …

Responses Of An Axially Rotated Tube Versus Twisted Tube Design As Two Solutions To Enhance The Thermal Performance Under A Non-Uniform Heat Flux Condition: A Numerical Study, Andrew S. Tanious, Ahmed A. Abdel-Rehim, Ahmed A. Attia

Mechanical Engineering

Enhancement of heat transfer in tubes exposed to non-uniform heat flux applications is a key factor in increasing such applications' efficiency.

In the present study, heat transfer in an axially rotating pipe with concentrated heat flux at the lower section of the pipe is numerically investigated and compared to the twisting technique in such applications. The effects of pipe’s length (1, 2, and 3 m) and rotation rate (N = 0–10.5), which is the ratio between the rotational and axial Reynold’s numbers, are studied numerically using ANSYS Fluent while the effect of the twist ratio (S = 0.1–1m) is studied …

Energy Analysis Of Heating, Ventilation, And Air Conditioning Systems, Erica Ferguson

Williams Honors College, Honors Research Projects

This project studied Heating, Ventilation, and Air Conditioning (HVAC) systems for commercial buildings. I completed an energy model Raleigh County Sheriff’s Department in West Virginia. This building’s HVAC has been completed by the consulting engineering firm: Scheeser Buckley Mayfield. I intern at this company, so they allowed me to use their original design as a basis for comparison. Load calculations, utility costs, energy consumption, and carbon footprint were derived from this energy analysis. The energy model compared three systems: variable air volume (VAV) with electric reheat, variable air volume with hydronic reheat, and variable refrigerant volume (VRV). Based on the …

Induction Brazing, Austin Squire, Scott Compton, Logan Hathaway, Michael Fleming

Williams Honors College, Honors Research Projects

Our team would like to research and explore ways of designing a portable device that uses induction heating/brazing to connect two exhaust pipes together.

Development Of Advanced Models For Pre-Ignition Prediction In Gas Engines And Analytical Model For Wallfilm Evaporation, Ankith Ullal

Dissertations, Master's Theses and Master's Reports

Ever-changing regulations aimed at improving efficiency and reducing harmful emissions have resulted in many power-generation device (engine) manufacturers to adopt new strategies. Computer simulation of these new strategies of power generation requires more accurate and higher fidelity modelling tools. In the present study, two such models are developed. The first model deals with pre-ignition phenomena driven by lubricant (lube) oil in natural gas engines and the second model is relevant to prediction of wallfilm evaporation by employing analytical solutions to transport governing equations for boundary layers.

Pre-ignition in engines has been the subject of current research with the advent of …

Partially Stratified Combustion Of Natural Gas For Spark Ignition Engines, Philip S. Zoldak

Dissertations, Master's Theses and Master's Reports

In this work, the advantages of partially stratified direct injection natural gas versus premixed port-fueled injection natural gas spark ignited engines has been studied. The volumetric efficiency, ratio of specific heats and turbulent kinetic energy was found to be higher with direct injection versus port-fueled injection thus improving thermal efficiency. A background study of optical chamber experimental data was performed to develop an understanding on the effect of pressure ratio on direct injection of methane under both fully-expanded (sub-sonic) and under-expanded (super-sonic) conditions. Under-expanded jets had a noticeable advantage in terms of turbulent kinetic energy, which led to enhanced air …

Concept Evaluation And Development Of A Novel Approach For Integration Of Turbogeneration, Electrification And Supercharging On Heavy Duty Engines, Satyum Joshi

Dissertations, Master's Theses and Master's Reports

While many technologies such as electrically assisted turbocharging, exhaust energy recovery and mild hybridization have already proven to significantly increase heavy-duty engine efficiency, the key challenge to their widespread adoption has been their cost effectiveness and packaging. This research specifically addresses these challenges through evaluation and development of a novel technology concept termed as the Integrated Turbogeneration, Electrification and Supercharging (ITES) system. The concept integrates a secondary compressor, a turbocompound/expander turbine and an electric motor through a planetary gearset into the engine cranktrain. The approach enables a reduced system cost and space-claim, while maximizing the efficiency benefits of independent technologies. …

Analysis Of Bio-Alcohols With Mie-Scattering And Ltc For Lowered Emissions In Pcci, Cesar E. Carapia

College of Graduate Studies: Theses & Dissertations

An investigation was conducted on the optimal engine parameters for facilitating lower NOX and soot emissions of PCCI combustion with either ethanol or n-butanol. The PFI fuels selected were tested at loads of 3, 4, and 5 Bar IMEP for a total of 28 total combustion tests with variations made to the EGR% and boost pressure for each test in order to find the optimal emissions strategy. A Mie-scattering spray fuel analysis was also conducted on the three fuels to gain insight on their influence on combustion/emissions characteristics. It was found that ethanol had a greater average Sauter Mean Diameter …

Development Of Phase Change Thermal Storage Medium: Cooking With More Power And Versatility, Martin Osei

Masters Theses

With an Insulated Solar Electric Cooker (ISEC), a 100 W solar panel directly cooks food while providing 5W off-grid electricity access; but it cooks slowly. Storing the day’s energy with phase change thermal storage allows ISEC to cook more rapidly as well as cook after sunset. The ISEC is made by sticking a 3ohm resistive to an aluminum pot (inner phase change assembly PCA) where another cooking pot fits. The resistive heater is surrounded by a bigger pot (outer PCA) that contains the PCM and is tightly sealed. The solar panel is connected to the resistive heater with a thermal …

Combustion Feature Characterization Using Computer Vision Diagnostics Within Rotating Detonation Combustors, Kristyn B. Johnson May

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, the possibilities of higher thermodynamic efficiency and power output have led to increasing interest in the field of pressure gain combustion (PGC). Currently, a majority of PGC research is concerned with rotating detonation engines (RDEs), devices which may theoretically achieve pressure gain across the combustor. Within the RDE, detonation waves propagate continuously around a cylindrical annulus, consuming fresh fuel mixtures supplied from the base of the RDE annulus. Through constant-volume heat addition, pressure gain combustion devices theoretically achieve lower entropy generation compared to Brayton cycle combustors. RDEs are being studied for future implementation in gas turbines, where …

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

College of Graduate Studies: Theses & Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …

Building Performance - Societal Drive, Programme And Symposium, Joseph Little, Patrick Daly

Articles

Society is increasingly looking at the construction industry to mitigate the environmental crisis and solve the housing crisis through wholesale embrace of three broad sets of challenges. The MSc in Building Performance (Energy Efficiency in Design) (MSc BP(EED)) was created in 2017 to provide significant upskilling in the knowledge, skills, and software applications of building design professionals so that they can meet these challenges, while creating compliant, sustainable, super-low energy, new and renovated buildings. The delivery of the programme supports upskilling of employed building design professionals at Masters level, encouraging a minority to develop their capacity and interest in research …

Development Of A Thermal Desalination System Using Low Quality Thermal Energy, Takudzwa C. Chipunza

Graduate Theses, Dissertations, and Problem Reports (ETD)

Abstract

Development of a Thermal Desalination System Using Low Quality Thermal Energy

Takudzwa Chipunza

The blowdown water from the cooling tower of the power plant and the produced water from shale gas industry cannot be disposed directly to the environment as they may contain dissolved solids that are harmful to the environment. A detailed physical and chemical process to remove the mineral and organic solids has been developed in West Virginia University. Such a process includes running the blowdown and produced water through a softening tank, activated carbon tank, and a reverse osmosis (RO) system. The RO reject contains a …

Computational Analysis Of The Stability Limits Of Premixed Methane-Air Combustion In Micro-Channels, Almoutazbellah Adnan Kutkut

Graduate Theses, Dissertations, and Problem Reports (ETD)

Technological progress in the last decades facilitated the development of integrated microsystem devices, including electrical and mechanical components for micro-electro-mechanical systems (MEMS). Such systems necessitate an external power supply, but typical batteries yet have some unavoidable limitations. To address this problem, numerous studies have been conducted to develop alternatives powered by micro combustion – in order to effectively utilize the high-density energy of hydrocarbon fuels. Such a global need has resulted in much more attention devoted to the combustion-based micro-power generation systems. However, to better understand the typical combustion characteristics in such microscale systems, design and performance restrictions need to …

Moisture Affinity Of Hdpe/Phase-Change Material Composites For Thermal Energy Storage Applications, Sandra K. Boetcher, Thomas B. Freeman, Rafael M. Rodriguez, Kashif Nawaz

Publications

Moisture adsorption can degrade the structural integrity of thermal energy storage devices and can negatively impact the capacity and charging/discharging behavior. Steady-state and transient experiments are conducted at various operating temperatures to evaluate the moisture affinity of organic phase-change material (PCM) shape stabilized with high-density polyethylene (HDPE).

Investigations Of The Negative Temperature Coefficient Region Of Sustainable Aviation Fuels For Mitigation Of Global Warming, Richard C. Smith Iii

Honors College Theses

An investigation was led to determine the correlations between the durations of Ignition Delay (ID), Combustion Delay (CD), Derived Cetane Number (DCN), Negative Temperature Coefficient (NTC), Low-Temperature Heat Release (LTHR) regions, ringing intensity, and precent mass burn, and the effect of blending the Fischer-Tropsch (F-T) synthetic aerospace fuel (SAF), iso-paraffinic kerosene (IPK), with petroleum derived Jet-A aerospace fuel on these regions. Neat blends of Jet-A and IPK and three by mass blends of the fuels will be researched. These blends include mass percentages of 75%Jet-A and 25%IPK (75Jet-A25IPK), 50%Jet-A 50%IPK (50Jet-A50IPK), and 25%Jet-A 75%IPK (25Jet-A75IPK). The study will utilize a …

Consumer-Ready Insulated Solar Electric Cooker, Simon Ford, Sachin Gokhale, Brendan Lynn, Richard Nguyen

Mechanical Engineering

An insulated solar electric cooker, or ISEC, converts solar energy into electricity to cook food, boil water, provide heat or even help charge batteries. In this project, the focus is an ISEC with a phase change material (PCM) that helps store heat when the solar energy input is minimal, such as after the sun has set. Although a successful ISEC already exists that utilizes PCM, this product can be improved in many ways. The specific revisions investigated in this report are the improvement of the thermal efficiency with the implementation of a vacuum-sealed outer pot, the reduction of the overall …

Investigation Of Two-Phase Flow Phenomena In Rotating Paper Dryer To Achieve Effective Heat Transfer With Low Energy Consumption, Hamed Abdul Majeed

LSU New Orleans Theses and Dissertations

The paper industry provides important consumer products comprised of paper, tissue, paper board, and pulping. The papermaking process requires a lot of energy, in the form of steam, to dry the paper web in rotating dryers. As steam condenses inside the dryers by releasing heat to the dryer walls, the condensate is removed using either stationary or rotary siphons. Since the condensate is usually at a saturated state, part of the condensate flashes into vapor during the extraction process and becomes difficult to extract. Thus, additional blow-through steam is used to push the condensate out. Since this blow-through steam is …

Desalination For Sustainable Water Production With An Emphasis On Low Pressure Distillation, Jessica Vivian Savage

Doctoral Dissertations and Master's Theses

Freshwater resources depletion is a growing concern. This freshwater scarcity motivates research into seawater desalination as a means for alleviating the stresses on water demands. The primary methods of desalination include filtration and distillation. This paper explores the potential energy savings of vacuum distillation for seawater desalination to reduce the amount of energy needed to achieve phase change.

Depending on the vacuum boiler design, the vaporization mechanism may be boiling, evaporation, or cavitation. There is very little literature on cavitation that involves mass transfer, so cavitation is not developed here. This thesis focuses on standard models for boiling and evaporation …

Feasibility Study Of Portable Solar Powered Blood Storing Refrigerator, Saroj Subedi

Honors Theses

This report is focused on the preliminary feasibility of portable solar-powered blood-storing refrigerators primarily based on calculations of energy required to maintain the temperature of the refrigerator, the electricity required throughout the day, calculating sufficiency of power supplied by the solar panel, and selection of battery for power storage. The method and the trend of a feasibility study involve the study of blood properties, separation of blood components after donation, and their storage conditions. Then, the portable size of the refrigeration has been proposed with three different compartments for storage of each blood component. The further methods involve the selection …

Waste Heat Recovery Of Industrial Regenerative Thermal Oxidizer (Rto), A Case Study, James Trimpe Jr.

Theses and Dissertations--Mechanical and Aerospace Engineering

Industrial processes that utilize and release hazardous compounds into the atmosphere are required to break down those compounds before exhausting them from their facilities. An industry-recognized method to break down those hazardous compounds is through thermal oxidation. Thermal oxidation is a process where the compounds are exposed to their auto-ignition temperature in an oxygen-rich environment and combust. The output of thermal oxidation is carbon dioxide, water vapor, and heat. Thermal oxidizers are equipment that performs the thermal oxidation process. The heat output from thermal oxidizers is wasted if directly exhausted into the atmosphere. Regenerative thermal oxidizers (RTOs) use the waste …

Multiscale Investigation Of Dropwise Condensation On A Smooth Hydrophilic Surface, Shahab Bayani Ahangar

Dissertations, Master's Theses and Master's Reports

The objective of this work is to identify the fundamental mechanism of dropwise condensation on a smooth solid surface by probing the solid-vapor interface during phase-change to evaluate the existence and structure of the thin film and the initial nucleus that develop during condensation. In this work, an automated Surface Plasmon Resonance imaging (SPRi) instrument with the ability to perform imaging in intensity modulation and angular modulation is developed. The SPRi instrument is used to probe (in three dimensions) the adsorbed film that forms on the substrate during dropwise condensation. SPRi with a lateral resolution of ~ 4-10 μm, thickness …

Marangoni Propulsion Of Active Particles, Saeed Jafari Kang

Dissertations, Master's Theses and Master's Reports

We study the surfing motion of active particles located at a flat liquid-gas interface. The particles create and maintain a surface tension gradient by asymmetrically discharging a surface tension-reducing agent. We employ theory and numerical simulation to investigate the Marangoni propulsion of these active surfers. First, we use the reciprocal theorem to establish a relationship between the propulsion speed and the release of the active chemical. This theoretical relation is utilized to examine the effect of wall confinement and geometry on the Marangoni-driven motion of active particle when the inertial effects are negligible and when the transports of the released …

Performance And Economical Analysis Of Different Insulating Materials Used To Reduce The Heat Load Of An Existing Residential Building, Radwa A. El-Awadly, Ahmed A. Abdel-Rehim

Mechanical Engineering

The energy consumption from the residential sector is an important element which has an impact on the total energy consumption in any country. The heating and air conditioning loads can be reduced through many means. Using thermal insulation in buildings does not only contribute in reducing the required air conditioning system size, but also in reducing the annual energy cost for the whole building. In this case, the energy saving varies according to the building type, the climatic conditions at which the building is located as well as the type of the insulating material used. In the present study, an …