Computer-Aided Engineering and Design Commons^™

Elevate Hardcase, Caleb J. Bailey, Colby M. Cordoba, Marissa Mccleod, Shaan Sandhu

Mechanical Engineering

The Elevate Hardcase project developed a portable mechanical elevation system that allows users to access rugged hard cases at a comfortable working height without needing a separate table or placing the case on uneven ground. The design focuses on improving ergonomics, portability, stability, and quick setup for users in field environments such as photography, hunting, and maintenance. Through customer research, concept development, prototyping, analysis, and testing, the final system was designed to support a loaded hard case, provide height adjustability, remain stable on uneven terrain, and be deployed by a single user in under five minutes. The final prototype demonstrates …

A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading, Nahla Helmy Matar

Theses and Dissertations

The problem of mixed-mode fatigue crack growth has been a persistent research challenge. The determination of fatigue crack propagation direction directly impacts the safety and integrity of components and structures, making it crucial in various industrial applications, including welded drilling pipes, aerospace, and automotive engineering. Unlike uniaxial loading, mixed-mode cracks tend to change direction frequently (kinking), and nonproportional loading adds to the complexity of the problem. This research aims to estimate the crack propagation direction and fatigue crack life in linear elastic materials subjected to mixed-mode (I+II) loading conditions under proportional or non-proportional cyclic loading. Numerical software was developed based …

Mars Rover Wheels And Drive, Presley S. Sacavitch, Ryan W. Trevena, Dylan A. Mack, Daniel Hudak

Mechanical Engineering

Cal Poly’s Poly1Rover team, advised by Professor Rich Murray, aims to deploy four student-designed mini-Mars rovers, each equipped with a sample-tube retrieval claw, before 2030. However, the wheels of Poly1Rover’s current 6th generation rover are not ready for deployment to Mars, as they do not utilize space-grade materials, are not optimized for manufacturability, and lack sufficient spoke compliance to absorb landing and high-impact loads. This project will be developed by a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo (Cal Poly): Daniel Hudak, Dylan Mack, Presley Sacavitch, and Ryan Trevena. Next Intent is providing funding …

Formula Sae Planetary Gearbox Characterization Dynamometer, Trevor Marco Toma, Thomas Welden Pierce, Ethan Liu

Mechanical Engineering

This report outlines a custom hub motor dynamometer requested by the Cal Poly Racing FSAE team. The need for this testing platform is to characterize an existing Formula SAE planetary gearbox for a proposed 4WD powertrain. Hub motors, compact electric machines integrated directly into each outboard wheel, offer significant advantages in efficiency, traction, and chassis packaging compared to conventional RWD drivetrains. By mapping torque capacity, efficiency, lubrication method effectiveness, and fatigue life, the team can validate gearbox design and performance.

This senior project group designed and built a dynamometer according to these specifications which will allow for successful testing to …

Peltier-Based Hydration Accumulation Terminal (P.H.A.T.), Jenner Mucher, Ethan Pace, Renee Robolledo, Sabrina Luo, Taehoon Lee, Tarsem Pal

Mechanical Engineering

The objective of this project is to design an innovative potable water dispenser capable of safely delivering hot, ambient, and chilled water on demand for human lander missions. The system will support astronauts’ hydration and food rehydration needs while minimizing mass, power, maintenance, and contamination risks in microgravity and partial-gravity environments. Current spacecraft dispensers, such as the International Space Station (ISS) system, provide only heated water and have limited temperature control, cleaning accessibility, and microbial resilience. Building on NASA heritage designs and lessons learned from the ISS Potable Water Dispenser, this project advances a lighter, simpler, and more energy-efficient concept …

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Process Improvement For Thermal Barrier Coating Masking Applications, Katherine Meezan, Aiden Senn, Saksham Giri, Katelyn Perez

Mechanical Engineering

Solar Turbines, a gas turbine manufacturer, needs a more efficient method to prevent the application of a thermal barrier coating (TBC) to select areas of their combustion liners during manufacturing. Currently, the process is labor, material, and time intensive: reusable masking tools should increase the efficiency of the TBC process.

This project is sponsored in full by Solar Turbines, and is under the guidance and administration of three Solar Turbines engineers: Chris Noone, Rick Rogers, and Carson Roff. The project is mentored by Cal Poly senior design Coach, Rick Lasko. This project will be completed by a team of four …

Cal Poly Fluid Powered Vehicle Challenge 2025/2026, Ethan Malachi Nejame Zeiset, Christian Anthony Cuamani, Daniel Chacon-Bizarro, Marcus Minera, Bradley Hansell

Mechanical Engineering

In this Final Design Report, the Cal Poly Fluid Power Vehicle Challenge Contending Team competed in Sun Hydraulics’ 2026 Fluid Powered Vehicle Challenge. The objective of the competition is to expose college students to the fluid power sector, the “hidden giant” of the engineering industry. Specifically, student teams are tasked with the development of a human-powered, fluid-driven vehicle for use in various competitive settings. The team prioritized the optimization of an existing prototype for simplicity, ease of maintenance, and reliability during the competition. The existing prototype exhibited issues related to the main frame’s deflection under load, a lack of gear …

Computational Insights Into Nucleosome Dynamics In Epigenetics Using Molecular Dynamics Simulations, Rutika Patel

Dissertations, Theses, and Capstone Projects

Nucleosome core particles (NCP) are the building blocks that form a highly organized and compact chromatin structure. Nucleosomes package DNA in the nucleus of eukaryotic cells. The NCP consists of about 147 base pairs of DNA wrapped around the histone octamer, with 1.65 superhelical turns in a left-handed manner. The histone octamer is composed of two copies of H3, H4, H2A, and H2B. Together with histone H1 and linker DNA, they further assemble into a higher-order chromatin structure. The nucleosome complex is stabilized by electrostatic interactions between positively charged histone residues and the negatively charged DNA backbone. To effectively access …

Mars Mini Rover Sample Retrieval Robotic Claw, Cami Chambers, Ani Lachikian, Alexa Ramirez, Alex Power

Mechanical Engineering

This project involves several key stakeholders, including the Poly1 Rover Club, Professor Rich Murray, and NASA’s Jet Propulsion Laboratory (JPL). The primary objective is to develop an improved robotic claw capable of retrieving sample tubes left by the Perseverance Rover on the Martian surface. In tackling this challenge, the design must account for the harsh Mars climate while integrating cameras and electrical components, durable structure, and a rotational component to the Mini-Rover claw without incorporating an additional motor, sample storage unit, structural aspects or unnecessary weight. The current Mini-Rover consists of a four-degree-of-freedom robotic arm with joints often referred to …

Sensory, Light, And Sound Box, Galilea Andrea Portillo, Hannah Elizabeth Henderson, Marcus Kiyoshi Kanenaga

Mechanical Engineering

The Sensory, Light, and Sound Box senior project outlined an adaptable, mobile sensory environment designed to improve cognitive and visual processing skills for students with Cerebral Visual Impairment (CVI) at the Oceano Education Center. Currently, the market lacks accessible solutions tailored to these non-verbal, low-mobility students, making traditional classrooms overwhelming. This project outlines the modification of an existing static layout into a functional, three-sided wooden over-bed frame that accommodates a standard hospital bed. Our team manufactured a structurally stable verification prototype under a $500 budget, integrating slow-closing outward-hinged walls for safety, dual Bluetooth speakers, and a synchronized LED projector that …

Capstone Review: Warn Winch Proximity Sensor, Leana Girton

University Honors Theses

This thesis reviews the mechanical engineering capstone project that designed a winch proximity sensor for WARN Industries. WARN is very interested in developing this product for market as a safety and ease-of-use accessory, and working with Portland State University was the first step in this process. A group of four mechanical engineering and four electrical engineering capstone students collaborated to research sensor types, test the selected methods, and design and build a prototype. The final design implements an inductive ring, a mechanical button, and bluetooth signaling. The project succeeded in prototyping a proximity sensor for WARN, who will have access …

Characteristic Stress And Strain Optimization Of Cardiovascular Catheters With Laser-Cut Hypotubes Using Finite Element Analysis, Kyle E. Hirth

Master's Theses

Cardiovascular catheter systems rely on laser-cut hypotubes to balance flexibility and structural integrity required for minimally invasive surgical procedures.  Optimizing these mechanical characteristics remains a significant challenge.  This study aims to investigate the influence of key laser-cut geometric parameters on the mechanical performance of hypotubes through finite element analysis.

Commercially representative laser-cut hypotubes were modeled and a finite element model was developed.   Geometric design parameters were varied across a design space consisting of pitch values ranging from 0.006 in. to 0.018 in. and cuts per revolution (CPR) ranging from 2.5 – 4.5.  For each pitch and CPR combination, loading stiffness …

Aerodynamic Design And Structural Evaluation Of A Global Minimum Torque Inspired Multirotor Propeller, Zeke Bukovansky

Master's Theses

This thesis develops a repeatable design, CAD, aerodynamic postprocessing, structural screening, and manufacturing feasibility workflow for a 22-inch global minimum torque inspired multirotor propeller. Matched MIL and GMT geometries were compared at a 35 N, 4000 rpm static-hover operating condition using BEMT/XFOIL aerodynamic postprocessing, with diameter, blade count, chord distribution, airfoil schedule, and target thrust held constant. The final modeled comparison predicted a modest 1.5% reduction in torque and shaft power for the GMT case while maintaining the same thrust target. CAD construction, MATLAB reduced-order beam model, Abaqus screening, and manufacturing planning were used to identify geometry level structural and …

Toward Learning-Based Reconstruction And Part Decomposition Of Man-Made 3d Geometry: Neural Implicit Representations And Scalable Supervision, Shen Fan

Dissertations

Digital three-dimensional (3D) models are central to engineering design, analysis, and manufacturing, but learning pipelines for man-made geometry often operate on sampled carriers that do not preserve all of the structure present in exact CAD representations. This dissertation studies learning-based reconstruction and part decomposition for structured man-made 3D geometry, from general object benchmarks to CAD-derived datasets, with a focus on neural implicit representations trained from signed-distance samples, point clouds, and tessellated meshes. The goal is to make these models more accurate, more part-aware, and more consistently supervised.

First, signed distance function (SDF) reconstruction with implicit neural representations is improved through …

Sentience, Sheetal Agrawal

Masters Theses

The increasing urgency for sustainable and adaptive systems has driven research toward embedding intelligence directly into materials rather than relying solely on external sensing and control systems. This thesis explores how smart material1 embedded systems can be designed to recognize and respond to environmental signatures, defined as measurable patterns such as temperature fluctuations and mechanical forces. Central to this investigation is the integration of shape memory alloys, particularly Nitinol, with geometry-based actuation mechanisms that amplify material behavior into functional system responses.

The central argument is that designing with smart materials is a design problem, not primarily a materials science problem …

Manufacturing Of A Wooden Tortilla Press: Idea To Production, Glenn H. Walker

Honors Theses

The purpose of this thesis is to document the design, development, and manufacturing of a wooden tortilla press completed as a capstone project through the Center for Manufacturing Excellence (CME). The project follows a structured product development process that began with problem definition and concept development, progressed through design, prototyping, and jig fabrication, and culminated in a full production run on the CME shop floor. A multidisciplinary team, including engineers, a marketer, and an accountant, collaborated throughout the project to support both technical development and manufacturing execution. Project planning and scheduling were established early and maintained throughout the project to …

Lunar Manufacturing Systems And The Role Of Additive Recycling Technologies, Camille A. Newman

Honors Theses

Renewed international interest in sustained lunar exploration has created a growing demand for technologies to support long-duration space exploration. Part of the recent Artemis missions and the Moon to Mars initiative is to improve key mission capabilities and fill critical gaps necessary to sustain lunar habitation. Waste management, recycling systems, and manufacturing systems have been identified as critical technologies that need further development before a sustained mission is possible. This thesis explores the feasibility of an additive manufacturing and recycling system designed to process plastic waste generated during extended lunar habitation. Initial research focused on existing manufacturing and recycling technologies …

Niu Fsae Brake Rotor Design & Flywheel-Based Test Stand Development, Cody J. Marko, Austin Coyne, Alexander Boyden

Honors Capstones

This project addresses the need for a reliable and validated brake rotor for the Northern Illinois University Formula SAE vehicle following a prior catastrophic rotor failure within the team. Brake rotors in high-performance applications are subjected to significant thermal and mechanical loads, and inadequate design can lead to failure, posing serious safety risks and limiting vehicle performance. To solve this issue, a new brake rotor was designed alongside a dedicated test stand to both improve braking performance and enable experimental validation. The rotor was evaluated using finite element analysis (FEA), including transient thermal and structural simulations, to predict maximum temperature, …

Enhancing The Leaning Control And Braking Sensation Of A Virtual Reality Vespa Simulator, Joseph Boccuzzi, Wesley Bleck, Jacob Hannebaum

Honors Capstones

The 71 North Partnership Studio located in Northern Illinois University’s Founders Memorial Library has developed a prototype Vespa simulator featuring an interactive Virtual Reality (VR) game and reactive elements. A previous Mechanical Engineering Senior Design team developed the system and improvements after its original development were sought after over the course of the current school year. The system consists of a stationary bike that allows the rider to lean left and right, which in turn causes their in-game character to turn left and right accordingly, simulating the effect of riding a Vespa scooter within a VR environment. Improvements were made …

Effect Of Nozzle Pressure Ratio On Thrust And Flow Behavior In A Supersonic De Laval Nozzle, Esha Jain

Doctoral Dissertations and Master's Theses

Supersonic nozzles operate across a range of flow regimes. While an ideally expanded condition yields optimal thrust, practical propulsion systems rarely operate at this design point due to variations in altitude and engine operating conditions. As a result, nozzles frequently operate in off-design conditions. In overexpanded regime, where the exit pressure is lower than the ambient pressure, shock-induced separation may occur within the divergent section of the nozzle, potentially degrading nozzle performance. Understanding the aerodynamic behavior of nozzles operating under off-design conditions is therefore important for improving propulsion system performance and stability. In particular, direct thrust measurements provide a key …

Portable Ice Cube Maker, Ayden Ziegler, Emiliano Hansen, Wyatt Engdahl, Dane Hansen

Mechanical Engineering

This Final Design Report outlines the senior design project undertaken by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo, for the development of a portable backpacking ice cube maker. The project aims to design, build, and test a lightweight, compact device that produces ice cubes for backpackers in remote outdoor environments. The goal is to create a functional prototype that is durable, user-friendly, and suitable for backcountry use. This document details background research, project objectives, and project plan, and current design status.

Fsae Bespoke Brake Calipers For Hub Motor Architecture, Connor William Vaughan, Liam Upton Walsh, Bradley Brian Kern

Mechanical Engineering

Brakes are the most critical safety system on any performance vehicle, and as Cal Poly Racing transitions their Formula SAE car from a single rear motor to a four-in-wheel motor setup with regenerative braking, the team identified an opportunity to develop a bespoke brake caliper tailored to their specific needs. This document outlines the research, design, manufacturing, and validation of custom front brake calipers designed to improve upon commercial motorcycle calipers in key areas such as serviceability, mounting rigidity, thermal behavior, mass, and hub motor integration. The resulting design is a two-piece, four-piston, radially-mounted aluminum caliper featuring titanium pistons, toolless …

Cvj Torque Loss Dynamometer, Malaika Sriram, Coleman Brown, Zachary Norris, Logan Mast, Chris Mattis

Mechanical Engineering

This report details the design and results of a dynamometer testing rig built to measure torque losses in constant velocity joints (CVJs) for Cal Poly Racing's Baja SAE team. The rig spins a flywheel connected to articulable CVJs up to 800 RPM using a motor, then decouples it and measures the spin-down rate from 800 to 100 RPM to calculate angular acceleration and torque loss. The data collected from this dyno will be used to inform freewheel packaging for future Baja car development.

Design And Development Of A 12-Degree-Of-Freedom Quadruped Robot, Kai De La Cruz

Master's Theses

This thesis presents the design, analysis, and experimental validation of a 12-degree-of-freedom (DOF) quadruped robot developed as a research platform for legged locomotion and control. The system builds upon the Cal Poly Legged Robotics Group’s prior 8-DOF quadruped, addressing key limitations in manipulability, load distribution, and mechanical robustness by introducing a 3-DOF leg architecture.

The mechanical design emphasizes lightweight construction, structural integrity, and modularity to support future research extensions. Static and dynamic loading models were developed to inform component sizing and material selection. A carbon-fiber chassis and redesigned leg assemblies were fabricated and validated through finite element analysis and physical …

A Virtual-Reality-Based Dental Simulator For Endodontics With Automated Formative Feedback, Yousef Salah Abo El Ela

Theses and Dissertations

Advancements in virtual reality (VR) and haptic technology are transforming the landscape of medical and dental education, offering new avenues for safe, immersive, and repeatable training experiences. Within dentistry, endodontics presents unique challenges for preclinical education due to anatomical complexity, limited access to extracted teeth, ethical concerns, and the shortcomings of conventional plastic models. Despite endodontics specific plastic teeth being available, they fall short of replicating the hardness of real extracted teeth, are relatively costly compared to generic plastic teeth, and are ultimately a disposable item which makes them inadequate as a sustainable long-term solution. Extracted teeth do a much …

Teleoperated Robotic Arm With Vision-Based Imitation Learning, Favour E. Emmanuel, Hunter J. Donahue

Williams Honors College, Honors Research Projects

This report presents the design, development, and deployment of a teleoperated robotic arm system capable of vision-based imitation learning. The system uses a leader-follower architecture with myArm C650 and myArm M750 robots manufactured by Elephant Robotics. The leader arm movement is controlled by the operator, whereas the follower performs actions acquired from demonstrations. Data collection included synchronized joint-angle recording and multi- camera video streams capturing human demonstrations.

These demonstrations were processed with a deep learning imitation algorithm called Action Chunking with Transformers (ACT). The main capability of this algorithm is its ability to make future action predictions based solely on …

Areosense, Josephine Turney

Williams Honors College, Honors Research Projects

The AeroSense growing system is designed to make indoor aeroponic gardening easy and accessible for everyone. By combining sensors, automation, and AI, the system can monitor and adjust humidity, lighting, and nutrient levels to help plants thrive without requiring expert knowledge. The goal is to create a self-regulating garden that takes the guesswork out of growing fresh herbs and vegetables at home. The project involves building a working aeroponic prototype equipped with misters, pumps, and environmental sensors, all managed by a Raspberry Pi. Using computer vision and machine learning, AeroSense will be able to assess plant health and respond automatically …

Lift And Drag Benefits Of Morphing Aircraft, Joseph Lombardi

Master’s Theses

Aircraft use the ability to change the geometry of their wings to produce lift and drag as needed to maintain flight conditions. While the wings themselves are not physically changing shape, flaps and ailerons are used to alter the lift and drag coefficients experienced. Flaps have been used and changed over the years in order to produce better lift to drag ratios. The most commonly used flaps have been plain, slotted, and double slotted. Each type features slightly different mechanical structures, thus producing differing amounts of lift and drag. The introduction of new materials allow for a morphing flap to …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …