Computer-Aided Engineering and Design Commons^™

Analysis Of Tower Stringset Replacement From 33 Kv To 66 Kv Considering Sagging Clearance, Muhammad Lazuardi Azzura, Anne Zulfia Syahrial, Julius Purnama Eka Kartika

Journal of Materials Exploration and Findings

Efforts to increase the capacity of transmission networks are often undertaken by uprating the operating voltage of existing lines rather than building entirely new infrastructure. Such uprating typically involves the replacement of tower insulator stringsets to withstand higher voltages, while also ensuring that mechanical performance remains adequate. This paper presents an analysis of uprating the Parakan–Sunyaragi transmission line from 33 kV to 66 kV, with particular emphasis on conductor sagging and the resulting clearance from the ground. The methodology employed includes calculations based on catenary equations, analysis of conductor tensile forces, and a comparative evaluation of two widely used insulator …

Structural Design And Finite Element Analysis Of A 54 Ton Freight Wagon Bolster Test Rig Under Vertical Center Plate Load, Shandy Dwi Prayoga, I Dewa Gede Ary Subagia, I Ketut Adi Atmika, Abdul Rohman Farid, Yunior Lanang Satrio

Journal of Mechanical Engineering Science and Technology (JMEST)

Bolster is one of the bogie's components that receives direct loading from the car body and freight movement. One of the problems that occurs in the bolster is permanent deflection during vertical and transversal static loading. Therefore, a static loading test is required to evaluate the structural strength of the bolster. During the static loading test, a rig is required to hold the bolster so that the bolster is in a fixed position. The rig owned by PT. INKA (Persero) showed a plastic deformation at the vertical center plate load (VCP 5.22P). Therefore, a modified design of the rig is …

Evaluation Of Optimal Force For Intrusion Of A Periodontally Compromised Maxillary Anterior Dentition Treated With Fixed Orthodontics – A Finite Element Analysis, Tanzim Ahmed, Amrita Puri, Aatira Nair, Anshul Singla, Mathew Koshy Vaidyan, Shruti Sharma, Chhavi Singh

International Arab Journal of Dentistry

Introduction: Adult orthodontic treatment is increasingly sought due to aesthetic and functional concerns, often involving periodontally compromised patients with altered biomechanics. Reduced bone support shifts the center of resistance and necessitates lower, carefully controlled forces, while finite element modeling has become a key tool to analyze tissue response under such conditions.

Objectives: The study aimed to determine the optimal intrusive force for periodontally compromised maxillary anterior teeth using Finite Element Analysis (FEA).

Methods: A 3D finite element model of the maxillary anterior dentition was created and divided into healthy and compromised halves, the latter with one-third alveolar bone loss. A …

The Impact Of Gender Sensitization On Requirements Elicitation: A Controlled Experiment, Ruthbertha Kateule, Salome Maro, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Previous studies in software engineering have reported the importance of considering gender aspects in various software engineering activities, including requirements engineering, however, to the best of our knowledge, no work has investigated the impact of gender sensitisation on eliciting gender inclusive software requirements. The objective of this study was to understand the impact of gender sensitisation on software requirements elicitation. We conducted a controlled experiment using 40 undergraduate students from three different computing programs at the University of Dar es Salaam. The 40 participants were divided into 9 groups with both males and females. The participants were asked to elicit …

Leveraging Convolutional Neural Networks For Through-The-Wall Radar Imaging: Challenges, Impacts, And Future Directions, Tumaini Edgar, Abdulla F. Ally, Abdi T. Abdalla

Tanzania Journal of Engineering and Technology (TJET)

Through-the-wall radar imaging (TWRI) is an essential technology for military and rescue applications; however, its performance in detecting and visualizing high-quality images of targets behind walls is significantly degraded by multipath reflections and signal attenuation. This paper reviews the current state of TWRI and its challenges, and explores the transformative potential of deep learning, particularly convolutional neural networks (CNNs), in addressing these challenges. Peer-reviewed articles published from 2018 to 2024 were analysed to examine CNN applications in addressing TWRI challenges. The analysis reveals that using CNNs, TWRI systems can be more effective by filtering wall distortions, reducing noise, lowering computational …

Aerodynamics And Heat Transfer In Polymer Blown Film Processing: Experimental And Numerical Investigation, Mohammad Luqman Zulbakri, Nur Atiqah Mat. Rautin, Raa Khimi Shuib, Ku Marsilla Ku Ishak, Auratus Zuratul Ain Abdul Hamid, Mohamad Danial Shafiq, Mohamad Yusof Idroas, Muhammad Khalil Abdullah

Makara Journal of Technology

The effects of airflow dynamics, heat transfer, and mechanical properties on the HDPE blown film extrusion process were examined using a single-lip air ring with a fixed compressed-air valve opening angle of 10°. Reynolds numbers ranging from 9175 to 25911 were analyzed to understand their impact on cooling efficiency, bubble morphology, and film properties. Numerical simulations employing the Standard k−ω turbulence model in ANSYS FLUENT v2023, with mesh refinement achieving y+ ≈ 1, captured detailed flow and heat transfer behavior. Results showed that higher Reynolds numbers significantly enhanced the heat transfer coefficient, with values increasing from 1096 W/m²·K at Reynold …

Comprehensive Mechatronic Design Methodology For 6-Dof Stationary Lower Limb Rehabilitation Exoskeleton Robot With Safety-Integrated Control Architecture, Javlonbek Rakhmatillaev Mr., Nodirbek Kimsanboyev Mr., Umidjon Takabaev Mr., Zafar Juraev3 Dr.

Chemical Technology, Control and Management

This paper presents the mechatronic design of a proposed six-degree-of-freedom (6-DOF) stationary lower limb rehabilitation exoskeleton (SLLRE) robot, developed through a comprehensive mechatronic design methodology that includes mechanical design, actuator and sensor selection, and the development of a control structure based on a safety-oriented control approach. The proposed 6-DOF SLLRE mechanical design introduces a comprehensive mechanical structure comprising bilateral hip, knee, and ankle joints, degrees of freedom, joint ranges of motion, human parameters for rehabilitation training, as well as the frames and structural elements of the proposed system. Furthermore, the selection of appropriate sensors, actuators, and control architecture for the …

Design Of A 10-Ton Capacity Solar-Powered Cold Storage At The Cituis Fish Auction Site, Tangerang, Banten, Indonesia, Wardi Wardi, Muhammad Arif Budiyanto

Journal of Materials Exploration and Findings

This study presents the design of a 10-ton capacity solar-powered cold storage system for the Cituis Fish Auction Site (TPI) in Tangerang, Indonesia, as a sustainable solution to support the coastal fisheries sector. The system comprises two temperature zones: an anteroom at 5°C and a freezer room at -30°C, both integrated with a hybrid system utilizing solar panels and batteries. The total power consumption of the cooling system reaches 27.51 kW. The simulation results, obtained using HOMER Pro software, indicate that the hybrid PV system can reduce CO₂ emissions by up to 16,754 kg per year. From an economic …

Design And Performance Analysis Of Fiber Bragg Grating Temperature Sensor For Industrial Processes Sensing Applications, Paul Stone Stone Brown Macheso S.B.

Tanzania Journal of Engineering and Technology (TJET)

The Fiber Bragg Grating (FBG) sensor has become a widespread sensing device because of its small size, passive design, immunity to electromagnetic interference, and direct ability to measure physical properties like temperature and strain. Recently, femtosecond infrared laser processing and regeneration techniques have resulted in the development of stable high-temperature gratings, which are a powerful tool in smart factories, an aspect of the fourth Industrial Revolution (4IR), and show promise for application in harsh environments like high pressure, high temperature, or ionizing radiation. The development of stable high-temperature gratings that can withstand harsh environmental factors like high temperatures, pressures, and …

Design And Development Of A Low-Cost Educational Robot: A Scalable And Affordable Software Learning Platform, Diana Refaat Henry Jacob, Mohamed Tarek Elawa, Ashraf Mohamed Hafez

Journal of Engineering Research

This study presents the design and development of a low-cost educational robot to enhance learning experiences in robotics and programming. The system integrates robust software development, ensuring seamless interaction between sensors, actuators, and a custom-designed graphical user interface (GUI). The robot is equipped with various sensors and actuators to support a broad range of experiments and educational applications. The software architecture is detailed, focusing on its modularity and ease of use, enabling students to intuitively program and interact with the robot. Additionally, a series of experiments were conducted to evaluate the performance of the sensors and actuators, providing insights into …

Forecasting And Assessment Of Air Quality Dynamics In Northeast India Using Machine Learning Models, Kumar Shubham, Gopikrishnan T, Anshuman Singh

The Philippine Agricultural Scientist

This study investigated air quality dynamics in Northeast India, a region with unique terrestrial features, including the Eastern Himalayas. While air quality varies across districts, pollution impacts the entire area. Northeast India’s rich ecology is crucial for Himalayan climate regulation. Robust air quality monitoring and pollution control are essential to preserve environmental balance. This work focused on forecasting emissions of aerosols, SO₂, NO₂, CO, HCHO, O₃, and CH₄ primarily associated with human activities. Utilizing data from the Tropospheric Monitoring Instrument (TROPOMI) satellite instrument from 2019 to 2023, a 9-mo forecast was conducted using …

Effects Of Thermal Shock Protection Methods On Pressure Measurements In A Rapid Compression Machine, Myeji Materego

Tanzania Journal of Engineering and Technology (TJET)

The study investigates the impact of thermal shock protection methods on pressure measurements in Rapid Compression Machines (RCMs). It focuses on the performance of various pressure transducers, specifically 601A, 701A, 6061B, and 7005, under atmospheric initial conditions. The research emphasizes the importance of mounting techniques and coatings, revealing their significant effects on pressure trace accuracy. Special mounting adaptors for the pressure transducers were designed and manufactured, this enabled simultaneous measurements for all transducers to be made in a single compression stroke. Instantaneous pressure within combustion chamber was measured when air was compressed in RCM from initial pressure and temperatures of …

Design And Implementation Of Secured Hybrid Gateway Node For Securing Iot - Enabled Distribution Automation, Ally Bitebo

Tanzania Journal of Engineering and Technology (TJET)

The integration of smart grid and Internet of Things (IoT) technologies plays a crucial role in enhancing the quality of services provided by traditional electrical grids. This combination has enabled the introduction of new services, such as demand response, automatic meter reading, and IoT-enabled Distribution Automation (IoT-DA), which incorporates sensors, actuators, intelligent electrical devices (IEDs), and information and communication technologies to monitor and control the grid. However, this integration also introduces network security risks, including Denial of Service (DoS) attacks, false data injection, and masquerading attacks, such as system node impersonation that can transmit incorrect readings, trigger false alarms, and …

Effects Of Technical Debt On Software Interoperability, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Technical debt (TD) refers to sub-optimal development decisions that make the software costly to maintain and evolve. Examples of TD include structural complexity, violation of coding styles, and code complexity. Existing research has investigated the nature, causes and indicators of TD, as well as tools and strategies for managing TD. However, although TD could hinder the ability of a software system to be interoperable with others, existing literature has limited evidence on how TD affects systems interoperability. This limits the ability of software engineering teams to manage TD in ways that do not hinder systems interoperability. To fill this void, …

Performance Studies Of An Axial Flow Waterjet Pump Using An Unsteady Reynolds-Averaged Navier-Stokes Model, Stephen E. Monroe, Junfeng Wang, Chunlei Liang

Northeast Journal of Complex Systems (NEJCS)

In this study, an Unsteady Reynolds-Averaged Navier-Stokes (URANS) model is demonstrated its suitability for studying the flow and performance of open marine propellers and waterjet pumps. First, the accuracy of the URANS model is validated by studying turbulent flow past counter-rotating propellers (CRPs). Specifically, experimental data from Miller (1976) is employed for comparison against the URANS results. Subsequently, URANS is used to study the flow and performance of an Office of Naval Research (ONR) axial flow waterjet pump (AxWJ-2). Due to the large number of degrees of freedom for both simulations, parallel computations over 80 cores are performed. For the …

Evaluation Of Business-Driven Reference Architecture For Big Data Analytics Implementation By Public Sector Organizations In Resource-Constrained Setting: A Case Study Of Uganda, Matendo Didas

Tanzania Journal of Engineering and Technology (TJET)

Big Data Analytics (BDA) is a new area at the nexus of agenda, public sector organizations, and government business. It may satisfy the growing need for trustworthy, cost-effective services in the public sector for better, more informed decision-making processes. BDA has been proposed on the planning schedules of several public sector organizations and the government. Therefore, from the previous work, using Uganda as a case study, specifically the Uganda Bureau of Statistics (UBOS), Ministry of Health (MoH), and Ministry of Education and Sports (MoES), this study aims to evaluate a designed Business-Driven Reference Architecture for Big Data Analytics Implementation (BRABDAI) …

Data Communication Over Power-Lines: A Review On Technical, And Applications Challenges, Abdi Abdalla

Tanzania Journal of Engineering and Technology (TJET)

This paper presents a review study on the data communication over power-lines, commonly referred to as power-line carrier, power-line communication (PLC), mains communications, or power-line digital subscriber line (PDSL). This study examines the technical and application advantages and challenges associated with adopting PLC as a preferred alternative technology for wideband or broadband data communication. The broader coverage area of the PLC network gives it a distinct advantage over other communication network technologies. Additionally, implementing a communication system using the existing power-line network is more cost-effective and less time-consuming compared to constructing a new network from scratch. However, the primary challenge …

Assessment Of Web Security Vulnerabilities For Common Open Source Virtualization Software, Said Ally

Tanzania Journal of Engineering and Technology (TJET)

Open-source hypervisors have emerged as an integral technology for virtualizing server resources in cloud and data center computing. Hypervisor security efficiency is determined by virtual machine isolation, which is a de facto adoption factor in the selection process, as well as its ability to respond to web attacks. This paper assesses the security performance of Proxmox VE and XenServer for type 1 hypervisors, and Kernel Virtual Machine and Oracle Virtual Box for type 2 hypervisors. Security analysis was conducted using common exposures extracted from vulnerability databases and mapped against the OWASP 2013 and 2017 projects. For clarity, experiments were carried …

Investigations Of Cell Tower Antennas Parameters On Reduction Of Radio Frequency Radiation Levels From Radio Base Stations, Florence U. Rashidi

Tanzania Journal of Engineering and Technology (TJET)

The widespread deployment of mobile cellular base stations in populated areas has raised public health concerns due to increased exposure to radio frequency (RF) radiation emissions. Exposure to high levels of RF radiation can have potential thermal and non-thermal biological effects. Optimizing the configuration of cell tower antenna parameters is crucial for mitigating these radiation levels. This study therefore aims at systematically investigating the influence of different cell tower antenna parameters on reducing the RF radiation levels from mobile base stations. Field measurements were conducted at two cell sites shared by multiple mobile operators. Electric field strengths were measured at …

Comparison Of Meteorological Drought Indices In Tanzania Using The Meteorological Drought Monitoring Software Package, Paul Ts Limbu

Tanzania Journal of Engineering and Technology (TJET)

Low precipitation, substantial evaporation, and an unequal distribution of precipitation throughout the area are the characteristics of drought, a climatic abnormality. This study used the Meteorological Drought Monitoring (MDM) software and monthly rainfall data from the Tanzania Meteorological Authority (TMA) to examine and compare the Deciles Index (DI), Standardised Precipitation Index (SPI), Percent of Normal Index (PNI), Rainfall Anomaly Index (RAI), Z-Score Index (ZSI), China-Z Index (CZI), and Modified China-Z Index (MCZI) for drought monitoring in Tanzania from 1988 to 2017. It was found that ZSI represented the dry years better than other indices, followed by DI, RAI, PNI, SPI, …

Optimum Design Of Metallic And Plastic Cylindrical Gears Using Naturally-Inspired Algorithms: A Review, Marah Elsiedy, Hesham Hegazi, Ahmed Elkassas, Abdelhameed Zayed

Journal of Engineering Research

Abstract- Nowadays, several machinery and vehicles utilize mechanical elements which transmit power ranges from low, middle, and high levels depending on the type of equipment needed. Gears are the most influential design elements on any process during the running of a specific application, moreover engineers tried to obtain the optimality of a gear design which is a more compact, reliable- long service with simply operating features by following a systematic calculation of the mathematical model from standards and handbooks, however this process doesn't give the optimal design of the gears. Optimization techniques have been added to the design process for …

Optimization Of High-Bypass Turbofan High-Pressure Compressor Blade – A Case Study, Adeel Khalid, Vlad Mandzyuk

The Kennesaw Journal of Undergraduate Research

This research determines the relationship between the High-Pressure Compressor (HPC) rotor blade design variables and compressor pressure ratio of a high bypass turbofan engine. Alterations in the HPC blades span, chord, taper, twist, number, and angle of incidence are performed and their effect on the HPC pressure ratio is observed. The objective is to determine key parameters that could maximize the performance of a high-pressure compressor for a given mission. Physics-based modeling, Computational Fluid Dynamics (CFD), and wind-tunnel testing are performed to compare and validate findings. Physics-based modeling is performed to serve as the benchmark for data obtained through other …

Creativity, Craftsmanship, And Connection: Large-Format Sculpture Design, Jacqueline L. Puga, Gordon Hoople

The Transdisciplinary STEAM+ Journal

Artistry is a concept that is not usually explored in engineering yet is an invaluable skill that touches everything from product design to systems thinking. This past summer I developed conceptual designs for a large format sculpture that required connecting engineering knowledge with artistic vision. The initial phase required constant inspiration and creativity. The first step was to look at previous sculptures showcased throughout the world, such as at venues like “Burning Man,” to understand the possibilities or limitations of the space provided. Sketching varied and numerous ideas was essential in our design process. Next, we took our favorite ideas …

Launching A 3d Printing Program For Students: Recommendations And Best Practices For Libraries, Wilhelmina Randtke, Lee Bareford

Georgia Library Quarterly

The Georgia Southern University Libraries launched a 3D printing program for students in July 2022. Prior to launch, library employees at two of Georgia Southern University’s campuses investigated options for implementing safe, affordable, and sustainable 3D printing in existing academic libraries without retrofitting costly ventilation systems into existing facilities. This article describes the reasons why the Georgia Southern University Libraries thought that a 3D printing program could fulfill a service need for students across university colleges and departments and outlines some of the challenges, best practices, and unique innovations that the library’s employees experienced throughout the program launch process. The …

Full Body Harness Design Modifications And Evaluation: A Senior Design Project, Martin Mead, Jordan Von Seggern

The Journal of Undergraduate Research

Full-body harness (FBH) is critical for the safe operation of industrial and recreational activities, from installing and maintaining infrastructure such as wind turbines to ziplining and mountaintop adventures. However, harness design remains in the proprietary information of companies with limited technical information available for improvements or readjustments to specialized applications. As the outcome of the Capstone project, the paper focuses on multiple technical aspects and the engineering processes for designing FBH for ziplining recreational users, from selecting and testing materials for operation in cold weather to improvements in design and manufacturing for user comfort. The project is guided by technical …

On Blockchain Performance Enhancement: A Systematic Map Of Strategies Used, Anthony Kigombola

Tanzania Journal of Engineering and Technology (TJET)

Blockchain technology is one among the recent innovations in the computing industry. Blockchains have gathered a widespread interest in the industry mainly due to their security promise. Despite the anticipated benefits of Blockchains, there are several limitations which make the technology less suitable in large scale applications such as banking, one being low throughput. Several initiatives to improve the throughput of Blockchains are being tried out both in the academia and the business worlds but no systematic classification of the initiatives and the strategies used has been done. This study explores Blockchain performance improvement initiatives and classify the initiatives by …

28 Ghz Patch Antenna Array With Reduced Mutual Coupling For 5g Communications Systems, Rahabu F. Mwang’Amba, Hashimu Uledi Iddi

Tanzania Journal of Engineering and Technology (TJET)

A 28 GHz patch antenna array with reduced mutual coupling for 5G communication systems is presented in this paper. Two elements antenna array was simulated with a periodic boundary to represent an infinity array. The antenna array is attached with a pair of the coupled directional coupler with a coupling value of -3.47 dB, and transmission lengths of 3.40 mm and 7.62 mm depending on the antenna array's magnitude and phase coefficient were designed and simulated. A reduced mutual coupling of -31.86 dB compared to -10.75 dB for an array without a decoupling network was observed. The wide scanning angle …

Big Data Analytics Framework For Effective Higher Education Institutions, George Matto

Tanzania Journal of Engineering and Technology (TJET)

There has been an increased dependency on Information and Communication Technologies (ICTs) in undertaking various activities in Higher Education Institutions (HEIs) ecosystems. Because of that, huge volumes of data have increasingly been generated. There have been, for instance, considerable amounts of data generated through electronic platforms involved in students’ admission and registration process, students’ academic records management, teaching and learning data, curriculum related data, and several other administrative data. Analysis of data generated from these platforms stands to give students, lecturers, HEIs Management, policy makers and implementers, and other stakeholders useful insights that would help in improving HEIs’ effectiveness. Unfortunately, …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa

Tanzania Journal of Engineering and Technology (TJET)

Rising electricity bills as a result of climate variability and new home electrical and electronic appliances are becoming a major source of concern for most end users. Consumers are typically unaware of their household electricity consumption patterns and the costs associated with them, making proper planning and budgeting difficult. Monitoring and controlling energy consumption on appliances can reduce energy costs for end-users. The Internet of Things (IoT) has the potential to provide remote monitoring and control of devices via automated monitoring and control. In this study, we propose an IoT-enabled system for monitoring and controlling energy consumption in homes to …