Computer-Aided Engineering and Design Commons^™

Selfish Herd: Emergence Of Distributed Sensing, Timothy Mascal

Discovery Day - Daytona Beach

The problem of multi-agent swarm formation control seeks decision frameworks that exhibit desirable emergent behavior, including distributed sensing and communication, while remaining resilient to environmental noise. Previous work has demonstrated that the Selfish Herd Model is not only resilient to simulated sensor noise but performs better in its presence. This work further investigates the emergent behaviors of the Selfish Herd Model, particularly distributed sensing, by investigating whether the swarm achieves global stability equivalent to that observed in previous work utilizing global knowledge. A parameter variation study was performed across varying agent visual range and maximum neighbor count inputs to simulate …

Project Chimaera: Development Of A Tessellated Tetrahedral Truss Structure For Adaptive Multi-Regime Morphing Wing Technology, Evan Meyer, Eric Rodarte, Maximo Failla, Joshua Shuster, Jackson G. Schuler

Discovery Day - Daytona Beach

Project Chimaera: Physical Assembly of tessellated tetrahedral wing for Multi-Regime Flight. Modern Aircrafts lose aerodynamic efficiency because they are primarily made utilizing fixed wings which are designed for a single optimal flight condition. This forces an aircraft’s performance to become compromised across various speed maneuvers and flight regimes. Project Chimaera addresses this limitation through the development of a morphing wing capable of dynamically changing its geometry extensively during flight to allow an aircraft to travel between subsonic, supersonic, and hypersonic speeds. Whereas traditional wings rely on wing flaps and other flight controls; Project Chimaera addresses the limitation of flight controls …

Terramechanics-Based Comparison Of Dem And Crm For Lunar Surface Applications, Nicolas Bonasoro

Discovery Day - Daytona Beach

Understanding how lunar regolith interacts with robotic systems is important for safe surface operations because uncertain terrain conditions can affect rover traversability and lunar lander stability. This work applies terramechanics to two space robotics applications: in-situ cone penetration testing (CPT) for terrain assessment and lunar lander touchdown analysis for evaluating sinkage, force response, and stability. The study compares the Discrete Element Method (DEM), which resolves particle-scale interactions and captures detailed regolith behavior, with the Continuum Representation Method (CRM), which models soil response more efficiently and supports rigid CAD components such as lander footpads, legs, and body geometries. Current CPT results …

Greenwall Use For Air Repair And Depollution (G.U.A.R.D.), Sophia Elwood, Sophia Piro, Maura Barrada, Kathrine Lopez, Wendi Goffer

Discovery Day - Daytona Beach

Creating habitable indoor environments for long-duration space missions and extraterrestrial habitats requires reliable, sustainable air quality improvement. Embry-Riddle Aeronautical University’s ACE Lab provides a unique opportunity to investigate plant-based purification in a controlled environment while addressing campus air quality concerns linked to a high-traffic airport and exposure to jet fuel particulate matter and volatile organic compounds (VOCs). This collaborative project between Mechanical and Aerospace Engineering researchers and the Botanical Society evaluates whether a green wall can improve indoor air quality as a scalable model for future closed-loop habitats. In the study's first phase, student researchers documented ACE Lab dimensions to …

Cast In Steel: Horseman's Axe, Sam A. Morris

Create@State

Cast in Steel is a competition between universities across North America started by the Steel Founders Society of America. The competition is centered around giving students the opportunity to learn about casting and the steel industry in general. A prompt of a weapon or tool with some level of historical significance is given to all the teams. The prompt for the 2026 Arkansas State University team, was a Horseman’s Axe. The team designed their rendition of a horseman’s axe, worked with Southern Cast Products as their local industry parter, and fabricated a finished axe to represent Arkansas State University as …

Wind Tunnel Instrumentation And Testing, Nicholas Marek, Abraham Mezera, Laura Jin, Hayden Smith, Curtis Cook

Student Scholar Symposium

The Raymond B. Jones College of Engineering was contacted by an automotive engineering firm seeking to use the college’s wind tunnel for gathering data on the aerodynamic performance of a proprietary prototype automotive door. Specifically, the client requested the quantification of the drag coefficient of the model at extreme wind speeds. The drag coefficient, a dimensionless number that quantifies the resistance of a specific geometric shape to airflow, will be a valuable datapoint for the client’s design iteration. Due to the sensitive nature of their work, the client has wished to remain anonymous. RBJCOE professors tasked a senior design team …

Semi-Autonomous Trash Bot, Ben Leon, Ethan Mashburn, Connor Olivera, Dillon Michael Wood

ATU Scholars Symposium

Title: Semi-Autonomous Trash Robot

Authors: Benjamin Leon, Ethan Mashburn, Connor Olivera, Dillon Wood

Abstract: Environmental pollution is becoming more worrying every day as megatons of human waste persist in vast amounts in our ecosystems. The existing waste collection methodologies, with the labor, time, and cost components combined, make the process cumbersome. A potential solution could be an automated waste collection robot that incorporates AI into a cheap system that autonomously detects trash. This report proposes a machine that may be manufactured to adequate standards in terms of size and cost and deployed in various environments, with the ultimate goal of …

40 - Design, Fabrication, And Installation Of Morphing Control Surfaces For Small-Scale Uas, Kyle Purser

Undergraduate Research Symposium

Morphing control surface technology, inspired by organic structures and compliant mechanisms, offers significant potential for enhancing the aerodynamic efficiency and performance of unmanned aerial systems (UAS). Despite these benefits, its adoption has been hindered by complexities in design, manufacturing, and installation, particularly when compared to traditional flap systems. This research explores the design, fabrication, and integration of morphing control surfaces for small-scale UAS using additive manufacturing techniques. To reduce costs and streamline the design process, fused deposition modeling (FDM) additive manufacturing was employed for component fabrication. An off-the-shelf Horizon Sport Cub S2 served as the testing platform, modified with a …

Dynamic Angle Of Repose Of Ss316l Powders Fabricated By Gas Atomization For Additive Manufacturing Applications, S. M. Mahid

Student Research Symposium

Metal additive manufacturing (AM) techniques, unlike conventional manufacturing methods like turning and milling, construct objects by incrementally adding layers of material. Various processes can be used to 3D print including laser or electron beams to melt or sinter metallic powder particles.

Controlled Radiation Capsule For Precision And Rapid Cancer Treatment, Hoseon Lee, Zsolt Kollar, Bailey R. White, Junia Nguyen, David Roque, Sowjanya Palagani

Symposium of Student Scholars

This research aims to transform cancer treatment through the optimization of brachytherapy, with a focus on reducing treatment duration, setup complexities, and financial burdens, all while emphasizing patient safety. Patients living at a distance from radiation clinics, particularly those undergoing extended Low Dose Radiation brachytherapy, often struggle with the formidable financial challenges associated with securing nearby accommodations. In response to these issues, the research introduces a radiation capsule designed to condense the conventional six-month treatment period to approximately just one week, thereby significantly reducing the duration of required accommodations. This capsule is especially relevant considering the construction cost of $40 …

Kwad - Ksu All Weather Autonomous Drone, Nick Farinacci, Sebastian Gomez, Stewart Baker, Ed Sheridan

Symposium of Student Scholars

"KWAD" or "KSU all-Weather Autonomous Drone" project was sponsored by Ultool, LLC to the KSU Research and Service Foundation to create a lightweight drone capable of capturing HD video during all-weather operations. The conditions of all-weather operation include rainfall of one inch per hour and wind speeds of up to twenty miles per hour. In addition, a global minimum structural safety factor of two is required to ensure the system's integrity in extreme weather conditions. Potential mission profiles include autonomous aerial delivery, topological mapping in high moisture areas, security surveillance, search and rescue operations, emergency transportation of medical supplies, and …

Damage Identification In 3d Printed Metal Parts Using Deep Learning, Romaine Byfield, Alireza Modir, Ibrahim Tansel, Raniero Plaza

Florida Conference on Recent Advances in Robotics

An active Structural Health Monitoring (SHM) method called Surface Response to Excitation (SuRE), is used in this study to detect and quantify the damages created by a milling operation on additively manufactured metal plates. This method entails bonding two piezoelectric disks to the test specimens, one to excite it with surface waves from one end of the plate, and the other to sense the dynamic response to excitation at the other end. A sweep sine wave with a duration of 1 ms, ranging from 50-120 kHz is used as the excitation signal. Five stainless steel plates of identical size (195×54×2.5 …

The Aerocap Aerodynamic Attachment For Pickup Trucks, Andrew J. Tucker, David Silk

ATU Scholars Symposium

As the pickup truck continuously becomes more popular in both commercial and family applications, the fuel efficiency of modern pickup design should be brought into question. According to CBS News, pickup trucks accounted for around 20% of all new vehicles sold in America in 2022, with the three most popular vehicles sold during the year all being pickups. However, these vehicles consistently have higher drag coefficients than other types of vehicles, namely sedans or crossovers. This leads to decreased fuel economy and more overall greenhouse gas emissions. Even in the case of an electric pickup truck, the high drag coefficient …

Session 2: The Effect Of Boom Leveling On Spray Dispersion, Travis A. Burgers, Miguel Bustamante, Juan F. Vivanco

SDSU Data Science Symposium

Self-propelled sprayers are commonly used in agriculture to disperse agrichemicals. These sprayers commonly have two boom wings with dozens of nozzles that disperse the chemicals. Automatic boom height systems reduce the variability of agricultural sprayer boom height, which is important to reduce uneven spray dispersion if the boom is not at the target height.

A computational model was created to simulate the spray dispersion under the following conditions: a) one stationary nozzle based on the measured spray pattern from one nozzle, b) one stationary model due to an angled boom, c) superposition of multiple stationary nozzles due an angled boom, …

Optimal Design Of Bacterial Carpets For Fluid Pumping, Minghao W. Rostami, Weifan Liu, Amy Buchmann, Eva Strawbridge, Longhua Zhao

Biology and Medicine Through Mathematics Conference

No abstract provided.

Development Of A Compliant Gripper Driven By 3 Dof Soft Robot, Derek M. Price Ii, Ricardo Ramirez, Pt Angel Tran

Symposium of Student Scholars

Industrial robots are moving toward automation, which makes it increasingly necessary to replace the functions traditionally performed by humans with robotics. Pick and place operation is a prime example of such automation. Robots that pick up and place objects mimic the human action of picking an object up and placing it in a targeted location. It has led to the development of robotic end-effectors that have a human-like feel. Grippers can be articulated in various ways depending on their application area and well-defined desired tasks. As compliant and soft links deflect more under the same load than their rigid body …

Novel Thermal Coating For High-Speed Airplanes, Abinash Satapathy, Lakshay Battu, Liam Watson, Nazanin Rajabi

Symposium of Student Scholars

In comparison to various other materials, Carbon Fiber, specifically Carbon Fiber Reinforced Polymers (CFRP), is pre-eminent amongst other materials for use on aeronautical systems. Due to its high specific strength (strength-to-weight ratio), CFRP is prominent for carrying heavy loads while maintaining a lightweight build. However, when influenced by heat resulting from air resistance, CFRP is known to undergo serious degradation that would significantly decrease the effectiveness of the polymers. To prevent this degradation and maintain the strength of the CFRP, thermal protective layers (TPLs) are designed to shield the CFRP from heat exposure. This research is focused on the examination …

Machine Learning-Oriented Predictive Maintenance (Pdm) Framework For Autonomous Vehicles (Avs): Adopting Blockchain For Pdm Solution, Md Jobair Hossain Faruk, Hossain Shahriar, Maria Valero

Symposium of Student Scholars

Autonomous Vehicles (AVs) refers to smart, connected and multimedia cars with technological megatrends of the fourth industrial revolution (Industry 4.0) and have gained huge strive in today's world. AVs adopt automated driving systems (ADS) technique that permits the vehicle to manage and control driving points without human drivers by utilizing advanced equipment including a combination of sensors, controllers, onboard computers, actuators, algorithms, and advanced software embedded in the different parts of the vehicle. These advanced sensors provide unique inputs to the ADS to generate a path from point A to point B. Ensuring the safety of sensors by limiting maintenance …

Design And Development Of A Novel Soft Gripper Manipulated By A Robotic Arm, Derek Price

Symposium of Student Scholars

This study presents the design and development of a tendon-driven soft gripper manipulated by a 4 DOF robotic arm. The proposed robotic arm and the gripper explore the new areas focusing on increasing the grasping performance of the gripper as well as the workspace. The gripper is designed as a 3 finger and driven by tendons using two servo motors. The tension of the strings is adjusted using a pulley mechanism and a string. The opening and grasping of the soft gripper are accomplished by each motor. The wide opening allows the gripper to grasp wide objects. The parallel robotic …

Atomistic Simulation Of Desalination, Ian David Durr

Symposium of Student Scholars

Atomistic Simulation of Desalination

Ian Durr, Matheus Prates, and Jungkyu Park

Kennesaw State University

In this research, we investigate the desalination capacity of three-dimensional (3D) carbon nanostructures using molecular dynamics simulations. 3D carbon nanostructures proposed here will filter seawater efficiently because of their multiple layers with holes of tunable sizes. The structure is designed to be flexible, allowing mechanical deformation during daily use. The 3D carbon nanostructure will still possess high thermal conductivity, enabling easy recycle through a simple heating process. Here, we employ LAMMPS, Large-scale Atomic/MolecularMassively Parallel Simulator distributed by Sandia National Laboratories to measure salt ion flux through …

Using Comprehensive Finite Element Analysis To Simulate A Special Connection In Post-Tensioned Concrete, Joshuah Leljedal

Symposium of Student Scholars

Finite element analysis (FEA) uses differential equations to determine a computer-based solution that explains interactive behaviors within models of complex structural and mechanical systems, subjected to various loading and environmental conditions. Those systems are partitioned into finite elements consisting of a linear mesh with nodes at each end point, and FEA determines relationships, such as force-displacement, between each of the finite elements. This apportioned model allows systems to be evaluated under multiple loading scenarios. Computer-based FEA offers significant benefits that reduce cost and the time required to perform alternative analysis for complex structural systems. In this research project, a comprehensive …

Husky Hand: A Low-Cost Electro-Mechanical Prosthetic Arm For The Underprivileged, Adam Robert

Thinking Matters Symposium

A continuation of a low-cost prosthetic upper limb prototype design which was investigated in EGN 301. The prosthetic is specifically designed for the needs and requirements of under privileged individuals in the Dominican Republic with upper limb amputations. The project focuses on the creation of an open-source computer aided prosthetic hand/arm model. The design allows consumer-grade fused filament fabrication (FFF) 3-D printers to be used. The improved design allows for the integration of the PQ-12 linear actuator for grasp and finger control. This simplifies the assembly, while, also reducing the size and mass of the whole unit. Producing a low-cost …

Sedan Performance/Economy Rear Diffuser, Jacob Boucher Koris

Thinking Matters Symposium

This project consists of designing in SolidWorks a model of the performance/fuel economy diffuser. The design is modeled with an Ahmed body (recommended shape for CFD testing vehicles) and the diffuser will be applied to the bottom of the rear bumper of the car. After this is done the model will be imported into ANSYS for CFD testing. Testing entails importing the model, then creating a mesh around the model, and then setting up the program to run analysis for calculating the coefficient of drag. Then building this SolidWorks model as a full working prototype for actual road-testing purposes. With …

Graphs And Cad: Analyzing The Experience Of A Mechanical Engineering Intern, Matthew Des Biens

Celebration of Learning

A reflection on the experiences of a mechanical engineering intern at Bergstrom Inc., this presentation, by Senior Matt Des Biens, will discuss what it was like working for a manufacturing and design company making HVAC units for large customers across the world. The highlights will be on the projects he worked on, the things that he learned, and his views on working for the company as a whole.

Developing And Testing Of An Upper Limb Exoskeleton For Stroke Patients, Drew Dudley, David Salazar

UNO Student Research and Creative Activity Fair

Objective: The main objective of this study was to determine functional and neuromuscular outcomes of stroke patients using their non-preferred hand with and without a 3D printed passive exoskeleton compared to controls using their non-preferred hand with and without the passive exoskeleton. Methods: Adults at least six months post stroke (Stroke, n = 5) and age- and sex- matched healthy controls (Control, n = 5) performed nine trials of a gross motor task while having their brain activity measured. The Fugl-Meyer and “Box and Block” test was used to measure the gross dexterity of the subjects with and without the …

Purdue Air Sense: A Methodology For Improving The Accuracy Of Ambient Aerosol Mass Concentration And Size Distribution Measurement With Low-Cost Optical Sensing Techniques, Rishabh Ramsisaria, Satya Sundar Patra, Brandon Emil Boor

The Summer Undergraduate Research Fellowship (SURF) Symposium

There is a global lack of a means for monitoring air pollutant levels at a local level due to expensive and bulky instrument requirements. It is important to monitor toxic gas levels, as well as particulate matter levels, in the atmosphere to study their effects on human health and to further develop city- and community-level air pollution solutions. In this study, with the means of a Raspberry Pi, low-cost Alphasense Optical Particle Counter and gas sensors, and methodical calibration techniques, we built a portable 3-D printed module powered by clean electricity generated by an on-board Voltaic solar cell that measures …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Design Of A Test-Rig For Gerotor Pump, Weijin Qiu, Andrea Vacca, Matteo Pellegri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Gerotor pumps are a kind of fluid power machines widely used in the automotive field, especially for fuel injection as well as lubrication. To improve the performance of these units, virtual prototyping is necessary to decrease time and cost related to trial and error. Within this research a simulation model for Gerotor units has been developed with the aim of predicting accurately the performance of a generic unit. The model can accurately predict the system behavior regarding mechanical and volumetric losses by considering real machining tolerances and their interactions. Ultimately, this model should help to design new generations of Gerotor …

Ani-Bot: A Mixed-Reality Ready Modular Robotics System, Zhuangying Xu, Yuanzhi Cao

The Summer Undergraduate Research Fellowship (SURF) Symposium

DIY modular robotics has always had a strong appeal to makers and designers; being able to quickly design, build, and animate their own robots opens the possibility of bringing imaginations to life. However, current interfaces to control and program the DIY robot either lacks connection and consistency between the users and target (Graphical User Interface) or suffers from limited control capabilities due to the lack of versatility and functionality (Tangible User interface). We present Ani-Bot, a modular robotics system that allows users to construct Do-It-Yourself (DIY) robots and use mixed-reality approach to interact with them instantly. Ani-Bot enables novel user …

Development Of Portable Hyperspectral Imaging Device, Chenxi Li, Youngkee Jung, Iyll-Joon Doh, Euiwon Bae

The Summer Undergraduate Research Fellowship (SURF) Symposium

Most of the conventional hyperspectral imaging devices require sophisticated optical components, occupy a large footprint, and requires an initial capital investment for laboratories which mostly suits for laboratories benchtop system. The requirement of shipping the sample and waiting an extended period of time to get the results are the main downsides of this traditional approach. Capitalize in many specific field applications and diagnosis, portable devices provide both convenience and on-site results which are desirable for government agencies and food safety inspectors. This project was aimed to develop a low-cost, portable hyperspectral device for food safety applications. A smartphone was used …