Computer-Aided Engineering and Design Commons^™

Locomotion And Balance Control In A Biped Robot With Continuum Legs And A Kangaroo-Inspired Tail, Gavin A. Platt

All Theses

This thesis work presents the design, testing, and validation of a continuum-legged biped robot equipped with a kangaroo inspired tail for enhanced stability and adaptability. Unlike traditional rigid link robots, this one expands on soft-legged robots and utilizes tendon-driven continuum robots to mimic octopus and kangaroo behavior for locomotion. The robot uses a hierarchical hybrid control framework to implement walking, obstacle avoidance, vaulting, and push recovery behaviors. To test the performance of the robot four sets of experiments were conducted to validate these systems and evaluate how they performed. The results demonstrate stable walking with rhythmic tail load transfer, effective …

Experimental And Numerical Study On The Influence Of Carbon Fiber Reinforcement On The In-Plane Compressive Properties Of 3d Printed Hexagonal Honeycomb Core Structures, Deon Wallace

All Theses

There is difficulty with numerically replicating the behavior of composite honeycomb core structures numerically due to the trouble of gathering material properties from a hollow structure. Also, complex part geometries and carbon fiber reinforcement strategies can lead to unwanted structural weaknesses and variance in material properties that may not be reflected in numerical analysis when the part is additively manufactured. In this study, edgewise compressive testing is used to characterize the mechanical behavior and performance characteristics of these structures. The experimental results indicate an increase in the Young’s moduli of the honeycomb core structures as carbon fiber concentration increases. However, …

Tradespace Exploration For Multiple Collaborative Vehicles, Mrunal Deshmukh

All Theses

Modern military operations demand systems that adapt to uncertain, rapidly changing missions across diverse terrains. Traditional single-platform vehicle design is insufficient for such complexity. This research introduces a hierarchical tradespace exploration framework for designing and evaluating families of heterogeneous ground vehicles under a System-of-Systems (SoS) architecture. The framework treats vehicle design as a co-optimization problem, where a “parent” vehicle (e.g., a Squad Multipurpose Equipment Transport) coordinates specialized “child” vehicles for reconnaissance, amphibious tasks, terrain traversal, and stealth missions. Unlike conventional approaches that optimize vehicles individually, this study emphasizes collaborative performance, resource sharing, and adaptability at the family level. Central to …

Development Of A Homogenized Material Model For Carbon Fiber–Aluminum Transition Joints Using Fea And Optimization, Nicholas M. Couch

All Theses

The integration of metals and composites in automotive structures improves manufacturability and overall structural performance. The proposed Ultrasonic Additive Manufacturing (UAM) joint provides a promising solution for joining aluminum and carbon fiber; however, modeling its behavior across an entire vehicle can be computationally expensive. To address this challenge, a homogenized material card is developed to efficiently capture the joint’s mechanical response while maintaining computational efficiency. A novel characterization method is implemented, employing implicit simulations and optimization techniques to determine the effective material properties of the UAM transition joint. This approach enables rapid iteration of material parameters, facilitating the efficient evaluation …

Cloud-Native Mucad For Design Reviews, Emily C. Petty

All Theses

This research explores the potential of a cloud-native multi-user computer-aided design (MUCAD) system to improve communication and efficiency during engineering design reviews and shorten the design timeline for military tools. First, a literature review is used to generate a list of thirty-five collaboration-oriented requirements that aim to ensure concurrency, annotations, heterogeneity, security, IP protection, version control, and viewing within a MUCAD system. A comparative evaluation of existing collaborative CAD system architectures, including cloud-native, cloud-enabled, and a single-user system with external file sharing, is conducted to determine how well each system architecture fulfills the generated collaboration-oriented requirements. Following this, a survey …

Tradespace Exploration With Statistical Modeling Techniques And Immersive Visual Representation In Virtual Environments, Nikhil Raj

All Theses

Statistical modeling techniques combined with virtual reality (VR) visualization offer powerful new approaches to tradespace exploration in engineering design. The research presented addresses the challenge of analyzing and communicating insights from complex multidimensional datasets, particularly for autonomous ground vehicle systems.

Beginning with a review of statistical methods—including Principal Component Analysis (PCA), Analysis of Variance (ANOVA), and correlation analysis—the study examines their applications in tradespace exploration. Building on this foundation, three distinct visualization pathways connecting MATLAB data to virtual environments are developed and evaluated: VRML representation, STL conversion, and Blender integration. Each approach is assessed for its ability to maintain data …

Investigation Of Plm Utilities And Concepts In Engineering Curriculum: Challenges And Opportunities, Frederick Rowell

All Theses

The implementation of Product Lifecycle Management (PLM) tools and concepts in engineering education has gained increasing significance as manufacturing and engineering industry shifts towards digital engineering workflows to enhance collaboration, efficiency, and innovation. Despite its typical application in engineering industries, many mechanical engineering programs have not integrated PLM software into their curriculums. The Product Lifecycle Management Center (PLMC) at Clemson University offers PLM workshops and research opportunities to students. Despite these initiatives, PLM education remains largely extracurricular and is not fully incorporated into required coursework within the mechanical engineering curriculum. The objective of this thesis is to explore the role …

Reinforcement Learning For High-Dimensional Tradespace Exploration In Multi-Objective Optimization, Aaditya Kothavade

All Theses

Engineering design optimization often requires balancing multiple competing objectives while navigating complex, high-dimensional tradespaces. Despite significant advances in tradespace exploration techniques, current methods face critical challenges in efficiently navigating high-dimensional design spaces. As the number of design variables and competing objectives increases, traditional multi-criteria decision-making and optimization methods struggle to explore the vast solution space comprehensively. The curse of dimensionality exacerbates this issue, making it impractical to analyze all possible solutions and effectively identify trade-offs between objectives. Additionally, the computational complexity of high-dimensional spaces further complicates optimization, making exhaustive solution analysis infeasible. Traditional multi-objective optimization methods rely on static Pareto-front …

Developing Reduced Order Models For Gas Bubble Formation In Irradiated Metals Using Integrated Phase Field Modeling And Koopman Operator Theory, John M. Eggemeyer V

All Theses

Irradiation damage in materials is prevalent in nuclear components, posing significant risks in the safety and reliability of nuclear reactors. Phase field models offer a versatile framework for modeling irradiation damage in materials at mesoscales. Such high fidelity method has been used to model the formation of fission gas bubbles superlattice, a microstructure array occurs at certain irradiation conditions (dose, dose-rate, and temperature). To overcome the high computational cost of phase field modeling, Koopman operator theory is applied to create reduced order models, allowing for instantaneous simulations of fission gas bubble behaviors. These low fidelity models are integrated into machine …

Defining Fidelity For Tradespace Application, Aditya Agrawal

All Theses

This research proposes a definition of tradespace fidelity and presents a study on its effectiveness in the tradespace. Tradespace exploration helps evaluate various design options, allowing engineers to make informed decisions in early design stages. Fidelity generally refers to how closely a model approximates reality. However, the definition of fidelity has been inconsistently defined and interpreted in various contexts concerning particular problems. In some cases, it is a measure of accuracy; in others, information; in another, uncertainty; and in others, computational complexity. Fidelity is poorly and inconsistently defined in the literature. In general, higher fidelity models tend to be more …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Investigating Challenges Of Converting Cad Models To Game Ready Assets, Vathsa Pawar

All Theses

This thesis explores the challenges associated with converting detailed CAD models into game-ready assets optimized for use in virtual reality (VR) environments using game engines, focusing on enhancing using mechanical engineering models. The primary goal is to establish a toolchain that allows the integration of CAD models into game engines for immersive applications, enabling engineers and stakeholders to interact with 3D models in a synthetic environment. The study employs several test cases ranging from simple door models to complex automotive vehicle prototypes, elaborating the process of exporting CAD models through intermediate formats (such as STEP, STL, GLB) using tools like …

Developing An Assessment Tool For Ideation Effectiveness: A Survey-Based Approach For The Shah’S Method Of Design Space Exploration, Venkat Jaya Deep Jakka

All Theses

The research is focused on creativity in engineering design. The goal is to understand if creativity in engineering design can be assessed using a less resource-intensive approach, specifically a survey, compared to design exercises. The survey builds on the metrics established by Shah and colleagues. The four metrics are Novelty, Quality, Variety and Quantity. The metrics are measured with the help of a design activity that is deployed to the participants. These metrics have been used in comparative analysis to assess treatments such as new design methods and personality types. However, the downside of the metrics is that they require …

Digital Twin In Military Ground Vehicles: Design And Predictive Maintenance, Conner W. Eddy

All Theses

Digital twin technology builds upon virtual engineering models, computer simulation, and real-time field data streaming to enable next-generation designs and predictive maintenance. A digital twin is a computer-based high-fidelity collection of models that predicts the performance of dynamic systems per operating cycles, input feature parameters, and data communication from a physical plant. Product Lifecycle Management (PLM) is growing in importance and is central to virtual design processes where the digital twin toolset fits into this emerging architecture. The product design process can be advanced using digital twin resources by eliminating the need for, and cost from, continual physical prototyping, reliability …

Finite Element Analysis On Laser Sintering Of Ceramic Materials, Shardul Sharma

All Theses

Laser sintering of ceramics plays a vital role in advanced additive manufacturing due to its precise fabrication of complex ceramic structures, localized heating and microstructural control. It allows the production of complex and customized ceramic parts for applications such as the aerospace industry and biomedical devices. However, due to the high thermal gradients produced during the process, laser sintering technology faces fundamental challenges, such as thermal stresses and crack formation. Establishing a valid numerical model to guide the ceramic laser sintering process, which predicts the thermal and mechanical behavior of the component, is necessary.

In this work, the modified Skorohod-Olevsky …

Influence Of Swirl And Turbulence In The Particle Removal Using Fog In A Pipe Flow, Nisarg T. Patel

All Theses

Fog-and-tube scrubbers are employed to remove harmful ultrafine aerosols, such as Diesel particulate matter (DPM), from an airflow. The underlying principle of this removal process involves enlarging the aerosol particles by coagulating them with fog drops, which are subsequently eliminated through inertial impaction onto the tube wall. Previous research conducted by Tabor et al. (2021) demonstrated an increase in scavenging of ultrafine DPM particles, ranging from 11.5 nm to 154 nm, by as large as 45% over the no fog case. This finding is crucial in addressing the challenges associated with conventional filtration methods for capturing ultrafine particles.

The present …

Using Immersive Technology To Improve Mechanical Design: Use Cases, A Review Of Current Technology, And An Experiment In Requirement Elicitation In Virtual Reality, William Hawthorne

All Theses

There has been a growing trend in the use of immersive technologies within engineering design. This research is focused on understanding how Virtual Reality (VR) technologies support design reviews. Modern tools including virtual reality hardware and software were tested for current capabilities and challenges. In a review of literature, two key gaps are identified: the rapid advancements of VR and AR technology and limited formal studies to determine the costs and benefits of immersive technology within engineering design reviews. This research has resulted in three key outcomes. First, use cases of immersive reality technologies are identified, through the lens of …

Computational Tradespace Exploration, Analysis, And Decision-Making: A Proposed Framework For Organizational Self-Assessment, Julia Daniels

All Theses

The ability to assess technical feasibility, project risk, technical readiness, and realistic performance expectations in early-phase conceptual design is a challenging mission-critical task for large procurement projects. At present, there is not a well-defined framework for evaluating current practices of organizations performing computational trade studies. One such organization is the US Army Ground Vehicle Systems Center (GVSC). When defining requirements and priorities for the next-generation autonomy-enabled ground vehicle system, GVSC is faced with the challenge of an increasingly complex programmatic tradespace due to emerging complexities of ground vehicle systems. This thesis aims to document and evaluate tradespace processes, methods, and …

Soft Robotic Arms For Fall Mitigation: Design, Control And Evaluation, Param Malhotra

All Theses

Most fall mitigation devices present a heavy system that avoid injuries to the user by preventing the impact of a fall. They are dependent on the user capability or on the probability that the user falls in the assumed manner the system was designed for. Often that is not the case, hence this project initiates a novel concept of using soft robotic arms to prevent falls from happening in the first place itself and save the user from any injuries. This thesis describes the prototype and development of a soft continuum robotic backpack system. The system can validate its use …

Quantifying Shear Stresses In Tissue Engineered Aortic Heart Valves, Raj Nitin Dave

All Theses

Present heart valve prosthesis have limitations such as capability to grow, repair and remodel post implantation. Tissue engineering offers to be a promising alternative to overcome these limitations. Maturation of seeded human cells on the valve subjected to favorable growth conditions in the bioreactor is critical to the success of tissue engineered heart valves. Mechanical stress and strain which results from the pressure and flow conditions in the bioreactor plays a critical role on the developing valve tissue and are currently unknown. The goal of this research is to relate the magnitude of wall shear stress (WSS) within the heart …

Predictive Performance And Teaming Via The Mist-C Ocean Hierarchy Utilizing Personality And Skills, Brighton H. Owen

All Theses

This thesis seeks to establish and define the individual, the team as an entity, and qualify various metrics to predict team performance. When several individuals come together, they form a team that is often capable of designing and developing concepts beyond the individual on their own by methods of task dispersion, goal orientation, communication, and more. With these teams comes growth and increased performance leading to more efficient processes and better metrics by which performance may be measured. To achieve this, 34 engineering students in the AerosPACE senior design program, which lasted two semesters, were asked to complete surveys in …

Product Lifecycle Management - Application Of Patterning Methods To Gas Turbine Blades And Creation Of Learning Materials, David Procopio

All Theses

To compete in the global marketplace, companies need to embrace virtual design and manufacturing methods. Product Lifecycle Management (PLM) embodies both the workflow processes and tools to bring forth products from conception to design to fabrication to service to decommissioning, and to eventual recycling. In response to the growing demand for engineers and technicians with these critical skills, colleges and universities should introduce these virtual tools through seminars, software workshops, and computer laboratory sessions. Some of the opportunities in the PLM Center at Clemson University include short courses on PLM practices, focused software training sessions, hands-on exploration activities, and research …

Design And Fabrication Of A Polymer Fdm Printer Capable Of Build Parameter Monitoring And In-Sit Geometric Monitoring Via Photogrammetry, Travis Roberts

All Theses

Additive manufacturing, or 3D printing, is a complex process that creates free-form geometric objects by sequentially placing material in a location to construct an object, usually as a layer-by-layer process. One of the most widespread methods is Fused Deposition Modeling (FDM). FDM is used in many of the consumer-grade polymer 3D printers available today. While consumer grade machines are cheap and plentiful, they lack many of the features desired in a machine used for research purposes and are often closed-source platforms. Commercial-grade models are more expensive and are also usually closed-source platforms that do not offer flexibility for modifications often …

A Manufacturing-To-Response Pathway For Formed Carbon Fiber Reinforced Polymer Composite Structures, Madhura Limaye

All Theses

Over the past decade, there has been an increased adoption of thermoplastic and thermoset based continuous carbon fiber reinforced polymer (CFRP) composites for structural applications in several industries. Among the different manufacturing methods, thermoforming process for thermoplastic based continuous CFRP’s offer a major advantage in reducing cycle times for large scale productions. Similarly, out-of-autoclave curing process for thermoset based continuous CFRP’s using heated tooling enables production of large composite structures. However, these manufacturing processes can have a significant impact on the structural performance of parts by inducing undesirable effects. These effects include inhomogeneous fiber orientations, thickness variations, and residual stresses …