Computer-Aided Engineering and Design Commons^™

Seamless Bridge And Roadway System For The U.S. Practice, Nima Ala

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Expansion joints are one of the main causes for high maintenance costs in bridges. The search for ideal expansion joints has proven fruitless. That is why it has been said that “the best joint is no joint”. A seamless bridge system is envisioned that results in bridges with long service lives by eliminating the joints over the entire length of the bridge, approach slab and a segment of the roadway called transition. All bridge thermal movements are dissipated to zero in the transition. The system is similar to a system developed in Australia but modifications had to be made to …

Optimization And Modeling Tools For Telescope Hexapod Structures, Michael Edward Feeney

Master's Theses

Hexapod trusses are an important element in many mechanical design systems. The natural frequency and stiffness behavior under geometric and mass variations of such structures is largely undocumented. Furthermore, the ability to quickly model hexapod designs and explore a large design-space in finite element software packages is, in general, time consuming and inefficient. The purpose of this project was to develop software tools that made design-space exploration (modeling and simulation processes) for hexapod structures drastically more efficient. Secondly, the project included an experimental analysis portion to demonstrate the various modal study techniques and to validate finite element analysis predictions. Lastly, …

Reliability Estimation Of Complex Numerical Problems Using Modified Conditional Expectation Method, Christopher D. Eamon, Bulakorn Charumas

Civil and Environmental Engineering Faculty Research Publications

A simulation-based structural reliability analysis method is presented. It is intended as an alternate approach to estimate reliability for problems for which most-probable point of failure methods fail and when computational resources are limited. The proposed method combines conditional expectation and estimating the PDF or CDF of a selected portion of the limit state. In the proposed approach, complex limit state functions are simplified to two random variable problems. The success of the simplification depends on the quality of the CDF estimate. Results indicate that the method may provide accurate and efficient solutions for some difficult reliability problems.

Integrated Reliability And Sizing Optimization Of A Large Composite Structure, Christopher D. Eamon, Masoud Rais-Rohani

Civil and Environmental Engineering Faculty Research Publications

In this paper, we present the application of probabilistic design modeling and reliability-based design optimization (RBDO) methodology to the sizing optimization of a composite advanced submarine sail structure under parametric uncertainty. With the help of probabilistic sensitivity analysis, the influence of individual random variables on each structural failure mode is examined, and the critical modes are treated as probabilistic design constraints under consistent lower bounds on the corresponding reliability indices. Whereas the failure modes are applied to structural components in the solution of the RBDO problem, the overall system reliability is also evaluated as a post-optimization step. The results indicate …

Reliability Of Concrete Masonry Unit Walls Subjected To Explosive Loads, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

This study discuses the development of a procedure that can be used to assess the reliability of concrete masonry unit infill walls subjected to personnel-delivered blast loads. Consideration is given to maintain reasonable computational effort for both the structural analysis and reliability models. Blast load and wall resistance models are developed based on experimental and analytical data, and resistance is evaluated with a large strain, large displacement transient dynamic finite element analysis. A sensitivity analysis is conducted to identify significant random variables and a reliability analysis conducted with a feasible level of computational effort. Reliability indices are estimated for two …

Reliability-Based Optimization Of Fiber-Reinforced Polymer Composite Bridge Deck Panels, Michel D. Thompson, Christopher D. Eamon, Masoud Rais-Rohani

Civil and Environmental Engineering Faculty Research Publications

A reliability-based optimization (RBO) procedure is developed and applied to minimize the weight of eight fiber-reinforced polymer composite bridge deck panel configurations. The method utilizes interlinked finite element, optimization, and reliability analysis procedures to solve the weight minimization problem with a deterministic strength constraint and two probabilistic deflection constraints. Panels are composed of an upper face plate, lower face plate, and a grid of interior stiffeners. Different panel depths and stiffener layouts are considered. Sensitivity analyses are conducted to identify significant design and random variables. Optimization design variables are panel component ply thicknesses while random variables include load and material …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Evaluation Of Accuracy And Efficiency Of Some Simulation And Sampling Methods In Structural Reliability Analysis, Christopher D. Eamon, Michel D. Thompson, Zhenyu Liu

Civil and Environmental Engineering Faculty Research Publications

Numerous simulation and sampling methods can be used to estimate reliability index or failure probability. Some point sampling methods require only a fraction of the computational effort of direct simulation methods. For many of these methods, however, it is not clear what trade-offs in terms of accuracy, precision, and computational effort can be expected, nor for which types of functions they are most suited. This study uses nine procedures to estimate failure probability and reliability index of approximately 200 limit state functions with characteristics common in structural reliability problems. The effects of function linearity, type of random variable distribution, variance, …

Effect Of Edge-Stiffening And Diaphragms On The Reliability Of Bridge Girders, Christopher D. Eamon, Andrzej S. Nowak

Civil and Environmental Engineering Faculty Research Publications

Secondary elements such as barriers, sidewalks, and diaphragms may affect the distribution of live load to bridge girders. The objective of this study is to evaluate their effect on girder reliability if these elements are designed to be sufficiently attached to the bridge so as not to detach under traffic live loads. Simple span, two lane structures are considered, with composite steel girders supporting a reinforced concrete deck. Several representative structures are selected, with various configurations of barriers, sidewalks and diaphragms. Bridge analysis is performed using a finite element procedure. Load and resistance parameters are treated as random variables. Random …

Modeling Concrete Masonry Walls Subjected To Explosive Loads, Christopher D. Eamon, James T. Baylot, James L. O'Daniel

Civil and Environmental Engineering Faculty Research Publications

Concrete masonry unit walls subjected to blast pressure were analyzed with the finite element method, with the goal of developing a computationally-efficient and accurate model. Wall behavior can be grouped into three modes of failure, which correspond to three ranges of blast pressures. Computational results were compared to high-speed video images and debris velocities obtained from experimental data. A parametric analysis was conducted to determine the sensitivity of computed results to critical modeling values. It was found that the model has the ability to replicate experimental results with good agreement. However, it was also found that, without knowledge of actual …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Computer-Aided Analysis And Design Of Rectangular Buried Tank Walls And Its Safety Factor Evaluation Based On Yield Line Analysis, Rakiya J. Fatoohi

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the results of a study that determines the true safety factor of underground square reinforced concrete tank walls.

The walls are analyzed and designed by elastic method. The amount and distribution of the reinforcement was determined by use of the alternate design method (working stress) in compliance with all ACI code requirements. The wall's ultimate moment was computed by use of yield line theory assuming non-isotropic reinforcement. The ultimate value of the earth pressure was computed and compared with the elastic analysis and design values to give the true safety factor.

The results of this study indicate …

Structural Sensitivity Analysis On A Parallel Computer, Niu Kian Teck

Civil & Environmental Engineering Theses & Dissertations

Substructuring formulation using adjoint variable approach has been developed for design sensitivity analysis and optimization of large scale structures. In this study, the procedure for statics and sensitivity analysis are re-examined to propose a programming scheme which can be implemented either in a sequential or parallel environment. The computational times of the substructuring formulation using a single processor versus multi-processors are compared to see the effectiveness of the formulation in the concurrent computing environment.

Direct Design Of A Portal Frame, Angel Fajardo Ugaz

Dissertations and Theses

This investigation was undertaken to develop plastic design aids to be used in the direct design of optimum frames. It uses the concept of minimum weight of plastically designed steel frames, and the concept of linear programming to obtain general solutions. Among the special characteristics of this study are: A. The integration of both gravity and combined loading conditions into one linear programming problem. B. The application of the revised simplex method to the dual of a parametric original problem. C. The application of A and B above in the development of design aids for the optimum design of symmetrical …