Computer-Aided Engineering and Design Commons^™

The Impact Of Gender Sensitization On Requirements Elicitation: A Controlled Experiment, Ruthbertha Kateule, Salome Maro, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Previous studies in software engineering have reported the importance of considering gender aspects in various software engineering activities, including requirements engineering, however, to the best of our knowledge, no work has investigated the impact of gender sensitisation on eliciting gender inclusive software requirements. The objective of this study was to understand the impact of gender sensitisation on software requirements elicitation. We conducted a controlled experiment using 40 undergraduate students from three different computing programs at the University of Dar es Salaam. The 40 participants were divided into 9 groups with both males and females. The participants were asked to elicit …

Computational Insights Into Nucleosome Dynamics In Epigenetics Using Molecular Dynamics Simulations, Rutika Patel

Dissertations, Theses, and Capstone Projects

Nucleosome core particles (NCP) are the building blocks that form a highly organized and compact chromatin structure. Nucleosomes package DNA in the nucleus of eukaryotic cells. The NCP consists of about 147 base pairs of DNA wrapped around the histone octamer, with 1.65 superhelical turns in a left-handed manner. The histone octamer is composed of two copies of H3, H4, H2A, and H2B. Together with histone H1 and linker DNA, they further assemble into a higher-order chromatin structure. The nucleosome complex is stabilized by electrostatic interactions between positively charged histone residues and the negatively charged DNA backbone. To effectively access …

Toward Learning-Based Reconstruction And Part Decomposition Of Man-Made 3d Geometry: Neural Implicit Representations And Scalable Supervision, Shen Fan

Dissertations

Digital three-dimensional (3D) models are central to engineering design, analysis, and manufacturing, but learning pipelines for man-made geometry often operate on sampled carriers that do not preserve all of the structure present in exact CAD representations. This dissertation studies learning-based reconstruction and part decomposition for structured man-made 3D geometry, from general object benchmarks to CAD-derived datasets, with a focus on neural implicit representations trained from signed-distance samples, point clouds, and tessellated meshes. The goal is to make these models more accurate, more part-aware, and more consistently supervised.

First, signed distance function (SDF) reconstruction with implicit neural representations is improved through …

Leveraging Convolutional Neural Networks For Through-The-Wall Radar Imaging: Challenges, Impacts, And Future Directions, Tumaini Edgar, Abdulla F. Ally, Abdi T. Abdalla

Tanzania Journal of Engineering and Technology (TJET)

Through-the-wall radar imaging (TWRI) is an essential technology for military and rescue applications; however, its performance in detecting and visualizing high-quality images of targets behind walls is significantly degraded by multipath reflections and signal attenuation. This paper reviews the current state of TWRI and its challenges, and explores the transformative potential of deep learning, particularly convolutional neural networks (CNNs), in addressing these challenges. Peer-reviewed articles published from 2018 to 2024 were analysed to examine CNN applications in addressing TWRI challenges. The analysis reveals that using CNNs, TWRI systems can be more effective by filtering wall distortions, reducing noise, lowering computational …

A Virtual-Reality-Based Dental Simulator For Endodontics With Automated Formative Feedback, Yousef Salah Abo El Ela

Theses and Dissertations

Advancements in virtual reality (VR) and haptic technology are transforming the landscape of medical and dental education, offering new avenues for safe, immersive, and repeatable training experiences. Within dentistry, endodontics presents unique challenges for preclinical education due to anatomical complexity, limited access to extracted teeth, ethical concerns, and the shortcomings of conventional plastic models. Despite endodontics specific plastic teeth being available, they fall short of replicating the hardness of real extracted teeth, are relatively costly compared to generic plastic teeth, and are ultimately a disposable item which makes them inadequate as a sustainable long-term solution. Extracted teeth do a much …

Universal Systems Simulation Via Constraint Hypergraphs With Applications To Digital Twins, John Morris

All Dissertations

The characterization of systems encompasses a variety of modeling frameworks designed to capture specific behaviors and components of various system domains. Whatever the framework, the core elements of a system representation are the information of the system and a description of how that information is related. The relations in deterministic systems are functions, which, when composed to form executable processes, can be used to simulate system data. A declarative modeling framework is one that encodes mechanisms for preparing these simulations within the model structure, allowing an external agent to form the execution processes required for a given context. To date, …

Reconfigurable Python Autopilot Software For Rc Aircraft, Kate Doiron

Honors Theses

No abstract provided.

Design And Performance Analysis Of Fiber Bragg Grating Temperature Sensor For Industrial Processes Sensing Applications, Paul Stone Stone Brown Macheso S.B.

Tanzania Journal of Engineering and Technology (TJET)

The Fiber Bragg Grating (FBG) sensor has become a widespread sensing device because of its small size, passive design, immunity to electromagnetic interference, and direct ability to measure physical properties like temperature and strain. Recently, femtosecond infrared laser processing and regeneration techniques have resulted in the development of stable high-temperature gratings, which are a powerful tool in smart factories, an aspect of the fourth Industrial Revolution (4IR), and show promise for application in harsh environments like high pressure, high temperature, or ionizing radiation. The development of stable high-temperature gratings that can withstand harsh environmental factors like high temperatures, pressures, and …

Design And Implementation Of Secured Hybrid Gateway Node For Securing Iot - Enabled Distribution Automation, Ally Bitebo

Tanzania Journal of Engineering and Technology (TJET)

The integration of smart grid and Internet of Things (IoT) technologies plays a crucial role in enhancing the quality of services provided by traditional electrical grids. This combination has enabled the introduction of new services, such as demand response, automatic meter reading, and IoT-enabled Distribution Automation (IoT-DA), which incorporates sensors, actuators, intelligent electrical devices (IEDs), and information and communication technologies to monitor and control the grid. However, this integration also introduces network security risks, including Denial of Service (DoS) attacks, false data injection, and masquerading attacks, such as system node impersonation that can transmit incorrect readings, trigger false alarms, and …

Effects Of Technical Debt On Software Interoperability, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Technical debt (TD) refers to sub-optimal development decisions that make the software costly to maintain and evolve. Examples of TD include structural complexity, violation of coding styles, and code complexity. Existing research has investigated the nature, causes and indicators of TD, as well as tools and strategies for managing TD. However, although TD could hinder the ability of a software system to be interoperable with others, existing literature has limited evidence on how TD affects systems interoperability. This limits the ability of software engineering teams to manage TD in ways that do not hinder systems interoperability. To fill this void, …

Automatic Scoring Cornhole Board System, Eric Diffendal, Jonah Harsh, Connor Lengel, Brett Sukie

Williams Honors College, Honors Research Projects

The objective is to create a self-scoring cornhole board that can detect and calculate each team's score based on the bags thrown each round and to be created at a low cost/eventually being sold at the current cost of a normal board. When playing cornhole, the game is simple: throw a bag on the board; however, the scores are variable (deduct and add) across each round. The most common issue when playing cornhole is miscalculations of the scores and forgetting the correct scores. Thus, this invention will make gameplay easy for all to play.

Autonomous Driving Trajectory Prediction, Carlos Funes

Undergraduate Research Symposium Lightning Talks

Autonomous driving is undoubtedly one of the world's most revolutionary technologies, opening the door to a more secure traffic environment. This innovation has led to vehicles being able to drive by themselves without the necessity of a person behind the wheel, as well as cruise control, lane-keeping assist, and automatic emergency braking. Unfortunately, there is still plenty of work before autonomous driving becomes more popular among drivers. While at UNLV as an undergraduate student/research assistant, one of my goals is to learn how these technologies work to bring ideas into the automotive industry by refining solutions to problems within these …

Evaluation Of Business-Driven Reference Architecture For Big Data Analytics Implementation By Public Sector Organizations In Resource-Constrained Setting: A Case Study Of Uganda, Matendo Didas

Tanzania Journal of Engineering and Technology (TJET)

Big Data Analytics (BDA) is a new area at the nexus of agenda, public sector organizations, and government business. It may satisfy the growing need for trustworthy, cost-effective services in the public sector for better, more informed decision-making processes. BDA has been proposed on the planning schedules of several public sector organizations and the government. Therefore, from the previous work, using Uganda as a case study, specifically the Uganda Bureau of Statistics (UBOS), Ministry of Health (MoH), and Ministry of Education and Sports (MoES), this study aims to evaluate a designed Business-Driven Reference Architecture for Big Data Analytics Implementation (BRABDAI) …

Data Communication Over Power-Lines: A Review On Technical, And Applications Challenges, Abdi Abdalla

Tanzania Journal of Engineering and Technology (TJET)

This paper presents a review study on the data communication over power-lines, commonly referred to as power-line carrier, power-line communication (PLC), mains communications, or power-line digital subscriber line (PDSL). This study examines the technical and application advantages and challenges associated with adopting PLC as a preferred alternative technology for wideband or broadband data communication. The broader coverage area of the PLC network gives it a distinct advantage over other communication network technologies. Additionally, implementing a communication system using the existing power-line network is more cost-effective and less time-consuming compared to constructing a new network from scratch. However, the primary challenge …

Assessment Of Web Security Vulnerabilities For Common Open Source Virtualization Software, Said Ally

Tanzania Journal of Engineering and Technology (TJET)

Open-source hypervisors have emerged as an integral technology for virtualizing server resources in cloud and data center computing. Hypervisor security efficiency is determined by virtual machine isolation, which is a de facto adoption factor in the selection process, as well as its ability to respond to web attacks. This paper assesses the security performance of Proxmox VE and XenServer for type 1 hypervisors, and Kernel Virtual Machine and Oracle Virtual Box for type 2 hypervisors. Security analysis was conducted using common exposures extracted from vulnerability databases and mapped against the OWASP 2013 and 2017 projects. For clarity, experiments were carried …

Investigations Of Cell Tower Antennas Parameters On Reduction Of Radio Frequency Radiation Levels From Radio Base Stations, Florence U. Rashidi

Tanzania Journal of Engineering and Technology (TJET)

The widespread deployment of mobile cellular base stations in populated areas has raised public health concerns due to increased exposure to radio frequency (RF) radiation emissions. Exposure to high levels of RF radiation can have potential thermal and non-thermal biological effects. Optimizing the configuration of cell tower antenna parameters is crucial for mitigating these radiation levels. This study therefore aims at systematically investigating the influence of different cell tower antenna parameters on reducing the RF radiation levels from mobile base stations. Field measurements were conducted at two cell sites shared by multiple mobile operators. Electric field strengths were measured at …

Development Of A Rule-Based Monitoring System For Autonomous Heavy Equipment Safety, Amirpooya Shirazi

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Roadway construction work zones are constantly exposed to interactions among construction equipment, workers, and vehicles. Furthermore, ensuring safety in these areas is considered a challenging task due to the complexity of the environment. As shown in the rising trend of fatal accidents in roadway work zones, current OSHA regulations in construction safety are insufficient in effectively detecting unsafe situations and mitigating the risks. Furthermore, best practices, such as internal traffic control planning (ITCP), exhibit critical limitations requiring continuous monitoring of active work zones as well as adjustments to the site coordination plans due to the dynamic nature of work zone …

Railroad Condition Monitoring Using Distributed Acoustic Sensing And Deep Learning Techniques, Md Arifur Rahman

College of Graduate Studies: Theses & Dissertations

Proper condition monitoring has been a major issue among railroad administrations since it might cause catastrophic dilemmas that lead to fatalities or damage to the infrastructure. Although various aspects of train safety have been conducted by scholars, in-motion monitoring detection of defect occurrence, cause, and severity is still a big concern. Hence extensive studies are still required to enhance the accuracy of inspection methods for railroad condition monitoring (CM). Distributed acoustic sensing (DAS) has been recognized as a promising method because of its sensing capabilities over long distances and for massive structures. As DAS produces large datasets, algorithms for precise …

Optimal Domain-Partitioning Algorithm For Real-Life Transportation Networks And Finite Element Meshes, Jimesh Bhagatji, Sharanabasaweshwara Asundi, Eric Thompson, Duc T. Nguyen

Civil & Environmental Engineering Faculty Publications

For large-scale engineering problems, it has been generally accepted that domain-partitioning algorithms are highly desirable for general-purpose finite element analysis (FEA). This paper presents a heuristic numerical algorithm that can efficiently partition any transportation network (or any finite element mesh) into a specified number of subdomains (usually depending on the number of parallel processors available on a computer), which will result in “minimising the total number of system BOUNDARY nodes” (as a primary criterion) and achieve “balancing work loads” amongst the subdomains (as a secondary criterion). The proposed seven-step heuristic algorithm (with enhancement features) is based on engineering common sense …

Using Immersive Technology To Improve Mechanical Design: Use Cases, A Review Of Current Technology, And An Experiment In Requirement Elicitation In Virtual Reality, William Hawthorne

All Theses

There has been a growing trend in the use of immersive technologies within engineering design. This research is focused on understanding how Virtual Reality (VR) technologies support design reviews. Modern tools including virtual reality hardware and software were tested for current capabilities and challenges. In a review of literature, two key gaps are identified: the rapid advancements of VR and AR technology and limited formal studies to determine the costs and benefits of immersive technology within engineering design reviews. This research has resulted in three key outcomes. First, use cases of immersive reality technologies are identified, through the lens of …

Modeling, Simulation And Control Of Microrobots For The Microfactory., Zhong Yang

Electronic Theses and Dissertations

Future assembly technologies will involve higher levels of automation in order to satisfy increased microscale or nanoscale precision requirements. Traditionally, assembly using a top-down robotic approach has been well-studied and applied to the microelectronics and MEMS industries, but less so in nanotechnology. With the boom of nanotechnology since the 1990s, newly designed products with new materials, coatings, and nanoparticles are gradually entering everyone’s lives, while the industry has grown into a billion-dollar volume worldwide. Traditionally, nanotechnology products are assembled using bottom-up methods, such as self-assembly, rather than top-down robotic assembly. This is due to considerations of volume handling of large …

Session 2: The Effect Of Boom Leveling On Spray Dispersion, Travis A. Burgers, Miguel Bustamante, Juan F. Vivanco

SDSU Data Science Symposium

Self-propelled sprayers are commonly used in agriculture to disperse agrichemicals. These sprayers commonly have two boom wings with dozens of nozzles that disperse the chemicals. Automatic boom height systems reduce the variability of agricultural sprayer boom height, which is important to reduce uneven spray dispersion if the boom is not at the target height.

A computational model was created to simulate the spray dispersion under the following conditions: a) one stationary nozzle based on the measured spray pattern from one nozzle, b) one stationary model due to an angled boom, c) superposition of multiple stationary nozzles due an angled boom, …

On Blockchain Performance Enhancement: A Systematic Map Of Strategies Used, Anthony Kigombola

Tanzania Journal of Engineering and Technology (TJET)

Blockchain technology is one among the recent innovations in the computing industry. Blockchains have gathered a widespread interest in the industry mainly due to their security promise. Despite the anticipated benefits of Blockchains, there are several limitations which make the technology less suitable in large scale applications such as banking, one being low throughput. Several initiatives to improve the throughput of Blockchains are being tried out both in the academia and the business worlds but no systematic classification of the initiatives and the strategies used has been done. This study explores Blockchain performance improvement initiatives and classify the initiatives by …

28 Ghz Patch Antenna Array With Reduced Mutual Coupling For 5g Communications Systems, Rahabu F. Mwang’Amba, Hashimu Uledi Iddi

Tanzania Journal of Engineering and Technology (TJET)

A 28 GHz patch antenna array with reduced mutual coupling for 5G communication systems is presented in this paper. Two elements antenna array was simulated with a periodic boundary to represent an infinity array. The antenna array is attached with a pair of the coupled directional coupler with a coupling value of -3.47 dB, and transmission lengths of 3.40 mm and 7.62 mm depending on the antenna array's magnitude and phase coefficient were designed and simulated. A reduced mutual coupling of -31.86 dB compared to -10.75 dB for an array without a decoupling network was observed. The wide scanning angle …

Data-Driven Research On Engineering Design Thinking And Behaviors In Computer-Aided Systems Design: Analysis, Modeling, And Prediction, Molla Hafizur Rahman

Graduate Theses and Dissertations

Research on design thinking and design decision-making is vital for discovering and utilizing beneficial design patterns, strategies, and heuristics of human designers in solving engineering design problems. It is also essential for the development of new algorithms embedded with human intelligence and can facilitate human-computer interactions. However, modeling design thinking is challenging because it takes place in the designer’s mind, which is intricate, implicit, and tacit. For an in-depth understanding of design thinking, fine-grained design behavioral data are important because they are the critical link in studying the relationship between design thinking, design decisions, design actions, and design performance. Therefore, …

Constraint-Aware, Scalable, And Efficient Algorithms For Multi-Chip Power Module Layout Optimization, Imam Al Razi

Graduate Theses and Dissertations

Moving towards an electrified world requires ultra high-density power converters. Electric vehicles, electrified aerospace, data centers, etc. are just a few fields among wide application areas of power electronic systems, where high-density power converters are essential. As a critical part of these power converters, power semiconductor modules and their layout optimization has been identified as a crucial step in achieving the maximum performance and density for wide bandgap technologies (i.e., GaN and SiC). New packaging technologies are also introduced to produce reliable and efficient multichip power module (MCPM) designs to push the current limits. The complexity of the emerging MCPM …

Big Data Analytics Framework For Effective Higher Education Institutions, George Matto

Tanzania Journal of Engineering and Technology (TJET)

There has been an increased dependency on Information and Communication Technologies (ICTs) in undertaking various activities in Higher Education Institutions (HEIs) ecosystems. Because of that, huge volumes of data have increasingly been generated. There have been, for instance, considerable amounts of data generated through electronic platforms involved in students’ admission and registration process, students’ academic records management, teaching and learning data, curriculum related data, and several other administrative data. Analysis of data generated from these platforms stands to give students, lecturers, HEIs Management, policy makers and implementers, and other stakeholders useful insights that would help in improving HEIs’ effectiveness. Unfortunately, …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

Real-Time Data Analytics For Monitoring Electricity Consumption Using Iot Technology, Waheed Muhammad Sanya, Gaurav Bajpai, Omar Haji Kombo, Evariste Twahirwa

Tanzania Journal of Engineering and Technology (TJET)

Rising electricity bills as a result of climate variability and new home electrical and electronic appliances are becoming a major source of concern for most end users. Consumers are typically unaware of their household electricity consumption patterns and the costs associated with them, making proper planning and budgeting difficult. Monitoring and controlling energy consumption on appliances can reduce energy costs for end-users. The Internet of Things (IoT) has the potential to provide remote monitoring and control of devices via automated monitoring and control. In this study, we propose an IoT-enabled system for monitoring and controlling energy consumption in homes to …

Group-Based Data Offloading Techniques Assisted By D2d Communication In 5g Mobile Network, Juma S Ally

Tanzania Journal of Engineering and Technology (TJET)

Machine type communication devices proposed as one of the substantial data collections in the 5G of wireless networks. However, the existing mobile communication network is not designed to handle massive access from the MTC devices instead of human type communication. In this context, we propose the device-to-device communication assisted a mobile terminal (smartphone) on data computing, focusing on data generated from a correlated source of machine type communication devices. We consider the scenario that the MTC devices after collecting the data will transmit to a smartphone for computing. With the limitation of computing resources at the smartphone, some data are …