Computer-Aided Engineering and Design Commons^™

Structural Design And Finite Element Analysis Of A 54 Ton Freight Wagon Bolster Test Rig Under Vertical Center Plate Load, Shandy Dwi Prayoga, I Dewa Gede Ary Subagia, I Ketut Adi Atmika, Abdul Rohman Farid, Yunior Lanang Satrio

Journal of Mechanical Engineering Science and Technology (JMEST)

Bolster is one of the bogie's components that receives direct loading from the car body and freight movement. One of the problems that occurs in the bolster is permanent deflection during vertical and transversal static loading. Therefore, a static loading test is required to evaluate the structural strength of the bolster. During the static loading test, a rig is required to hold the bolster so that the bolster is in a fixed position. The rig owned by PT. INKA (Persero) showed a plastic deformation at the vertical center plate load (VCP 5.22P). Therefore, a modified design of the rig is …

Sentience, Sheetal Agrawal

Masters Theses

The increasing urgency for sustainable and adaptive systems has driven research toward embedding intelligence directly into materials rather than relying solely on external sensing and control systems. This thesis explores how smart material1 embedded systems can be designed to recognize and respond to environmental signatures, defined as measurable patterns such as temperature fluctuations and mechanical forces. Central to this investigation is the integration of shape memory alloys, particularly Nitinol, with geometry-based actuation mechanisms that amplify material behavior into functional system responses.

The central argument is that designing with smart materials is a design problem, not primarily a materials science problem …

A Virtual-Reality-Based Dental Simulator For Endodontics With Automated Formative Feedback, Yousef Salah Abo El Ela

Theses and Dissertations

Advancements in virtual reality (VR) and haptic technology are transforming the landscape of medical and dental education, offering new avenues for safe, immersive, and repeatable training experiences. Within dentistry, endodontics presents unique challenges for preclinical education due to anatomical complexity, limited access to extracted teeth, ethical concerns, and the shortcomings of conventional plastic models. Despite endodontics specific plastic teeth being available, they fall short of replicating the hardness of real extracted teeth, are relatively costly compared to generic plastic teeth, and are ultimately a disposable item which makes them inadequate as a sustainable long-term solution. Extracted teeth do a much …

Universal Systems Simulation Via Constraint Hypergraphs With Applications To Digital Twins, John Morris

All Dissertations

The characterization of systems encompasses a variety of modeling frameworks designed to capture specific behaviors and components of various system domains. Whatever the framework, the core elements of a system representation are the information of the system and a description of how that information is related. The relations in deterministic systems are functions, which, when composed to form executable processes, can be used to simulate system data. A declarative modeling framework is one that encodes mechanisms for preparing these simulations within the model structure, allowing an external agent to form the execution processes required for a given context. To date, …

Thermal Heterogeneity And Lithium Plating During Fast Charging Of Lithium-Ion Battery., Ayodeji Avis Adeniran

Electronic Theses and Dissertations

Presently, widespread adoption of electric vehicles (EVs) is hindered by challenges associated with XFC, including heat generation, lithium plating, and accelerated battery degradation. This dissertation addresses these barriers through two coordinated themes—lithium plating and thermal management—spanning four manuscripts that integrate operando diagnostics, physics-based simulation, and module-level design optimization. The first theme seeks a fundamental investigation into the dynamic interplay between temperature heterogeneity and lithium plating during fast charging, a phenomenon that poses significant limitations on the performance of graphite-based anodes. Firstly, a custom operando cell with a sapphire window was designed to enable synchronized MWIR thermography and optical imaging of …

Exploration Of Physics-Informed Grid Generation Technique For Wall-Modeled Les Using Eagle3d, Dominic Schneider

Doctoral Dissertations and Master's Theses

Wall-Modeled Large Eddy Simulation (WMLES) is an area of interest due to its ability to lower computational costs of LES. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required. A novel technique for generating a lean, physics based WMLES grid is described.

The technique utilizes a RANS solution to extract turbulence information, user-specified values related to resolution of turbulent energy levels, acoustics waves, and shock waves, to generate a point cloud for producing a lean WMLES grid with in-house …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

A Comparison And Investigation Of 2d Axisymmetric And 3d Models For The Wave Augmented Varicose Explosions Atomizer, Caleb Miller

Senior Honors Theses

Atomization of non-Newtonian, high-viscosity fluids is a challenging task with many applications. One method of atomizing these types of flows is the Wave Augmented Varicose Explosions (WAVE) atomizer. Using this framework, the study establishes an analysis methodology, investigates the relationship between 2D axisymmetric (2DA) and 3D models, and provides analysis of geometric, non-geometric, and non-dimensional parameter influences on the atomizer characterization in 2DA models. The study found that 2DA models can provide viable predictions of certain 3D model characteristics, established several mathematical models for parameter relationships among 2DA models, and identified certain metrics as inadequate predictors of atomizer characteristics in …

Deep Neural Network Models For Heatsink Performance Prediction And Optimization In Single Phase Immersion Cooling: Framework For Future Design Tools And Digital Twin Integration, Braxton J. Smith

Mechanical and Aerospace Engineering Theses - Archive

The rapidly rising computational power of modern computing components combined with the advanced packaging techniques being implemented has resulted in exponentially increasing thermal design powers (TDP) from CPUs and GPUs. Traditional air-cooling methods are approaching their effective cooling limits for many of these components, requiring lower supply air temperatures, higher supply air flowrates, and much larger heatsinks to remain feasible. Transitioning from air-cooling to single-phase immersion cooling offers numerous benefits in thermal performance, data-center size reduction, and energy efficiency. To leverage the merits of immersion cooling, the performance of a given heatsink must be predicted and optimized for best performance …

Neural Operator And Physics-Informed Deep Learning Approaches For Inverse Design Of Composites And Manufacturing Processes, Minglei Lu

All Dissertations

In this dissertation, artificial intelligence (AI) models are designed and used to accelerate inverse design of composites and manufacturing processes. The critical bottlenecks in machine learning (ML) including data availability, data quality, model generalization and adaptation, interpretability, physical consistency, and the ’black box’ nature of models for the inverse design are addressed. And the proposed AI models are tested under different engineering scenarios. Firstly, a fast deep neural operator (DNO) structure was developed to significantly reduce training time. This model was tested in the context of additive manufacturing, a transformative industrial technology that allows for the creation of materials with …

An Efficient Computational Frameworks For Design And Analysis Of Metamaterials, Raj Pradip Khawale

All Dissertations

Advancement in additive manufacturing helps in building artificial lattice structures with unique properties that are not available in naturally occurring materials or in continuum structures. Specifically, beam-based lattices are well known for producing lightweight structures with very high strength, auxetic behavior, and energy absorption capabilities. In recent years, numerous research studies have been conducted on generating algorithms and frameworks to obtain unusual properties based on the variation in the cell geometry and material properties. However, the exploration of the full design space is hampered in practice primarily due to restrictions on cell tiling variation. Additionally, the lattices are very intricate, …

Development Of A Rule-Based Monitoring System For Autonomous Heavy Equipment Safety, Amirpooya Shirazi

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Roadway construction work zones are constantly exposed to interactions among construction equipment, workers, and vehicles. Furthermore, ensuring safety in these areas is considered a challenging task due to the complexity of the environment. As shown in the rising trend of fatal accidents in roadway work zones, current OSHA regulations in construction safety are insufficient in effectively detecting unsafe situations and mitigating the risks. Furthermore, best practices, such as internal traffic control planning (ITCP), exhibit critical limitations requiring continuous monitoring of active work zones as well as adjustments to the site coordination plans due to the dynamic nature of work zone …

Gradient-Based Trade-Off Design For Engineering Applications, Lena A. Royster, Gene Hou

Mechanical & Aerospace Engineering Faculty Publications

The goal of the trade-off design method presented in this study is to achieve newly targeted performance requirements by modifying the current values of the design variables. The trade-off design problem is formulated in the framework of Sequential Quadratic Programming. The method is computationally efficient as it is gradient-based, which, however, requires the performance functions to be differentiable. A new equation to calculate the scale factor to control the size of the design variables is introduced in this study, which can ensure the new design achieves the targeted performance objective. Three formal approaches are developed in this study for trade-off …

Use Of Bioheat Modeling To Characterize And Optimize Implantable Medical Devices And Neuromodulation Technologies, Adantchede Louis Zannou

Dissertations and Theses

Medical device development includes prototyping, benchtop characterization, preclinical studies, and clinical trials. Understanding the limitations and potential adverse effects of medical devices prior to their administration in humans is a crucial first step. Optimizing medical devices is essential to employing technology and improving patients care. Computational modeling is widely adopted as a powerful tool to predict stimulation/recording parameter optimization, rapid electrode/device prototyping, investigating novel mechanism of action, and testing working principles of any medical devices. Many implantable neuromodulation technologies including Spinal Cord Stimulation (SCS), which provide substantial therapeutic benefit for patient population with lower back pain, produces heat via the …

Strain-Based Design Of Steel-Polymer-Steel Composite Pipes, Vul Thang

LSU New Orleans Theses and Dissertations

Many offshore single-wall pipelines and structural failures have occurred in the past. As a result, lives were lost, and billions of dollars were spent. In addition, natural disasters such as earthquake fault zones can cause a large volume of soil movement. This can easily damage single-wall pipelines or piles of fixed offshore platforms in the earthquake fault zone.

Currently, the single-wall pipelines are used for the offshore and onshore oil and gas industry. This research investigated the use of double-wall composite pipe steel-polymer-steel (SPS) in place of single-wall pipe to prevent such failures. The double-wall composite pipe has a larger …

Characterization Of Friction Element Welding Using Finite Element Modeling, Ankit Varma

All Dissertations

Friction element welding (FEW) has been advocated as a solution to weld different materials together, with the ability to join high-strength materials for a range of thicknesses with low input energy and a short processing time. This work develops a coupled thermal-mechanical finite element model to better understand the physical mechanisms involved in the process and to predict temperature and material flow during the process. Furthermore, microstructural analysis is performed for the steel layer using a scanning electron microscope and Vickers microhardness tester to understand the variation in its grain structure and hardness. Results from the finite element model and …

Method Of Embedded Imperfections For The Direct Simulation Of Deformation Instabilities In Film-Substrate Structures, Siavash Nikravesh Kazeroni

Mechanical Engineering ETDs

In this dissertation, a novel finite-element methodology called “embedded imperfections” is proposed and employed for computationally simulating various types of deformation instabilities observed in film-substrate structures subjected to mechanical loading. The approach involves the incorporation of elements having distinctive material properties within the film-substrate interface. One can interpret this practice as a deliberate distribution of material defects within the numerical model. It has been shown that embedded imperfections not only can trigger the onset of instability, but also can lead to “direct” simulation of deformation instability problems in that primary and subsequent instability modes can all be captured in a …

Context-Aware Sensing And Fusion For Structural Health Monitoring And Night Time Traffic Surveillance, Xinxiang Zhang

Electrical Engineering Theses and Dissertations

Rapid developments in computer vision technologies have been transforming many traditional fields in engineering and science in the last few decades, especially in terms of diagnosing problems from visual images. Leveraging computer vision technologies to inspect, monitor, assess infrastructure conditions, and analyze traffic dynamics, has gained significant increase in both effectiveness and efficiency, compared to the cost of traditional instrumentation arrays to monitor, and manually inspect civil infrastructures and traffic conditions. Therefore, to construct the next-generation intelligent civil and transportation infrastructures, this dissertation develops a comprehensive computer-vision based sensing and fusion framework for structural health monitoring and intelligent transportation systems. …

A Dynamic Programming Approach To Determine Optimum Modularity Level In Industrial Packaging, Marshal Louie, Kumar B

Journal of Applied Packaging Research

Modular packaging facilitate customization for accommodating variable product sizes in a product family. When determining package sizes for product variability, packaging engineers does not find difficulty to determine package dimension for less product variety whereas if the product variety is more, then determining the dimension of modular package involves complex decision-making and time-consuming process to find the optimal solution. This in turn directly impacts the overall lead time of the supply chain. Thus, in this paper a dynamic programming is developed to determine the quantity and dimension of modular packages for every demand of assorted products sizes. The program helps …

A Single-Stage Passive Vibration Isolation System For Scanning Tunneling Microscopy, Toan T. Le

Master's Theses

Scanning Tunneling Microscopy (STM) uses quantum tunneling effect to study the surfaces of materials on an atomic scale. Since the probe of the microscope is on the order of nanometers away from the surface, the device is prone to noises due to vibrations from the surroundings. To minimize the random noises and floor vibrations, passive vibration isolation is a commonly used technique due to its low cost and simpler design compared to active vibration isolation, especially when the entire vibration isolation system (VIS) stays inside an Ultra High Vacuum (UHV) environment. This research aims to analyze and build a single-stage …

Experimental And Numerical Simulation Of Split Hopkinson Pressure Bar Test On Borosilicate Glass, Mayank K. Bagaria

Dissertations, Master's Theses and Master's Reports

This study is an extension to the design of ceramic materials component exposed to bullet impact. Owing to the brittle nature of ceramics upon bullet impact, shattered pieces behave as pellets flying with different velocities and directions, damaging surrounding components. Testing to study the behavior of ceramics under ballistic impact can be cumbersome and expensive. Modeling the set-up through Finite Element Analysis (FEA) makes it economical and easy to optimize. However, appropriately incorporating the material in modeling makes laboratory testing essential. Previous efforts have concentrated on simulating crack pattern developed during 0.22 caliber pellet impact on Borosilicate glass. A major …

Large Eddy Simulations Of Vertical Jets In Crossflow, Pranaya Pokharel

LSU Doctoral Dissertations

Jets in crossflow (JICF) have applications ranging from oil spill to film cooling of turbine blades. Hence, an understanding of the flow physics is important. The majority of the research has been conducted for low velocity ratios between jet and crossflow with round jets. JICF is demonstrated to behave differently for high velocity ratios and different jet shapes. Circular and rectangular jets are commonly used in aircraft applications. Current study focuses on high velocity ratio JICF issuing from both circular and rectangular exit.

For simulating JICF, an in house code “Chem3D” is used with Large Eddy Simulation (LES) to model …

Numerical Study Of Liquid Atomization And Breakup Using The Volume Of Fluid Method In Ansys Fluent, Sai Saran Kandati

LSU Master's Theses

The spherical metal particles produced from the centrifugal atomization process have been the topic of numerous theoretical, experimental and numerical studies from the past few years. This atomization process uses centrifugal force to break-up molten material into spherical droplets, which are quenched into solidified granules by the flow of cold air on the spherical droplets. In the present work, a transient three-dimensional multiphase CFD model is applied to three different materials: Molten slag, aqueous glycerol solution, and molten Ni-Nb to study the influence of the dimensionless parameters on the centrifugal atomization outcome.

Results from numerical experiments indicated that the droplet …

Pressure Measurements Inside Multiple Cavities Of A Torque Converter And Cfd Correlation, Edward De Jesus Rivera

Dissertations, Master's Theses and Master's Reports

A torque converter was instrumented with 29 pressure transducers. The pressure transducers were located in multiple cavities. The instrumented cavities included, four transducers mounted on the impeller shell, on the channel between blades. Six transducers mounted on the pressure and suction sides on the middle streamline of a turbine blade. Another seven transducers mounted on the pressure and suction sides of the core, middle and shell streamlines of a stator blade. Seven transducers mounted on the torque converter clutch cavity. Finally, five on the cavity between the pressure plate and the turbine shell. The torque converter was part of a …

Multiphase Flow Modeling For Design And Optimization Of A Novel Down-Flow Bubble Column, Mutharasu Lalitha Chockalingam

LSU Doctoral Dissertations

The application of the Euler-Euler framework based Computational Fluid Dynamics (CFD) models for simulating the two-phase gas-liquid bubbly flow in down-flow bubble columns is discussed in detail. Emphasis is given towards the modelling and design optimization of a novel down-flow bubble column. The design features of this novel down-flow bubble column and its advantages over a conventional Plunging Jet down-flow bubble column are discussed briefly. Then, some of the present challenges in simulating a conventional Plunging Jet down-flow bubble column in the Euler-Euler framework is highlighted, and a sigmoid function based drag modification function is implemented to overcome those challenges. …

Effects Of Computer Simulation And Animation (Csa) On Students’ Problem Solving In Engineering Dynamics: What And How, Seyed Mohammad Tajvidi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Previous studies have shown that in many fields, computer simulation and animation (CSA) improve students’ learning and problem solving. However, despite the massive body of research on the role of computers in education, little research has been conducted to qualitatively examine how they affect the learning of engineering students. The purpose of this study was to explore how learning and problem solving were affected by computer modules and what similarities and differences existed between computer representations and paper-based examples.

An analysis of collected data, observations of participants’ problem-solving activities, and interviews revealed that computers can enhance students’ analytical thinking, organizing, …

Corgi: Compute Oriented Recumbent Generation Infrastructure, Christopher Allen Hunt

Master's Theses

Creating a bicycle with a rideable geometry is more complicated than it may appear, with today’s mainstay designs having evolved through years of iteration. This slow evolution coupled with the bicycle’s intricate mechanical system has lead most builders to base their new geometries off of previous work rather than expand into new design spaces. This crutch can lead to slow bicycle iteration rates, often causing bicycles to all look about the same. To combat this, several bicycle design models have been created over the years, with each attempting to define a bicycle’s handling characteristics given its physical geometry. However, these …

Multiscale Modeling: Thermal Conductivity Of Graphene/Cycloaliphatic Epoxy Composites, Sorayot Chinkanjanarot

Dissertations, Master's Theses and Master's Reports

The thermal property of epoxy as the binder in the Carbon Fiber (CF) composites, especially thermal conductivity is important to achieve the advance technology and to improve the performance of materials. Multiscale modeling including molecular dynamic (MD) modeling and micromechanical modeling is used to study the properties of neat Cycloaliphatic Epoxies (CE) and Graphene nanoplatelet (GNP)/CE with and without covalent functionalization.

The thermal properties (glass-transition temperature, thermal expansion coefficient, and thermal conductivity) and mechanical properties of CE system are investigated by MD modeling using OPLS-All Atom force field. A unique crosslinking technique is developed to achieve the cured CE models …

Modelling Of Coal-Biomass Blends Gasification And Power Plant Revamp Alternatives In Egypt’S Natural Gas Sector, Dalia A. Ali Eng, Mamdouh A. Gadalla Prof., Omar Y. Abdelaziz, Fatma H. Ashour Prof.

Chemical Engineering

Recently, there has been a growing research interest in the co-gasification of biomass with coal to produce syngas and electricity in a sustainable manner. Co-gasification technology do not only decrease potentially the exploitation of a significant amount of conventional coal resources, and thus lower greenhouse gases (GHG) emissions, but also boost the overall gasification process efficiency. In the present work, a rigorous simulation model of an entrained flow gasifier is developed using the Aspen Plus® software environment. The proposed simulation model is tested for an American coal and the model validation is performed in good agreement with practical data. The …

Optical Analysis And Fabrication Of Micro And Nanoscale Plasmonically Enhanced Devices, Avery M. Hill

Physics Undergraduate Honors Theses

Plasmonic nanostructures have been shown to act as optical antennas that enhance optical devices due to their ability to focus light below the diffraction limit of light and enhance the intensity of the incident light. This study focuses on computational electromagnetic (CEM) analysis of two devices: 1) GaAs photodetectors with Au interdigital electrodes and 2) Au thin-film microstructures. Experiments showed that the photoresponse of the interdigital photodetectors depend greatly on the electrode gap and the polarization of the incident light. Smaller electrode gap and transverse polarization give rise to a larger photoresponse. It was also shown that the response from …