Computer-Aided Engineering and Design Commons^™

Elevate Hardcase, Caleb J. Bailey, Colby M. Cordoba, Marissa Mccleod, Shaan Sandhu

Mechanical Engineering

The Elevate Hardcase project developed a portable mechanical elevation system that allows users to access rugged hard cases at a comfortable working height without needing a separate table or placing the case on uneven ground. The design focuses on improving ergonomics, portability, stability, and quick setup for users in field environments such as photography, hunting, and maintenance. Through customer research, concept development, prototyping, analysis, and testing, the final system was designed to support a loaded hard case, provide height adjustability, remain stable on uneven terrain, and be deployed by a single user in under five minutes. The final prototype demonstrates …

A Maximum Energy Release Rate Computational Framework For Fatigue Crack Trajectory And Life Prediction Under Mixed-Mode Proportional And Nonproportional Loading, Nahla Helmy Matar

Theses and Dissertations

The problem of mixed-mode fatigue crack growth has been a persistent research challenge. The determination of fatigue crack propagation direction directly impacts the safety and integrity of components and structures, making it crucial in various industrial applications, including welded drilling pipes, aerospace, and automotive engineering. Unlike uniaxial loading, mixed-mode cracks tend to change direction frequently (kinking), and nonproportional loading adds to the complexity of the problem. This research aims to estimate the crack propagation direction and fatigue crack life in linear elastic materials subjected to mixed-mode (I+II) loading conditions under proportional or non-proportional cyclic loading. Numerical software was developed based …

Structural Design And Finite Element Analysis Of A 54 Ton Freight Wagon Bolster Test Rig Under Vertical Center Plate Load, Shandy Dwi Prayoga, I Dewa Gede Ary Subagia, I Ketut Adi Atmika, Abdul Rohman Farid, Yunior Lanang Satrio

Journal of Mechanical Engineering Science and Technology (JMEST)

Bolster is one of the bogie's components that receives direct loading from the car body and freight movement. One of the problems that occurs in the bolster is permanent deflection during vertical and transversal static loading. Therefore, a static loading test is required to evaluate the structural strength of the bolster. During the static loading test, a rig is required to hold the bolster so that the bolster is in a fixed position. The rig owned by PT. INKA (Persero) showed a plastic deformation at the vertical center plate load (VCP 5.22P). Therefore, a modified design of the rig is …

Cal Poly Fluid Powered Vehicle Challenge 2025/2026, Ethan Malachi Nejame Zeiset, Christian Anthony Cuamani, Daniel Chacon-Bizarro, Marcus Minera, Bradley Hansell

Mechanical Engineering

In this Final Design Report, the Cal Poly Fluid Power Vehicle Challenge Contending Team competed in Sun Hydraulics’ 2026 Fluid Powered Vehicle Challenge. The objective of the competition is to expose college students to the fluid power sector, the “hidden giant” of the engineering industry. Specifically, student teams are tasked with the development of a human-powered, fluid-driven vehicle for use in various competitive settings. The team prioritized the optimization of an existing prototype for simplicity, ease of maintenance, and reliability during the competition. The existing prototype exhibited issues related to the main frame’s deflection under load, a lack of gear …

Characteristic Stress And Strain Optimization Of Cardiovascular Catheters With Laser-Cut Hypotubes Using Finite Element Analysis, Kyle E. Hirth

Master's Theses

Cardiovascular catheter systems rely on laser-cut hypotubes to balance flexibility and structural integrity required for minimally invasive surgical procedures.  Optimizing these mechanical characteristics remains a significant challenge.  This study aims to investigate the influence of key laser-cut geometric parameters on the mechanical performance of hypotubes through finite element analysis.

Commercially representative laser-cut hypotubes were modeled and a finite element model was developed.   Geometric design parameters were varied across a design space consisting of pitch values ranging from 0.006 in. to 0.018 in. and cuts per revolution (CPR) ranging from 2.5 – 4.5.  For each pitch and CPR combination, loading stiffness …

Design Optimization Of Active-Stabilizing Canards For High-Powered Rockets, Simon Babcock

Senior Honors Theses

Rocket canards are a common means of stabilizing a high-powered rocket in flight by producing aerodynamic forces to correct the rocket's trajectory. The size, shape, and position of the canards relative to the rocket body determine their control effectiveness and aerodynamic efficiency – two objectives of canard design with an inverse relationship to each other. By integrating automated iterative rocket trajectory simulation with adaptive surrogate modelling, this research optimized the canard planform geometry for a high-powered rocket to maximize the canards’ control effectiveness and aerodynamic efficiency through multi-variable, multi-objective design optimization. The canard design was first parameterized into four design …

Niu Fsae Brake Rotor Design & Flywheel-Based Test Stand Development, Cody J. Marko, Austin Coyne, Alexander Boyden

Honors Capstones

This project addresses the need for a reliable and validated brake rotor for the Northern Illinois University Formula SAE vehicle following a prior catastrophic rotor failure within the team. Brake rotors in high-performance applications are subjected to significant thermal and mechanical loads, and inadequate design can lead to failure, posing serious safety risks and limiting vehicle performance. To solve this issue, a new brake rotor was designed alongside a dedicated test stand to both improve braking performance and enable experimental validation. The rotor was evaluated using finite element analysis (FEA), including transient thermal and structural simulations, to predict maximum temperature, …

Enhancing The Leaning Control And Braking Sensation Of A Virtual Reality Vespa Simulator, Joseph Boccuzzi, Wesley Bleck, Jacob Hannebaum

Honors Capstones

The 71 North Partnership Studio located in Northern Illinois University’s Founders Memorial Library has developed a prototype Vespa simulator featuring an interactive Virtual Reality (VR) game and reactive elements. A previous Mechanical Engineering Senior Design team developed the system and improvements after its original development were sought after over the course of the current school year. The system consists of a stationary bike that allows the rider to lean left and right, which in turn causes their in-game character to turn left and right accordingly, simulating the effect of riding a Vespa scooter within a VR environment. Improvements were made …

Design And Development Of A 12-Degree-Of-Freedom Quadruped Robot, Kai De La Cruz

Master's Theses

This thesis presents the design, analysis, and experimental validation of a 12-degree-of-freedom (DOF) quadruped robot developed as a research platform for legged locomotion and control. The system builds upon the Cal Poly Legged Robotics Group’s prior 8-DOF quadruped, addressing key limitations in manipulability, load distribution, and mechanical robustness by introducing a 3-DOF leg architecture.

The mechanical design emphasizes lightweight construction, structural integrity, and modularity to support future research extensions. Static and dynamic loading models were developed to inform component sizing and material selection. A carbon-fiber chassis and redesigned leg assemblies were fabricated and validated through finite element analysis and physical …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …

Automated Soil Resetting System For Extraterrestrial Regolith Simulation, Parker W. Brennan, Anthony C. Daniels

Williams Honors College, Honors Research Projects

This project focuses on designing an automated soil resetting system for extraterrestrial regolith simulation. The system will prepare a regolith simulant testbed to a desired, repeatable density, enabling reliable wheel–terrain testing for planetary rover research. Manual soil preparation currently exposes testers to hazardous particulates and produces inconsistent results.

The proposed system will integrate mechanical and control elements to reset the soil bed safely and efficiently. A combination of raking and vibrational methods will be explored, with feedback sensors and automation to achieve target density control. The research will proceed through literature review, benchtop experimentation, prototype design, and full-scale testing over …

Experimental And Numerical Study On The Influence Of Carbon Fiber Reinforcement On The In-Plane Compressive Properties Of 3d Printed Hexagonal Honeycomb Core Structures, Deon Wallace

All Theses

There is difficulty with numerically replicating the behavior of composite honeycomb core structures numerically due to the trouble of gathering material properties from a hollow structure. Also, complex part geometries and carbon fiber reinforcement strategies can lead to unwanted structural weaknesses and variance in material properties that may not be reflected in numerical analysis when the part is additively manufactured. In this study, edgewise compressive testing is used to characterize the mechanical behavior and performance characteristics of these structures. The experimental results indicate an increase in the Young’s moduli of the honeycomb core structures as carbon fiber concentration increases. However, …

Design Of A 10-Ton Capacity Solar-Powered Cold Storage At The Cituis Fish Auction Site, Tangerang, Banten, Indonesia, Wardi Wardi, Muhammad Arif Budiyanto

Journal of Materials Exploration and Findings

This study presents the design of a 10-ton capacity solar-powered cold storage system for the Cituis Fish Auction Site (TPI) in Tangerang, Indonesia, as a sustainable solution to support the coastal fisheries sector. The system comprises two temperature zones: an anteroom at 5°C and a freezer room at -30°C, both integrated with a hybrid system utilizing solar panels and batteries. The total power consumption of the cooling system reaches 27.51 kW. The simulation results, obtained using HOMER Pro software, indicate that the hybrid PV system can reduce CO₂ emissions by up to 16,754 kg per year. From an economic …

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Lidss Raft Battery Pack Integration, Jack Maxwell, Vincent Stevens, Matthew Hoodmaker, Colin Flanders

Mechanical Engineering

Lawrence Livermore National Laboratory is a critical member of the United States Department of Defense. Their Independent Diagnostics Scoring System (LIDSS) uses rafts that operate in the ocean to collect missile test data. Several times a year, the United States will test their Inter-Continental Ballistic Missiles by launching them into the ocean near the Marshall Islands. This is where the LIDSS rafts collect their test data. Our project was centered around re-designing the battery pack used by the rafts. The current battery pack design experiences water ingress problems and is difficult to access. Our re-designed battery pack is waterproof to …

Effect Of Manufacturing And Machining Process On Recycled Composite Connecting Rods Under Tension And Compression, Walter W. Oppelt

Master's Theses

Carbon fiber reinforced polymer (CFRP) is an engineering material renowned for its high-strength and low-density material properties. Such properties make CFRPs especially useful for applications across many industries, including aerospace, automotive, marine, sporting goods, oil and gas, and more. However, with such favorable material properties comes the cost of high energy usage required to produce raw carbon fiber. Recycled carbon fiber (rCF) has emerged as a promising alternative, offering a significant reduction in energy usage. This research explores the viability of applying recycled CFRPs to internal combustion engines to both reduce energy costs during manufacturing and while in use. Mechanical …

Model-Based Design Of Compressed Lithium-Metal Pouch Cell Battery Modules For Evtol Applications, Scott J. Stirling

Master's Theses

Batteries with higher specific energy and power are essential for extending the range and performance of electric vertical takeoff and landing aircraft (eVTOLs). Anode-free lithium-metal pouch cells offer strong potential at the cell-level but require high compressive pressures to enhance cycle life and discharge performance. These pressures necessitate heavier structural components, reducing packaging efficiency at the module level.

To evaluate this tradeoff, a full-factorial enumeration model was developed to explore viable module designs within a constrained packaging volume. The model scales subsystem masses, enforces design rules and material limits, and accounts for large (~20%) cell thickness changes during cycling.

Results …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Mechanistic Insights Into Polymer-Assisted Graphene Exfoliation: The Roles Of Velocity, Adhesion, Cohesion, Temperature, Peeling Mode, And Edge Defect Via Coarse-Grained Molecular Dynamics, Linjiale Dai

All Theses

Graphene exfoliation is a critical step in the fabrication of high-quality graphene

layers. However, the underlying fracture mechanisms remain poorly understood. In this

work, I employed coarse-grained (CG) molecular dynamics (MD) simulations to

investigate how factors such as interfacial binding energy, substrate cohesion, temperature,

peeling mode, and edge defects influence the outcome of the exfoliation process. To model

polymer-assisted mechanical exfoliation, I used a finite-size system in which multilayer

graphene (MLG) is sandwiched between two thin polymer films. Leveraging the

spatiotemporal efficiency of the CG model, I performed fifty simulation iterations per

parameter set and analyzed the results from a …

Semi-Autonomous Trash Bot, Ben Leon, Ethan Mashburn, Connor Olivera, Dillon Michael Wood

ATU Scholars Symposium

Title: Semi-Autonomous Trash Robot

Authors: Benjamin Leon, Ethan Mashburn, Connor Olivera, Dillon Wood

Abstract: Environmental pollution is becoming more worrying every day as megatons of human waste persist in vast amounts in our ecosystems. The existing waste collection methodologies, with the labor, time, and cost components combined, make the process cumbersome. A potential solution could be an automated waste collection robot that incorporates AI into a cheap system that autonomously detects trash. This report proposes a machine that may be manufactured to adequate standards in terms of size and cost and deployed in various environments, with the ultimate goal of …

Development Of Planetary Drive System For Formula Sae Electric Race Car, Brian Wong, Bradley Maruoka, Joshua Charles Fine, Madison Kai

Mechanical Engineering

Hub motors are compact electric motors mounted directly on each outboard wheel hub. Utilized in Formula SAE and Formula Student vehicles, this configuration offers several advantages over traditional drivetrains, including packaging optimization within the chassis, vehicle traction, and improved efficiency. Although hub motors are not yet common in 4WD vehicles, they are being explored for use in EVs and may become more common in the future. Every year, Cal Poly Racing FSAE designs and builds a formula-style race car. To improve drivetrain performance, the team is investigating the achievability of a hub motor 4WD drivetrain, requiring extensive research, development, and …

Effects Of Thermal Shock Protection Methods On Pressure Measurements In A Rapid Compression Machine, Myeji Materego

Tanzania Journal of Engineering and Technology (TJET)

The study investigates the impact of thermal shock protection methods on pressure measurements in Rapid Compression Machines (RCMs). It focuses on the performance of various pressure transducers, specifically 601A, 701A, 6061B, and 7005, under atmospheric initial conditions. The research emphasizes the importance of mounting techniques and coatings, revealing their significant effects on pressure trace accuracy. Special mounting adaptors for the pressure transducers were designed and manufactured, this enabled simultaneous measurements for all transducers to be made in a single compression stroke. Instantaneous pressure within combustion chamber was measured when air was compressed in RCM from initial pressure and temperatures of …

Feasibility Study Of A Smart Insole With Triboelectric Energy Harvesters For Early Flatfoot Detection, Mohammad Alghamaz

Mechanical Engineering Theses

This study introduces a self-powered smart insole system designed for real-time monitoring of foot health, with a specific focus on detecting flatfoot conditions. The insole integrates multiple triboelectric energy harvesters strategically positioned to capture electrical signals generated from ground reaction forces during daily activities such as walking, jogging, and running. Proof-of-concept testing was conducted on a single participant under two conditions: a healthy foot and a simulated flatfoot created by reducing the medial arch height by approximately 70\. In the healthy foot trials, the system demonstrated consistent and reliable performance, with negligible electrical output from the medial arch sensor, as …

Nonlinear Bump Stiffness Model And Its Effect On Structural Stiffness And Nonlinear Rotordynamic Characteristic Of Foil Bearing, Woongeon Lee

Mechanical and Aerospace Engineering Dissertations - Archive

Bump foils are the most widely used in foil bearings, but the behaviors of bump foils are complicated, and their characteristics have been a focus of research for decades. Bump foils are usually modeled as stiffness and damping are accounted for through interactions with shaft eccentricity, loading, shaft speed and excitation frequency. These nonlinear characteristics of the bump foil of radial foil bearings can be observed during both manufacturing and operational processes because of their inherent structural properties such as bump geometry, forming process, age-hardening process and complicated contact behavior with bearing housing. These nonlinear characteristics are one of the …

Multi-Objective Design Optimization Of Hypoid Geared Rotor Systems, Xinqi Wei

Mechanical and Aerospace Engineering Dissertations - Archive

Hypoid gears represent one of the most generalized and complex forms of gearing, widely used for power transmission of skew shafts in vehicles, aviation, and marine transmission applications. Optimizing their performance remains challenging due to the complex tooth surface and contact behavior. Specifically, the design parameters of the tooth surface are multi-scale, interdependent, and subject to strong constraints, leading to strong nonlinearity and an ill-conditioned Jacobian matrix in the parameter identification model. Moreover, feasible and insensitive contact conditions are difficult to constrain due to the inherent complexity of local conjugate contact between the meshing surfaces. These challenges significantly increase optimization …

Akronauts Turbopump Research Project, Gerald Drabeck Iii, Michael Mccalla, Joshua Skelton

Williams Honors College, Honors Research Projects

The idea of this project is to design a turbo pump template capable of fitting into future Akronauts rocket designs. This allows the rockets to travel higher due to the reduced net weight. Many methods were used to verify the rigidity and feasibility of the design, such as Finite Element Analysis and fluid dynamics simulations.

Ease Of Product Disassembly Through A Systematic Structured Time-Based Design For Disassembly Methodology, Emeka S. Igwe

College of Graduate Studies: Theses & Dissertations

This research introduces a systematic time-based design for disassembly (DfD) framework aimed at optimizing product disassembly by addressing important features like liaisons between components in product, component accessibility and the overall modularity of the product. This study specifically covers electromechanical and mechatronic systems in both household and industrial setup, identifying their disassembly challenges and high value pointers for improvement. The methodology involves using a design for disassembly framework called LeanDfD in carrying out a holistic disassembly process and evaluating quantitative metrics like disassembly time and complexity and suggesting further redesign strategies to minimize disassembly time and cost. Adopting this systematic …

The Waterbug: Adaptive Paddle Board Frame, Remy James Elio Lacchia, Katie Kellum, Madeline Evenson, Shelbi Sullaway

Mechanical Engineering

People with disabilities, particularly wheelchair users, face limitations in participating in outdoor activities like paddleboarding. Central Cal Adaptive, a nonprofit organization, aims to bridge this gap by offering adapted paddleboarding experiences. However, their current paddleboard presents challenges such as portability, range of motion, stability, and safety. Our team, comprising Madeline Evenson, Remy Lacchia, Katie Kellum, and Shelbi Sullaway, has collaborated with Central Cal Adaptive to refine the existing paddleboard design. The team’s goal is to enhance the paddleboard's functionality to better cater to wheelchair users' needs, ensuring lightweight, portable, and safe features for an improved outdoor experience.

Our paddleboard concept …

An Efficient Computational Frameworks For Design And Analysis Of Metamaterials, Raj Pradip Khawale

All Dissertations

Advancement in additive manufacturing helps in building artificial lattice structures with unique properties that are not available in naturally occurring materials or in continuum structures. Specifically, beam-based lattices are well known for producing lightweight structures with very high strength, auxetic behavior, and energy absorption capabilities. In recent years, numerous research studies have been conducted on generating algorithms and frameworks to obtain unusual properties based on the variation in the cell geometry and material properties. However, the exploration of the full design space is hampered in practice primarily due to restrictions on cell tiling variation. Additionally, the lattices are very intricate, …