Applied Mechanics Commons^™

Elevate Hardcase, Caleb J. Bailey, Colby M. Cordoba, Marissa Mccleod, Shaan Sandhu

Mechanical Engineering

The Elevate Hardcase project developed a portable mechanical elevation system that allows users to access rugged hard cases at a comfortable working height without needing a separate table or placing the case on uneven ground. The design focuses on improving ergonomics, portability, stability, and quick setup for users in field environments such as photography, hunting, and maintenance. Through customer research, concept development, prototyping, analysis, and testing, the final system was designed to support a loaded hard case, provide height adjustability, remain stable on uneven terrain, and be deployed by a single user in under five minutes. The final prototype demonstrates …

Foldable Transfer Platform, Toby Sagi, Ashton Heiati, Triton Johnson, Zachary Denis

Mechanical Engineering

The report details the design and results of a Hoyer lift to transfer patients between wheelchairs and our sponsor's, Beacon VTC Santa Maria, vans. The lift disassembles into 3 main pieces, allowing the lift to be stored in the back of the van. The lift uses a hydraulic actuator to rotate the boom. We handed over our project to Beacon VTC Santa Maria for use in their facility!

Electronic Bike Chopper, Caleb S. Bermack, Joey Lederer, Ethan Dea, Evan Herrera, Fred Agregado

Mechanical Engineering

Our sponsor, David Royce, built an initial e-bike chopper prototype and desired an improved, next generation version. Our team designed and manufactured an electric bicycle to achieve the rugged visual style of a classic chopper motorcycle while improving stability and usability. The team built a functional E-Chopper prototype using a 4130 steel frame, custom dropouts, a long front fork, wide rear tire, ape-hanger handlebars, and prebuilt electric components such as the battery, hub motor, controller, throttle, and display. The design focused on reducing excess weight, improving frame rigidity, and meeting California e-bike regulations.

Me3328 Buckling Lab, Willem Bitterolf, Samantha Flores, Jacy Gonsalves, Brooke Thompson

Mechanical Engineering

The objective of this senior design project is to design and develop an instructional buckling apparatus (hereafter referred to as a “buckling tester”) to enhance student comprehension of column buckling behavior through direct experimental investigation. The apparatus is specifically intended to bridge the gap between theoretical predictions and observed physical response of structural column members subjected to axial compressive loading. In particular, the system will allow students to examine how column behavior transitions between Euler’s elastic buckling theory, which governs long, slender columns, and the Johnson parabolic formula, which more accurately describes intermediate and shorter columns influenced by material yielding. …

Me3328 Combined Loading Beam Bending Lab, Alejandro Islas, Viswesh Vancheeswaran, Owen Spencer, Henry Andrews

Mechanical Engineering

Serving as a new laboratory experiment for ME 3328 (Design for Strength & Stiffness), strain gauges were adhered, wired, and calibrated on a cantilever beam lab apparatus capable of undergoing pure bending, pure torsion, and combined bending.

Cal Poly Fluid Powered Vehicle Challenge 2025/2026, Ethan Malachi Nejame Zeiset, Christian Anthony Cuamani, Daniel Chacon-Bizarro, Marcus Minera, Bradley Hansell

Mechanical Engineering

In this Final Design Report, the Cal Poly Fluid Power Vehicle Challenge Contending Team competed in Sun Hydraulics’ 2026 Fluid Powered Vehicle Challenge. The objective of the competition is to expose college students to the fluid power sector, the “hidden giant” of the engineering industry. Specifically, student teams are tasked with the development of a human-powered, fluid-driven vehicle for use in various competitive settings. The team prioritized the optimization of an existing prototype for simplicity, ease of maintenance, and reliability during the competition. The existing prototype exhibited issues related to the main frame’s deflection under load, a lack of gear …

Multi-Ton Bin Transport Device, Cole Kramer, Ruth Stirrup, Fabian Ruiz, Daniel Ramirez

Mechanical Engineering

This project sought to solve a problem at the Water Resource Recovery Facility in San Luis Obispo with the transportation of multi-ton bins on-site. Their current solutions prove ineffective, as they damage their equipment and the concrete pad, as well as pose major safety risks to the operators moving these bins. The Facility requires the bin transport design to be low-cost, effective, and without risk of damage to the bins or surroundings, while maintaining the integrity of the bins. This project presents a conceptual design that is similar to a scissor lift, integrated into a trailer which will connect to …

Lidss Raft Battery Pack Integration, Jack Maxwell, Vincent Stevens, Matthew Hoodmaker, Colin Flanders

Mechanical Engineering

Lawrence Livermore National Laboratory is a critical member of the United States Department of Defense. Their Independent Diagnostics Scoring System (LIDSS) uses rafts that operate in the ocean to collect missile test data. Several times a year, the United States will test their Inter-Continental Ballistic Missiles by launching them into the ocean near the Marshall Islands. This is where the LIDSS rafts collect their test data. Our project was centered around re-designing the battery pack used by the rafts. The current battery pack design experiences water ingress problems and is difficult to access. Our re-designed battery pack is waterproof to …

Trailer Transport System For Multi-Ton Bins, Joanna Lizbeth Bendy, Kevin Matthew Creel, Annelise Vaara Cuneo, Hugo Alonso Valdez

Mechanical Engineering

This project aimed to improve the process of transporting 10,000-pound industrial waste bins. The current method for relocating these bins poses safety risks and requires significant manual effort. This project presents a conceptual solution that enables a single operator to efficiently and safely move roll-off bins using a custom-designed trailer system. The design incorporates three main subsystems: a trailer frame, an integrated winch system, and an off-the-market puller device to guide and secure the bin during transport. Two scaled proof-of-concept prototypes were fabricated to evaluate key aspects of the system's functionality. Testing and analysis suggested that the system is viable …

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Adjustable Dynamometer Motor Mount, Garrett Carson Ng, Elijah Siegel Reuven, Ethan Fong, Daniel Larimer

Mechanical Engineering

The Cal Poly Electrical Engineering Department and sponsor Dr. Dolan needs a manufacturable motor fixture that securely aligns motors of various sizes with dynamometers. Previous lab motor fixtures could not accommodate motors of different sizes, making precise alignment between motors and dynamometers time-consuming and unreliable. Our team developed a modular, manufacturable fixture capable of aligning various motor sizes quickly, accurately, and securely, enhancing lab consistency and usability.

Helical Products Parts Display Stand, Binh Nguyen, Emily Yuan Mendyke, Zoe Porter

Mechanical Engineering

Helical Products needs a new product display stand that will demonstrate their custom springs, couplings, and u-joints. Their current display stand, a marble run contraption, is large, loud, and difficult to transport, so they would like the new stand to remedy these issues. The goal of this senior project is to create a display stand that captures the attention of their customers with dynamic product demonstrations while addressing the issues outlined above.

The new display stand is also a marble run contraption, but instead of being almost 4 feet tall and 3 feet long, it is 23” tall, 26.25” long, …

Development Of Planetary Drive System For Formula Sae Electric Race Car, Brian Wong, Bradley Maruoka, Joshua Charles Fine, Madison Kai

Mechanical Engineering

Hub motors are compact electric motors mounted directly on each outboard wheel hub. Utilized in Formula SAE and Formula Student vehicles, this configuration offers several advantages over traditional drivetrains, including packaging optimization within the chassis, vehicle traction, and improved efficiency. Although hub motors are not yet common in 4WD vehicles, they are being explored for use in EVs and may become more common in the future. Every year, Cal Poly Racing FSAE designs and builds a formula-style race car. To improve drivetrain performance, the team is investigating the achievability of a hub motor 4WD drivetrain, requiring extensive research, development, and …

Hitch Cart “Landing Gear”, Rebekah White, Jose Raygoza, Randy Hernandez, Brandon Leon

Mechanical Engineering

This report aims to allow our sponsor, to review our design process of the Hitch Cart Landing Gear Prototype. In the design overview section of this report, we discuss the primary design modifications we made to the wheel mechanism of the existing hitch cart prototype, including the addition of the ACME screws and the folding brackets. This allows our sponsor to see the intended improvements made to the past prototype and understand the primary goal of our project. Then, in the implementation section, we cover the entire manufacturing process to allow our sponsor to understand what manufacturing steps must be …

The Waterbug: Adaptive Paddle Board Frame, Remy James Elio Lacchia, Katie Kellum, Madeline Evenson, Shelbi Sullaway

Mechanical Engineering

People with disabilities, particularly wheelchair users, face limitations in participating in outdoor activities like paddleboarding. Central Cal Adaptive, a nonprofit organization, aims to bridge this gap by offering adapted paddleboarding experiences. However, their current paddleboard presents challenges such as portability, range of motion, stability, and safety. Our team, comprising Madeline Evenson, Remy Lacchia, Katie Kellum, and Shelbi Sullaway, has collaborated with Central Cal Adaptive to refine the existing paddleboard design. The team’s goal is to enhance the paddleboard's functionality to better cater to wheelchair users' needs, ensuring lightweight, portable, and safe features for an improved outdoor experience.

Our paddleboard concept …

Cal Poly Bsae Brake Caliper, Carter Henry Foye, Benjamin Leistiko, Nathan Berger, Colin Williams

Mechanical Engineering

In the past, the Cal Poly Racing Baja SAE team has used off-the-shelf brake calipers for their vehicle. Off the-shelf calipers have been either oversized, resulting in a heavy and hard to package system, or undersized, resulting in an unreliable system that does not provide adequate braking power. The goal of this project was to provide a caliper that meets the requirements of Cal Poly’s Baja SAE team. Our final design consisted of a two piece CNC machined caliper that uses the complex piston seal geometry from an existing mountain bike brake caliper. Using an existing caliper as a reference …

Liftwalker, Kai A. De La Cruz, Lexie Caterine, Adam Monroe, Jame Whealan

Mechanical Engineering

The LiftWalker’s purpose is to lift users with degenerative diseases from a seated to standing position and support them as they practice the motion of walking as a form of physical therapy. The current LiftWalker is upward of $5,000 so we redesigned the LiftWalker to be more accessible around the world. This meant using affordable and accessible materials and manufacturing processes. To achieve this, we made our design mostly out of bike parts and off-the-shelf components. When it came to the lift system, we found that to maintain a safe and comfortable design it was best to purchase a trailer …

Pitot Tube Test Bench, Jesus Perez, Zachary Owen, Adrian Lopez

Mechanical Engineering

This Final Design Review documents the senior design project carried out by a team of Mechanical Engineering students attending California Polytechnic State University, San Luis Obispo for Roger Benham, and his company Leak Control Services Inc. The requirement was to design, build, and validate the performance of a test fixture that quantifies the performance characteristics of flow rate and pressure drop of different pitot tube designs to be used in a chemical dispensing application for Mr. Benham. This document includes relevant background research on the need for the fixture as well as relevant technical research. This document also contains objectives …

Turbine Integrated Pitching System, Elizabeth Costley, Josephine Maiorano, Jeff Larson, Cameron Jackson

Mechanical Engineering

The Cal Poly Wind Power Club (CPWP) tasked this senior project to design, manufacture, test, and deliver a mechanism to pitch the blades for their small-scale horizontal axis wind turbine. CPWP competes in the Collegiate Wind Competition (CWC) against schools across the country, and as such it was critical to comply with the provided competition rules in addition to the design requirement from CPWP. The purpose of the pitching mechanism is to improve the performance and efficiency of the wind turbine by allowing the blades to adjust angles with different wind speeds. Specifically, this project aimed to minimize hub size, …

Headlamp/Bike Light Damping System, Ethan Reece Clark, Alec Stonehouse, Omeed Ostry, Mitchel Anderson

Mechanical Engineering

The task for this project is to design a headlamp and/or bike light that absorbs the impact shocks from the user’s actions. The user that the system is being designed for may be riding a bike or running on a trail in the evening or early in the morning where the light needs to be stabilized and their path must be illuminated. This report presents the final design chosen after months of prototyping and design iteration. It encompasses the system design, design verification through testing, implementation, future recommendations, and lessons learned throughout the process. The chosen design utilizes a fully …

Disc Golf Throwing Robot, Nevada S. Schultz, Sydney M. Lewis, Erick Edmundo Daza, Rachel Alysse Greenberg, Peter M. Kean

Mechanical Engineering

Disc golf companies need better methods to test disc flight. The scope of this project is to create a disc throwing robot that can throw a disc golf driver 450-500 feet, with control over the speed, spin, and release angle. Research shows that multiple disc-throwing products exist; however, none meet the full requirements of this project. The Cal Poly senior project design team created a proof-of-concept machine. This prototype started as a two-wheel mechanism. Eventually, a third wheel was added, allowing for complete control over disc spin. The three-wheel prototype reached 62 mph when perfectly calibrated. The prototype is accurate, …

Mechanics Desktop Lab Equipment, Dante Azpilcueta, Quentin F. Mormann, Arfan Ansar

Mechanical Engineering

This paper overviews the design, implementation and testing of a senior project designed to fix the issue of there being no lab equipment or space for content pertaining to mechanic of materials topics. This is of concern as Cal Poly is reorganizing content as it switches to the semester system and is in need of labs for this material. The solution found was to create a portable miniature universal test machine that could be carted into non-lab classrooms. The goal was to create a device that was low-cost, modifiable, durable, easy to manufacture and repair as these were the qualities …

Valve Efficiency Testing Device, Jake Robert Rydberg, Andrew Keith Willardson, Jake Ben Jezier, Emily Marie Wannenmacher

Mechanical Engineering

This document serves as the official Final Design Review (FDR) for the mechanical engineering team on the Valve Efficiency Testing Device project for the Phillips 66 Rodeo Refinery. The team attends California Polytechnic State University, San Luis Obispo. The project involved designing and building a valve efficiency testing device. The goal was to create a finished test device that can be used in the Phillips 66 Rodeo Refinery machine shop to test reciprocating compressor valves before they are installed. The purpose of this document is to describe the manufacturing and design verification activities that have been completed since Critical Design …

Mechanical Metamaterials, Brent A. Peluso, Oliver T. Parker

Mechanical Engineering

Mechanical metamaterials are an emerging design strategy aimed at tailoring lattice structures to achieve specific properties such as negative Poisson’s ratios and guiding wave propagation. These metamaterials have received increasing attention from various application domains, including medical devices, aerospace, automobile, and infrastructure. The scope of this project is to vary a single lattice parameter and quantify its effect on the structural properties of the given 3D lattice.

Gasifier Wall Wash Manifold, Ashley Sieu Che, Gintaras Julius Baipsys, Peyton Joseph Archibald, Michael Thomas Kieran

Mechanical Engineering

The objective of our Gasifier Wall Wash Manifold Project is to design three different manifolds that will uniformly distribute water on the inner diameter of a pressure vessel. Also, the distributed water should completely cover the circumference of the inner walls. From extensive research of current solutions as well as the conduction of technical analyses, we were able to produce three designs that would be able to meet our engineering specifications. Time constraints led to the fabrication of one manifold design along with a test rig. With a fully functional test rig, we saw positive results from our design verification …

Novel Hitch Cargo Cart, Cesilio Sanchez Ramirez, Lance Haidet, Richard Lontoc, Tyler Selinka

Mechanical Engineering

This document presents the engineering design process used to develop, manufacture, and test a new and improved iteration of a hitch cart prototype. This process was performed by a team of four mechanical engineering seniors as part of California Polytechnic State University, San Luis Obispo’s senior design pathway. The goal of this project was to develop a sturdy and reliable iteration of our sponsor’s hitch cart prototype, that integrated the functionality of a vehicle hitch cargo platform and that of a height adjustable cargo cart into a single streamlined and easy to use product. This design could be used by …

Novelty Ice Cream Assembly Prototype, Mason Sylvester, Logan Williamson, Alvaro Martinez, Adin Gilman-Cohen

Mechanical Engineering

Cool Beans USA is a novelty ice cream startup company founded by Keith Zachow. In the winter of 2022, our team began working with Mr. Zachow to develop a machine to automate parts of the production process for his product. This product consists of two hemispherical ice-cream cone shell halves filled with soft serve ice cream and pressed together. The assembled pods are around the size and shape of a small walnut and are intended to be sold in stores as a frozen finger food. At the time of project inception, this product was in its early stages and was …

Barker Bird Animatronic Senior Project Report, Marcus Monroe, Nolan Clapp, Ishan Jandaur, Jonathan Ogden

Mechanical Engineering

This document describes how our F71 Senior Design Project team developed a 3D printed, electronic bird that mimics Disneyland’s first animatronic, the Barker Bird. An animatronic is a mechanical puppet that replicates real life movement with robotic parts. Disney’s Barker Bird is a well-known animatronic that replicates a talking macaw with multiple moving systems. The final prototype completed by our team serves as a teaching tool for CAPED (Cal Poly Amusement Park Engineers and Designers) club members that are interested in the field of animated robots.

Interactive Lego Girl Scout Arm, Christopher Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Universal Tread For Power Wheelchairs, Daniel Ceja Gonzalez, Ryan Scarcella, Aaron Rocha, Brian Song

Mechanical Engineering

This project was centered around developing a fully independently driven powered wheelchair attachment that would allow users to traverse non-wheelchair accessible terrain. The initial goal was to create a full-scale model that would allow our user to use and test as a prototype to get over curbs and some light dirt off-roading. However, as the project progressed and limitations of time and money came up, this project was rescoped to a quarter-scale proof of concept model. The goal of this new project was to create a prototype that would carry a scaled-down load and traverse a scaled-down curb. This was …