Acoustics, Dynamics, and Controls Commons^™

Wave Propagation In Metamaterial Using Multiscale Resonators By Creating Local Anisotropy, Raiz U. Ahmed, Sourav Banerjee

Faculty Publications

Directional guiding, passing or stopping of elastic waves through engineered materials have many applications to the engineering fields. Recently, such engineered composite materials received great attention by the broader research community. In elastic waves, the longitudinal and transverse motion of material particles are coupled, which exhibits richer physics and demands greater attention than electromagnetic waves and acoustic waves in fluids. Waves in periodic media exhibit the property of Bragg scattering and create frequency band gaps in which the energy propagation is prohibited. However, in addition to the Bragg scattering, it has been found that local resonance of artificially designed resonators …

Age-Related Changes To The Production Of Linguistic Prosody, Daniel Richard Barnes

Open Access Theses

The production of speech prosody (the rhythm, pausing, and intonation associated with natural speech) is critical to effective communication. The current study investigated the impact of age-related changes to physiology and cognition in relation to the production of two types of linguistic prosody: lexical stress and the disambiguation of syntactically ambiguous utterances. Analyses of the acoustic correlates of stress: speech intensity (or sound-pressure level; SPL), fundamental frequency (F0), key word/phrase duration, and pause duration revealed that both young and older adults effectively use these acoustic features to signal linguistic prosody, although the relative weighting of cues differed by group. Differences …

Monitoring Damage Initiation And Growth In Composite Structures By Acoustic Emission Method, Kassahun Mekonnen Asamene

Dissertations

In this dissertation, acoustic emission technique is examined as candidate for monitoring the integrity of polymer matrix structural members. Acoustic emission technique has so far been largely limited to laboratory tests and field applications have been mostly limited to qualification tests of aerospace structures. The lack of quantitative indications of damage in composite structural members associated with the complex nature of damage in these materials has been a limiting factor. Generally, a number of failure modes operate simultaneously at a site of damage, and each of these failure modes generates a different type of acoustic emission signal. In addition, issues …

Developing A System For Blind Acoustic Source Localization And Separation, Raghavendra Kulkarni

Wayne State University Theses

This dissertation presents innovate methodologies for locating, extracting, and separating multiple incoherent sound sources in three-dimensional (3D) space; and applications of the time reversal (TR) algorithm to pinpoint the hyper active neural activities inside the brain auditory structure that are correlated to the tinnitus pathology. Specifically, an acoustic modeling based method is developed for locating arbitrary and incoherent sound sources in 3D space in real time by using a minimal number of microphones, and the Point Source Separation (PSS) method is developed for extracting target signals from directly measured mixed signals. Combining these two approaches leads to a novel technology …

Assessing And Mitigating Airborne Noise From Power Generation Equipment, Limin Zhou

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation examines the assessment and mitigation of airborne noise from power generation equipment.

The first half of the dissertation investigates the diagnosis and treatment of combustion oscillations in boilers. Sound is produced by the flame and is reflected downstream from the combustion chamber. The reflected sound waves perturb the mixture flow or equivalence ratio increasing the heat release pulsations and the accompanying sound produced by the flame. A feedback loop model for determining the likelihood of and diagnosing combustion oscillations was reviewed, enhanced, and then validated. The current work applies the feedback loop stability model to two boilers, which …

Decentralized Adaptive Control For Uncertain Linear Systems: Techniques With Local Full-State Feedback Or Local Relative-Degree-One Output Feedback, James D. Polston

Theses and Dissertations--Mechanical and Aerospace Engineering

This thesis presents decentralized model reference adaptive control techniques for systems with full-state feedback and systems with output feedback. The controllers are strictly decentralized, that is, each local controller uses feedback from only local subsystems and no information is shared between local controllers.

The full-state feedback decentralized controller is effective for multi-input systems, where the dynamics matrix and control-input matrix are unknown. The decentralized controller achieves asymptotic stabilization and command following in the presence of sinusoidal disturbances with known spectrum. We present a construction technique of the reference-model dynamics such that the decentralized controller is effective for systems with arbitrarily …

Advanced Studies On Transfer Impedance With Application To After-Treatment Devices And Micro-Perforated Panel Absorbers, Xin Hua

Theses and Dissertations--Mechanical and Aerospace Engineering

This work is primarily comprised of five self-contained papers. Three papers are applications oriented. A common element in the first three papers is that micro-perforated panels (MPP), the permeable membranes in diesel particulate filters, and a source impedance are all modeled as a transfer impedance. The first paper deals with enhancing the performance of micro-perforated panels by partitioning the backing cavity. Several different backing schemes are considered which enhance the performance without increasing the total volume of the MPP and backing. In the second paper, a finite element modeling approach is used to model diesel particulate filters below and above …

Experimental Investigation To Inform Optimal Configurations For Dynamic Near-Field Passive Uhf Rfid Systems, Donnie E. Proffitt Ii

Theses and Dissertations--Mechanical and Aerospace Engineering

RFID has been characterized as a “disruptive technology” that has the potential to revolutionize numerous key sectors. A key advantage of passive RFID applications is the ability to wirelessly transmit automatic identification and related information using very little power. This paper presents an experimental investigation to inform the optimal configuration for programming passive ultra-high frequency (UHF) RFID media in dynamic applications. Dynamic programming solutions must be designed around the tag’s functionality, the physical programming configuration and environment. In this investigation, we present a methodology to determine an optimal configuration to maximize the systems programming efficiency for dynamic applications.

Binaural Room Impulse Response Database Acquired From A Variable Acoustics Classroom, Zhao Peng, Siu Kit Lau, Lily M. Wang, Sean Browne, Kenneth P. Roy

Durham School of Architectural Engineering and Construction: Faculty Publications

Room measurements were conducted in a variable acoustics classroom mockup space (epod) at Armstrong World Industries in Lancaster, Pennsylvania, USA. Binaural room impulse responses were measured in the epod using a head and torso simulator. Five reverberation time (RT) scenarios were achieved with various combinations of absorptive wall panels and acoustical ceiling tile. These provided a range of mid-frequency RTs from 0.4 to 1.1 seconds. Three of the five RT scenarios were achieved using two different material configurations to also consider material location effects. For each of the eight material configurations, two student-teacher orientations were tested. One orientation had all …

Structure Borne Noise Analysis Using Helmholtz Equation Least Squares Based Forced Vibro Acoustic Components, Logesh Kumar Natarajan

Wayne State University Dissertations

This dissertation presents a structure-borne noise analysis technology that is focused on providing a cost-effective noise reduction strategy. Structure-borne sound is generated or transmitted through structural vibration; however, only a small portion of the vibration can effectively produce sound and radiate it to the far-field. Therefore, cost-effective noise reduction is reliant on identifying and suppressing the critical vibration components that are directly responsible for an undesired sound. However, current technologies cannot successfully identify these critical vibration components from the point of view of direct contribution to sound radiation and hence cannot guarantee the best cost-effective noise reduction.

The technology developed …

Automated Extraction And Classification Of Time-Frequency Contours In Humpback Vocalizations, Hui Ou, Whitlow W.L. Au, Lisa M. Zurk, Marc O. Lammers

Electrical and Computer Engineering Faculty Publications and Presentations

A time-frequency contour extraction and classification algorithm was created to analyze humpback whale vocalizations. The algorithm automatically extracted contours of whale vocalization units by searching for gray-level discontinuities in the spectrogram images. The unit-to-unit similarity was quantified by cross-correlating the contour lines. A library of distinctive humpback units was then generated by applying an unsupervised, cluster-based learning algorithm. The purpose of this study was to provide a fast and automated feature selection tool to describe the vocal signatures of animal groups. This approach could benefit a variety of applications such as species description, identification, and evolution of song structures. The …

Project Haiti 2012: Providing An Experiential Learning Experience Through The Design And Delivery Of A Water Purifier In Haiti, Yung Wong, Johnathon Camp, Shavin Pinto, Kyle Fennesy, Marc Compere, Yan Tang

Publications

In this paper, we share our experiences and lessons learned from Project Haiti 2012, a project to design and install a water purification system serving 20,000 people per day in the largest tent city in Haiti. Project Haiti 2012 was the third and largest system we have built for Haitians and represents a huge success for all participants and stakeholders. This paper discusses the unique experiential learning opportunity involved in the design and delivery of the water purifier in a foreign developing country. Multiple positive educational, social, and economic outcomes were achieved including students applying knowledge gained from coursework towards …