Mechanical Engineering Commons^™

The Shoulder Effect In The Stagnation Zone For Temperature-Controlled Jet Impingement Transition Boiling Of Submerged Dielectric Fluid, Tyler P. Stamps, Justin A. Weibel

CTRC Research Publications

Two-phase jet impingement is capable of high heat transfer coefficients and high boiling critical heat flux (CHF) limits, making it a suitable technology for electronics immersion cooling applications. Previous studies have focused on the heat-flux-controlled nucleate boiling performance of an impingement jet up to the CHF. Exploration of other boiling regimes that occur under temperature-controlled surfaces is of equal fundamental importance. It has been shown for free jets that a high and consistent heat flux can be dissipated over a wide range of surface superheats in the transition boiling regime when the surface is temperature-controlled. This so-called “shoulder effect”, or …

Heat Treatment Post-Processing For The Improved Mechanical Properties Of Scalmalloy® Processed Via Directed Energy Deposition, Rachel Boillat-Newport, Sriram Praneeth Isanaka, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

As high-strength aluminum alloys present several processability issues with additive manufacturing (AM), Scalmalloy®, an Al-Mg-Sc-Zr-based alloy, has been developed. This alloy is age-hardenable, allowing it to precipitate out a strengthening precipitate phase, Al3(Sc,Zr). The manufacturer recommends a single-stage aging treatment at 325 °C for 4 h; however, the majority of the literature studies utilize a powder bed processing known as selective laser melting (SLM) over powder-fed processing directed energy deposition (DED). This study addresses the lack of information on heat treatments for DED fabrication by exploring the application of artificial aging temperatures of 300–400 °C for 2, 4, and 6 …

Investigating Near-Field Radiative Heat Transfer With Titanium Carbide Mxenes And Slanted Columnar Thin Films, Sean Luke Murray

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This work investigates the mechanisms to manipulate and control the magnitudes of Near-Field Radiative Heat Transfer (NFRHT) using two-dimensional materials and nanostructured surfaces. NFRHT occurs when the geometrical features of the radiating objects or the separation distance between interacting bodies are comparable to or lower than the characteristic thermal radiation wavelength. NFRHT magnitudes surpass the blackbody limit by several orders of magnitude due to phenomena such as photon tunneling and new modes of energy transfer, like surface polaritons. Therefore, it is crucial to understand how material properties and surface nanostructures affect NFRHT.

The first part of this work examines the …

Review Of Fourth-Order Predictive Modeling And Illustrative Application To A Nuclear Reactor Benchmark. I. Typical High-Order Sensitivity And Uncertainty Analysis, Dan Gabriel Cacuci, Ruixian Fang

Faculty Publications

This work (in two parts) will review the recently developed predictive modeling methodology called “4th-BERRU-PM” and its applicability to nuclear energy systems as exemplified by an illustrative application to the Polyethylene-Reflected Plutonium (acronym: PERP) OECD/NEA reactor physics benchmark. The acronym 4th-BERRU-PM designates the “Fourth-Order Best-Estimate Results with Reduced Uncertainties Predictive Modeling” methodology, which uses the Maximum Entropy (MaxEnt) principle to incorporate fourth-order experimental and computational information, including fourth (and higher) order sensitivities of computed model responses to model parameters, while yielding best-estimate results with reduced uncertainties for the first fourth-order moments (mean values, covariance, skewness, and kurtosis) of the optimally …

Experimental And Computational Investigation Of Green Laser Propagation Through Turbulent Medium In A Water Tank, Richard Owusu Adansi

Open Access Theses & Dissertations

Turbulence medium poses significant challenges to the propagation of laser beams, impacting applications such as free-space optical communication, remote sensing, and laser weapons systems. Therefore, comprehending and mitigating turbulence effects are vital for enhancing the performance of these systems. Analysis of a strong turbulence impact on electromagnetic wave propagation requires extensive knowledge of the Earth's atmospheric and Oceanic phenomena and Maxwell's electromagnetic theory of light as a propagating wave of electric and magnetic fields. Optical systems' propagation often encounters Strong Turbulence, causing interference and diffraction. Nonetheless, light propagation through randomly fluctuating media has been an exciting and active area of …

Reactive Processing Of Hf-Nb-Ti-Ta Melts Into A B4c/C Packed Bed, Laura Leticia Sandoval

Open Access Theses & Dissertations

The reactivity of liquid Hf-Nb-Ti-Ta alloy in B4C/C packed bed to form boride-carbide precipitates for ultra-high temperature ceramics was investigated at 2800 K. The objectives were to predict the thermodynamic phases formed and verify them with microstructural characterization. A pseudo-isopiestic technique was used to significantly lower the oxygen potential as the liquid Hf alloy infused and reacted into a B4C packed bed within a graphite enclosure. The technique had a low temperature region (at 1300 K) to control the oxygen potential with a Y-Al/Y2O3-Al2O3/carbide mixture as a liquid Hf alloy at 2800 K and reacted with B4C/C. In addition, any …

Moving Towards The Electrification Of Medium- And Heavy-Duty Vehicles In The Inland Empire, Kimberly Collins, Raffi Der Wartanian, Francisca Beer, Yunfei Hou

Mineta Transportation Institute

This report investigates the transition to zero-emission medium- and heavy-duty vehicles (MDHD) within California’s Inland Empire (IE), emphasizing the significance of electric vehicle charging infrastructure and opportunity charging strategies in facilitating sustainable transportation. Utilizing a mixed-methods approach that combines a systematic literature review, geospatial and big data analytics, and thematic analysis of expert interviews, the study explores the multifaceted challenges and opportunities of electrification. The literature review assesses policies at various governance levels, while geospatial analysis identifies regional traffic patterns and infrastructure needs. Big data analytics examine vehicle movements, complemented by insights from interviews with 16 regional experts, offering a …

Multimodal Boiling Dataset With Synchronized Acoustic, Optical, And Thermal Measurements Under Steady-State And Transient Heat Loads, Hari Pandey, Changgen Li, Han Hu

Mechanical Engineering Faculty Publications and Presentations

Boiling is a high-performance heat dissipation process that is central to electronics cooling and power generation. However, there exists a practical limit of boiling heat transfer known as the critical heat flux (CHF), beyond which significant performance degradation is observed. Understanding the physical mechanism that triggers CHF is essential to meet the increasing cooling demands driven by power densification and device miniaturization. However, the high dimensionality, stochasticity, and dynamicity of the boiling process have led to strong challenges in the experimental characterization and modeling of boiling CHF. As such, high-frame rate, high-resolution, multi-physics boiling datasets are critical to advancing the …

Synthesis Of Silica-Encapsulated Myristic Acid Phase-Change-Assisted Nanocapsules For Thermal Management Applications, Muhammad Ghufran, David Huitink

Mechanical Engineering Faculty Publications and Presentations

Myristic acid-based silica (MA/SiO₂) nano-encapsulated phase change materials (NePCMs) were synthesized by the sol–gel process. Five different samples of the MA/SiO₂ nanocapsules were prepared by varying the mass of the myristic acid. The nanocapsules were characterized by Fourier transform infrared spectrophotometer (FTIR), X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), energy dispersive X-ray (EDX), and dynamic light scattering (DLS). These characterization techniques confirmed the successful encapsulation of the myristic acid inside the silica shell. The maximum latent heat was found to be 114.46 J/g for the sample which was prepared with 25 g myristic …

Modeling, Simulation, And Experimental Testing Of A Single-Legged Hopper, John Anthony Bennett

Master's Theses

Legged robots are well-suited for navigating unstructured terrain due to their ability to perform agile dynamic motions. Building on the efforts of Cal Poly's Legged Robotics Group, this project focuses on achieving stable forward hopping with a single legged robot.

A comprehensive model of leg hopping is formulated, with leg dynamics during flight and stance phases derived using Euler-Lagrange equations. During the stance phase, a spring-mass system models the leg-ground interaction. The touchdown and lift-off conditions are formulated mathematically, and state mappings between phases are determined via momentum conservation. A two-phase hybrid controller is designed, incorporating trajectory planning during flight …

Hierarchy Of Exchange-Correlation Functionals In Computing Lattice Thermal Conductivities Of Rocksalt And Zinc-Blende Semiconductors, Jiacheng Wei, Zhonghao Xia, Yi Xia, Jiangang He

Mechanical and Materials Engineering Faculty Publications and Presentations

Lattice thermal conductivity (𝜅L) is a crucial characteristic of crystalline solids with significant implications for thermal management, energy conversion, and thermal barrier coating. The advancement of computational tools based on density functional theory (DFT) has enabled the effective utilization of phonon quasiparticle-based approaches to unravel the underlying physics of various crystalline systems. While the higher order of anharmonicity is commonly used for explaining extraordinary heat transfer behaviors in crystals, the impact of exchange-correlation (XC) functionals in DFT on describing anharmonicity has been largely overlooked. The XC functional is essential for determining the accuracy of DFT in describing interactions among electrons/ions …

Convex Approach To Data-Driven Optimal Control With Safety Constraints Using Linear Transfer Operator, Joseph Raphel Moyalan

All Dissertations

This thesis is concerned with the data-driven solution to the optimal control problem with safety constraints for a class of control-affine nonlinear systems. Designing optimal control satisfying safety constraints is a problem of interest in various applications, including robotics, power systems, transportation networks, and manufacturing. This problem is known to be non-convex. One of this thesis's main contributions is providing a convex formulation to this non-convex problem. The second main contribution is providing a data-driven framework for solving the control problem with safety constraints. The linear operator theoretic framework involving Perron-Frobenius and Koopman operators provides the convex formulation and associated …

Ultrashort Pulsed Laser Treatment Is Effective At Sterilizing Metal Surfaces For Planetary Protection, Kaleb Mcquillan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

To prevent forward contamination from microbes aboard spacecraft intended for exploration of solar system bodies there is a need for effective sterilization methods. However, current techniques are both time-consuming and expensive. For example, dry heat sterilization requires removal from the assembly site and several days of treatment. Furthermore, some components such as optics and electronics are not compatible with current sterilization techniques. In this thesis, a novel femtosecond laser surface processing technique for the rapid sterilization of spacecraft hardware is reported. Femtosecond lasers produce extremely high photon fluxes (10²⁹ photons/s*cm², ~0.03 J/cm²) in extremely short …

Natural Language Processing For Automated Sysml Diagram Generation, Joshua Andre Ontiveros

Theses and Dissertations

This thesis explores the applications of natural language processing (NLP) techniques in model-based system engineering (MBSE) to help generate System Modeling Language (SysML) diagrams. MBSE is a method that aids in enhancing traditional engineering practices by modeling to help improve understanding and communication in systems development. SysML, one of the modeling languages for MBSE, helps represent a system's architecture, behavior, and information flow. Translating systems requirements and specifications into SysML models can be time-consuming and can lead to errors when created manually. Automating the creation of SysML diagrams from textual descriptions with the help of NLP techniques can aid in …

Advancements In Aerial Vehicle Platforms: A Guide For Design, Validation, And Implementation Of 3d Printed Drones, Alan Salvador Urteaga

Theses and Dissertations

Additive manufacturing methods have revolutionized the way products are designed and developed through a product's entire design life cycle. This is in part correlated with the nature of additive manufacturing methods that differentiate them from traditional methods. Some of the benefits of additive manufacturing methods include customizability, rapid prototyping, the production of complex design geometry, and embedded assembly manufacturing. Unmanned aerial vehicles have been on the rise for various military, commercial, or personal applications. The focus of this study is to provide detailed instructions on how to engineer a viable drone design that is impact-resistant, modular, and customizable. This study …

In Situ Shear Exfoliation Of Layered Materials And Fabrication Of Multifunctional Composites, Md Abdur Rahman Bin Abdus Salam

Theses and Dissertations

To harness the extraordinary properties of 2D nanomaterials across a range of applications, including but not limited to device fabrication (such as sensors and transistors), energy storage and conversion systems (like batteries and solar cells), as well as biomedical applications (such as drug delivery and tissue engineering), it is imperative to achieve proper synthesis to single-layer form from bulk material, ensuring defect-free synthesis. Recognizing the criticality of defect-free synthesis and high yield for nanocomposite production, our focus centered on developing a facile, contamination-free, single-step, in situ shear exfoliation process for bulk materials (such as graphene, hBN, coal) within elastomers, which …

Feature Extraction From Vibration Signature Acquired From Railroad Bearing Onboard Condition Monitoring Sensor Modules, Kevin Quaye

Theses and Dissertations

The University Transportation Center for Railway Safety (UTCRS) has designed an onboard monitoring system that tracks vibration waveforms over time, to obtain a direct and more accurate indicator of bearing health. The data collected by these sensors is used for vibrational analyses of the bearings. The speed of the bearing is a fundamental parameter needed to carry out the analysis. GPS data can be used to determine bearing speed if available; however, due to size, cost and power constraints GPS is typically not available at the sensor location. This means that analysis must be delayed until the data is uploaded …

Bridging Human Emotion And Autonomous Vehicle Control: Reinforcement Learning Enhancements In The Carla Simulator, Timothy Marion Jude Lyons

Theses and Dissertations

Autonomous vehicles are a key component for an evolution in transportation as they may lead to increased safety and productivity. As autonomous vehicles advance industries will look to further increase customer satisfaction through personalized experiences for autonomous vehicle passengers. Reinforcement learning may be the key to success for autonomous vehicles. The development of autonomous vehicles, utilizing reinforcement learning, which consider the emotions of the passenger, will be a breakthrough for the automotive industry. This thesis presents a unique approach to autonomous vehicles developed with reinforcement learning which consider the human emotions of the passenger. It is a stepping stone to …

Attachment Of 2d Nanomaterials Onto 1d Nanofibers For Separation And Sensing Applications, Elmmer A. Vera Alvarado

Theses and Dissertations

Advancing materials for water desalination and sensing is essential for tackling global issues related to clean water and efficient energy systems. This thesis explores the application of 2D nanomaterials, specifically graphene, integrated onto 1D poly(vinylidene fluoride) (PVDF) nanofibers to enhance their effectiveness in these areas. Utilizing innovative techniques such as Forcespinning® and plasma treatment, PVDF nanofibers were strengthened with graphene and conductive polymers like poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT: PSS). The research involved thorough assessments using direct contact membrane distillation (DCMD) systems, oil-water separation tests, and various mechanical and electromechanical evaluations. Heat-pressed membranes consistently delivered a flux of 0.33 kg/m²/hr and …

Understanding The Microstructure And Tribological Performance Of Cocrfeni-Based High Entropy Alloys, Ali Azarmi

All Theses

Due to their higher wear resistance compared to conventional alloys, high entropy alloys (HEAs) are now being considered as candidates for parts undergoing sliding contact during their lifetimes. While the engineering field has built some knowledge related to the performance of selected high entropy alloys, such as the CoCrFeNi alloy, more research is needed to determine if (how) expansions from four to five principal alloying elements alter the performance compared to the initial alloy. In this study, we started this research effort by investigating the relative performance of CoCrFeNiMn and CoCrFeNiTi with respect to CoCrFeNi. The two primary alloying elements …

Predicting The Ductility Of Tungsten Based Bcc Refractory High Entropy Alloys: A Computational Science Driven Study, Akshay Korpe

All Theses

Bcc refractory high entropy alloys (HEAs) are a relatively new category of metallic alloys that promise excellent irradiation resistance and strength retention at high temperatures but exhibit brittle behavior at room temperatures limiting their formability. Understanding the deformation mechanisms and predicting their ductility at room temperature is a topic of interest in contemporary research.

In this work, multiple independent ductility criteria for quantifying the ductility of these HEAs were studied, calculated and compared using Density Functional Theory (DFT) calculations and continuum mechanics frameworks. These ductility parameters were calculated for various W-Ta-Cr-V alloys and the trends were analyzed for each criteria …

Developing An Assessment Tool For Ideation Effectiveness: A Survey-Based Approach For The Shah’S Method Of Design Space Exploration, Venkat Jaya Deep Jakka

All Theses

The research is focused on creativity in engineering design. The goal is to understand if creativity in engineering design can be assessed using a less resource-intensive approach, specifically a survey, compared to design exercises. The survey builds on the metrics established by Shah and colleagues. The four metrics are Novelty, Quality, Variety and Quantity. The metrics are measured with the help of a design activity that is deployed to the participants. These metrics have been used in comparative analysis to assess treatments such as new design methods and personality types. However, the downside of the metrics is that they require …

Smart Zoning Control For Air Conditioning Systems, Octavio Gomes Diaz

Mechanical Engineering Theses

Nearly 45% of the energy consumed in residential buildings goes for Heating, Ventilation, and Air Conditioning (HVAC). Typical HVAC systems are mostly controlled by one thermostat that is usually located in the living room. This means that the HVAC system is running without consideration of the thermal conditions in the other rooms (zones), which might be colder (or warmer). Colder zones in the summer indicate that a lot of energy is wasted, and warmer zones mean that the HVAC system can’t produce a good comfort level. Therefore, zoning was introduced into relatively recent HVAC systems. Zoning in HVAC systems uses …

Transient Heat Transfer To Rolling Or Sliding Drops On Inclined Heated Superhydrophobic Surfaces, Joseph Furner, Daniel Maynes, Brian D. Iverson, Julie Crockett

Faculty Publications

The thermal transport to drops that roll or slide down heated superhydrophobic surfaces is explored. High-speed infrared imaging is performed to provide time-resolved measurement of the heat transfer to the drop. Data are obtained for drops moving along smooth hydrophobic and structured superhydrophobic surfaces. Both post and rib style structures with surface solid fractions ranging from 0.06 to 1.0 are considered. The inclination angle of the surfaces was varied from 10 deg to 25 deg, and the drop volume was varied from 12 to 40 µL. The measurements reveal that the drop speed is a strong function of both the …

Development And 3d Printing Of Glass Fiber And Carbon Fiber Reinforced Shape Memory Polymer Composites For Structural Applications., Krishna Sai Aparna Munjuluri

Electronic Theses and Dissertations

This study aims at the development of shape memory polymer composites with two types of reinforcements, milled glass fibers, and chopped carbon fibers, for potential structural applications in aircraft and automotive industries. Glass fiber-SMP composites were made at fiber loading wt.% of 0%, 5%, 10%, and 20%. In contrast, carbon fiber-SMP composites were made at fiber loading wt.% of 0%, 5%, 10% and 15%. The feedstocks were extruded into filaments and characterized by their physical, rheological, chemical properties and morphologies. Fused Filament Fabrication 3D printing was used to manufacture specimens for mechanical testing of hardness and flexural properties. The findings …

Natural Fiber Reinforced Composites For Sustainable Additive Manufacturing., Athira Nair Surendran

Electronic Theses and Dissertations

Carbon fiber is widely known for its exceptional strength, making it a sought-after material in composite manufacturing, especially with thermosets and thermoplastics. Its major applications span aerospace, wind turbines, sports equipment, automotive interior and exterior parts, robotics and medical equipment. Recently, carbon fiber filament manufacturing has gained attention due to the availability of desktop 3D printers and the versatility and customizability that comes with the realm of 3D printing. Commercial carbon fiber production, primarily from polyacrylonitrile (PAN), is energy-intensive and derived from crude oil, contributing to significant environmental impacts and poor recyclability. Alternatively, lignocellulosic natural fibers present a possible sustainable …

Development And Processing Of Shape Memory Polymer Composites (Smpcs) For Application In Structural Robotics And Robotic Sensors., Kavish Sudan

Electronic Theses and Dissertations

Shape Memory Polymers (SMPs) have attracted significant attention since their introduction in the 1980s due to their remarkable ability to regain their original shape from a temporarily deformed state when exposed to an external stimulus, typically heat. This shape memory effect, driven by thermal transitions such as the glass transition temperature (T_g) or melting temperature (T_m), has made SMPs highly attractive for applications in soft robotics, aerospace, and biomedical devices. However, SMPs face challenges such as limited mechanical strength, thermal stability, and electrical conductivity, which hinder their broader adoption in advanced applications. To address these challenges, …

Synergistic Strategies In Hybrid Mxed Matrix 3d Printing Of Thermoplastics & Thermosets: Design, Manufacturing, And Materials Development., Saleh Akram Khanjar

Electronic Theses and Dissertations

Composite manufacturing and mixed matrix structures have been produced using traditional manufacturing processes for various industrial applications due to their high mechanical properties to material weight and cost ratio. However implementation of composite and mixed matrix manufacturing with advanced manufacturing such as additive manufacturing is limited due to the hardware limitations of current 3d printing technologies and materials available for 3D printing applications. This work has developed and investigated a new hybrid 3D printing manufacturing process utilizing a variety of material systems (thermoplastic – thermoset, thermoplastic – thermoplastic, thermoset – thermoset, thermoplastic – thermoplastic – thermoset). This study developed thermoplastic …

Selective Bacterial Biofilm Removal Using Image-Guided Detection And Cold Atmospheric Pressure Plasma, Michael Okebiorun

Boise State University Theses and Dissertations

This dissertation explores the use of cold atmospheric pressure plasma (CAP) technology in eradicating bacterial biofilms from tissue surfaces, using Ps. fluorescens on chicken tissue to model human chronic wounds. It introduces a novel image-guided technique for precise biofilm removal, employing trypan blue staining coupled with advanced computer vision analysis, enhancing the CAP treatment's precision and efficacy. The study demonstrates the CAP device's ability to effectively disrupt biofilms through a non-thermal mechanism, based on its electrical characteristics and operational parameters. The success of the treatment is evident in the significant reduction of biofilm thickness of 49 -185 µm, with the …

Fundamental Study Of Nonlinear Electrophoresis, Joseph Armakan Bentor

All Dissertations

Classical electrophoretic theory describes the linear response of particles suspended in Newtonian fluids under weak electric fields. When the electric field exceeds this weak limit, a nonlinear response arises due to non-uniform surface conduction over the curved particles. This nonlinear behavior introduces dependencies on fluid and particle properties not considered in the classical theory, offering potential advantages for microfluidic particle manipulation. While this phenomenon has been extensively studied theoretically and numerically in Newtonian fluids, experimental investigations have been relatively limited.

Fluid rheology can significantly alter particle dynamics under applied electric fields. Rheological properties like shear-thinning and elasticity which are not …