Mechanical Engineering Commons^™

An Image Processing Technique For Studying The Flame Structure Using Single Shots Of Oh-Plif Diagnostics, Hazem M. Al-Bulqini, El-Shafie B. Zeidan, Farouk M. Okasha, Mohy S. Mansour

Mansoura Engineering Journal

Laser diagnostic techniques have played a crucial role in enhancing our understanding of combustion processes. Among these techniques, Planar Laser-Induced Fluorescence (PLIF) utilizing OH radicals has proven to be a powerful tool for investigating reaction zones, flame curvature, and flame surface density in diverse flame modes including premixed, non-premixed, and partially premixed flames. However, to fully harness the potential of experimental measurements and laser diagnostics in studying combustion processes, a comprehensive grasp of image processing techniques and tools is essential for effectively analyzing captured images and extracting valuable information. In this study, we present a detailed algorithm that facilitates the …

Code To Combustion: Cnc Rotor Replication Using Cam, Luis Luna

Publications and Research

In the current landscape, computer-aided design (CAD) and computer numerical control (CNC) technologies have greatly enhanced manufacturing processes, allowing rapid and high-precision production. This project will focus on recreating a Wankel engine rotor, using SolidWorks for design and Mastercam for Computer-Aided Manufacturing (CAM) simulations. The process begins with SolidWorks, which is used for a template of a high-precision rotor model. Mastercam is then utilized for the CAM programming, allowing for the creation of intricate tool paths and tool usage simulations. This approach is vital for complex objects like the Wankel engine rotor, which demands high precision. The primary objective of …

Experimental And Modelling Of Lightning Damage To Carbon Fibre-Reinforced Composites Under Swept Stroke, Chengzhao Kuang, Kunkun Fu, Juhyeong Lee, Huixin Zhu, Qizhen Shi, Xiaoyu Cui

Mechanical and Aerospace Engineering Faculty Publications

Lightning swept stroke creates multiple lightning attachments along an aircraft in flight. This introduces distinct structural damage compared to that from a single-point lightning current injection test in laboratory. This study presents both experimental and numerical studies on lightning damage in carbon fibre-reinforced polymer (CFRP) composites under swept stroke. Coupled electrical–thermal finite element (FE) models were proposed to predict lightning damage to CFRP composites under single-point current injection and swept stroke, respectively. A lightning swept stroke testing method was proposed by embedding a copper wire inside the composites to simulate multiple lightning attachments on the composites. The FE-predicted damage from …

4d Printing Of Pla And Pla-Based Composites For Load-Bearing Applications, Phaniteja Nagaraju

ETD Archive

This research investigates the deformation recovery of 3D-printed Polylactic Acid (PLA) shape memory polymers (SMPs). The study delves into the influence of Fused Deposition Modelling (FDM) parameters, such as nozzle temperature, layer thickness, and printing speed, on the thermomechanical behavior of PLA SMP honeycomb structures. The research identifies optimal printing conditions using the Taguchi approach and explores the cyclic shape memory recovery behavior of the optimized PLA SMP under compression loads.

Additionally, the research includes a chapter on the extrusion and printing of uniform-diameter polylactic acid carbon fiber (CFR-PLA) composite filaments. The synthesis of CFR-PLA involves planetary ball milling for …

Capabilities Of Sintered Silver As A High Temperature Packaging Material, Bakhtiyar Mohammad Nafis

Graduate Theses and Dissertations

With electrification progressing across many sectors including industry, automotive and aerospace, the power density requirements are changing. The increased power density results in higher and higher ambient temperatures that electronics are exposed to. The response has been to move towards wide bandgap (WBG) semiconductor devices that can withstand much greater temperatures and can operate at much higher voltages than silicon. Additionally, these WBG devices deliver low drain-source on resistance (RDS_on) capabilities, enabling high current power modules that increase power density even further. This also requires the packaging to evolve in order to withstand the new requirements. As a result, researchers …

Development Of A Prototype Satellite-Tracking Telescope For Ground-Based Spectroscopy, Charles Smith

Graduate Theses and Dissertations

Spectroscopy is the practice of determining the chemical composition of a gas through analyzing the light that is filtered by the gas. Spectroscopy is commonly used by astronomers to deduce the atmospheric composition of planets. This process is done by initially measuring the spectrum of light from the star that the planet orbits, and then measuring it again once the planet is in between the observer and the star. The spectrum light that is filtered out is dependent on the chemical composition of the gas, and so this information can be used to determine the chemical composition of the atmosphere …

Silver Sintering Reliability And Its Enhancement For Use In High-Density Power Modules, Alicia Medina Garcia

Graduate Theses and Dissertations

This master's thesis is dedicated to enhancing the reliability of silver sinter die attachments, a pivotal component within the dynamic realm of power electronics. The study is meticulously organized into four distinct chapters, each contributing to a comprehensive understanding of silver sinter die attachment reliability and its implications for contemporary electronic packaging. In Chapter 1, an introduction is provided to the significance of silver sinter die attachment in the context of power electronics, underlining the imperatives associated with miniaturization, weight reduction, and heightened efficiency. The compelling need to investigate die attachment properties, particularly in high-temperature and high-power-density environments, is emphasized. …

Design And Demonstration Of An Inertial-Stabilized Single-Axis Headlamp For Mobile Systems, Thomas Avery Allsup

Mechanical and Aerospace Engineering Dissertations - Archive

The introduction of adaptive headlamps has added left and right movement of the headlamps to enhance the vision of the driver during a turn at night. Adaptive headlamps also allow up and down motion of headlamps in either two discrete positions with low and high beams based on vehicle speed and oncoming traffic lights or using the vehicle suspension measurement to adjust headlamp beam angles in any angle between low and high. Using the vehicle suspension ignores the roadway influence on where the headlamps should be positioned to illuminate the roadway for the driver. This dissertation develops governing equations and …

On The Development Of A Sensing System Methodology To Evaluate The Viscoelastic Properties Of Soft Tissues As A Means Of Disease Prognosis, Shashank S. Kumat

Mechanical and Aerospace Engineering Dissertations - Archive

Identification of tissue viscoelastic properties could provide valuable information for assessing its healthiness or disease state. Current technologies present challenges to access and perform localized tissue assessment in confined spaces in the human body through contact indentation/palpation. As such, there is a need for a diagnostic system capable of measuring tissue relaxation response at the local site by accessing the tissue through a natural orifice. This dissertation presents a strain gauge-based uniaxial micro-force sensor, part of the aforementioned system, capable of measuring tissue response data in confined human space environments. A sensing system design methodology is developed and presented. The …

Optimizing Energy Efficiency And Performance In High-Performance Computing Through Advanced Direct-To-Chip Liquid Cooling And Labview-Based Monitoring And Analysis, Chandraprakash Ashok Hinge

Mechanical and Aerospace Engineering Dissertations - Archive

This research endeavors to significantly enhance energy efficiency and performance in the realm of high-performance computing (HPC). This goal is pursued through a synergistic approach that leverages advanced direct-to-chip liquid cooling systems and integrates LabVIEW for real-time monitoring and analysis within data centers. The primary aims of this study are manifold. First, it seeks to evaluate the effectiveness of different single-phase liquid coolants when employed in direct-to-chip cold plate cooling for HPC systems. Additionally, the research focuses on characterizing row manifolds, crucial elements in the design of efficient data centers. The study also endeavors to devise a strategic control mechanism …

Multiple Dipole Source Position And Orientation Estimation Using Non-Invasive Eeg-Like Signals, Saina Namazifard

Mechanical and Aerospace Engineering Dissertations - Archive

The human brain comprises of neurons that connect with each other via electrical signals. One can record and measure these activities using an electroencephalogram (EEG). An essential use of the EEG is in locating the generating source of these signals, usually approximated by dipoles. This is important because, in some particular circumstances, neurons may not function optimally and could make the equivalent dipole generate abnormal signals. This could be a result of seizures or other brain disorders. In order to isolate such disorders, the challenge is to find a non-invasive way to locate the anomalous source. This research aims to …

Thermo-Mechanical Analysis Of Heterogenous Integrated Packages And Immersion Cooling Of Data Center Servers, Krishna Bhavana Sivaraju

Mechanical and Aerospace Engineering Dissertations - Archive

III-V materials such as Gallium Arsenide (GaAs) and Indium Phosphide (InP) are used as substrates for opto-electronic devices like vertical cavity surface emitting lasers (VCSEL), edge emitting lasers and light emitting diodes. System in Package integration of the III-V materials to silicon requires a reliable bonding technique. Though there are several bonding techniques like direct wafer bonding like hetero-epitaxially grown islands on a silicon wafer bonding enable the bonding, flip-chip bonding is used in this study owing to its superior electrical connectivity, mechanical reliability, heat conduction capability and ease of fabrication due to self-alignment. Finite element models of four different …

An Apparatus To Quantify Lengthwise Flexural Rigidity Profiles Of Endovascular Devices, Charles B. Suskin

McKelvey School of Engineering Graduate Student Theses & Dissertations

Endovascular procedures require access to distal anatomical sites through the vasculature using catheters and guidewires. Quantitative frameworks for device behavior during procedures hold the potential to drive device design through greater understanding of the mechanical behavior of endovascular devices, and offer the potential to personalize care based on a patient's particular vascular anatomy. However, data that would facilitate this technology are lacking, partly due to undisclosed material properties from manufacturers and partly due to the intricate variations along the length of each device due to material changes and the intersections between them. We developed a three-point bend test methodology on …

Enhanced Fabrication Of Microdroplet Generator Nozzle Arrays: Optimizing Koh Etching For Microfluidic Applications, Hongyu Bai

McKelvey School of Engineering Graduate Student Theses & Dissertations

Ultrasonic microdroplet generators are useful devices with broad applications ranging from aerosolized drug delivery to three-dimensional (3D) printing-based additive manufacturing. One such technology comprises a microfabricated array of nozzles with droplet production driven by a piezoelectric transducer. The present study focuses on refining a critical fabrication step, anisotropic wet etching of pyramidal nozzles using a basic potassium hydroxide (KOH) solution. Given the integral role of nozzle geometry in device operation, high-precision techniques including Reactive Ion Etching (RIE), Deep Reactive Ion Etching (DRIE), and KOH wet etching were employed. A tapering geometry is preferred for acoustic wave focusing and efficient droplet …

Model Of Surface Waves On A Viscoelastic Material In A Cylindrical Container With Edge Constraints, Phillip Wilson

All Theses

A theoretical model is developed for the resonant frequencies and mode shapes of pinned edge surface waves on a viscoelastic fluid contained in a finite depth cylindrical container. A boundary integral approach is used to map the governing equations to the domain boundary. The surface waves obey an eigenvalue operator equation that depends on four dimensionless parameters: the cylinder aspect ratio, the Bond number, the Ohnesorge number, and the elastocapillary number. A solution is constructed using a Rayleigh-Ritz variational procedure over a constrained function space, which is able to effectively incorporate the pinned edge boundary condition. Mode shapes are defined …

Thermal Atomization On Superhydrophobic Surfaces Of Varying Temperature Jump Length, Eric D. Lee, Daniel Maynes, Julie Crockett, Brian D. Iverson

Faculty Publications

This paper presents an experimental study of drop impingement and thermal atomization on hydrophobic and superhydrophobic (SH) surfaces. Superhydrophobic surfaces having both microscale and nanoscale geometry are considered. Microscale SH surfaces are coated with a hydrophobic coating and exhibit micropillars and cavities which are classified using the surface solid fraction and center to center pitch. The solid fraction and pitch values explored in this study range from 0.05-1.0 and 8-60 μm respectively. Nanoscale textured surfaces are created by applying a blanket layer of carbon nanotubes. Both types of surfaces are further classified by a temperature jump length (λ …

Cnc Retrofits, Fabian Samano, Murat Askin, Daniel Lonczak, Zane Campise

Mechanical Engineering

The Boxford CNC Lathe is a machine used for educational purposes. The goal of the CNC Retrofits project is to improve the Boxford MT2’s performance and functionality to enable Mr. Lonczak to manufacture customized ballpoint pens. Within this Final Design Review (FDR) document, we present design updates since the CDR and implementation/assembly techniques. This work culminates in a solution to Mr. Lonczak’s needs which is analyzed in three subsystems: main control, spindle position tracking, and user interface. Within this report, we show the results of each subsystem’s verification process. These results prove that the design concept was met by describing …

Thermal Resistance Characterization Of High-Voltage Sic Power Module, Landon Lemmons

Mechanical Engineering Undergraduate Honors Theses

Researchers within the University of Arkansas Electrical Engineering Research Department have embarked on a project aimed at enhancing the thermal performance of high-voltage power modules. To aid in the progress of this project, the design, and development of a thermal tester device are needed. The primary objective of this device is to determine the various thermal properties of high-voltage power modules that the electrical engineering department has developed. Additionally, the project aims to facilitate electrical loading tests on power modules and provide researchers with the means to calibrate the power module in terms of thermal load. This project also possesses …

Temperature Gradient Effect On Solid-Liqid Interface Properties Of Al-Cu Alloy: A Molecular Dynamics Study, Prashant Kumar Jha

All Theses

Aluminum-copper (Al-Cu) alloys are widely used in the aerospace industry due to their favorable strength-to-weight ratio, good fatigue resistance, and corrosion resistance. These properties make Al-Cu alloys an excellent choice for aircraft structural components that require high strength and low weight. Additive manufacturing (AM), also known as 3D printing, has emerged as a promising processing method for Al-Cu alloys in aerospace manufacturing. AM enables the production of lightweight optimized geometries difficult to manufacture through conventional subtractive methods. AM also reduces material waste by only depositing material where needed in the part geometry. The rapid solidification conditions in AM processes motivate …

Experimental Study On The Impact Of Low Thermal Inertia Thermal Barrier Coatings On Ppci-Diffusion Gci Combustion, Kunal Vedpathak

All Theses

The application of thermal barrier coatings (TBCs) has been studied in homogenous charge compression ignition (HCCI), conventional diesel combustion (CDC), and spark ignition (SI). Gasoline compression ignition (GCI) combines the low soot and NOx emissions of HCCI with combustion controllability through fuel stratification. GCI has become an interesting prospect due to the reduction in gasoline consumption due to the electrification and hybridization of the light-duty sector. It can be used as a preferred combustion mode in heavy-duty engines to reduce emissions with minimal modifications. GCI exhibits better combustion efficiency than HCCI. Advances in material technology have combined low thermal conductivity …

Finite Element Analysis On Laser Sintering Of Ceramic Materials, Shardul Sharma

All Theses

Laser sintering of ceramics plays a vital role in advanced additive manufacturing due to its precise fabrication of complex ceramic structures, localized heating and microstructural control. It allows the production of complex and customized ceramic parts for applications such as the aerospace industry and biomedical devices. However, due to the high thermal gradients produced during the process, laser sintering technology faces fundamental challenges, such as thermal stresses and crack formation. Establishing a valid numerical model to guide the ceramic laser sintering process, which predicts the thermal and mechanical behavior of the component, is necessary.

In this work, the modified Skorohod-Olevsky …

Deep Ocean Vehicle Applications And Modifications, Nichole "Nikki" T. Arm

Master's Theses

This project had two primary goals: (1) to explore opportunities to further a deep-ocean vehicle’s reach using alternative pressure spheres, and (2) to implement an existing deep-ocean vehicle (lander) in active scientific research.

I gained a greater understanding of the limitations and design choices made for existing pressure spheres using Finite Element Analysis (FEA). My simplified FEA model predicted sphere failure for the existing 30% Fiber Glass 70% Nylon injection molded spheres at an external pressure of 3,954psi or 2,690m ocean-depth (only a 7.38% error compared to the tested minimum failure depth), so I determined it a valid model. I …

Discourse Analysis In Engineering: Investigating Patterns In Brainstorming Conversations, Aimee Chiem

Master's Theses

Brainstorming is a critical part of the engineering design process and can have a significant impact on the outcomes of the overall project. While research has studied the outcomes of brainstorming and the ideas that teams generate, the role that language and conversation play in these activities is still relatively underexplored. Observing the different ways people use specific types of discourse can reveal how conversations can affect brainstorming itself. To that end, this research aims to answer the following questions:

1) What are the different kinds of discursive moves that students make during engineering brainstorming activities?

2) What patterns or …

Advanced Jet Impingement Cooling For Power Electronics, Reece Whitt

Graduate Theses and Dissertations

Convective heat transfer by jet impingement cooling offers a suitable solution for high heat flux applications. Compared to techniques that rely on bulk conduction in series with convection, direct liquid impingement reduces the thermal resistance between power device hot spots and the coolant. Using additive manufacturing processes, location specific jets can be integrated into high voltage power electronics systems. Custom manifolds can be designed to reduce pressure drop, while simultaneously fine-tuning the thermal management efficiency. Although capable of highly efficient cooling, static impingement devices must be designed for the worst-case cooling requirements for a transient power profile, possibly resulting in …

Accelerated Testing Of Solder Spheres Under Combined Temperature, Current, And Shear Stresses To Estimate Reliability, Collin Ruby

Graduate Theses and Dissertations

With the densification of power electronics in the pursuit of decreased size and weight and increased efficiency, the need to investigate the properties of solder in packages with higher working temperatures and power densities is becoming apparent. Many research groups have conducted accelerated testing using methods such as thermal aging, shear or tensile stress tests, or electromigration tests, but relatively little research exists that considers the impact of several stresses in a combined study. This work aims to produce a novel method for estimating the lifetime of SAC305 solder joints under a combined stress scenario, which more accurately depicts the …

Additive Manufacturing Of Composites For Sensing And Harsh Environments Application, Md Sahid Hassan

Open Access Theses & Dissertations

Composite materials are made by combining two or more materials, such as fibers and resins to create a material system that has improved mechanical and physical properties compared to its individual components. The use of 3D printing technology in composite manufacturing allows for the creation of complex and custom shapes with precise control over the placement of the materials. This makes it possible to create composite parts with enhanced performance characteristics and reduced weight. The work presented in this dissertation lies in the design and development of highly flexible impact propagation sensor through material extrusion 3D printing technique. By using …

Nonlinear Finite Element Model For Functionally Graded Porous Circular/Annular Micro-Plates Under Thermal And Mechanical Load, Enrique Nava Munoz

Masters Theses

A nonlinear finite element model for micro circular/annular plates under thermal and mechanical loading is developed using a third order shear deformation theory. In the kinematic assumptions, the change of plate thickness is allowed and no transverse shear strains are considered on the top and bottom surfaces. A power-law distribution is utilized to account for variations of two constituents through the thickness of the plate. Three different types of porosity distributions are considered. The strain gradient effect in micro scale structures is considered using the modified couple stress theory. The dynamic version of the principle of virtual displacements is used …

The Role Of Atomic Layer Deposited Coatings On Lithium-Ion Transport: A Comprehensive Study, Yufang He, Hiep Pham, Xinhua Liang, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Use of Ultrathin Film Coatings Prepared through Atomic Layer Deposition (ALD) Has Become Widespread for Improving Lithium-Ion Diffusivity of Active Particles, Which Plays a Crucial Role in Determining the Rate Capability of Lithium-Ion Batteries (LIBs). in This Study, the Impact of ALD Coating Thickness on Ionic Diffusivity in CeO2-Coated LiMn2O4 (LMO) Cathode Particles is Comprehensively Investigated through First-Principles Calculations by Focusing on the Trade-Offs between the Physical Properties of the Film and its Impact on the Diffusivity of Ions. Our Findings Indicate that Several Physical Factors Affect the Diffusivity of the Coating, Including the Crystal-Amorphous Structure that Depends on …

Microstructure, Mechanical Properties And Oxidation Behavior Of Refractory Multi-Principal Element Alloys By Laser Remelting And Conventional Manufacturing, Visharad Jalan, Seth Crawford, Sung Heng Wu, Frank Liou, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Refractory multi-principal element alloys (RMPEAs), HfNbTaTiZr, (HfNbTaTiZr)9Cr, and (HfNbTaTiZr)9Al, were manufactured using vacuum arc melting followed by laser remelting to mimic additive manufacturing. the microhardness of the as-cast HfNbTaTiZr, (HfNbTaTiZr)9Cr, and (HfNbTaTiZr)9Al samples after arc melting was measured as 6.20, 7.63, and 6.89 Gpa, respectively. after laser remelting and re-solidification, the hardness increased by ~ 30% for each composition; the hardest was (HfNbTaTiZr)9Cr measured at 9.60 GPa, while the softest was HfNbTaTiZr with a hardness of 8.42 GPa, which was still harder compared to all the other samples. the addition of Al and Cr led to enhanced oxidation resistance for …

Effects Of Simultaneous Co2 Addition To The Fuel And Oxidizer Streams On Soot Formation In Co-Flow Diffusion Ethylene Flame, Yu Yang, Shu Zheng, Yuzhen He, Hao Liu, Ran Sui, Qiang Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Soot formation in a co-flow diffusion ethylene flame with the addition of CO₂ to the fuel (the CO₂-F), oxidizer (the CO₂-O), and fuel/oxidizer (the CO₂-F/O) streams was numerically and experimentally investigated in this study. The effects of different CO₂ addition ways on soot inception, soot condensation, H-abstraction-C₂H₂-addition (HACA) and oxidation by O₂/OH processes, were quantitatively analyzed by introducing the integrated reaction rates over the whole computational domain. The simulated and experimental results showed that the CO₂-F/O was the most effective in inhibiting soot formation …