Mechanical Engineering Commons^™

Two-Dimensional Modeling Of Nonlinear Dynamics Of Forcespinning Jet Formation, Dumitru I. Caruntu, Simon Padron, Karen Lozano

Mechanical Engineering Faculty Publications

Forcespinning is a novel method that makes use of centrifugal forces to produce nanofibers rapidly and at high yields. To improve and enhance the forcespinning production method, a 2D computational forcespinning inviscid fluid dynamics model is developed. Two models, namely, time-independent and time-dependent, are obtained in order to investigate the effects of various parameters on fiber forcespinning formation (trajectory, jet diameter, tangential velocity). The fluid dynamics equations are solved using the method of multiple scales along with the finite difference method and including slender-jet theory assumptions. It is important to produce jets with small diameters in the micro- and nanorange. …

Effect Of Additional Weight On Stability Of Human Squat Exercise, Jose De Jesus Galarza Lozano

Theses and Dissertations

The main focus of the study is to analyze the stability of the squat exercise. The squat is a common exercise that persons do for exercise. The study analyze the time series of the normal component of the ground reaction forces and each coordinate of the center of pressure. Theses time series are used to estimate the Lyapunov Exponents using Rosenstein method. MATLAB from Mathworks is used to calculate the graphs and program the methods. We compare this result with the literature and previous experiments. This work gives more information relating the safety of the squat exercise when …

Toward An Understanding Of Fundamental Mechanisms In Transitional And Turbulence Flow Control, Ethan A. Davis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Turbulence is an emergent phenomenon found throughout nature and engineering, alike. It plays a vital role in the aquatic locomotion of organisms, scalar mixing, fluid transport, shipping and transportation, and even the flow of biological fluids in the human body. Therefore, it is of utmost importance in both a practical and engineering sense to better understand turbulence with the goal of better controlling it. This dissertation focuses broadly on better understanding the underlying mechanisms behind wall-bounded turbulent flows, with an emphasis on exploiting those mechanisms for turbulence flow control.

We developed a numerical simulation to study the effect of slip …

Thermomechanical Modeling In Laser Powder Bed Fusion Additive Manufacturing Using Graph Theory: Application To Prediction Of Recoater Crash, Md Humaun Kobir

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This work pertains to the laser powder bed fusion (LPBF) additive manufacturing process. The objective of this thesis is to predict a frequently occurring type of thermal-induced process failure in LPBF called recoater crash. To ascertain the likelihood of a recoater crash before the part is printed, we develop and apply a computationally efficient thermomechanical modeling approach based on graph theory.

Despite its demonstrated ability to overcome the design and processing constraints of conventional subtractive and formative manufacturing, the production-level scaleup of LPBF is hindered by frequent build failures. For example, the part often deforms as it is being printed …

Development Of A Mash Tl-3 Compliant Parapet Mounted Fence, Luis Rodriguez Alvizo

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

When roadways pass over railway tracks, there is a risk that debris from the roadway or pedestrians may fall onto the tracks and interfere with railway operations. Because of this, state Departments of Transportation (DOTs) commonly install debris fences in conjunction with bridge rails over railway tracks. However, the safety performance of debris fence systems when impacted by an errant vehicle has not been demonstrated through full-scale crash testing. Thus, the objective of this research was to develop a new, parapet-mounted debris fence for the Iowa DOT according to safety performance guidelines included in the American Association of State Highway …

Development Of A Low-Cost, Photovoltaic-Powered, Automated Water Recovery System, David E. Daley

Master's Theses

An existing water filtration system at the Channel Islands Marine & Wildlife Institute (CIMWI) wastes approximately 25 gallons of water per day rinsing out solid waste under light load. To reduce CIMWI’s water and energy consumption, an automated system was designed and built to recover the rinse water and return it to the existing filtration loop. Models for fluid system requirements, basic energy needs, and photo- voltaic energy generation were created to aid in component selection. Basic sensors and electronics were programmed in Python for use with a Raspberry Pi single board computer to collect and process water recovery data …

The Coalescence Of Incipient Soot Clusters, Akaash Sharma, Khaled Mosharraf Mosharraf Mukut, Somesh Roy, Eirini Goudeli

Mechanical Engineering Faculty Research and Publications

Reactive molecular dynamics (MD) simulations are employed to investigate the coalescence of incipient soot clusters. Initially, one thousand acetylene molecules collide and react with each other, allowing bond breakage and new bond formation upon collision, leading to various species (e.g., linear hydrocarbons, branched polyaromatic hydrocarbons) up to the formation of nascent soot clusters with diameter of up to 3.5 nm. The structure and composition of the formed soot clusters are quantified by the packing density and carbon-to-hydrogen (C/H) ratio, respectively, during nucleation and up to the formation of large nascent soot nanoparticles. Then, the nucleated incipient soot clusters are isolated …

Performance Of Calcium Chloride- Ammonia Adsorption Refrigeration System, Michael John

Tanzania Journal of Engineering and Technology (TJET)

An experimental study on the performance of calcium chloride-ammonia adsorption system is described. A single bed water cooled condenser adsorption refrigerator prototype, which utilises calcium chloride-ammonia pair has been developed and tested in the laboratory. Experiments have been conducted for desorption temperatures of 100 °C with desorption time varying from 1 to 4 hours. An electric tape heater and a timer were used to perform the experiments. The adsorption temperature profile, adsorption rate and prototype performance have been analysed and discussed. The tested heating and desorption temperature of 100 °C and heating and desorption time of 1 to 4 hours …

Assessment Of The Impacts Of Climate Variability On Hydropower Generation: A Case Study Of The New Pangani Falls, Tanzania, Dativa Byarufu

Tanzania Journal of Engineering and Technology (TJET)

Climate change poses potential impacts on hydropower generation either positively by increasing or negatively by decreasing river flow. This study assessed the impacts of climate variability on hydropower with a focus on the New Pangani Falls in Tanzania. Rainfall and temperature time series data from 1980-2014 were analyzed in relation to river discharge and associated impacts to hydropower generation. The Man-Kendall test was used to detect trend in both annual and seasonal time series. The results showed a negative trend in annual rainfall with Z= -2.41 at α = 0.05 and the slope Q = -0.964. Seasonal trend analysis showed …

Socio-Technical Perspective For Electronic Tax Information System In Tanzania, Lucas Ngowi, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Socio-technical systems theory has rarely been used by system architects in setting up computing systems. However, the role of socio-technical concepts in computing, which is becoming social in nature, has made the concepts more relevant and commercial. Tax information systems are examples of such systems because they are influenced by external variables such as the political environment, technological trends, and social environment, introducing complexity in their deployment and determining the type of e-services and their delivery to a diverse group of people. It was observed that in Tanzania there is resistance, reluctance and minimal use of electronic tax system because …

Electrochemical Corrosion Properties Of Ternary Al And Quaternary Zr Added Bell Metal In 0.1m Nacl Solution, Sakib Al Razi Khan, Mohammad Ashfaq Hossain, Maglub Al Nur, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

The electrochemical corrosion property of ternary Al and quaternary Zr added Bell metal in 0.1M Sodium Chloride solution has been experimentally conducted at room temperature. Electrochemical impedance spectroscopy (EIS) method and Potentiodynamic polarization technique are used to carry out the electrochemical investigation. Microhardness test is also conducted for all three alloys and it reveals that Al addition increases the hardness of bell metal due to the formation of different intermetallic precipitates of Cu and Al. Optical Micrograph as well as Scanning Electron Micrograph have also been studied to characterize their surface condition. It is found that Zr addition refines the …

Evaluating Storage And Effective Moduli Of In Situ Polymerised And Melt Extruded Pa6 Graphite (G) Composites, Muneer Umar, Michael Ikpi Ofem, Auwal Sani Anwar, Muhammad Murtala Usman

Journal of Mechanical Engineering Science and Technology (JMEST)

Four PA6/graphite (G) composites systems were made. Two using in situ polymerisation equivalent in mixing strain and two systems melt extrusion of equivalent processing strain. The effective modulus of the carbons, room temperature storage modulus and storage modulus at 80 ⁰C were evaluated. The composite/unfilled PA6 ratios at E25 and that at E80 for the in situ polymerised system IG 40/10 are 1.37 and 1.63, respectively. For the in situ polymerised system IG 20/20, the same were 1.96 and 2.28, respectively. For the melt-extruded systems, G 100/6 had the best E25 ratio of 1.67 and E80 of 2.03, whereas the …

The Effect Of Thickness And Type Of Material On The Sheared Edge Characteristics Of Keychain Cranioplasty Plate Blanking Product Using Eccentric Press Machine, Didin Zakariya Lubis, Lea Rachmat Indrasepta, Redyarsa Dharma Bintara, Rizky Ramadhan, Agung Budi Darmawan

Journal of Mechanical Engineering Science and Technology (JMEST)

Keychain cranioplasty plate product has the potential to be produced using the blanking process because it is faster, low-cost, and requires low-energy consumption compared to other mechanical operations. This research aimed to find the effect of material thickness and type on the sheared edge characteristics of keychain cranioplasty plate using the blanking process to meet the international health standard. Experimental research conducted using an eccentric press machine with 40 tons capacity. This research’s test material parameters of titanium (Ti-6AL-4V) and stainless steel (SS-316L) were the 0.5 mm, 0.6 mm, and 0.8 mm thickness with a maximum blanking velocity of 3000 …

Effect Of Dcrp And Dcsp Polarity On The Depth Of Penetration Of Smaw On Low Carbon Steel Astm A36 Using E7018 Electrode, Ma'mun Hidayat, Helleni Febnesia, Sulaeman Deni Ramdani

Journal of Mechanical Engineering Science and Technology (JMEST)

The study aims to determine the level of penetration depth using SMAW (Shielded Metal Arc Welding) Process based on the polarity type of DCRP (Direct Current Reverse Polarity) and DCSP (Direct Current Straight Polarity). This research used ASTM A36 low carbon steel plate with thickness of 6 mm and length of 200 mm, Electrode E7018 LB-52-18 ∅ 3.2 mm, and with current parameters of 90 A, 100 A, 110 A, 120 A and 130 A and 70 ° welding arc angle. The method used the experimental research. Data collection techniques applied direct observation techniques and descriptive statistical data analysis techniques. …

Camshaft Failure Simulation With Static Structural Approach, Riduwan Prasetya, Andoko Andoko, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

A failure happens within the camshaft of the minibus when the vehicle is in utilize. The camshaft was a fracture within the bearing between the primary cylinder exhaust valve and the second cylinder suction. This simulation aims to find the causes of camshaft failure utilizing the finite element method with a static structural approach, including simulations of deformation, strain, stress, fatigue life (stress-life and strainlife), and cracks. The method used in this paper is the finite element method with a static structural approach by ANSYS software. The camshaft material is a gray cast iron designed using Solidworks. Pre-processing includes meshing …

The Effect Of Multi-Extrusion Process Of Polylactic Acid On Tensile Strength And Fracture Morphology Of Filament Product, Muhamad Syaifuddin, Heru Suryanto, Suprayitno Suprayitno

Journal of Mechanical Engineering Science and Technology (JMEST)

Polylactic acid (PLA) is one of the most used materials in FDM 3D Printing. Large-scale consumption of PLA on an industrial scale could cause environmental and efficiency problems. Thus, PLA waste and industry waste need to be recycled to limit excessive waste. This study aimed to investigate the change in mechanical property, morphology, and structure of mechanically recycled PLA. Recycling was performed 12 times using the extrusion process with an extrusion temperature nozzle of 170°C. The SEM, structural analysis, and amorphous-crystalline analysis used XRD. The results showed a gradual decrease of tensile strength from each recycle with a total of …

Fully Coupled Internal Radiative Heat Transfer For The 3d Material Response Of Heat Shield, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The radiative transfer equation (RTE) is strongly coupled to the material response code KATS. A P-1 approximation model of RTE is used to account for radiation heat transfer within the material. First, the verification of the RTE model is performed by comparing the numerical and analytical solutions. Next, the coupling scheme is validated by comparing the temperature profiles of pure conduction and conduction coupled with radiative emission. The validation study is conducted on Marschall et al. cases (radiant heating, arc-jet heating, and space shuttle entry), 3D Block, 2D IsoQ sample, and Stardust Return Capsule. The validation results agree well for …

Interaction Of A Shock Wave With A Particle Curtain, Daniel M. Freelong

Mechanical Engineering ETDs

This thesis presents an experimental study of the interaction of a normal shock wave with a sparse curtain of particles. Soda lime particles with a nominal diameter of 40 micrometers are used to form the curtain. A high speed camera captured several segments of the particle curtain flow from the front view, including the early formation stages. The frames from the video segments were then extracted into individual sequential images. Properties were found using the images such as the velocity fields, time evolution of multiphase Atwood number, and perturbation growth. Volume fractions were derived from mass discharge measurements and particle …

Main Factors That Influence The Thermal Stress State Of Piston Engine Parts, J F. Ismatov, A I. Yangibayev, N V. Vadulina, A A. Jalilov

Technical science and innovation

The development of a holistic, effective, and scalable structure of economic management, as well as the introduction of a program to improve the technical level and efficiency of machinery, are two of the most important concepts for the deep reconstruction of the Republic of Uzbekistan's economic process. Vehicles with diesel engines are gradually being introduced to our country's car fleet. Modern diesel engines are being developed by boosting them: increasing the average effective pressure and speed. Therefore, high reliability and service life, fuel efficiency and environmental performance are the main criteria for their quality. Forcing diesels leads to an increase …

Dynamic Aeroelastic Response Of Stall-Controlled Wind Turbine Rotors In Turbulent Wind Conditions, Sara Jalal, Fernando L. Ponta, Apurva Baruah, Anurag Rajan

Michigan Tech Publications, Part 1

With the current global trend of the wind turbines to be commissioned, the next generation of state-of-the-art turbines will have a generating capacity of 20 MW with rotor diameters of 250 m or larger. This systematic increase in rotor size is prompted by economies-of-scale factors, thereby resulting in a continuously decreasing cost per kWh generated. However, such large rotors have larger masses associated with them and necessitate studies in order to better understand their dynamics. The present work regarding the aeroelastic behavior of stall-controlled rotors involves the study of the frequency content and time evolution of their oscillatory behavior. A …

Experimental Study Of Drying Yacon Tubers, U K. Khujakulov, Sh A. Sultanova, J E. Safarov

Technical science and innovation

This study discusses the method and experimental drying unit for drying yacon tubers at different temperatures. And also the scheme of experimental drying unit is given, which controls temperature, speed of warm air and shows the mass of dried material. The cross-sectional area of the flow in the tunnel is 20×20 cm, the thermal air passed horizontally through a chute with holes and a surface area of 12×12 cm. The exhaust gas did not circulate in this experiment. The accuracy of the temperature control system was 0.1 °C, the weight control system 0.1 g. The variation of moisture ratio depending …

Electric Vehicle Internal Support System, M A. Xudoyberdiyev, L V. Kravchenko, J E. Safarov, B B. Tuychiboyev

Technical science and innovation

At present, it remains relevant to protect the environment around the world, to prevent the deterioration of ecology, to ensure the health of people, to reduce the amount of exhaust gases emitted into the atmosphere in the preservation of the animal world. Currently, in solving these pressing problems, instead of cars with internal combustion engines, which are used in the automotive industry, energy-efficient electric cars that meet the modern demand, produce less exhaust gases to the environment, work without noise, have a high level of manageability, traction and braking dynamics, stability, safety and comfortability. During the use of these electric …

Causes Of Rolling Stock Brake Equipment Failures, O T. Kasimov, Sh I. Mamaev, A V. Grishenko

Technical science and innovation

Reliable operation of the rolling stock and devices of railway transport is the basis for ensuring the throughput and transport capacity of railways, as well as safety.The article is dedicated to the current day of the topical topic: increasing the reliability and analyzing the causes of brake equipment failures in locomotives in the conditions of JSC "Uzbekistan Temir Yollari".On the rolling stock of railways of JSC "Uzbeksiton Temir Yullari" five types of brakes are used: parking (manual), pneumatic, electro-pneumatic, electric (dynamic and reversible), magnetic-rail and are used as additional to EPT.The article presents an analysis of the …

Evaluating Stem Course Re-Design Strategies In Light Of Covid-19, Ulises Juan Trujillo Garcia, Krishna Pakala, Samantha Schauer, Diana Bairaktarova, Bhaskar Chittoori

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The COVID-19 pandemic brought on unprecedented challenges to the teaching and learning communities that required faculty to make purposeful changes in their teaching approaches. Many faculty members had to shift rapidly from in-person to online mode of instruction. This study documents perceptions of STEM faculty who made the change to online teaching. It reports on what strategies faculty used to transition to remote/online teaching and how this change impacted student learning. The study results indicated that almost two-thirds of the faculty changed how they evaluated their students. Results also showed that the sudden change to remote learning negatively impacted student …

Embedded Curriculum With Industry-Recognized Certifications To Improve The Marketability Of Engineering Technology Graduates, Immanuel Edinbarough, Jesus A. Gonzalez-Rodriguez

Manufacturing & Industrial Engineering Faculty Publications

Embedded Curriculum with Industry Recognized Certifications to Improve the Marketability of Engineering Technology Graduates

The Fourth Industrial Revolution is challenging the industries to change the way they manage and operate the manufacturing environment. This leads to the transformation of the world through artificial intelligence, next-generation robotics, automation, big data analytics, 5G technology and Internet of Things. This idea of Industry 4.0 forces the change in the industries of today and tomorrow. In this, cyber physical systems communicate with one another using the Internet of Things. The manufacturing sector takes full advantage of these technologies to produce innovative products to enhance …

Lagrangian And Eulerian Accelerations In Turbulent Stratified Shear Flows, Frank G. Jacobitz, Kai Schneider

School of Engineering: Faculty Scholarship

The Lagrangian and Eulerian acceleration properties of fluid particles in homogeneous turbulence with uniform shear and uniform stable stratification are studied using direct numerical simulations. The Richardson number is varied from Ri=0, corresponding to unstratified shear flow, to Ri=1, corresponding to strongly stratified shear flow. The probability density functions (pdfs) of both Lagrangian and Eulerian accelerations have a stretched-exponential shape and they show a strong and similar influence on the Richardson number. The extreme values of the Eulerian acceleration are stronger than those observed for the Lagrangian acceleration. Geometrical statistics explain that the magnitude of the Eulerian acceleration is larger …

Methods , Systems , And Devices Relating To Surgical End Effectors, Shane M. Farritor, Thomas Frederick, Joe Bartels

Department of Mechanical and Materials Engineering: Faculty Publications

The embodiments disclosed herein relate to various medical device components , including components that can be incorporated into robotic and / or in vivo medical devices, and more specifically including end effectors that can be incorporated into such devices. Certain end effector embodiments include various vessel cautery devices that have rotational movement as well as cautery and cutting functions while maintaining a relatively compact structure. Other end effector embodiments include various end effector devices that have more than one end effector.

Reduced-Order Modeling Of Loosening In Bolted Joints And Dynamic Interactions Between Axially Aligned Threaded Joints, Sandro Aldana

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Maintaining effective preload in bolted joints is critical for ensuring long-term performance and safety throughout the operation of any assembled structure. The loosening of bolted joints has been studied since the Industrial Revolution, but modeling approaches have only emerged over the past three decades. Although existing approaches are capable of simulating or predicting loosening in a single joint consisting of a single bolt, they are too computationally expensive to be used to model loosening in large structures consisting of many bolts. The objective of this thesis is to construct and employ a reduced-order modeling (ROM) approach that treats the internal …

Optimization Of Mechanical Properties At The Infarct Border Zone, Kaushik Sunder

LSU Master's Theses

A myocardial infarction (MI) occurs every 39 seconds in the United States. As of 2016, an estimated 550,000 new and 200,000 recurrent episodes of myocardial infarction (MI) occur each year in the United States was. Infarction is often distinguished by a considerable decrease in wall thickness and an increase in heart size or left ventricular volume. This behavior happens when there is a prolonged lack of blood flow, usually due to damage or clotting, which causes cardiomyocytes to die (CMs). The development of non-contractile infarct scarring is the primary pathophysiology of MI. While the infarct scar prevents myocardial rupture during …

Incorporating A Mid-Semester Project To Evaluate Communication, And Leadership Skills For Undergraduate Engineering Students In The Statics/Strength Of Materials Course: A Comparative Assessment Before And During Covid-19, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this research study, a Popsicle-bridge project was assigned to a cohort of undergraduate engineering students enrolled in a Statics and Strength of Materials Course to enhance technical, communication, and leadership skills when working in a group setting. In most undergraduate engineering courses, the technical content is primarily emphasized for the academic development of the student. However, a practicing engineer must be able to possess and apply communication and leadership skills, which are often excluded from the existing curriculum. The first assessment of this project was completed with a cohort of 85 students in the Fall of 2019 before the …