Mechanical Engineering Commons^™

Signals As Symbols: Applying Normalization Of Deviance To Improve User-Centered Design, Amy Vanschaik

Electronic Theses and Dissertations, 2020-2023

Mistakes can happen in the process of designing and developing interactive digital projects. Sometimes these mistakes negatively impact users' perception and trust of digital interfaces. This research applies the concept of normalization of deviance to identify potential missed opportunities in user-centered design data within the context of a website redesign. By doing this I explore how through observing accidental deviant behaviors or processes we can identify ways to improve the usability and user experience of digital environments. I review the concepts of normalized deviant behavior as addressed by Diane Vaughan in the field of engineering and identify a process for …

Using Smart-Wifi Thermostat Data To Improve Prediction Of Residential Energy Consumption And Estimation Of Savings, Abdulrahman Alanezi, Kevin P. Hallinan, Rodwan Elhashmi

Mechanical and Aerospace Engineering Faculty Publications

Energy savings based upon use of smart WiFi thermostats ranging from 10 to 15% have been documented, as new features such as geofencing have been added. Here, a new benefit of smart WiFi thermostats is identified and investigated; namely, as a tool to improve the estimation accuracy of residential energy consumption and, as a result, estimation of energy savings from energy system upgrades, when only monthly energy consumption is metered. This is made possible from the higher sampling frequency of smart WiFi thermostats. In this study, collected smart WiFi data are combined with outdoor temperature data and known residential geometrical …

Studies On Powder Compaction And Wire Extrusion Of Pure Metals And Metal/Cnt Nano Composites, Qiang Zhou

Electronic Theses and Dissertations, 2020-2023

The goal of this dissertation is to fabricate wires made of Cu/CNT and Al/CNT composites with good mechanical strength and super thermal/electrical conductivities using powder compaction and wire extrusion manufacturing processes. Powder compaction was studied using both test and simulation. Cold compaction, hot compaction and vibration assisted (cold) compaction tests were conducted to achieve different density ratios. Hot compaction tests improved about 6% compared with cold compaction under the same compression pressure. Although the relative density ratio does not obviously improve at vibration assisted (cold) compaction, the strength of the specimens made under vibration loading is much better than those …

An Evaporation Based Micro-Synthetic Jet In Microchannel And Its Applications, Ehsan Sourtiji

Electronic Theses and Dissertations, 2020-2023

An approach to create synthetic jets at micro-scales using periodic bubble growth and collapse was presented and studied over a range of operating frequencies (0.1 to 2.5 Hz) and heating powers (3 to 4.5 Watt). The microfluidic device uses an interfacial layer between vapor and liquid phases which substitutes the requirement for a physical flexible membrane and any other moving parts. The bubble explosion and implosion in the chamber was triggered by periodically powering a micro-heater, which in turn generated the synthetic jet. High-speed camera photography and a microscope were used to capture sequential images of bubble nucleation, growth and …

Identification Of Neuromarkers Using Structural And Functional Neuroimaging, Sreevalsan Sanathanan Menon

Doctoral Dissertations

"One of the grand challenges in science is understanding the human brain. Recent advances in magnetic resonance imaging have opened unmatched opportunities to demystify neural circuitry. In this research, the spatially and temporally complex neuroimaging data were used to identify neuromarkers that aids in quantifying a brain’s health. In the first part, a comparison of static and dynamic functional connectivities was made to study their efficacies in identifying intrinsic individual connectivity patterns. Results show that the intrinsic individual connectivity pattern can be used as a ‘fingerprint’ to distinguish among and identify subjects and their biological sex and is more accurately …

Investigation Of The Sensitivity Of Human Arm To Small Interaction Forces During Physical Human-Robot Interaction (Phri), Fazlur Rashid

Masters Theses

“Understanding the human motor control strategy during physical interaction tasks is crucial for developing future robots for physical human-robot interaction (pHRI). Effective pHRI depends on humans communicating their intentions for movement with robots. In physical human-human interaction (pHHI), small interaction forces are known to convey their intent between the partners. It is speculated that small interaction forces contain significant information to convey the movement intention of pHHI. However, the mechanism underlying this interaction strategy is largely unknown. Hence, the aim of this work was to investigate what affects humans’ sensitivity to the interaction forces. The hypothesis was that small interaction …

Fabrication Of Silicon Nitride Parts By Ceramic On-Demand Extrusion Process, Sachin Choudhary

Masters Theses

“Ceramic On-Demand Extrusion (CODE) is a patented solid freeform fabrication method for manufacturing high-density monolithic ceramic parts. In the past 5-6 years, the technology has been successfully implemented to fabricate alumina and zirconia parts. The mechanical characterizations also show CODE’s high potential in achieving desired structural properties. The present study covers the fabrication of silicon nitride parts by CODE process, which entailed the design of paste formulation for achieving rheology suitable for dimensional control in fabricated parts and determining firing temperature and the content of sintering additives for silicon nitride green bodies fabricated by CODE. The density, hardness, and fracture …

Research And Development Of A Laser Hot Wire Deposition Process, Christopher Croft

Masters Theses

“Laser hot wire directed energy deposition (DED) is an increasingly popular method for improving deposition rates and overall reduction of build times in DED processing. While there is clear benefit, it is important to fully understand the impact of preheating the wire. This work focuses on developing a model that describes bead geometry output using all factors including the wire preheat. The model was fit with over 150 data points that explored a large range of each factor. The resulting model was then leveraged to evaluate a process control variable. The technique chosen used feedback from the hot wire system …

Physics-Based Modeling Of Lithium-Ion Batteries For Control And Estimation Applications, Brody J. C. Riemann

Masters Theses

“Lithium-ion batteries are extensively used in many application areas like consumer electronics, electric vehicles, and microgrids. As the world moves towards further electrification of vehicles and more widespread use of renewable energy sources, the need for large-scale battery storage systems will grow. To effectively replace conventional methods, batteries will need to be charged quickly while accounting for degradation to maximize lifetime. Further, larger batteries require more detailed safety monitoring, which is implemented using a battery management system (BMS). A BMS is responsible for state of charge (SOC) estimation, state of health (SOH) estimation, cell balancing, regulating voltage and current according …

Theoretical Study Of Magnetic Particles In A Shear Flow Subjected To A Uniform Magnetic Field, Christopher A. Sobecki

Doctoral Dissertations

"Magnetic manipulation of non-spherical magnetic microparticles is important for applications in shape-based and magnetic-based separations such as waste management, disease diagnostics, drug delivery, and mining. Manipulations of magnetic microparticles also include chain formation to assemble compositions for electronics, drug loading designs, and magnetorheological fluids for smart armor, hydraulic brakes, and dampers. In microfluidic devices, separation-formation-effectiveness depends on the shape of the channel, the shear rate, and the magnetic field strength and direction.

Particle separation and chain formation involved highly complex and computational expense-demanding studies in microfluidic devices, magnetic fields, and particle- particle/wall interactions. This research took complex experimental studies and …

Transient Maneuvers And Pressure Analysis On An Automotive Torque Converter, Abigail A. Hempy

Dissertations, Master's Theses and Master's Reports

This work involves an investigation of internal fluid behavior of an automotive torque converter in a front-wheel drive automatic 6-speed transmission. The fluid behavior is identified through 29 pressure transducers instrumented throughout the torus, acquired through IR Telemetrics multiplexed channels, and analyzed with custom MATLAB code. The main vehicle operating conditions studied in this research are back drive scenarios or low motoring torques. Findings showed speed and torque limits for open converter coast down conditions as well as pressure field behavior with negative input torque.

Development Of The Carbon Nanotube Thermoacoustic Loudspeaker, Troy Bouman

Dissertations, Master's Theses and Master's Reports

Traditional speakers make sound by attaching a coil to a cone and moving that coil back and forth in a magnetic field (aka moving coil loudspeakers). The physics behind how to generate sound via this velocity boundary condition has largely been unchanged for over a hundred years. Interestingly, around the time moving coil loudspeakers were first investigated the idea of using heat to generate sound was also known. These thermoacoustic speakers heat and cool a thin material at acoustic frequencies to generate the pressure wave (i.e. they use a thermal boundary condition). Unfortunately, when the thermoacoustic principle was initially discovered …

Design And Testing Of An Open Source Vacuum Oven For Research, Community Recycling, And Additive Manufacturing, Benjamin R. Hubbard

Dissertations, Master's Theses and Master's Reports

To aid the continuing growth of open source tools in the research community, this thesis presents two broadly useful instruments which can be built and operated for a fraction of the cost of equivalent or inferior commercial products. The first device is a digitally-replicable scale, which provides a single framework for making measurements on the order of milligrams all the way up to tens of kilograms by supporting multiple types of load cells. The second device is a vacuum oven, which is validated using the first. The open source vacuum oven facilitates the dehydration of materials at low temperature, providing …

Towards Systems On Cloth: The Design, Manufacturing, And Validation Of Open-Source Embroidered Resistors, Somerset Schrock

Dissertations, Master's Theses and Master's Reports

This thesis is focused on advancing embroidered wearable electronics and textile electronics by creating open-source flexible resistors. Advancements in textile electronics could usher a new generation of smart devices that are entirely flexible. Current systems on cloth primarily use rigid components, which limits the flexibility and comfort of using the fabric devices. To advance this field, I propose a novel method of creating flexible electrical resistors with embroidery. To realize this technology, I created an open-source tool to create embroidery files for machine fabrication. This thesis details the methods and tools created for resistor fabrication. The resistors were tested to …

Multiscale Investigation Of Dropwise Condensation On A Smooth Hydrophilic Surface, Shahab Bayani Ahangar

Dissertations, Master's Theses and Master's Reports

The objective of this work is to identify the fundamental mechanism of dropwise condensation on a smooth solid surface by probing the solid-vapor interface during phase-change to evaluate the existence and structure of the thin film and the initial nucleus that develop during condensation. In this work, an automated Surface Plasmon Resonance imaging (SPRi) instrument with the ability to perform imaging in intensity modulation and angular modulation is developed. The SPRi instrument is used to probe (in three dimensions) the adsorbed film that forms on the substrate during dropwise condensation. SPRi with a lateral resolution of ~ 4-10 μm, thickness …

Marangoni Propulsion Of Active Particles, Saeed Jafari Kang

Dissertations, Master's Theses and Master's Reports

We study the surfing motion of active particles located at a flat liquid-gas interface. The particles create and maintain a surface tension gradient by asymmetrically discharging a surface tension-reducing agent. We employ theory and numerical simulation to investigate the Marangoni propulsion of these active surfers. First, we use the reciprocal theorem to establish a relationship between the propulsion speed and the release of the active chemical. This theoretical relation is utilized to examine the effect of wall confinement and geometry on the Marangoni-driven motion of active particle when the inertial effects are negligible and when the transports of the released …

Development Of A Method To Model An Enclosed, Coaxial Carbon Nanotube Speaker With Experimental Validation, Suraj Prabhu

Dissertations, Master's Theses and Master's Reports

Carbon nanotube (CNT) speakers operate on heat as compared to conventional loudspeakers that operate on vibration. CNT speakers are extremely lightweight, stretchable, flexible, and have high operating temperatures. Due to these advantages, CNT speakers are being considered as a viable replacement option for conventional loudspeakers. One such application is automotive exhaust noise control. The goal of this research is to design an enclosed, coaxial CNT speaker and to develop a modeling method to model this speaker using COMSOL Multiphysics.

As part of this research, an enclosed, coaxial CNT speaker was designed and manufactured for automotive exhaust noise control. The first …

Convective Heat Transfer Enhancement Of A Channel-Flow Using Synthetic Jet, Pravesh Pokharel

Electronic Theses and Dissertations

A transient numerical simulation was carried out using ANSYS Fluent, to investigate the convection heat transfer enhancement of the air channel flow using the synthetic jet. Keeping the dimensional parameters of the domain fixed, averaged channel flow velocity was varied up to 3m/s. The diaphragm displacement effect on synthetic jet was studied, ranging the peak-to-peak displacement value from 0.4 to 1.2mm with increment of 0.4mm. Three locations were studied to determine the best operating location of the synthetic jet. Also, frequencies were varied up to 200Hz with every 50Hz increment, from initial condition of 50Hz. It was found that the …

The Development Of A Wearable Device For Relieving The Lower Leg Muscles Fatigue, Warawarin Nitirojntanad

Chulalongkorn University Theses and Dissertations (Chula ETD)

Standing is considered one of the most practical working postures since our limbs have the greatest range of motion. Standing yields plenty of benefits, however, prolonged standing could lead not only to discomfort but also to musculoskeletal disorders (MSDs). This study aims to design and develop a device that could help relieve muscle fatigue in the lower leg as the effects of prolonged standing as well as to evaluate the proposed device. The basics of fatigue, the consequences of prolonged standing and walking, and a review of the existing interventions to cope with muscle fatigue are used in designing the …

Test 2231: John Deere 8r 250, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2084a: John Deere 7r 270, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

A Solution For Overcoming Transradial Prosthetic Control Limitations With Additive Manufacturing And Modeling Techniques, Olivia Layne Santee

Graduate Theses, Dissertations, and Problem Reports (ETD)

Prosthetic limbs have aided in the restoration of both cosmetic and functional capabilities of the human hand; however, structural and control limitations hinder widespread adoption. One example of these limitations addressed in this study is the lack of wrist degrees of freedom (DOF) in robotic hands. Using the mechanical model-driven design, I developed a hand with cable-driven actuation of fingers and direct actuation of the wrist pronation-supination and flexion-extension DOFs. An inverse dynamic simulation determined torque requirements in common tasks manipulating a 1 kg mass with rotational speeds up to 60 deg/s, setting a minimum limitation of 0.76 Nm on …

Development Of Synthetic Coal Char Simulant For Microwave Conversion Studies: A Computationally-Driven Approach, Kevin A. Hager

Graduate Theses, Dissertations, and Problem Reports (ETD)

Recent experimental demonstration of new reaction windows for coal char/methane reactions that are less energy-intensive, provides innovation for modular reactors. However, the correlation of the exact mechanism for the enhancement of these reaction windows is not certain. This study investigates the simplification of these experimental studies by developing a well-characterized coal char simulant. The approach involves using a computational approach to screen macroscopic composition to replicate the dielectric and compositional response of actual char. This study is focused on PRB coal char. A discrete element method (DEM) technique was used to simulate the packing of coal chars to give the …

A Road Grade Based Weighting System For Calculating On-Road Distance-Specific Oxides Of Nitrogen Emissions Of Light-Duty Diesel Vehicles, Jason D. Bolyard

Graduate Theses, Dissertations, and Problem Reports (ETD)

Light-duty diesel vehicles have received significant public and governmental scrutiny recently for violating emissions regulations. Similar to the heavy-duty diesel manufacturers during the late 1990’s, some light-duty manufacturers were implementing different control strategies between laboratory certification tests and customer on-road operation. These devices allowed the vehicle to pass certification tests but then use alternative operation on the road during normal use. The alternative operation would allow for better fuel economy but higher oxides of nitrogen (NOx) emissions. Light-duty vehicles are currently certified in the US using chassis dynamometer testing. The effects of all on-road driving conditions are not mimicked in …

Determination Of Effectiveness Of Energy Management System In Buildings, Vivash Karki

Graduate Theses, Dissertations, and Problem Reports (ETD)

Building Energy Management Systems (BEMS) are computer-based systems that aid in managing, controlling, and monitoring the building technical services and energy consumption by equipment used in the building. The effectiveness of BEMS is dependent upon numerous factors, among which the operational characteristics of the building and the BEMS control parameters also play an essential role. This research develops a user-driven simulation tool where users can input the building parameters and BEMS controls to determine the effectiveness of their BEMS. The simulation tool gives the user the flexibility to understand the potential energy savings by employing specific BEMS control and help …

Evaluation Of Murrell’S Ekf-Based Attitude Estimation Algorithm For Exploiting Multiple Attitude Sensor Configurations, Sharanabasaweshwara Asundi, Norman Fitz-Coy, Haniph Latchman

Mechanical & Aerospace Engineering Faculty Publications

Pico- and nano-satellites, due to their form factor and size, are limited in accommodating multiple or redundant attitude sensors. For such satellites, Murrell's implementation of the extended Kalman filter (EKF) can be exploited to accommodate multiple sensor configurations from a set of non redundant attitude sensors. The paper describes such an implementation involving a sun sensor suite and a magnetometer as attitude sensors. The implementation exploits Murrell's EKF to enable three sensor configurations, which can be operationally commanded, for satellite attitude estimation. Among the three attitude estimation schemes, (i) sun sensor suite and magnetometer, (ii) magnetic field vector and its …

Mechanism For The Unfolding Of The Top7 Protein In Steered Molecular Dynamics Simulations As Revealed By Mutual Information Analysis, Ognjen Perišić, Willy Wriggers

Mechanical & Aerospace Engineering Faculty Publications

We employed mutual information (MI) analysis to detect motions affecting the mechanical resistance of the human-engineered protein Top7. The results are based on the MI analysis of pair contact correlations measured in steered molecular dynamics (SMD) trajectories and their statistical dependence on global unfolding. This study is the first application of the MI analysis to SMD forced unfolding, and we furnish specific SMD recommendations for the utility of parameters and options in the TimeScapes package. The MI analysis provided a global overview of the effect of perturbation on the stability of the protein. We also employed a more conventional trajectory …

Digital Twins For Manufacturing And Logistics Systems: Is Simulation Practice Ready?, Francesco Longo, Antonio Padovano, Letizia Nicoletti, Mohaiad Elbasheer, Rafael Diaz

VMASC Publications

This article provides a theoretical contribution to the state-of-the-art of digital twins for manufacturing and logistics systems. The primary goal of this paper is to draw attention to the gap between the theoretical framework of digital twins in manufacturing and supply chain and their practical implementation from a simulation modeling point of view. Therefore, highlighting the recent innovations in the simulation practice that could provide the basis for digital twins with high levels of data integration, automation, and smart capabilities. This study follows a comparative approach to analyzing theoretical and technical readiness for developing digital twins with high fidelity and …

Effect Of Seawater Ageing On Fracture Toughness Of Stitched Glass Fiber/Epoxy Laminates For Marine Applications, Atizaz Hassan, Rafiullah Khan, Numan Khan, Muhammad Aamir, Danil Y. Pimenov, Khaled Giasin

Research outputs 2014 to 2021

Composite materials are used in various industries such as marine, aircraft, automotive, etc. In marine applications, composites are exposed to seawater, which can affect their mechanical properties due to moisture absorption. This work focuses on the durability of composite materials under the short-term effect of seawater ageing. The specimens were prepared from glass fiber/epoxy using a hand lap-up method and stitched in the z-direction with Kevlar fiber. The specimens were submerged in seawater for 24 and 35 days. A significant decrease in maximum load was found as specimen immersion time in seawater increased. The seawater ageing also affected fracture toughness …

Assessing The Comfort Of Earplugs: Development And Validation Of The French Version Of The Coprod Questionnaire, Jonathan Terroir, Nellie Perrin, Pascal Wild, Olivier Doutres, Franck Sgard, Chantal Gauvin, Alessia Negrini

Études primaires

Earplugs are a common form of protection for workers exposed to hazardous noise levels. Their comfort directly impacts the effective protection by influencing their consistent and correct use. Nevertheless, comfort definition may vary according to the studies. Thus, a previous review of the literature has shown that to improve our understanding of perceived comfort and to reduce measurement variability, it is advisable to consider comfort through a multidimensional construct (physical, acoustical, functional and psychological). On this basis, the COPROD (COnfort des PROtections auDitives/COmfort of hearing PROtection Devices) questionnaire was developed. It is intended for people working in noisy environments. Nine …