Mechanical Engineering Commons^™

A Non-Equilibrium Molecular Dynamics Study Of The Effects Of Helium Bubbles On The Thermal Conductivity Of Zrc, Tate Shorthill

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Zirconium carbide (ZrC) has been proposed as a potential improvement to nuclear fuel cladding. As such, it is important to characterize its physical properties, particularly those relating to thermal energy transport. Reactor conditions are known to damage fuel microstructure over time. While research has been conducted on undamaged and damaged ZrC, some areas of interest remain. Fission products, such as helium, can accumulate in pores within the fuel microstructure. Such a case has yet to be characterized in ZrC fuel cladding.

A non-equilibrium molecular dynamics model was developed to characterize the thermal properties of ZrC. Fourier’s Law allows the thermal …

Untangling The Drivers Of Energy Reduction In The Uk Productive Sectors Efficiency Or Offshoring, Lukas Hardt, Anne Owen, Paul E. Brockway, Matthew K. Heun

University Faculty Publications and Creative Works

The UK has been one of the few countries that has successfully decoupled final energy consumption from economic growth over the past 15 years. This study investigates the drivers of final energy consumption in the UK productive sectors between 1997 and 2013 using a decomposition analysis that incorporates two novel features. Firstly, it investigates to what extent changes in thermodynamic efficiency have contributed to overall changes in sectoral energy intensities. Secondly, it analyses how much of the structural change in the UK economy is driven by the offshoring of energy-intensive production overseas. The results show that energy intensity reductions are …

Material-Process-Property Relationships Of 17-4 Stainless Steel Fabricated By Laser-Powder Bed Fusion Followed By Hot Isostatic Pressing., Harish Irrinki

Electronic Theses and Dissertations

17-4 PH stainless steel is commonly used in medical, tooling, automotive, chemical and aerospace industries due to its excellent strength and corrosion properties. Additive manufacturing processes such as laser-powder bed fusion (L-PBF) have gained attention and importance due to the potential to produce complex-shaped three-dimensional parts for various industries. In order to manufacture three-dimensional components from 17-4 PH stainless steel powder using L-PBF, it is critical for design and manufacturing engineers to have an awareness of various material options and corresponding processing and post-processing conditions to obtain useful mechanical properties from the process. The goal of this dissertation is to …

Microstructure And Mechanical Properties Of Selective Laser Melted Superalloy Inconel 625., Md Ashabul Anam

Electronic Theses and Dissertations

Selective Laser Melting (SLM), a powder based Additive Manufacturing (AM) process, has gained considerable attention in the aerospace, biomedical and automotive industries due to its many potential benefits, such as, capability of fabricating complex three-dimensional components, shortened design to product time, reduction in process steps, component mass reduction and material flexibility. This process uses metallic powder and is capable of fabricating complex structures with excellent microstructure which make SLM not only an improvement over other manufacturing processes but also innovative material processing technology. Inconel 625, a nickel-based super alloy is widely popular in aerospace, chemical and nuclear industries. This alloy …

High Dynamic Range Optical Devices And Applications., Elijah Robert Jensen

Electronic Theses and Dissertations

Much of what we know about fundamental physical law and the universe derives from observations and measurements using optical methods. The passive use of the electromagnetic spectrum can be the best way of studying physical phenomenon in general with minimal disturbance of the system in the process. While for many applications ambient visible light is sufficient, light outside of the visible range may convey more information. The signals of interest are also often a small fraction of the background, and their changes occur on time scales so quickly that they are visually imperceptible. This thesis reports techniques and technologies developed …

Incorporation Of Silica Nanoparticles Into The Underlayer Of Pda/Ptfe Thin Coatings, Adedoyin Abe

Mechanical Engineering Undergraduate Honors Theses

Polytetrafluoroethylene (PTFE) is one of the most low friction and corrosion resistant solid lubricants. Prior studies have shown that a polydopamine (PDA) underlayer enhances the durability of PTFE thin coating. In this study, 100, 200, and 300 µL of aqueous silica nanoparticle (NP) solutions were added to the PDA deposition solution. The durability and coefficient of friction of PDA/PTFE thin coatings on stainless steel substrates are investigated with and without incorporating the silica NPs. The coatings were tested in dry contact conditions using a Universal Mechanical Tester (UMT) with a ball-on-flat configuration in a reciprocating motion. It was found that …

Command Governor-Based Adaptive Control For Dynamical Systems With Matched And Unmatched Uncertainties, Metehan Yayla, Ehsan Arabi, Ali Turker Kutay, Tansel Yucelen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, we propose a command governor-based adaptive control architecture for stabilizing uncertain dynamical systems with not only matched but also unmatched uncertainties and achieving the desired command following performance of a user-defined subset of the accessible states. In our proposed solution, online least-squares solutions for the matched and unmatched parameters are obtained through integration method and they are employed in the adaptive control framework. Specifically, the matched uncertainty is identified and its effect upon the system behavior is entirely attenuated. Moreover, using the unmatched uncertainty approximation obtained through radial basis function neural networks, the command governor signal is …

Modeling And Validations Of Control Parameters For Material Extrusion-Based Additive Manufacturing Of Thixotropic Aluminum Alloys., Lars Herhold

Electronic Theses and Dissertations

Additive Manufacturing (AM) with metals has been accomplished mainly through powder bed fusion processes. Initial experiments and simulations using Material Extrusion Additive Manufacturing (MEAM) have been performed by various researchers especially using low melting alloys. Recently Stratasys Inc. submitted a patent application for the use of their Material Extrusion technology also called Fused Deposition Modeling (FDM) where they describe the process using thixotropic semi-solid alloys. Currently this process using semi-solid, engineering type alloys such as A356 or THIXALLOY 540 aluminum have not been researched to evaluate the control parameters. This research combines the in-depth knowledge of applying thixotropic semi-solid aluminum …

Particle Slip Velocity Influences Inertial Focusing Of Particles In Curved Microchannels, Saurabh Deshpande, Phanindra Tallapragada

Publications

Size based separation and identification of particles in microfluidics through purely hydrodynamic means has gained significant interest due to a number of possible biomedical applications. Curved micro-channels, particularly spiral micro-channels with rectangular cross-section and the dynamics of particles in such channels have been extensively researched to achieve size based separation of particles. In this paper we present evidence that sheds new light on the dynamics of particles in such curved channels; that a unique particle slip velocity is associated with the focusing positions in the cross sections, which leads to a balance of forces. Our experiments therefore imply that the …

Translating Data From The Laboratory Into Simulation: A Computational Framework For Subject-Specific Finite Element Musculoskeletal Simulation, Donald R. Hume

Electronic Theses and Dissertations

Computational modeling is a powerful tool which has been used to inform decisions made by engineers, scientists, and clinicians for decades. Musculoskeletal modeling has emerged as a computational modeling technique used to understand the interaction between the body and its surroundings. There are several common approaches used for musculoskeletal modeling which take advantage of different model formulations to obtain information of interest. Unfortunately, models with different joint formulations inherit disparities in representations of ligament, muscle, and cartilage at joints of interest. These differences affect the way the joint functions and limit the insight it provides through computational analysis. Musculoskeletal models …

Comprehensive Study Of Spray-Painting And 3d Printing Fabrication Methods For Nafion® And Nafion® Equivalents In Ionic Polymer-Metal Composite Actuators And Sensors, Sarah Trabia

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic Polymer-Metal Composites (IPMC) are smart materials that are useful in different applications because of their low voltage requirements and light weight. IPMC are made of ion- conducting polymer (ionomer) plated with a noble metal, such as platinum. When a voltage potential is applied to the surface of the IPMC, it creates an electro-mechanical effect, causing it to actuate. This is due to the motion of the cations towards the negatively charged side of the IPMC, causing it to swell, and in turn, bend. Conversely, deforming an IPMC moves cations within it, which produces a small voltage that can be …

Investigations Into The Airside Cooling Of A Heat Exchanger, David Vallet

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this study we investigate the air-side cooling of a flat-plate fin and tube heat transfer condenser with numerical simulations. A new design is proposed which utilises vortex generators to direct the flow in such a way as to remove some of the stagnant heated air that collects in the wake of the pipes. A comparative study of the proposed design and a standard tube and fin condenser is conducted by varying the air side entrance velocities. The Shear Stress Tension, SST $\kappa - \omega$ 2-equation turbulent model is used to solve the RANS model in ANSYS Fluent 18. The …

The Effect Of Titanium Dioxide On Nucleate Pool Boiling Using An Aluminum Substrate, Kevin Yim

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nucleate pool boiling is a mode of pool boiling that tends to transfer heat more efficiently than the other modes of pool boiling. Many studies have been done to augment the heat transferred during nucleate pool boiling. Various methods of heat transfer augmentation in

boiling can be performed through active treatments (mechanical aids, surface/fluid vibrations, etc.) or passive treatments (functional coating, surface roughening, etc.). This study focuses primarily on a passive treatment, specifically TiO2 coating, which involves testing a substrate coated with TiO2 using NeverWetTM base coating as a coupling agent and coated using a method outlined by Wu et …

Methods And Metrics To Measure And Predict The Social Impact Of Engineered Products, Phillip Douglas Stevenson

Theses and Dissertations

More than ever before, engineers are creating products for developing countries. One of the purposes of these products is to improve the consumer's quality of life. Currently, there is no established method of measuring the social impact of these types of products. As a result, engineers have used their own metrics to assess their product's impact, if at all. Some of the common metrics used include products sold and revenue, which measure the financial success of a product without recognizing the social successes or failures it might have. In this thesis I introduce a potential metric, the Product Impact Metric …

Efficient Incorporation Of Fatigue Damage Constraints In Wind Turbine Blade Optimization, Bryce Taylor Ingersoll

Theses and Dissertations

Improving the wind turbine blade design has a significant effect on the efficiency of the wind turbine. This is a challenging multi-disciplinary optimization problem. During the blade design process, the aerodynamic shapes, sizing of the structural members, and material composition must all be determined and optimized. Some previous blade design methods incorporate the wind turbine's static response with an added safety factor to account for neglected dynamic effects. Others incorporate the dynamic response, but in general is limited to a few design cases. By not fully incorporating the dynamic response of the wind turbine, the final turbine blade design is …

Selecting The Most Effective Energy Modeling Tool Based On A Project Requirement, Sodiq Akande

Electronic Theses and Dissertations

Building energy usage can be derived and controlled by performing building energy modeling. BEM can be performed using numerous software tools such as DesignBuilder, OpenStudio, EnergyPlus etc. These modeling tools can be sorted into three different modeling categories: Black-box, Gray-box and White-box. It is important for a modeler to be able to quickly select the proper tool from the proper category to meet the need of the project. To validate the method of categorizing tools, the three models generated using tools from each category and the modeling outputs required were compared. Each model was designed to estimate the amount of …

Analysis Of Flash In Injection Molding Using Flow Simulation And Design Of Experiments, Claudia Lizette Lopez

Theses and Dissertations

This study presents a method of detecting flash by using flow simulation along with the mold processing conditions and the DOE analysis values from all input and output parameters that will be calculated. All of this would be completed in order to compare and verify the DOE and simulation results and find out if it can be applied to an actual live production molded part, in this case, the Leap char ribbon. This paper will also describe the scrap issue that is presently happening on this molded part, and what are the options that there is in order to find …

Design Of Parallel Robot For Dental Articulation And Its Optimization, Abulimiti Delimulati

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

A dental articulator is a mechanical device used to simulate the relative position and motion between the upper and lower jaw when constructing and testing dental prostheses. Typically, it can be adjusted to approximate patient-specific jaw kinematics in order to analogue the static relationship and specific motions of a patient’s mandible to maxilla. However, the use of dental articulators is essentially a trial-and-error method in order to fine-tune fit and function of a dental prosthesis. Some of the most advanced current dental articulators can reproduce the position and the motion passively; furthermore, dentists need special training for measuring patients’ maxillofacial …

The Effects Of Geometric And Stoichometric Change In Nanoparticles And Materials On Lattice Thermal Conductivity, W. Tanner Yorgason

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Thermal transport properties are critical for applications ranging from thermal management to energy conversion. Passive thermal management has been an area of study for over a century and has only grown as technology has advanced because it requires no additional energy to remove heat. Changing the nanostructure of the materials involved in passive heat transfer methods, either by geometric changes or stoichiometric changes, can greatly improve the effectiveness of this heat transfer method. In order to explore this further, this work employs LAMMPS molecular dynamics (MD) simulation software to calculate the lattice thermal conductivity (λ_p) of a …

Ultraviolet Diffraction Assisted Image Correlation (Uv-Daic) For Single-Camera 3d Strain Measurement At Extreme Temperatures, Ethan K. Nickerson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Digital Image Correlation (DIC) is a technique which uses images taken before and after deformation to determine displacement and strain data over the surface of the sample. In order to obtain this data for both in-plane as well as out-of-plane direction, multiple views of the sample are required. Typically, this is accomplished using multiple cameras, but it is possible to use diffraction gratings to bend the light coming from the specimen in order to allow a single camera to capture multiple views. This technique is referred to as Diffraction Assisted Image Correlation (DAIC) and has been previously demonstrated at room …

Uncertainty Quantification And Sensitivity Analysis Of Multiphysics Environments For Application In Pressurized Water Reactor Design, Cole David Blakely

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The most common design among U.S. nuclear power plants is the pressurized water reactor (PWR). The three primary design disciplines of these plants are system analysis (which includes thermal hydraulics), neutronics, and fuel performance. The nuclear industry has developed a variety of codes over the course of forty years, each with an emphasis within a specific discipline. Perhaps the greatest difficulty in mathematically modeling a nuclear reactor, is choosing which specific phenomena need to be modeled, and to what detail.

A multiphysics computational environment provides a means of advancing simulations of nuclear plants. Put simply, users are able to combine …

Electrochemical Glucose Sensors Enhanced By Methyl Viologen And Vertically Aligned Carbon Nanotube Channels, Benjamin J. Brownlee, Meisam Bahari, John H. Harb, Jonathan C. Claussen, Brian D. Iverson

Faculty Publications

Free-standing, vertically aligned carbon nanotubes (VACNTs) were patterned into 16 μm diameter microchannel arrays for flow-through electrochemical glucose sensing. Non-enzymatic sensing of glucose was achieved by the chemical reaction of glucose with methyl viologen (MV) at an elevated temperature and pH (0.1 M NaOH), followed by the electrochemical reaction of reduced-MV with the VACNT surface. The MV sensor required no functionalization (including no metal) and was able to produce on average 3.4 electrons per glucose molecule. The current density of the MV sensor was linear with both flow rate and glucose concentration. Challenges with interference chemicals were mitigated by operating …

Experimental And Theoretical Investigation Of Mechanical Response Of Laser-Sintered Diamond Lattice Structures, Clayton Neff, Neil Hopkinson, Nathan B. Crane

Faculty Publications

Typically additive manufacturing (AM) processes are limited to a single material per part while many products benefit from the integration of multiple materials with varied properties. To achieve the benefits of multiple materials, the geometric freedom of AM could be used to build internal structures that emulate a range of different material properties such as stiffness, Poisson’s ratio, and elastic limit using only one build material. This paper examines the range of properties that can be simulated using diamond lattice structures manufactured from Nylon 12 with a commercial laser sintering process. Diamond lattices were fabricated with a unit cell length …

Impact Of Extended Sintering Times On Mechanical Properties In Pa-12 Parts Produced By Powderbed Fusion Processes, Garrett Craft, Justin Nussbaum, Nathan B. Crane, J. P. Harmon

Faculty Publications

Additive Manufacturing provides many advantages in reduced lead times and increased geometric freedom compared to traditional manufacturing methods, but material properties are often reduced. This paper considers powder bed fusion of polyamide 12 (PA12, Nylon 12) produced by three different processes: laser sintering (LS), multijet fusion (MJF)/high speed sintering (HSS), and large area projection sintering (LAPS). While all utilize similar PA12 materials, they are found to differ significantly in mechanical properties especially in elongation to break. The slower heating methods (MJF/HSS and LAPS) produce large elongation at break with the LAPS process showing 10x elongation and MJF/HSS exhibiting 2.5x the …

Total Hemispherical Apparent Radiative Properties Of The Infinite V-Groove With Diffuse Reflection, Rydge B. Mulford, Nathan S. Collins, Michael S. Farnsworth, Matthew R. Jones, Brian D. Iverson

Faculty Publications

DYNAMIC control of radiative surface properties enables optimization of thermal management systems for spacecraft, radiative cooling systems, and other applications [1–3]. Various methods of altering the absorption or emission from a surface have been investigated [4–6]. Use of origami-inspired tessellated surfaces to control apparent radiative surface properties is a promising technology [7–9]. Realizing the full potential of tessellated surfaces to dynamically control apparent radiative surface properties requires convenient methods of calculating apparent properties as a function of tessellation geometry and intrinsic radiative surface properties. This Note focuses on the use of geometry to affect total, hemispherical properties of V grooves …

Electrochemical Glucose Sensors Enhanced By Methyl Viologen And Vertically Aligned Carbon Nanotube Channels, Benjamin J. Brownlee, Meisam Bahari, John N. Harb, Jonathan C. Claussen, Brian D. Iverson

Faculty Publications

Freestanding, vertically aligned carbon nanotubes (VACNTs) were patterned into 16 μm diameter microchannel arrays for flow-through electrochemical glucose sensing. Non-enzymatic sensing of glucose was achieved by the chemical reaction of glucose with methyl viologen (MV) at an elevated temperature and pH (0.1 M NaOH), followed by the electrochemical reaction of reduced-MV with the VACNT surface. The MV sensor required no functionalization (including no metal) and was able to produce on average 3.4 electrons per glucose molecule. The current density of the MV sensor was linear with both flow rate and glucose concentration. Challenges with interference chemicals were mitigated by operating …

The Development And Validation Of Sinatra: A Three-Dimensional Direct Simulation Monte Carlo (Dsmc) Code Written In Object-Oriented C++ And Performed On Cartesian Grids, David Matthew Galvez

Master's Theses

The field of Computational Fluid Dynamics (CFD) primarily involves the approximation of the Navier-Stokes equations. However, these equations are only valid when the flow is considered continuous such that molecular interactions are abundant and predictable. The Knudsen number, $Kn$, which is defined as the ratio of the flow's mean free path, $\lambda$, to some characteristic length, $L$, quantifies the continuity of any flow, and when this parameter is large enough, alternative methods must be employed to simulate gases. The Direct Simulation Monte Carlo (DSMC) method is one which simulates rarefied gas flows by directly simulating the particles that compose the …

Modeling Of The Veterinary Anesthetic Circuit, Corinne Viloria Duplantis

LSU Master's Theses

Anesthesia is used to sedate both humans and animals for surgery. In veterinary practice, breathing systems are often used to supply anesthetic gas to the patient. Occasionally, a large amount of pressure can build up in the breathing circuit. This high pressure, if unnoticed, can lead to fatal injury to the lungs of the veterinary patient. The maximum allowable pressure in the anesthetic circuit for small animals is 25 cmH₂O or 2450 Pa. As such, it is necessary to monitor oxygen flow rate (ranging from 0.1-4 LPM), pressure, oxygen rate, anesthetic composition, among other variables during an operation. …

The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin

Journal of Mechanical Engineering Science and Technology (JMEST)

Electric arc welding with covered electrodes is ideally suited for flat plates. If this technique is employed for welding rigid bodies, the results would be of poor quality. One viable solution to weld rigid bodies is through friction welding. The study aimed to investigate the tensile strength of specimens subjected to friction welding with variations in rotational speed, friction time, and pressure and to examine the microstructure of friction welding joints. This research used the one-shot case study design and involved descriptive analysis. The descriptive analysis described the results of tensile testing and microstructure of welding joints. Results showed that …

Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia one of the tropical countries in the world can not be separated from environment problems like other developing countries. One of the causes of declining environment quality is the decline of forests in Indonesia. In 2009, Indonesia’s forest area was by more than half, to about 88 million hectares. By the year 2013 the number is about 82 million hectares. One of the efforts to promote environment education is to familiarize planting plants to children from an early age from the school environment to the family environment. Therefore it is necessary an alternative in the form of planting media …