Mechanical Engineering Commons^™

Flow Distribution And Heat Transfer Coefficients Inside Gas Holes Discharging, Amirhossein Eshtiaghi

LSU Master's Theses

Fluid flow and heat transfer coefficient associated with flow inside short holes (L/D=1) discharging orthogonally into a crossflow was investigated experimentally and numerically for (Re) ̅ ranging from 0.5×105 to 2×105, and blowing ratio ranging from 1.3 to 3.2. The basic configuration studied consists of a feed tube with five orthogonally located gas holes. Four different hole configurations were studied. The transient heat transfer study employs an IR-camera to determine the local heat transfer coefficient inside each hole. Velocity measurements and numerical flow simulation were used to better understand the measured heat transfer distribution inside the hole. The Nusselt number …

Characterizing Impact Induced Hot-Spot Morphology In Granular Solid Explosive, John Gilbert

LSU Master's Theses

Deformation induced ignition of heterogeneous solid explosives is believed to originate at hot-spots within the material which are local regions of elevated temperature resulting from dissipative mechanisms such as plastic deformation and inter-particle friction. Inert meso-scale modeling of these materials can principally account for hot-spot formation enabling the characterization of hot-spot size and temperature distributions which are important for ignition but are di_x000E_cult to experimentally resolve. The focus of this study is to characterize hot-spot morphology, as well as the distribution of hot-spots, behind quasi-steady compaction waves computed from predicted temperature fields resulting from numerical simulations of rigid planar piston …

Towards The Development Of Biotin Carboxylase Driven Robotic Nanoswimmers, Rachel Yates

LSU Master's Theses

The objective of this research is to take the first step towards demonstrating the use of the enzyme biotin carboxylase (BC) as a biomolecular motor. BC is a homodimeric protein involved in fatty biosynthesis in all organisms. The conjecture is that BC can convert chemical energy into useful mechanical work via its conformation change, which acts as a fin or flexible oar producing nonreciprocal motion. To this end, we fabricate a proof-of-concept biomolecular machine driven by BC molecules, viz., a robotic nanoswimmer. This machine consists of a Janus-type nanosize silica particle, where one hemisphere is coated with an intermediate layer …

Programming And Healing Temperature Effects On The Efficiency Of Confined Self-Healing Polymers, Yves Quentin Yougoubare

LSU Master's Theses

Shape memory polymers are smart materials capable of fixing a temporary shape and returning to their initial shape in response to an external stimulus. Since the discovery and acknowledgment of their importance in 1960s, shape memory polymers have been the subject of tremendous and continuous attention. In a previous study conducted on a biomimetic shape memory polymer (SMP), the ability of a self-healing composite to heal, and to repair and restore structural-length scale damage using a close-then-heal (CTH) self-healing mechanism was examined and validated. The present study is purposed with investigation of the effects on healing efficiencies of the variation …

Optimal Actuation In Active Vibration Control Using Pole-Placement, Carla Ann Guzzardo

LSU Doctoral Dissertations

The purpose of this study was to find and demonstrate a method of optimal actuation in a mechanical system to control its vibration response. The overall aim is to develop an active vibration control method with a minimum control effort, allowing the smallest actuators and lowest control input. Mechanical systems were approximated by discrete masses connected with springs and dampers. Both numerical and analytical methods were used to determine the optimum force selection vector, or input vector, to accomplish the pole placement, finding the optimal location of actuators and their relative gain so that the control effort is minimized. The …

Implementation Of A Phenomenological Evaporation Model Into A Porous Network Simulation For Water Management In Low Temperature Fuel Cells, David L. Fritz Iii.

Dissertations, Master's Theses and Master's Reports - Open

A phenomenological transition film evaporation model was introduced to a pore network model with the consideration of pore radius, contact angle, non-isothermal interface temperature, microscale fluid flows and heat and mass transfers. This was achieved by modeling the transition film region of the menisci in each pore throughout the porous transport layer of a half-cell polymer electrolyte membrane (PEM) fuel cell. The model presented in this research is compared with the standard diffusive fuel cell modeling approach to evaporation and shown to surpass the conventional modeling approach in terms of predicting the evaporation rates in porous media.

The current diffusive …

Algorithms For Spacecraft Formation Flying Navigation Based On Wireless Positioning System Measurements, Shu Ting Goh

Dissertations, Master's Theses and Master's Reports - Open

Spacecraft formation flying navigation continues to receive a great deal of interest. The research presented in this dissertation focuses on developing methods for estimating spacecraft absolute and relative positions, assuming measurements of only relative positions using wireless sensors. The implementation of the extended Kalman filter to the spacecraft formation navigation problem results in high estimation errors and instabilities in state estimation at times. This is due tp the high nonlinearities in the system dynamic model. Several approaches are attempted in this dissertation aiming at increasing the estimation stability and improving the estimation accuracy.

A differential geometric filter is implemented for …

A New Control System For Left Ventricular Assist Devices Based On Patient-Specific Physiological Demand, George Faragallah, Yu Wan, Eduardo Divo, Marwan Simaan

Mechanical Engineering - Daytona Beach

A left ventricular assist device (LVAD) is a mechanical pump that helps patients with a heart failure (HF) condition. This pump works in parallel to the ailing heart and provides a continuous flow from the weak left ventricle to the ascending aorta. The current supplied to the pump motor controls the flow of blood. A new feedback control system is developed to automatically adjust the pump motor current to provide the blood flow required by the level of activity of the patient. The systemic vascular resistance (RS) is the only undeterministic variable parameter in a patient-specific model and also a …

The Key Ideas Of Mdw Viii: A Summary, Aaron Altman, Clive L. Dym, Ray Hurwitz, John W. Wesner

Mechanical and Aerospace Engineering Faculty Publications

This paper summarizes and highlights the presentations and discussions that took place during Mudd Design Workshop VIII, ‘Design Education: Innovation and Entrepreneurship,’ at Harvey Mudd College. This paper also describes both the key ideas that emerged from the presentations and discussions of the participating engineering design educators, practitioners and researchers, and the methodology used to capture and retain those ideas. Additionally, this paper proposes a framework of design competencies that were created and evolved by the workshop’s participants as a response to a question posed at one of the workshop sessions: ‘What are the minimum design competencies students should learn …

Asme Early Career Technical Journal (Front Matter), Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. i-xiv

Section 1: Bio-Medical/Bioengineering, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 1-44

Section 2: Materials, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 45-94

Section 3: Dynamic Systems & Control, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 95-136

Section 5: Numerical Methods, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 195-218

Study Of Tuberculosis Spread In Clinical Settings In Resource-Constrained Countries Using Computational Fluid Dynamics (Cfd), Adeel Khalid

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 1: Bio-Medical/Bioengineering; pp. 3-10

Section 4: Energy Generation & Conversion, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 137-194

Significance Of Mwcnt And Tio2 Nanofillers On Low-Density Polyethylene Thermal & Mechanical Properties: Applicability For Pipes Used In Water & Energy Systems, Trenicka Rolle, Ramana Pidaparti

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 1: Bio-Medical/Bioengineering; pp. 18-23

Development Of A Rehabilitative Exoskeletal Arm, Daniel A. Garcia, Victor Soto, Yojans Lurbe, Melissa Morris, Sabri Tosunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 1: Bio-Medical/Bioengineering; pp. 11-17

A Review Of Rehabilitation Strategies For Stroke Recovery, Daniel A. Garcia, Rodrigo Arrendondo, Melissa Morris, Sabri Tosunoglu

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 1: Bio-Medical/Bioengineering; pp. 24-31

Section 6: Fluids Engineering, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 219-250

The Effect Of Stent Design On Hemodynamic Flow In Patient-Specific Diseased Carotid Bifurcation Arteries, Rodward L. Hewlin Jr, John P. Kizito

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 1: Bio-Medical/Bioengineering; pp. 32-39

Modeling Ventilation And Perfusion Mismatch During Acute Lung Injury, Le Yang, Ramana Pidaparti, Huan Mo

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 1: Bio-Medical/Bioengineering; pp. 40-44

Thermal Annealing Improves The Performance Of Cadmium Zinc Telluride (Czt) Semiconductor Material Used For Nuclear Radiation Detectors, Aaron L. Adams, Marcus D. Ashford, Aschalew Kassu, Mebougnal L. Drabo, Wing Chan, Stephen Egarievwe, Asja Radja, Ge Yang, Ralph B. James

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 47-51

Formation Of Η And Ε Phases Of Intermetallic In Snag/Cu-Substrate Soldering System Under Structurally Constrained Condition, Ousama M. Abdelhadi, Leila Ladani

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 52-56

Micro-Mechanics Based Multi-Scale Simulation Of Heterogeneous Cementitious Materials Asme 2012 Early Career Technical Journal - Vol. 11 Xi, M M. Shahzamanian, T Tadepalli, A M. Rajendran

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 57-62

Molecular Dynamics Modeling And Simulations For Mechanical Property Prediction Of Cementitious Material Constituents Under Varying Pressure Conditions, Ahmad Mohamed, Ramana Mohan

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 63-70

Mechanical And Vacuum Properties Of Irradiated Polymers For Use In An Accelerator Diagnostic Device, Marie L. Ivanco, L-A Dillon-Townes

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 71-77

Enhancing Ebsd Imaging Of Multilayer Specimens Through Optimum Specimen Preparation: Application To Lead-Free Solder Joints, Ousama M. Abdelhadi, Leila Ladani

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 78-83

Peridynamic Analysis Of Crack-Inclusion Interaction In Unidirectional Fiber-Reinforced Composites, Sayna Ebrahimi, Anh-Vu Phan

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 84-89

Simulation Of Pitting Cavity Growth Using Cellular Automata, Israr Bm Ibrahim, Ramana Pidaparti

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 2: Materials; pp. 90-94