Mechanical Engineering Commons^™

Sheathless Size-Based Acoustic Particle Separation, Rasim Guldiken, Myeong Chan Jo, Nathan D. Gallant, Utkan Demirci, Jiang Zhe

Mechanical Engineering Faculty Research

Particle separation is of great interest in many biological and biomedical applications. Flow-based methods have been used to sort particles and cells. However, the main challenge with flow based particle separation systems is the need for a sheath flow for successful operation. Existence of the sheath liquid dilutes the analyte, necessitates precise flow control between sample and sheath flow, requires a complicated design to create sheath flow and separation efficiency depends on the sheath liquid composition. In this paper, we present a microfluidic platform for sheathless particle separation using standing surface acoustic waves. In this platform, particles are first lined …

Gpu-Accelerated Large-Eddy Simulation Of Turbulent Channel Flows, Rey Deleon, Inanc Senocak

Mechanical and Biomedical Engineering Faculty Publications and Presentations

High performance computing clusters that are augmented with cost and power efficient graphics processing unit (GPU) provide new opportunities to broaden the use of large-eddy simulation technique to study high Reynolds number turbulent flows in fluids engineering applications. In this paper, we extend our earlier work on multi-GPU acceleration of an incompressible Navier-Stokes solver to include a large-eddy simulation (LES) capability. In particular, we implement the Lagrangian dynamic subgrid scale model and compare our results against existing direct numerical simulation (DNS) data of a turbulent channel flow at Re_τ = 180. Overall, our LES results match fairly well with …

Biomechanical Implications Of Lumbar Spinal Ligament Transectiona Finite Element Study, Gregory Allen Von Forell

Theses and Dissertations

The purpose of this work was to determine the possible effects of isolated spinal ligament transection on the biomechanics of the lumbar spine. A finite element model of a lumbar spine was developed and validated against experimental data. The model was tested in the primary modes of spinal motion in the intact condition, followed by comparative analysis of isolated removal of each spinal ligament. Results showed that stress increased in the remaining ligaments once a ligament was removed, potentially leading to ligament damage. Results also showed changes in bone remodeling "stimulus" which could lead to changes in bone density. Isolated …

Evolutionary Optimization Of Electronic Circuitry Cooling Using Nanofluid, Manu Mital

Mechanical and Nuclear Engineering Publications

Liquid cooling electronics using microchannels integrated in the chips is an attractive alternative to bulky aluminum heat sinks. Cooling can be further enhanced using nanofluids. The goals of this study are to evaluate heat transfer in a nanofluid heat sink with developing laminar flow forced convection, taking into account the pumping power penalty. The proposed model uses semi-empirical correlations to calculate effective nanofluid thermophysical properties, which are then incorporated into heat transfer and friction factor correlations in literature for single-phase flows. The model predicts the thermal resistance and pumping power as a function of four design variables that include the …

Optimizing Fiber Cross-Sectional Shape For Improving Stability Of Air–Water Interface Over Superhydrophobic Fibrous Coatings, B. Emami, Hooman Vahedi Tafreshi

Mechanical and Nuclear Engineering Publications

In this letter, a mathematical force-balance formulation is developed that can be used to predict the critical pressure, the hydrostaticpressure above which the surface starts to depart from the non-wetting state, for superhydrophobicsurfaces comprised of highly aligned fibers (e.g., biased AC-electrospun coatings) with arbitrary cross-sectional shapes. We have also developed a methodology for optimizing the fiber cross-sections to maximize the critical pressure of the surface, using the Euler–Lagrange equation. A case study is presented to better demonstrate the application of our method.

Treatment Of Osteoporosis In A Mouse Model Of Duchenne Muscular Dystrophy Using Black Bear Parathyroid Hormone, Sarah K. Gray

Dissertations, Master's Theses and Master's Reports - Open

Duchenne muscular dystrophy (DMD) is a progressive disease affecting skeletal and cardiac muscle, as well as bone. Long term disuse and glucocorticoid treatments cause progressive osteoporosis in DMD patients, leading to an increase in fracture incidence. Treatments for osteoporosis in these patients have not been widely explored. Parathyroid hormone (PTH), an anabolic treatment for post-menopausal osteoporosis, could benefit DMD patients by improving skeletal properties and reducing fracture risk. Other PTH analogues are not currently FDA approved to treat osteoporosis, but may have improved osteogenic effects compared to the human analogue. Black bear PTH is especially promising as an osteoporosis treatment …

Vortex Shedding Dynamics In Long Aspect-Ratio Aerodynamics Bodies, Liu Chen

Dissertations, Master's Theses and Master's Reports - Open

The focus of the current dissertation is to study qualitatively the underlying physics of vortex-shedding and wake dynamics in long aspect-ratio aerodynamics in incompressible viscous flow through the use of the KLE method. We carried out a long series of numerical experiments in the cases of flow around the cylinder at low Reynolds numbers. The study of flow at low Reynolds numbers provides an insight in the fluid physics and also plays a critical role when applying to stalled turbine rotors. Many of the conclusions about the qualitative nature of the physical mechanisms characterizing vortex formation, shedding and further interaction …

Analysis Of The Penney-Ante Game Using Difference Equations: Development Of An Optimal And A Mixed-Strategies Protocol, Carl Barratt, Pauline Schwartz

Chemistry and Chemical Engineering Faculty Publications

Penney-Ante is a well known two-player (Player I and Player II) game based on an information paradox. We present a new approach, using difference-equations, to analyzing the outcome for each player. One strategy yields a winning outcome of 75% for Player II, the player playing second. The approach also permits investigation of non-optimal strategies, and demonstrates how mixing of such strategies can be used to tune the winning edge of either player. We generalize the analysis to accommodate the possibility of a biased coin.

Effect Of Fiber Orientation On Shape And Stability Of Air-Water Interface On Submerged Superhydrophobic Electrospun Thin Coatings, B. Emami, H. Vahedi Tafreshi, M. Gad-El-Hak, G. C. Tepper

Mechanical and Nuclear Engineering Publications

To better understand the role of fiber orientation on the stability of superhydrophobicelectrospun coatings under hydrostaticpressures, an integro-differential equation is developed from the balance of forces across the air–water interface between the fibers. This equation is solved numerically for a series of superhydrophobicelectrospun coatings comprised of random and orthogonal fiber orientations to obtain the exact 3D shape of the air–water interface as a function of hydrostaticpressure. More important, this information is used to predict the pressure at which the coatings start to transition from the Cassie state to the Wenzel state, i.e., the so-called critical transition pressure. Our results indicate …

Cfd And Heat Transfer Models Of Baking Bread In A Tunnel Oven, Raymond Matthew Adamic

ETD Archive

The importance of efficiency in food processing cannot be overemphasized. It is important for an organization to remain consumer- and business-oriented in an increasingly competitive global market. This means producing goods that are popular, of high quality and low cost for the consumer. This research involves studying existing methods of baking bread in a common type of industrial oven - the single level bread baking tunnel oven. Simulations of the oven operating conditions and the conditions of the food moving through the oven are performed and analyzed using COMSOL, an engineering modeling, design and simulation software. The simulation results are …

Model-Based Approach To Account For Rhe Variation Of Primary Voc Emissions Over Time In The Identification Of Indoor Voc Sources, Kwanghoon Han, Jensen S. Zhang, Pawel Wargocki, Henrik N. Knudsen, Pramod K. Varshney, Bing Guo

Mechanical and Aerospace Engineering - All Scholarship

The study objectives were to improve the understanding of the long-term variation of VOC emission chromatograms of building materials and to develop a method to account for this variation in the identification of individual sources of VOC emissions. This is of importance for the application of the source identification method since materials age over time in real indoor environments. The method is based on the mixed air sample measurements containing pollutants from multiple aged materials and the emission signatures of individual new materials determined by PTR-MS. Three emission decay source models were employed and evaluated for their ability to track …

Non-Isothermal Cool Flames In Unstirred Static Reactors: A Compressible Model With Global Kinetics, Michael R. Foster, Howard Pearlman

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

A compressible model is developed with kinetics based on the Wang–Mou five-step global kinetic scheme and used to evaluate the temperature, concentration, and velocity fields characteristic of low temperature combustion in unstirred static reactors. This work relaxes the assumption of small exothermicity that enabled prior studies to employ the Boussinesq approximation, valid for cases where BT << 1, i.e., slow reactions and cool flames. In this study, the range of validity of the model is extended to cases with large temperature excursions, including multi-stage ignition. For the weakly exothermic cases considered, including modes of slow reaction and cool flames, the Boussinesq approximation is completely adequate. However, it overpredicts the density change and underpredicts the ignition delay time for high-temperature ignitions. Qualitative comparison with experimental results acquired at microgravity conditions are also discussed.

Encyclopedia Of Mathematics And Society: 'Engineering Design', Kimberly Edginton Bigelow

Mechanical and Aerospace Engineering Faculty Publications

Engineers design everything from automobiles and bridges to prosthetic limbs and sporting equipment. Designing is different from simply building in that it requires the adherence to a very systematic, yet iterative, process known as the “engineering design process.” This process is to engineers what the scientific method is to scientists-guiding steps that help ensure that the end result is the best it can be. When a new product is created without following the steps of the engineering design process, there is a higher likelihood that the product designed will lack some important aspect: the end product may not appropriately account …

Learning From Failure In Systems Engineering: A Panel Discussion, Nathan Slegers, Ronald T. Kadish, Gary E. Payton, John Thomas, Michael D. Griffin, Dan Dumbacher

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper summarizes the discussion of the Learning from Failure in Systems Engineering panel that was held in Huntsville, AL on November 8, 2010. The panel objective was to discuss how systems engineers respond to and learn from failure and identify future directions important to the community. The panel consisted of four representatives with experience in government, industry, and academia: (1) Ronald Kadish from Booz Allen Hamilton and former director of the Missile Defense Agency, (2) Gary Payton, retired Deputy Under Secretary of the Air Force for Space Programs, (3) John Thomas from Booz Allen Hamilton and President-elect of INCOSE, …

Predicting Shape And Stability Of Air–Water Interface On Superhydrophobic Surfaces Comprised Of Pores With Arbitrary Shapes And Depths, B. Emami, Dr. Hooman Vahedi Tafreshi, M. Gad-El-Hak, Gary C. Tepper

Mechanical and Nuclear Engineering Publications

An integro-differential equation for the three dimensional shape of air–water interface on superhydrophobicsurfaces comprised of pores with arbitrary shapes and depths is developed and used to predict the static critical pressure under which such surfaces depart from the non-wetting state. Our equation balances the capillary forces with the pressure of the air entrapped in the pores and that of the water over the interface. Stability of shallow and deep circular, elliptical, and polygonal pores is compared with one another and a general conclusion is drawn for designing pore shapes for superhydrophobicsurfaces with maximum stability.

Nebraska Summary: S861 New Holland T6 175, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Feature-Based Neuro-Symbolic Networks For Global Diagnostics, Tracy Lynn Schantz

Electronic Theses and Dissertations

Engineered system diagnostics have been researched over the years with many successful results. From transportation systems to office technologies, many have been equipped with self-diagnostic capabilities and are called Smart Machines. In spite of these advances, current diagnostic systems are driven by direct sensory information without much concern for patterns of the system behavior or features associated with them. For large-scale systems with complex dynamics, global as well as local diagnostics become of great importance, where sensory information is used as input for the local diagnostics, and patterns of behavior or features are utilized for global diagnostics.

The main objective …

Micro Channel Cooler Performance Improvement By Insonation, Peter Webb Higgins

Electronic Theses and Dissertations

The motivation for this work is the need to remove waste heat from laser diodes and high speed transistors in processes which are exponentially increasing past 1 kW/cm2 as anticipated by Moore's Law. The hypothesis guiding the work is that ultrasonic insonation of micro coolers employed to dissipate these heat loads can improve heat removal. It is thought that the mechanism promoting the benefit is enhancement of the ability of the coolant to remove latent heat in two-phase operation by managing entrained bubble size near the cooler's exit so as to forestall flow reduction or blockage caused by large bubbles, …

Design And Analysis Of A Low-Profile Two-Axis Solar Tracker With Hybridized Control, Laughlin Barker, Criselle Olaes, Joseph Valdez, Darcy Marumoto

Mechanical Engineering Senior Theses

The adoption of solar power technologies throughout the world is increasing rapidly. Solar trackers are a necessary component in Concentrated Solar Power (CSP) applications and have also shown up to 46% per annum energy increase in photovoltaic (PV) panels when compared with fixed mounted panels. To resist wind forces, trackers typically incorporate heavy structural components and reinforced concrete foundations. Thus, the manufacture and installation of trackers is costly due to their size, weight, and careful consideration of geological conditions. This work presents a new solar tracker design for use with concentrating solar power and photovoltaic panels. The tracker is comprised …

Regional Comparisons Of Nano-Mechanical Properties Of The Human Meniscus; Structure And Function, John Thomas Moyer

Dissertations, Master's Theses and Master's Reports - Open

Osteoarthritis (OA) is a debilitating disease that is becoming more prevalent in today’s society. OA affects approximately 28 million adults in the United States alone and when present in the knee joint, usually leads to a total knee replacement. Numerous studies have been conducted to determine possible methods to halt the initiation of OA, but the structural integrity of the menisci has been shown have a direct effect on the progression of OA. Menisci are two C-shaped structures that are attached to the tibial plateau and aid in facilitating proper load transmission within the knee. The meniscal cross-section is wedge-like …

Study Of The Effect Of Biodiesel Fuel On Passive Oxidation In A Catalyzed Particulate Filter, Kenneth L. Shiel

Dissertations, Master's Theses and Master's Reports - Open

A 2007 Cummins ISL 8.9L direct-injection common rail diesel engine rated at 272 kW (365 hp) and 317 kW (425 hp) was used to load the filter to 2.2 g/L and passively oxidize particulate matter (PM) within an aftertreatment system consisting of a diesel oxidation catalyst (DOC) and catalyzed particulate filter (CPF). The tests conducted with the engine rated at 365 hp used a 2007 DOC and CPF. The tests conducted with the engine rated at 425 hp used a 2010 DOC and 2007 CPF. Understanding the passive NO₂ oxidation kinetics of PM within the CPF allows for reducing …

Large Eddy Simulation Of Dispersed Multiphase Flow, Yejun Gong

Dissertations, Master's Theses and Master's Reports - Open

This thesis covers two main topics. The first is the comparison between the Reynoldsaveraged Navier-Stokes (RANS) simulation and the Large Eddy Simulation (LES) of high injection pressure diesel sprays under non-evaporating or evaporating conditions. The second topic is the comparison of the fuel behavior in the spray process between the hydrotreated vegetable oil (HVO) and the conventional EN 590, diesel #2 and n-heptane fuels.

To validate the RANS and LES spray simulations, comparisons were made with experimental data. The LES turbulence model, the initial drop size distribution (IDSD), the Levich jet breakup model and the CAB drop breakup model are …

Controlling Nanoparticles Formation In Molten Metallic Bilayers By Pulsed-Laser Interference Heating, Mikhail Khenner, Sagar Yadavali, Ramki Kalyanaraman

Mathematics Faculty Publications

The impacts of the two-beam interference heating on the number of core-shell and embedded nanoparticles and on nanostructure coarsening are studied numerically based on the non-linear dynamical model for dewetting of the pulsed-laser irradiated, thin (< 20 nm) metallic bilayers. The model incorporates thermocapillary forces and disjoining pressures, and assumes dewetting from the optically transparent substrate atop of the reflective support layer, which results in the complicated dependence of light reflectivity and absorption on the thicknesses of the layers. Stabilizing thermocapillary effect is due to the local thickness-dependent, steady- state temperature profile in the liquid, which is derived based on the mean substrate temperature estimated from the elaborate thermal model of transient heating and melting/freezing. Linear stability analysis of the model equations set for Ag/Co bilayer predicts the dewetting length scales in the qualitative agreement with experiment.

Nanosatellite Fabrication And Analysis, Sam Harrison, Patrick Scott, Victor Zapien

Mechanical Engineering Senior Theses

The advancements in technologies used in the aerospace industry have allowed universities to experiment with and develop small-scale satellites. Universities are taking advantage of the relatively low development costs of nanosatellite programs to give students experience in the field of spacecraft design. The purpose of Santa Clara University's team, Nanosatellite Fabrication and Analysis, is to create a process to expedite the design, analysis, and fabrication phase of nanosatellite structures for students working on future satellite missions. The objective is to design four baseline nanosatellite structures to accommodate a range of potential missions where the designs are simple enough to be …

Solar Powered Water Purification System, Alina Carlson, Reece Kiriu, Andrew Nosé, Christopher Sugii, Erin Taketa, Alex Tamai

Mechanical Engineering Senior Theses

Santa Clara University's 2011-2012 Solar-Powered Water Purification System team is developing a solution to create a water distillation system, heated by solar troughs and solely powered by photovoltaic (PV) panels that can produce clean, drinkable water. This device would balance cost and efficiency to be marketable to lower-income locations, such as developing countries that suffer from shortages of clean water. In accomplishing this, the team will ensure that the system is sustainable and requires minimal maintenance.

Kinetic Models Of The Prebiotic Replication Of Dsrna Under Thermal Cycling Conditions, Pauline Schwartz, Dante M. Lepore, Carl Barratt

Chemistry and Chemical Engineering Faculty Publications

We present computational models for the replication of double stranded RNA (dsRNA) or related macromolecules under thermal cycling conditions that would reflect prebiotic (i.e. non-enzymatic) environments. Two models of the replication of dsRNA are represented as multi-step chemical systems. The objective of this investigation was to better understand the kinetic features of such chemical systems. It is shown that thermal cycling in a chemical system is advantageous (relative to a fixed temperature) if there are two competing reactions, one favored at high temperature and one favored at low temperature. For the prebiotic replication of dsRNA, a high temperature favors formation …

Network-Based Data Collection For A Project-Based Freshman Class, Samuel Bogan Daniels, Cheryl Q. Li, David Harding

Mechanical and Industrial Engineering Faculty Publications

The hands-on experience for engineering students is often lacking with class sizes increasing and classroom resources under constant pressure. Even with smaller class sizes and studio classrooms there is only so much equipment and technical support to run experiments and allow for student interaction. Network-based data collection and control may alleviate some of these issues and allow for more hands-on experiences, although remote, in the classroom. This paper discusses the interesting problems and not so obvious pitfalls of setting up some simple network-based data acquisition systems for a multidisciplinary freshman level engineering course. The course as currently taught includes some …

Cfd Study On Aerodynamic Effects Of A Rear Wing/Spoiler On A Passenger Vehicle, Mustafa Cakir

Mechanical Engineering Master's Theses

Aerodynamic characteristics of a racing car are of significant interest in reducing car-racing accidents due to wind loading and in reducing the fuel consumption. At the present, modified car racing becomes more popular around the world. Sports cars are most commonly seen with spoilers, such as Ford Mustang, Subaru Impreza, and Chevrolet Corvette. Even though these vehicles typically have a more rigid chassis and a stiffer suspension to aid in high-speed maneuverability, a spoiler can still be beneficial. One of the design goals of a spoiler is to reduce drag and increase fuel efficiency. Many vehicles have a fairly steep …

Nebraska Summary: S901 Massey Ferguson 7620, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Laser Spark Ignition Of Counter-Flow Diffusion Flames: Effects Of Diluents And Diffusive-Thermal Properties, Fidelio Sime Segura

Electronic Theses and Dissertations

A pulsed Nd:YAG laser is used to study laser spark ignition of methane counter-flow diffusion flames with the use of helium and argon as diluents to achieve a wide range of variations in transport properties. The global strain rate and Damkohler number on successful ignition were investigated for the effects of Lewis number and transport properties, which are dependent on the diluent type and dilution level. A high-speed camera is used to record the ignition events and a software is used for pre-ignition flow field and mixing calculations. It is found that the role of effective Lewis number on the …