Mechanical Engineering Commons^™

Performance Comparisons Of Personal And Professional-Grade 3d Printers, Alfonso Fernandez, Ryan Wicker, Francisco R. Medina, David Espalin

COURI Symposium Abstracts, Summer 2012

The recent emergence of personal 3D printers (i.e., systems that cost $5,000 or less) has engaged a new class of users including hobbyists, tinkerers, entrepreneurs, and do-it-yourselfers. Over 20,000 personal 3D printers were sold in 2011, and thus there is a need for users to understand the cost and performance of personal 3D printers as compared to low-cost professional-grade machines (i.e., systems that cost between $5,000 and $20,000). The cost, process time, material usage, and dimensional accuracy was assessed for select personal 3D printers and low-cost professional-grade systems. The study showed that the laminated object manufacturing (LOM) printer generated 80% …

A Comparative Study Of Strength And Stiffness Of Thin-Walled Specimens Fabricated By Fdm And 3d Printing Technologies, Miranda Rodrigo

Theses and Dissertations

Rapid Prototyped part failure constitutes a major issue for both RP providers and customers. When parts fail the reputation of the vendor is heavily deteriorated, customer dissatisfaction increase and replacement of the broken parts is often necessary to avoid the loss of future business. Product design teams often run into situations where Rapid Prototyped parts are not able to withstand shipping and handling and delivered broken or while demonstrating and examining the parts. When done in the face of customers this builds a perception of poor quality and lack of aptitude on the design group as well as the RP …

Sic-Cnt Multifunctional Nanocomposites For High Temperature Structural, Thermoelectric And Sensing Applications, Salvador Sandoval, Luz I. Bugarin, Luz I, Arifur Chowdhury, Luisa A. Cabrera, Mujibur R. Khan

COURI Symposium Abstracts, Summer 2012

The purpose of this project is to study the thermal-electrical and mechanical properties of the Nanojunctions between Single-Wall Carbon Nanotubes (SWCNT) and Silicon Carbide (SiC). The mixture was done by spreading the nanoparticles in a solution of ethanol and SiC, then sintered to a solid sample of 10 mm x 10 mm x 35 mm, which was attached with Alumel (Ni-Al) wire using silver epoxy to form a circuit for recording during fracture testing. The carbon nanotubes used were approximately 60% semiconducting and 40% metallic. The themal-electrical effect changed when SWCNTs (at 2, and 5 wt%) were infused into SiC. …

Nanowire-Graphene Hybrids For Li-Ion Insertion, Philip A. Morton, Mohammad Arif I. Shuvo, Yirong Lin

COURI Symposium Abstracts, Summer 2012

Lithium ion batteries are one of the most popular energy storage devices due to its high energy density. However, their performance is hindered by the limited surface area of the anode. This research focuses on the use of graphene nanowire hybrids and their performance as anode material. These hybrid structures have a greater surface area then graphite, the most common anode material. Greater surface area will enhance lithium ion insertion, and thus improve battery performance. The graphene oxide (GO) will be synthesized using the Hummer’s plus method. The GO will be sonicated and reduced in an argon furnace to form …

Research And Development Of An Extremely Affordable Prosthetic Knee, Victor H. Duenas, Noe Vargas-Hernandez

COURI Symposium Abstracts, Summer 2012

The objective of this research and development work is to apply the design process in a prosthetic knee mechanism. The importance of human knee is founded in the provided mobility, body positioning and support of the body weight. But for amputees, limitations for everyday tasks imply a real challenge. The project scope a cycle involving the social need, the development and the supply of the solution layout. The motivation is to improve life quality through voluntary and independent human movement by providing a low cost knee design.

The design process requires the conceptual, embodiment, detail and evaluation phases to complete …

Research And Development Of An Expert System In Idea Generation Methods To Aid In The Engineering Design Process, Rodrigo Enriquez, Noe Vargas-Hernandez

COURI Symposium Abstracts, Summer 2012

The objective of this research is to develop an Expert System (i.e. software) to aid designers in selecting appropriate idea generation methods for their specific design situation. This expert system would help designers generate creative ideas more frequently, and hence better designs and better products for society. The first step is to understand the creative design process in detail; this involves the engineering design process, cognitive processes, and other related elements. This understanding is represented initially as a conceptual model. Following an Artificial Intelligence (AI) approach, this model is then developed into a Logical model that defines entities, attributes, and …

Order-Disorder Transition Of Aragonite Nanoparticles In Nacre, Zaiwang Huang, Xiaodong Li

Faculty Publications

Understanding nacre’s bottom-up biomineralization mechanism, particularly, how individual aragonite platelets are formed, has long remained elusive due to its crystallographic peculiarity and structural complexity. Here we report that crystallographic order-disorder transition can be triggered within individual aragonite platelets in pristine nacre by means of heat treatment and/or inelastic deformation, offering a unique opportunity to discriminate mysterious aragonite nanoparticles in transmission electron microscopy. Our findings unambiguously uncover why aragonite nanoparticles in pristine nacre have long been inaccessible under TEM observation, which is attributed to the monocrystal-polycrystal duality of the aragonite platelet. The underlying physical mechanism for why an individual aragonite platelet …

Toward A Gpu-Accelerated Immersed Boundary Method For Wind Forecasting Over Complex Terrain, Rey Deleon, Kyle Felzien, Inanc Senocak

Mechanical and Biomedical Engineering Faculty Publications and Presentations

A short-term wind power forecasting capability can be a valuable tool in the renewable energy industry to address load-balancing issues that arise from intermittent wind fields. Although numerical weather prediction models have been used to forecast winds, their applicability to micro-scale atmospheric boundary layer flows and ability to predict wind speeds at turbine hub height with a desired accuracy is not clear. To address this issue, we develop a multi-GPU parallel flow solver to forecast winds over complex terrain at the micro-scale, where computational domain size can range from meters to several kilometers. In the solver, we adopt the immersed …

Analytical Thermal Model Of Friction Stir Welding With Spatially Distributed Heat Source, Gordon Scott Reese

Theses and Dissertations

Friction stir welding (FSW) has been studied extensively for the past two decades. Thermal modeling has been of particular interest, as the quality of the weld is dependent upon the temperature history of the work piece during the process. Since direct temperature measurements of the welded zone are not possible, an analytical model was developed to predict the temperature in this area. This model requires parameters that cannot be easily experimentally determined, so a best fit for these parameters was acquired via regression analysis by comparing the model to experimental data acquired outside of the weld zone. The model was …

Measurement And Analysis Of Gas Composition In A Staged And Unstaged Oxy-Fired Pulverized Coal Reactor With Warm Flue Gas Recycle, Skyler Charles Chamberlain

Theses and Dissertations

Nearly half of the electrical power produced in the United States is generated with coal. Coal power is inexpensive and reliable, but coal combustion releases harmful pollutants including NOx and SOx into the atmosphere if not controlled. CO2, a greenhouse gas, is also released during coal combustion and may contribute to global warming. A promising technology enabling carbon capture is oxy-coal combustion. During oxy-combustion, coal is burned in an atmosphere of O2 and recycled flue gas to eliminate nitrogen which makes up the majority of air-combustion flue gas. Oxy-combustion flue gas is mainly composed of CO2 and H2O. H2O can …

Investigation Of Internal Wave Spectra Due To Observed Interactions, Benjamin Lee Hillyard

Theses and Dissertations

Observational data are analyzed and decomposed to reveal internal ocean waves and their interactions with one another. Particularly, the interaction of small-scale internal waves with a large inertia wave packet is examined. Using the governing internal wave equations, an analysis is made of the energy propagation of a small scale internal wave with a large-scale inertia wave. With that, an assessment is made of the frequency of occurrence of various encounter types. Next, the possibility of energy transfer during an interaction is explored. The relative energy of the small wave before interacting with the large-scale inertia wave is calculated and …

Modeling Of Complex Pentahedron Solar Still Covers To Optimize Distillate, Jeremy D. Lefevre

Theses and Dissertations

This work shows the results of modeling and optimizing pentahedron-shaped covers for application on a passive solar still. While modeling under the assumption of clear weather in Provo, Utah, United States of America, it was found that two main geometries resulted: A single slope still with fully vertical back and sidewalls and a south face tilted at 37.1°, absorbing a total of 8.98 megajoules of direct solar radiation. A half-pyramid shaped cover with vertical backwall, sidewalls tilted in at 60.6°, and a south face tilted in at 41.5°, absorbing 9.34 megajoules of direct solar radiation.With improved covers, solar radiation absorbed …

Three Dimensional Characterization Of Vocal Fold Fluid Structure Interactions, Joseph R. Nielson

Theses and Dissertations

Voice quality is strongly linked to quality of life; those who suffer from voice disorders are adversely affected in their social, family, and professional relationships. An effort has been made to more fully understand the physics behind how the voice is created, specifically the fluid structure interactions that occur during vocal fold vibration. Many techniques have been developed and implemented to study both the motion of the vocal folds and the airflow that creates the motion. Until recently these techniques have sought to understand a highly three-dimensional phenomenon with 1D or 2D perspectives.This research focuses on the development and implementation …

Investigation Of A Planetary Differential For Use As A Continuously Variable Transmission, Austin B. Randall

Theses and Dissertations

With gas prices on the rise, the demand for high-mileage and low pollution vehicles has taken on an unprecedented role in our society. The production and implementation of electric and hybrid-electric vehicles has recently been a large focus of all major automobile manufacturers. Although these new vehicles have begun to solve much of the expensive fuel consumption and air pollution problems that our economy faces, the initial cost of these vehicles has proven to still be too expensive to capture a significant portion of the market. The further advancement of this technology must not only continue to focus on better …

Metodología Para La Aplicación De Un Plan De Mantenimiento Centrado En La Confiabilidad Con Criterios De Administración De Energía En Equipos De Aire Acondicionado Tipo Compacto, A. Zambrano, J. Zambrano, Nelson Fumo

Mechanical Engineering Faculty Publications and Presentations

A través del tiempo han evolucionado filosofías con procedimientos muy diferentes con intereses que pueden llegar a ser comunes en cuanto a su objetivo terminal, es así como se presenta la administración de energía y el mantenimiento centrado en la confiabilidad. Estas teorías buscan en común el adecuado funcionamiento de los sistemas, lograr un uso sostenible con el ambiente a través de un estudio detallado de la causas y efectos de los problemas y averías presentadas. La propuesta presentada constituye un punto intermedio entre ambas filosofías donde se indica la afectación que puede presentar el mal funcionamiento de un equipo …

Side-By-Side Testing Of Water Heating Systems: Results From The 2010-2011 Evaluation, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

REVISED MARCH 2013 The Building America (BAPIRC) team at FSEC has released a report containing results from a second testing rotation (Phase II) on seven hot water systems evaluated side-by side. Results show the seasonal performance variation and compares solar systems against electric resistance and the Heat Pump Water Heater (HPWH). Standard and tankless natural gas were also evaluated, where the latter demonstrated a 24% natural gas reduction. The lowest averaged electric power consumptions were demonstrated by the HPWH (2.75 kWh/day) and the PV-pumped solar water heater (3.03 kWh/day). Other testing performed on the HPWH under conditioned and restricted air …

Merrill-Cazier Library Gas Exhibition, Betty Rozum, Andrew Wesolek, Pamela N. Martin

Education and Outreach

This exhibition, presented in the Merrill-Cazier Library, captured the history and accomplishments of the GAS program. Click the download button to see a PowerPoint presentation featuring images and text from the exhibition.

Model Of A Mechanical Clock Escapement, John Wagner, David Moline, Eugene Vold

Publications

The mechanical tower clock originated in Europe during the 14th century to sound hourly bells and later display hands on a dial. An important innovation was the escapement mechanism, which converts stored energy into oscillatory motion for fixed time intervals through the pendulum swing. Previous work has modeled the escapement mechanism in terms of inelastic and elastic collisions. We derive and experimentally verify a theoretical model in terms of impulsive differential equations for the Graham escapement mechanism in a Seth Thomas tower clock. The model offers insight into the clock’s mechanical behavior and the functionality of the deadbeat escapement mechanism.

Propagation Of Ultrasound Through Freshly Excised Human Calvarium, Armando Garcia Noguera

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The propagation of ultrasound through complex biological media, such as the human calvarium, poses a great challenge for modern medicine. Several ultrasonic techniques commonly used for treatment and diagnosis in most of the human body are still difficult to apply to the human brain, in part, because of the properties of the skull. Moreover, an understanding of the biomechanics of transcranial ultrasound may provide needed insight into the problem of blast wave induced traumatic brain injury (TBI). In the present study, the spatial variability of ultrasonic properties was evaluated for relevant frequencies of 0.5, 1, and 2.25 MHz. A total …

Weightlifting Performance Is Related To Kinematic And Kinetic Patterns Of The Hip And Knee Joints, Kristof Kipp, Josh Redden, Michelle B. Sabick, Chad Harris

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The purpose of this study was to investigate correlations between biomechanical outcome measures and weightlifting performance. Joint kinematics and kinetics of the hip, knee, and ankle were calculated while ten subjects performed a clean at 85% of 1-RM. Kinematic and kinetic time-series patterns were extracted with principal components analysis. Discrete scores for each time-series pattern were calculated and used to determine how each pattern was related to body-mass normalized 1-RM. Two hip kinematic and two knee kinetic patterns were significantly correlated with relative 1-RM. The kinematic patterns captured hip and trunk motions during the first pull and hip joint motion …

The Influence Of Non-Equilibrium Pressure On Rotating Flows, Irfan Rashid Zardadkhan

Mechanical & Aerospace Engineering Theses & Dissertations

This study was undertaken to investigate the influence of pressure relaxation on steady, incompressible flows with strong streamline curvature. In the early part of this dissertation research, the significance of non-equilibrium pressure forces in controlling the structure of a steady, two dimensional axial vortex was demonstrated. In order to extend the study of pressure relaxation influences on more complex rotating flows, this dissertation has examined other rotating flow features that can be associated with hurricanes, tornadoes and dust devils. To model these flows, modified boundary layer equations were developed for a fluid column rotating near a solid plane including the …

Numerical Analysis And Design Optimization Of Organic Bulk Hetero-Junction Solar Cells Using The Mixed Finite Element And Arc-Length Methods, James L. Dean

Mechanical & Aerospace Engineering Theses & Dissertations

Due to the high coupling and non-linear nature of the semiconductor equations, numerical stability becomes a major problem when using a purely Newtonian numerical method in solving these equations. Presented is a robust mixed finite element formulation with application for organic solar cell devices that incorporates the arc-length predictor-corrector method to bypass such stability issues. The simulated device represents a multilayered solar cell using organic bulk hetero-junction materials including donor materials Poly[2,1,3-benzothiadiazole-4,7-diyl[4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4- b']dithiophene-2,6-diyl]] (PCPDTBT) and poly 3-hexylthiophene (P3HT) with acceptor fullerene materials [6,6]-phenyl C61 butyric acid methyl ester (PC61BM) or [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) as the photoactive …

On Establishing Elastic–Plastic Properties Of A Sphere By Indentation Testing, J. K. Phadikar, T. A. Bogetti, Anette M. Karlsson

Mechanical Engineering Faculty Publications

Instrumented indentation is a popular technique for determining mechanical properties of materials. Currently, the evaluation techniques of instrumented indentation are mostly limited to a flat substrate being indented by various shaped indenters (e.g., conical or spherical). This work investigates the possibility of extending instrumented indentation to non-flat surfaces. To this end, conical indentation of a sphere is investigated where two methodologies for establishing mechanical properties are explored. In the first approach, a semi-analytical approach is employed to determine the elastic modulus of the sphere utilizing the elastic unloading response (the “unloading slope”). In the second method, reverse analysis based on …

Kinematic And Kinetic Synergies Of The Lower Extremities During The Pull In Olympic Weightlifting, Kristof Kipp, Josh Redden, Michelle Sabick, Chad Harris

Mechanical and Biomedical Engineering Faculty Publications and Presentations

The purpose of this study was to identify multijoint lower extremity kinematic and kinetic synergies in weightlifting and compare these synergies between joints and across different external loads. Subjects completed sets of the clean exercise at loads equal to 65, 75, and 85% of their estimated 1-RM. Functional data analysis was used to extract principal component functions (PCF's) for hip, knee, and ankle joint angles and moments of force during the pull phase of the clean at all loads. The PCF scores were then compared between joints and across loads to determine how much of each PCF was present at …

Ergonomic Design Of An Aerial Bucket For Ingress And Egress, Bianca M. Bain

Master's Theses (2009 -)

Electric utility companies across the US have been using aerial bucket trucks for line work and troubleshooting for decades. The use of these trucks eliminates the need for workers to climb utility poles in order to repair or maintain lines. Poor ingress and egress design can lead to acute injuries (slips and falls) as well as cumulative injury (musculoskeletal disorders (MSDs)). Utility companies want to know the best combination of steps and handlebars for aerial bucket ingress and egress that would minimize the risk of injury. American National Standards Institute (ANSI) standard – ANSI/SIA A92.2-2009, sets design requirements for aerial …

Modeling, Identification, Validation And Control Of A Hybrid Maglev Ball System, Ahmed Elhussein E. Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, the electrodynamics of a single axis hybrid electromagnetic suspension Maglev system was modeled and validated by applying it to a single axis hybrid maglev ball experiment. By exploring its linearized model, it was shown that the single axis hybrid Maglev ball has inherently unstable dynamics. Three control scenarios were explored based on the linearized model; (1) Proportional, Deferential (PD) control, (2) Proportional, Deferential, Integral (PID) and (3) PID controller with pre-filtering. This thesis has shown that a PID controller with a pre-filtering technique can stabilize such a system and provide a well-controlled response.

A parametric system identification …

Evaluation Of Autonomous Robotic Milling Methodology For Natural Tooth-Shaped Implants Based On Sko Optimization, Yongki Yoon

Mechanical & Aerospace Engineering Theses & Dissertations

Robotic surgery is one of the most demanding and challenging applications in the field of automatic control. One of the conventional surgeries, the dental implantation, is the standard methodology to place the artificial tooth root composed of titanium material into the upper or lower jawbone. During the dental implant surgery, mechanical removal of the bone material is the most critical procedure because it may affect the patient's safety including damage to the mandibular canal nerve and/or piercing the maxillary sinus. With this problem, even though short term survival rates are greater than 95%, long term success rate of the surgery …

Dynamic Model Of Sailors Descending A Navy Ship Ladder, Jonathan Coulter

Mechanical & Aerospace Engineering Theses & Dissertations

Knee moments are greater in individuals who climb Navy ship ladders than in people climbing stairs. Because it is known that people who climb stairs frequently are at greater risk for osteoarthritis and that people in the Navy report higher incidences of knee pain, it was hypothesized that the internal joint reaction forces during the sailor's descent of a ship ladder would be greater than internal joint reaction forces of gait and stair climbing. Dimensions of a commonly used Navy ship ladder were collected and a replica was constructed. The replica was instrumented to collect 3D kinematics and kinetics during …

Analysis Of Bar Deformation Under Sternum Forces During Surgical Correction Of Pectus Excavatum In Children, Rohit N. Nikam

Mechanical & Aerospace Engineering Theses & Dissertations

Pectus excavatum (PE) also known as sunken or funnel chest is the most common chest wall deformity and affects 1 in every 1,000 children. In PE patients, the middle lower portion of the sternum is depressed producing concave appearance of the anterior part of the chest wall. This problem can be corrected with minimally invasive surgery developed by Dr. Donald Nuss in 1986. A specially made steel bar is implanted to lift the sternum to its normal position. This technique has been modified several times to improve safety and effectiveness of the bar placement and removal. One of the significant …

Kinematic Analysis Of Gesture In Aphasia, Haroon Osmanzada

Mechanical & Aerospace Engineering Theses & Dissertations

Individuals who have experienced a left hemispheric stroke often develop aphasia, which results in a loss of effective verbal communication and reliance on gesturing to communicate. In this study we combined these two aspects of aphasic word retrieval difficulties and gesturing with three-dimensional kinematics. The purposes of this study were: 1) to develop a preliminary database of upper extremity movements for two common gestures used in gestural facilitation of naming (GES) training, slicing and hammering, in participants who experienced a left-hemisphere stroke and compare them to age-matched healthy controls, and 2) to perform a case study consisting of a single …