Mechanical Engineering Commons^™

Development Of Virtual Engineering Simulation For Lean Education, Akalpit Kiran Gadre

Masters Theses

"Global competition and customer demands are pressing modern industry operations to become leaner. The race among the global corporations to "go lean" demands engineers with an in-depth understanding of lean philosophies. An overview of current methods for teaching lean shows that they include small scale hands-on projects, presentations, and guest lectures. There is a need to incorporate a more immersive virtual simulation to further inspire students. Many lean simulation games are available in the market; however, they lack simplicity, ability to store the results, and modeling power.

The goal of this research is to develop a virtual simulation platform, enabling …

Risk Assessment For Conceptual Design Of Hydrokinetic Turbines, Praveen Kailkere Srinivas

Masters Theses

"Hydrokinetic energy is a relatively new concept in the field of renewable energy. The rotor of the turbine, immersed in water, uses the velocity from the flowing water to generate power. Thus the hydrokinetic turbines are also known as zero head turbines. These turbines can be installed in rivers, oceans and sea beds. The design of these systems depends on the site conditions, installation and maintenance costs. Since this technology has not been assessed for its potential power producing capabilities, not much research has been done in order to harness this form of renewable energy and to study the impact …

Development Of Virtual Cnc Machine Tools And Web-Based Machining Process Simulation: Mechanistic Cutting Force Models And Determination Of Specific Force Coefficients In Helical End Milling, Vinay Rao Talekar

Masters Theses

"This thesis presents the results of the investigations of mechanistic modeling and simulation of cutting forces in high speed end milling of titanium alloy, Ti-6Al-4V, and the determination of specific cutting and edge force coefficients for carbide bull-nose helical end-mill. A generalized mathematical model representing the outer geometry of an end-mill and the cutter edge geometry is presented. Mechanistic cutting force models have been developed for a general helical end-mill and modeled specifically for a bullnose helical end-mill. A MATLAB code for the mechanistic cutting force models have been developed for the simulation of cutting force components in end milling …

A Comparison Of Bootstrap, Binomial Inference, And Monte Carlo Methods For Demand Distribution Modeling, Swithin Samuel Razu

Masters Theses

"Analysis of customer preferences is one of the most important tasks in new product development. How customers come to appreciate and decide to purchase a new product impacts market share and, therefore, the success of the new product. Unfortunately, when designers select a product concept early in the product development process, the "true" customer preferences and therefore, market share of the new product is unknown. Conjoint analysis is a statistical methodology that has been used to forecast the market share of a product concept from customer preference survey data. Although conjoint analysis has been increasingly incorporated in design research as …

Evaluation Of Skin-Core Adhesion Bond And Low-Velocity Impact Behavior Of Honeycomb Sandwich Structures, Ramanjaneya R. Butukuri

Masters Theses

"Composite sandwich structures offer several advantages over conventional structural materials such as lightweight, high bending and torsional stiffness, superior thermal insulation and excellent acoustic damping. Some of the failure mechanisms in a composite sandwich structure are de-bonding of the composite facesheets from the core structure and damage due to low-velocity impact. In the first part of this work, adhesive fillet formation and adhesive mechanical strength are evaluated as a function of several different sandwich construction design variables. The effect of film adhesive thickness is studied. A process for reticulation of the adhesive is applied and studied. Optimized combinations of core …

Development Of Lower Cost Imaging Systems For Laser Metal Deposition Process, Shyam Barua

Masters Theses

"Laser Metal Deposition (LMD) has been used as an additive manufacturing process in industries such as aerospace and die castings. LMD is especially useful in repair applications involving die repair. However, it is still not used widely in industry due to variations in the quality of parts. There are multiple interactions between various factors which influence the quality of deposit.

There exists a need for defect detection systems to detect any changes in the deposition quality during deposition. On demand detection enables adjustment in process parameters and minimization of rework cost.

Vision systems have been used extensively in the industry …

A Neural Network Based Approach For Path Planning On Costmap, Songjie Chen

Masters Theses

"In this thesis, a path planning method using a three-level hierarchical system model is proposed. In the top level of the hierarchy, the given location points to visit are taken as waypoints. The waypoint navigation process is formulated as a traveling salesman problem (TSP). The Lin-Kernighan algorithm is used to solve the TSP and transfer the solution to the lower level of the hierarchy. In the middle level, the path is represented by a grid-based costmap. A novel modified Grossberg neural network is designed to solve the point-to-point path planning. The bottom level of the hierarchy smoothens the path with …

Innovative Air Breathing Design And Output Control For Portable Proton Exchange Membrane Fuel Cell, Amar Bala Sridhar

Masters Theses

"Proton Exchange Membrane (PEM) Fuel Cell Technology is an energy source that can provide several times more energy per unit volume than current lithium ion batteries that are available in the market today. The barriers that exist that prevent the fuel cell from entering the world of portable applications are mainly system architecture integration. The idea is to have a fully functioning fuel cell with optimum power output using an innovative chimney design. Tests were conducted to quantify the advantage of using a chimney with the fuel cell. Further research was done to shed light on how different chimney designs …

A Methodology Towards Comprehensive Evaluation Of Shape Memory Alloy Actuators For Prosthetic Finger Design, Kevin O'Toole

Doctoral

Presently, DC motors are the actuator of choice within intelligent upper limb prostheses. However, the weight and dimensions associated with suitable DC motors are not always compatible with the geometric restrictions of a prosthetic hand; reducing available degrees of freedom and ultimately rendering the prosthesis uncomfortable for the end-user. As a result, the search is on-going to find a more appropriate actuation solution that is lightweight, noiseless, strong and cheap. Shape memory alloy (SMA) actuators offer the potential to meet these requirements. To date, no viable upper limb prosthesis using SMA actuators has been developed. The primary reasons lie in …

Experimental Results On Gravity Driven Fully Condensing Flows In Vertical Tubes, Their Agreement With Theory, And Their Differences With Shear Driven Flows' Boundary-Condition Sensitivities, Jorge H. Kurita

Dissertations, Master's Theses and Master's Reports - Open

This doctoral thesis presents the experimental results along with a suitable synthesis with computational/theoretical results towards development of a reliable heat transfer correlation for a specific annular condensation flow regime inside a vertical tube. For fully condensing flows of pure vapor (FC-72) inside a vertical cylindrical tube of 6.6 mm diameter and 0.7 m length, the experimental measurements are shown to yield values of average heat transfer co-efficient, and approximate length of full condensation.

The experimental conditions cover: mass flux G over a range of 2.9 kg/m²-s ≤ G ≤ 87.7 kg/m²-s, temperature difference ∆T (saturation …

Nanomechanics Of Cellulose Crystals And Cellulose-Based Polymer Composites, Anahita Pakzad

Dissertations, Master's Theses and Master's Reports - Open

Cellulose-polymer composites have potential applications in aerospace and transportation areas where lightweight materials with high mechanical properties are needed. In addition, these economical and biodegradable composites have been shown to be useful as polymer electrolytes, packaging structures, optoelectronic devices, and medical implants such as wound dressing and bone scaffolds.

In spite of the above mentioned advantages and potential applications, due to the difficulties associated with synthesis and processing techniques, application of cellulose crystals (micro and nano sized) for preparation of new composite systems is limited. Cellulose is hydrophilic and polar as opposed to most of common thermoplastics, which are non-polar. …

Numerical Modeling Of The Failure Mechanisms In Si Thin Film Anode For Li-Ion Batteries, Siddharth H. Patel

Dissertations, Master's Theses and Master's Reports - Open

In recent times, the demand for the storage of electrical energy has grown rapidly for both static applications and the portable electronics enforcing the substantial improvement in battery systems, and Li-ion batteries have been proven to have maximum energy storage density in all rechargeable batteries. However, major breakthroughs are required to consummate the requirement of higher energy density with lower cost to penetrate new markets. Graphite anode having limited capacity has become a bottle neck in the process of developing next generation batteries and can be replaced by higher capacity metals such as Silicon. In the present study we are …

Comparison Of Modal Analysis Results Of Laser Vibrometry And Nearfield Acoustical Holography Measurements Of An Aluminum Plate, Jennifer L. Potter

Dissertations, Master's Theses and Master's Reports - Open

Noise and vibration has long been sought to be reduced in major industries: automotive, aerospace and marine to name a few. Products must be tested and pass certain levels of federally regulated standards before entering the market. Vibration measurements are commonly acquired using accelerometers; however limitations of this method create a need for alternative solutions.

Two methods for non-contact vibration measurements are compared: Laser Vibrometry, which directly measures the surface velocity of the aluminum plate, and Nearfield Acoustic Holography (NAH), which measures sound pressure in the nearfield, and using Green’s Functions, reconstructs the surface velocity at the plate. The surface …

Dynamic Modeling, Simulation And Control Design Of A Parafoil-Payload System For Ship Launched Aerial Delivery System (Slads), Anand S. Puranik

Dissertations, Master's Theses and Master's Reports - Open

The objective of this research was to develop a high-fidelity dynamic model of a parafoilpayload system with respect to its application for the Ship Launched Aerial Delivery System (SLADS). SLADS is a concept in which cargo can be transfered from ship to shore using a parafoil-payload system. It is accomplished in two phases: An initial towing phase when the glider follows the towing vessel in a passive lift mode and an autonomous gliding phase when the system is guided to the desired point. While many previous researchers have analyzed the parafoil-payload system when it is released from another airborne vehicle, …

Dynamic Modeling Of Active Regeneration In Catalyzed And Non-Catalyzed Diesel Particulate Filters, Aamod Pethe

Dissertations, Master's Theses and Master's Reports - Open

Particulate matter (PM) emissions standards set by the US Environmental Protection Agency (EPA) have become increasingly stringent over the years. The EPA regulation for PM in heavy duty diesel engines has been reduced to 0.01 g/bhp-hr for the year 2010. Heavy duty diesel engines make use of an aftertreatment filtration device, the Diesel Particulate Filter (DPF). DPFs are highly efficient in filtering PM (known as soot) and are an integral part of 2010 heavy duty diesel aftertreatment system.

PM is accumulated in the DPF as the exhaust gas flows through it. This PM needs to be removed by oxidation periodically …

Topological Changes In 2d Simplicial Meshes For The Simulation Of Fractures, James R. Thunes

Dissertations, Master's Theses and Master's Reports - Open

A method for the introduction of strong discontinuities into a mesh will be developed. This method, applicable to a number of eXtended Finite Element Methods (XFEM) with intra-element strong discontinuities will be demonstrated with one specific method: the Generalized Cohesive Element (GCE) method. The algorithm utilizes a subgraph mesh representation which may insert the GCE either adaptively during the course of the analysis or a priori. Using this subgraphing algorithm, the insertion time is O(n) to the number of insertions. Numerical examples are presented demonstrating the advantages of the subgraph insertion method.

Effects Of Hibernation On Bone In Yellow-Bellied Marmots, Samantha J. Wojda

Dissertations, Master's Theses and Master's Reports - Open

Disuse osteoporosis is a problem for people with spinal cord injury or stroke, patients confined to bed rest, and astronauts exposed to microgravity. Unlike most mammals however, bears have been shown to prevent bone loss during hibernation, a seasonal period of disuse. Similarly, studies in ground squirrels indicate preservation of whole bone strength during hibernation, though evidence suggests there may be some increased osteocytic osteolysis. Uncovering the mechanism by which these animals prevent bone loss during hibernation could lead to an improved treatment for osteoporosis in humans. Marmots are a good animal model for these studies because they are small …

Development Of An Optimization Model For Biofuel Facility Size And Location And A Simulation Model For Design Of A Biofuel Supply Chain, Fengli Zhang

Dissertations, Master's Theses and Master's Reports - Open

To mitigate greenhouse gas (GHG) emissions and reduce U.S. dependence on imported oil, the United States (U.S.) is pursuing several options to create biofuels from renewable woody biomass (hereafter referred to as “biomass”). Because of the distributed nature of biomass feedstock, the cost and complexity of biomass recovery operations has significant challenges that hinder increased biomass utilization for energy production. To facilitate the exploration of a wide variety of conditions that promise profitable biomass utilization and tapping unused forest residues, it is proposed to develop biofuel supply chain models based on optimization and simulation approaches. The biofuel supply chain is …

Micro Combined Heat And Power Laboratory Development, Thomson Varghese

Dissertations, Master's Theses and Master's Reports - Open

Micro Combined Heat and Power (Micro-CHP) system produces both electricity and heat required for residential or small business applications. Use of Micro-CHP in a residential application not only creates energy and economic savings but also reduces the carbon foot print of the house or small business. Additionally, micro-CHP can subsidize its cost of operation by selling excess electricity produced back to the grid. Even though Micro-CHP remains attractive on paper, high initial cost and optimization issues in residential scale heat and electrical requirement has kept this technology from becoming a success. To understand and overcome all disadvantages posed my Micro-CHP …

Solar Power Generation: Methods And Comparisons, Rambod Rayegan, Yong X. Tao

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 78-86

Bench-Scale, Multifilament Spinning Conditions Effect On The Structure And Properties Of Polyacrylonitrile Precursor Fiber, Elizabeth Ashley Morris

University of Kentucky Master's Theses

Due to its unique characteristics, carbon fiber is one of the leading materials for light weight, high strength and stiffness applications in composite materials. The development of carbon fibers approaching theoretical strengths and stiffness is a continuing process which has led to improved mechanical and physical properties over the recent years. Improvements in carbon fiber properties are directly dependent on the quality of the precursor fiber. Research and development of PAN precursor fiber requires extensive experimentation to determine how processing conditions affect the structure and properties of the precursor fibers. Therefore, it is the goal of this thesis to analyze …

High Speed Continuous Thermal Curing Microfabrication System, Franklin Dibartolomeo

University of Kentucky Master's Theses

Rapid creation of devices with microscale features is a vital step in the commercialization of a wide variety of technologies, such as microfluidics, fuel cells and self-healing materials. The current standard for creating many of these microstructured devices utilizes the inexpensive, flexible material poly-dimethylsiloxane (PDMS) to replicate microstructured molds. This process is inexpensive and fast for small batches of devices, but lacks scalability and the ability to produce large surface-area materials. The novel fabrication process presented in this paper uses a cylindrical mold with microscale surface patterns to cure liquid PDMS prepolymer into continuous microstructured films. Results show that this …

Evaluation Of Mechanical Proerties And Effective Thickness Of The Interfaces By Finite Element Analysis, Sesha Spandana Pulla

University of Kentucky Master's Theses

The nanoindentation technique has been used to identify the interfaces between dissimilar materials and subsequently to evaluate the physical and mechanical properties across the interfaces. The interfaces could represent the interface (transition face) between oxidized and unoxidized polymers, the interface between rigid fiber and polymer matrix, or other similar situations. It is proposed to use a nanoindenter equipped with small spherical tip to indent across the interfaces of dissimilar materials. The proposed method has been validated by conducting a large number of virtual experiments through 3-dimensional finite element simulations, by varying the properties of the two dissimilar materials, including various …

Experimental Flow Visualization For Corrugated Airfoils At Low Reynolds Number Including Development Of A Pitch And Plunge Fixture, Jeremy Ryan Sparks

University of Kentucky Master's Theses

Micro Air Vehicles (MAV’s) have small size and extreme maneuverability which makes them ideal for surveillance. Propulsion mechanisms include propellers, rotors, and flapping airfoils. Flapping motions, along with biologically-inspired wing profiles, are of interest due to their use of natural physics. Corrugated airfoil structures appears to have poor aerodynamic performance at higher Reynolds numbers, but serve well at Re<10,000. Understanding flow structures around corrugated profiles and comparing them to a standard airfoil will aid in understanding how these corrugated profiles perform well and have been adopted by some of nature’s most acrobatic flyers. Motivation for this investigation is to compare static flow visualizations of corrugated profiles to a standard National Advisory Committee for Aeronautics (NACA) airfoil from low to high angles of attack and further observe flow structure development of a pitching and plunging flat plate at a Re<10,000 and a Strouhal number relevant to natural fliers. The static visualization was conducted at Re=1,000 with a NACA 0012 airfoil and two corrugated models. The Pitch and Plunge Fixture (PPF) developed was constructed by simplifying flapping wings as a two degree of freedom motion in plunge (translation) and pitch (rotation). Results obtained from the PPF were compared with a numerical simulation.

An Investigation Of The Reynolds Number Dependence Of The Near-Wall Peak In Canonical Wall Bounded Turbulent Channel Flow, Bahareh Estejab

University of Kentucky Master's Theses

An experimental investigation into fully developed high aspect ratio channels was undertaken. A review of the literature reveals that there is a need for accurate measurement of the inner peak value of streamwise turbulence intensity despite the large number of studies already completed. The scattered data on this subject could be attributed either to insufficient channel size (aspect ratio or length) or to hot-wire spatial filtering.

A new, high quality, channel flow facility was designed and constructed, considering the most recent geometric limitation provided in the literature. To obtain accurate results, data were acquired using hot-wire probes with constant viscous-scale …

Nebraska Summary: S813 New Holland T7.185, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1984: John Deere 6100d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1996a: Case Ih Puma 225, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2012: Case Ih Farmall 55a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Design Of A Smart System For Monitoring Concrete Curing And Structural Health, William Quinn

Theses

Structural Health Monitoring (SHM) is a rapidly growing sector of the construction industry. Automated monitoring methods arc mainly limited to global monitoring and the application of local monitoring methods has not gained widespread application due to the fact that currently technology requires that the systems are wired to data acquisition devices. This thesis presents a fully embeddable wireless sensor node for the local monitoring of structural concrete. It presents the first reported wireless embedded system implementation of the electromechanical impedance method using both resonant and antiresonant sensors for this purpose.

The first section of this thesis examines the feasibility of …