Mechanical Engineering Commons^™

Golf Prosthesis Final Design Report, Joseph Barcus, Lauren Wilson, Ryan Satcher

Mechanical Engineering

A prosthetic attachment designed to allow an upper extremity bilateral amputee to golf.

Golf Club Quality Control Device, David Mcdermott, Mark Severy

Mechanical Engineering

No abstract provided.

Floating Tube Heat Exchangers, Patrick Harris, Christina Gedeon, Leonel Medrano, George Milam

Mechanical Engineering

With the slowly diminishing supply of fossil fuels across the world and the heightened risk of carbon dioxide pollution leading to global warming, a shift towards renewable energy is gaining momentum. Recent advances in wind and solar power technology have increased the power density of alternative sources while decreasing the cost per kilowatt-hour, but the technology has not become advanced enough yet for large scale deployment. Combined Power Cooperative has developed a revolutionary design for a concentrated solar power plant that utilizes Fresnel reflectors and a large body of water in which to install them. In addition to being low-cost, …

The Sources Of Heat Generation In Vibrothermography, Jeremy Renshaw, John Chen, Stephen Holland, R. Bruce Thompson

Mechanical Engineering

Vibrothermography, or sonic IR, is a nondestructive evaluation technique used to find surface and near surface defects—such as cracks and delaminations—through observations of vibration-induced heat generation. This method has significant interest as an industrial inspection method, however, a lack of understanding of the fundamental physics governing the heat generation process has limited its application despite extensive theoretical, numerical simulation, and experimental work. Significant theoretical and numerical simulation work has been performed, but has yet to be rigorously verified experimentally. This paper presents experimental verification of the sources of heat generation in vibrothermography; specifically friction, plasticity, and viscoelasticity. Specific experimental evidence …

Reduced Gravity Landing Research Vehicle Design, Sarah Isert

Undergraduate Honors Capstone Projects

Human and robotic missions beyond low earth orbit (LEO) are key components of NASA's currently emerging strategy for space exploration. These missions will inevitably include humancrewed lunar and planetary surface landings. Trips to near-earth asteroids are also in the incipient planning stages. A permanent presence on the surface of an extra terrestrial body like Mars or the Moon will require many landings by both human-crewed and robotic spacecraft.

Planetary and lunar surface landings are inherently dangerous undertakings, and successful landings are indeed rare events. Since the end of the Apollo era with the completion of the Apollo 17 mission in …

In Vitro Study Of Fluid Diodes In The Pulmonary Valve Position, John Porcher

All Theses

Every year many people suffer from severe chronic pulmonary insufficiency. Problems that can be incurred include the valve becoming stenotic, where it inhibits antegrade flow, and incompetent, allowing retrograde flow. When either of these conditions occurs with great severity, it is often necessary for the native valve to be replaced. There are no acceptable, permanent solutions currently available for a pulmonary valve replacement. Previous research, based on regurgitant fraction and transvalvular gradient, has indicated that a fluid diode could possibly serve as a permanent valve replacement solution. This study investigated the effectiveness of a diode to reduce the workload of …

An Early Warning Monitoring System For Cnc Spindle Bearing Failure, Andrew Werner

All Theses

Equipment employed in a manufacturing environment must be able to operate as long as possible having as little downtime as possible. Therefore, maintenance is crucial in order to allow for the equipment to perform its designated tasks without failure, especially on critical systems. In a CNC machine, if the spindle fails, the machine is useless. Having the ability to detect spindle degradation to the point where a replacement spindle installation can be planned, via condition monitoring, is invaluable to a manufacturer who utilizes these types of machines.
An early warning monitoring system for CNC spindle bearing failure has been developed …

Fabrication And Characterization Of Multi-Functional Non-Spherical Particles Via Mechanical Deformation, Venkata Shilpa Varahagiri

All Theses

Nanoparticles bridge the gap between bulk materials and molecules. They possess exciting but contrasting mechanical, chemical, magnetic and optical properties when compared to their bulk counterparts due to their shape and size. When the size of noble metal nanoparticles is reduced to less than the wavelength of light, the particles intensely absorb and scatter light at wavelengths that depend on the particle size, shape, and local dielectric environment due to Localized Surface Plasmon Resonance (LSPR) modes. Recently, plasmonic particles have been used in a wide variety of sensor and optical device applications including immunoassays and surface enhanced Raman spectroscopy substrates. …

The Evaluation And Analysis Of The Impact Of Variability On The Twelve Workstation Factory, Hernando Garrido

Theses and Dissertations - UTB/UTPA

Presently, there is theory and work examples about factory performance presented in the book ―Optimizing factory Performance‖ by James Ignizio, Ph.D. The theory explains how to determine performance using three fundamental equations by considering the impact and propagation of variability through a 12-Workstation Factory Model, and a number of its variations. The objective of developing a simulation model was to serve as a tool for instructors to illustrate the impact and propagation of variability in the manufacturing industry and to investigate phenomena (i.e., time to reach steady state, impact of variability) in the three dimensions of manufacturing. The validation of …

An Investigation Of The Application Of Phase Change Materials In Practical Thermal Management Systems, David Ewing

All Dissertations

This work investigates the application of alternative cooling techniques to thermal management. In the first section, this work presents models and extensive simulation studies on an alternative cooling strategy based upon phase change materials (PCMs) for the thermal management system of a LED headlight assembly. These studies have shown that properly chosen PCMs, when suspended in metal foam matrices, increased the thermal conductivity of the PCM. The increased thermal conductivity can enhance the cooling characteristics of a practical thermal management system for a LED headlight system. To further enhance the advantages of using PCMs, nanoparticle enhanced fluids (nanofluids) are desirable …

Optimization-Based Power Management Of Hybrid Power Systems With Applications In Advanced Hybrid Electric Vehicles And Wind Farms With Battery Storage, Hoseinali Borhan

All Dissertations

Modern hybrid electric vehicles and many stationary renewable power generation systems combine multiple power generating and energy storage devices to achieve an overall system-level efficiency and flexibility which is higher than their individual components. The power or energy management control, ``brain' of these ``hybrid' systems, determines adaptively and based on the power demand the power split between multiple subsystems and plays a critical role in overall system-level efficiency. This dissertation proposes that a receding horizon optimal control (aka Model Predictive Control) approach can be a natural and systematic framework for formulating this type of power management controls. More importantly the …

A Formal Representation Of Mechanical Functions To Support Physics-Based Computational Reasoning In Early Mechanical Design, Chiradeep Sen

All Dissertations

The lack of computational support to the conceptual phase of mechanical engineering design is well recognized. Function-based modeling and thinking is widely recommended in design texts as useful means for describing design concepts and using them in tasks such as solution search, problem decomposition, and design archival. Graph-based function structure models that describe a product as a network of transformative actions of material, energy, and information, are discussed as a potential tool for this purpose, but in the current state of the art, function structures are not formalized as a computational representation. Consequently, no computer tool exists with which a …

Effect Of Relative Humidity And Temperature Control On In-Cabin Thermal Comfort State, Ali Alahmer

All Dissertations

This dissertation discusses the effect of manipulating the relative humidity RH levels inside vehicular cabins on the thermal comfort and human occupants' thermal sensation. Three different techniques are used to investigate this effect. Firstly, thermodynamic and psychometric analyses are used to incorporate the effect of changing RH along with the dry bulb temperature on the human comfort window. Specifically, the study computes the effect of changing the relative humidity on the amount of heat rejected from the passenger compartment and the effect on occupants comfort zone. A practical system implementation is also discussed in terms of an evaporative cooler design. …

Development Of A Design Method To Reduce Change Propagation Effects, Prabhu Shankar

All Dissertations

ABSTRACT
This dissertation presents a design method to reduce engineering changes caused due to change propagation effect. The method helps designers to systematically plan a verification, validation, and test (VV&T) plan. The rationale behind such a method is founded on a well-accepted principle that a robust validation plan can reduce design changes. However, such method has not yet been developed in mechanical engineering domain, so a method from software engineering has been adopted and extended to address the limitations in the existing design evaluation tools.
Tools extensively used in industry, such as FMEA, and in academia have been reviewed to …

Fabrication Of Grooved Hollow Fiber Membrane For Nerve Regeneration: Process Modeling And Performance Evaluation, Jun Yin

All Dissertations

Nerve injury is a general but intractable disease in traumatic injuries, leading to a significant reduction of functions in the nervous system. Extensive efforts are made on nerve injury rehabilitation. Since the appropriate connections between neurons and their targets are necessary, guiding axonal outgrowth is an essential step for neuron outgrowth in nervous system development, functioning, and regeneration. Besides the direct surgical nerve connection, an artificial means of guiding nerve regeneration called nerve conduits is widely applied in nerve injury rehabilitation. The main function of nerve conduits is to bridge the nerve gap, to help regenerating axons across damaged regions …

Evaluating The Use Of Functional Representations For Ideation In Conceptual Design, Benjamin Caldwell

All Dissertations

Functional representations are often used in the conceptual stages of design because they encourage the designer to focus on the intended use and purpose of a system rather than the physical solution. Function models have been proposed by many researchers as a tool to expand the solution search space and guide concept generation, and many design tools have been created to support function-based design. These tools require designers to create function models of new or existing artifacts, but there is limited published research describing what types of functions should be included in a model or the appropriate level of abstraction …

Concept Tests For A New Wire Flying Vehicle Designed To Achieve High Horizontal Resolution Profiling In Deep Water, Chris Roman, Dave Hebert

Graduate School of Oceanography Faculty Publications

Efficiently profiling the water column to achieve both high vertical and horizontal resolution from a moving vessel in deep water is difficult. Current solutions, such as CTD tow-yos, moving vessel profilers, and undulating tow bodies, are limited by ship speed or water depth. As a consequence, it is difficult to obtain oceanographic sections with sufficient resolution to identify many relevant scales over the deeper sections of the water column. This paper presents a new concept for a profiling vehicle that slides up and down a towed wire in a controlled manner using the lift created by wing foils. The wings …

Modeling And Control Of A Flexible Ionic Polymer Metal Composite(Ipmc) Actuator For Underwater Propulsion, Shivakanth Gutta

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goal of this research is to model and control the underwater vehicle propelled by IPMC actuator. IPMC consists of an ionic membrane sandwiched between two metallic electrodes. When an external voltage is applied, IPMC undergoes large deformation due to transport of ions. Due to its ability to work in aqueous environments, it can be used for developing small scale underwater vehicles.

First, Finite element approach is used to describe the dynamics of the both single and segmented IPMC actuator. In the approach presented, each element is attached with a local coordinate system that undergoes rigid body motion along with …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Fenestration Studies On Building Energy Using The Facade Evaluation Facility, Wendell Cocina

UNLV Theses, Dissertations, Professional Papers, and Capstones

The project was developed to assess several types of facades and their influence on building energy, mainly focused on windows and other building fenestrations. Requirements for the facility are stated in this paper alongside corresponding solutions. The facility is designed to represent a section of a building façade. Experimenting on a wide range of fenestrations including windows with integrated PV elements was the primary prerequisite. The option of removable façade configurations was used and allowed testing specimens to be changed effortlessly. Instrumentation and data acquisition are discussed including calibration and uncertainty analysis. Investigation of the air conditioning unit was concluded …

Feasibility Analysis And Concept Development Of A Crash Cushion Diaphragm Structure For High-Speed Race Tracks, Curt Lee Meyer

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

A new diaphragm and dual guide rail system was designed for use in a crash cushion for high-speed race tracks. These structural components were designed to provide sufficient lateral support to redirect impacting vehicles and compress the energy-absorbing elements of the crash cushion. The primary design criteria stated that the diaphragm/guide rail system should be capable of withstanding a 100-kip lateral impact load. The guide rail was to be configured in order to not require replacement after a design impact event. Initial design and modeling resulted in two candidates for guide rail sections which were evaluated during physical testing. The …

Development Of Spray Cooling For High Heat Flux Electronics, Jeremy Scott Junghans

Graduate Theses and Dissertations

The thermal demands of modern day electronic systems require innovative thermal solutions. Spray cooling has proven to be able to cool heat fluxes orders of magnitude higher than traditional cooling methodologies. This work includes a comparison of spray cooling to standard thermal management methodologies. Key system parameters and considerations are discussed. The properties of available packaging materials and their effect on the reliability of a spray cooled system are presented. Parameters such as fluid temperature, droplet size, fluid velocity and flow rate all directly impact performance and are detailed in this work. Finally, results from of a wide range of …

Asymptotic Multiphysics Modeling Of Composite Beams, Qi Wang

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A series of composite beam models are constructed for efficient high-fidelity beam analysis based on the variational-asymptotic method (VAM). Without invoking any a priori kinematic assumptions, the original three-dimensional, geometrically nonlinear beam problem is rigorously split into a two-dimensional cross-sectional analysis and a one-dimensional global beam analysis, taking advantage of the geometric small parameter that is an inherent property of the structure.

The thermal problem of composite beams is studied first. According to the quasisteady theory of thermoelasticity, two beam models are proposed: one for heat conduction analysis and the other for thermoelastic analysis. For heat conduction analysis, two different …

Axisymmetric Finite Element Modeling Of Adhesive Joint Between A Laminated Composite And Metal Cylinder, Casey A. Talbot

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Because lowering weight as much as possible is desirable in all applications designed to go to space, the use of composite materials is desirable. Composites are materials that are made up of two or more separate materials usually with significantly different characteristics which remain separate and distinct in their completed state. Fiber-reinforced epoxy composites, in general, are very strong and light. Because most space structures cannot solely be made of composites, a method to join them with metals is needed. Adhesive joining, or gluing, has been determined to be the most promising option.

For the joining technique to be used, …

Evaluation Of An Incompressible Energy-Vorticity Turbulence Model For Fully Rough Pipe Flow, Doug F. Hunsaker

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Traditional methods of closing the Boussinesq-based Reynolds-averaged Navier-Stokes equations are considered, and suggestions for improving two-equation turbulence models are made. The traditional smooth-wall boundary conditions are shown to be incorrect, and the correct boundary conditions are provided along with sample solutions to traditional models. The correct boundary condition at a smooth wall for dissipation-based turbulence models is that which forces both the turbulent kinetic energy and its first derivative to zero. Foundations for an energy-vorticity model suggested by Phillips are presented along with the near-smooth-wall behavior of the model. These results show that at a perfectly smooth wall, the turbulent …

Optimization Of A Low Reynold's Number 2-D Inflatable Airfoil Section, Todd A. Johansen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A stand-alone genetic algorithm (GA) and an surrogate-based optimization (SBO) combined with a GA were compared for accuracy and performance. Comparisons took place using the Ackley Function and Rastrigin's Function, two functions with multiple local maxima and minima that could cause problems for more traditional optimization methods, such as a gradient-based method. The GA and SBO with GA were applied to the functions through a fortran interface and it was found that the SBO could use the same number of function evaluations as the GA and achieve at least 5 orders of magnitude greater accuracy through the use of surrogate …

High Temperature Thermodynamic Properties Of Znte(S), Robert F. Brebrick

Mechanical Engineering Faculty Research and Publications

We have gathered the partial pressure, Knudsen cell, and emf measurements on ZnTe(s) from which the Gibbs energy of formation can be calculated. Published partial pressures of diatomic tellurium have been adjusted to take account of a subsequently published third law analysis of tellurium. The equation used to calculate the total pressure from the rate of mass loss from an extensive set of Knudsen cell measurements has been corrected to give a 5% increase in total pressure and the Gibbs energy of formation has been recalculated. A high temperature heat capacity for ZnTe(s) has been selected from the published data. …

Predicting The Acoustic Response Of The Golf Club & Ball Impact Using Finite Elements And The Boundary Element Method, Scott Henry Moreira

Master's Theses

An improved and repeatable method for meshing golf club heads using finite elements in TrueGrid® was developed. Using solid brick elements through the thickness of the club head instead of shell elements better represents the many thickness variations throughout each section of a club head. This method also results in a high quality mesh at the center of the club head sections while still maintaining high quality at the edges. A simulation procedure was also developed to predict the acoustic pressure at a designated point in an acoustic medium of a golf club and ball impact using the BEM and …

Influence Of Supraglottal Geometry And Modeling Choices On The Flow-Induced Vibration Of A Computational Vocal Fold Model, Timothy E. Shurtz

Theses and Dissertations

Computational models of the flow-induced vibrations of the vocal folds are powerful tools that can be used in conjunction with physical experiments to better understand voice production. This thesis research has been performed to contribute to the understanding of vocal fold dynamics as well as several aspects of computational modeling of the vocal folds. In particular, the effects of supraglottal geometry have been analyzed using a computational model of the vocal folds and laryngeal airway. In addition, three important computational modeling parameters (contact line location, Poisson's ratio, and symmetry assumptions) have been systematically varied to determine their influence on model …

Dynamics And Stability Of Two-Potential Flows In The Porous Media, Bojan Markicevic, Branko Bijeljic, Homayun K. Navaz

Mechanical Engineering Publications

The experimental and numerical results of the capillary-force-driven climb of wetting liquid in porous media, which is opposed by the gravity force, are analyzed with respect to the emergence of a multiphase flow front and flow stability of the climbing liquid. Two dynamic characteristics are used: (i) the multiphase flow front thickness as a function of time, and (ii) the capillary number as a function of Bond number, where both numbers are calculated from the harmonic average of pores radii. Throughout the climb, the influence of capillary, gravity, and viscous force variations on the flow behavior is investigated for different …