Mechanical Engineering Commons^™

Dem Simulated Radial And Axial Pressure In A Cylindrical Granular Column, Meng Cui

Theses

The study of packed beds of granular spheres and their applications are of great interest to industries, and one of the most important subjects that has been studied is cylindrical beds. In 1895, H. A. Janssen discovered that in a vertical cylinder the pressure measured at the bottom does not depend upon the height of the filling in contrast to Newtonian fluids that possess linear hydrostatic pressure equilibrium. One of assumptions of his theory stated that the horizontal pressure is proportional to the vertical. In this thesis, this physical hypothesis is investigated using Discrete Element Simulations of inelastic with a …

Ignition Of Metal Powder By Electrostatic Discharge Stimulation, Ervin Beloni

Theses

Energetic formulations with metal fuel additives are extensively used in propellants, explosives, pyrotechnics, and incendiaries. Currently, replacement of regular metal powders with nanocomposite metal-based materials is being considered. Such nanocomposite reactive materials are capable of very high reaction rates while maintaining the high combustion enthalpies characteristic of metals. However, such novel reactive nano-materials are often highly sensitive to impact, friction, and electrostatic discharge, making them difficult to handle. In particular, their high electrostatic discharge sensitivity (ESD) was reported. While ESD testing is very common and standardized, the mechanisms of powder ignition by electric spark remain unclear. This project is aimed …

Design Of Gait Rehabilitation System, Andriy Pletenetskyy

Theses

This thesis describes the conceptual design of an innovative robotic rehabilitation machine whose purpose is to help in the recovery of people with motor function disabilities. The machine is smaller, simpler and cheaper than current solutions on the market yet it delivers same functionality.

The conceptual development of the gait rehabilitation system also features a human model with average anthropometric dimensions that allows better visualization and understanding of the actual machine operation. The human model is kinematically coupled to the machine and the whole assembly presents a complex mechanism that closely simulates gait training session.

Three-dimensional modeling and analysis techniques …

Phase Transfer In A Collision Between A Droplet And Solid Spheres, Zheng Shen

Theses

The hydrodynamics of a liquid droplet impinging on a particle is of direct relevance to many engineering applications. The mechanism of heat and mass transfer during the droplet solid collision is essential to the design and operation of many industrial systems. However, very limited systemic research is available to describe the droplet impact on hot solid spheres.

This paper aims to establish a systematic investigation of phase transfer due to the droplet-solid impact, by both experimental and modeling approaches. The targeted phase transfer includes the surface attachment, mass of vaporization, heat transfer to droplet and its partition between vaporization and …

Fully Dense Aluminum-Rich Aluminum Copper Oxide Powders For Energetic Formulations, Demitrios Stamatis

Theses

The thermite reaction between Al and CuO is well known and highly exothermic. For a conventional thermite mixture comprising mixed metal and oxide powders, this reaction is rate limited by the slow heterogeneous mass transfer at the metal and oxide interface. The relatively low reaction rate and a difficult ignition have restricted practical applications for this reaction. For newly developed, nano-composed thermites, the interface area can be substantially increased resulting in a much higher reaction rate and a new range of possible applications. Nanocomposite Al-CuO materials are produced using a technique referred to as arrested reactive milling. Regular metal and …

Precision Coil Inspection, Karol Murphy

Theses

Boston Scientific produces the Guglielmi Detachable Coil in their Cork based facility. These are used in a surgical procedure to eliminate aneurysms. The first step in the process is to form a coil by wrapping a platinum wire around a mandrel. These coils have outer diameters ranging from 190 pm to 520pm. This is called the primary wind and is inspected to find any defects introduced into the coil from the winding process. These defects may be the result of wire defects in the raw material or possibly poor handling by the operators. These primary winds are processed further to …

Treatment Of Aqueous Waste Streams At Eli Lilly - Alternatives To Incineration, Barry Hennessy

Theses

The aim of this project was to investigate the potential to treat liquid waste (secondary) from production processes at Eli Lilly with the emphasis on minimising the volume of waste sent for thermal oxidation. In addition, the project aimed to investigate if the chosen technology was diverse and potentially capable of handling waste streams from different processes. Membrane technology was identified as one of the most suitable technologies and trials were carried out on secondary waste from three production processes. The literature review and practical thrials aswell as assessment of trial results ran from October 2003 to June 2005.

All …

Numerical Analysis Of The Operation Of A Water Cannon, Teymuraz G. Bitadze

Theses

This study was designed to investigate the operational process of a launcher for generation of high speed water projectiles, and it involved the optimization of the geometry of a launcher body. The objective of the optimization of the internal geometry was to increase the effective momentum of the projectile while the optimization of the external geometry resulted in the reduction of the mass of the launcher.

In the course of the optimization of the internal geometry the exit velocity variation was determined, and used to compute an effective projectile momentum, which actually affects a workpiece. In this research, it was …

Burmester Curve And Numerical Motion Generation Of Grashof Mechanisms With Perimeter And Transmission Angle Optimization In Mathcad, Peter J. Martin

Theses

An infinite number of planar four-bar mechanism solutions exist for a series of prescribed rigid-body positions. Given a set of Burmester curves or numerically-generated fixed and moving pivot curves, sorting through the limitless number of possible mechanism solutions to find one that ensures full link rotatibility, satisfies compactness criteria and produces feasible transmission angles can be a daunting task. In this work, two algorithms are developed and presented by which the user can select optimum planar four-bar motion generators (optimum with respect to Grashof criteria, mechanism perimeter criteria and transmission angle criteria) from a set of all mechanism solutions produced …

Thermo-Mechanical Design Of A 100 Ghz Mmic Power Amplifier Using Flip Chip Technology, Sean Cremin

Theses

This thesis is concerned with the thermo-mechanical design, thermal modelling and temperature profile measurement of a 100 GHz flip chip bump bonded MMIC medium power amplifier.

Flip chip mounting offers superior RF performance in terms of output power, gain, noise figure and bandwidth. The thermal challenge was to dissipate approximately two watts of DC power from the GaAs MMIC (monolithic microwave integrated circuit) through Au (gold) stud bumps which equates to less then 7% of the total surface area of the die. Infrared thermographic images confirmed that the flip chip MMIC amplifier was functional with all eight FET stages on …

Dem Simulated Floor Pressure Induced By A Granular Column, Shawn A. Chester

Theses

At the end of the 19th century, H. A. Janssen discovered that the bottom floor pressure in a cylindrical container of granular material asymptotes exponentially to a value less than the weight of the material i.e., the pressure becomes independent of the fill height of the column. This phenomenon is investigated using discrete element simulations of inelastic, frictional spheres in a cylindrical vessel having a particle-to-cylinder diameter ratio at approximately 13.3 or 26.6, with varying bed heights in both cases. The axial pressure profile and the load experienced by a piston that is supporting the granular column are computed. In …

Dry Magnetic Assisted Impaction Mixing Of Sub-Micron Boron And Barium Chromate For A Time Delay Composition, Ryan Barrow

Theses

The objective of this investigation is to improve the mixture homogeneity of, Boron and Barium Chromate, a delay composition called T-10, using a novel dry mixing technique, , called the Magnetic Assisted Impaction Mixing (MAIM). Two additional mixing methods, ultra-sonic mixing and shaker mixing (dry and wet), were used for comparative analysis, to evaluate the mixing effectiveness of the MAIM which was also compared to two Navy mixed T-l0 samples. Characterization of the homogeneity is described by how well boron is effectively distributed throughout the mixture, which is a challenging task since the mixture's composition is 3% Boron versus 97% …

Doppler Ultrasound Technique Used To Determine The Blood Flow Viscosity In The Middle Cerebral Artery Of A Canine Animal Model, Raj P. Ganpath

Theses

The cerebral blood flow velocity in the middle cerebral artery of an canine animal model was measured using the Doppler Ultrasound technique. A transducer was designed with a 20 MHz piezoelectric crystal and used for the application. An in vitro calibration system was designed and machined for the purpose of testing and calibrating every transducer before using it in vivo. Preliminary tests included experiments on the in vitro system and measurement of blood flow velocity in the human wrist artery (metacarpal artery). The effect of using different transmission media (agarose and gelatin) was determined through the many in vitro and …

System Identification Of A Pasteurisation Process: A Comparison Of Direct And Indirect Methods, Niel Canty

Theses

The primary focus of this research is to identify a linear model for a direct steam injection (DSI) pasteurisation process which is a component of a large-scale pilot evaporation process widely used in the dairy industry. The pasteurisation process has been identified as a key component of the evaporation process. The author believes that no previously published work has focused on identifying models for a DSI pasteurisation process which makes this work an original contribution to the area. The pasteurisation process can be modelled as a single-input, single-output (SISO) process with a measurable disturbance. Thus two transfer functions were required …

A Gait Generation Mechanism For Leg Rehabilitation Therapy, Yazan Ahmad Manna

Theses

While most take their ability to walk for granted, some are unable to walk secondary to any number of pathologies, such as traumatic brain injury (TBI), spinal cord injury (SCI), cerebrovascular accidents (CVA), cerebral palsy (CP), multiple sclerosis (MS), Parkinson's disease, as well as various orthopedic conditions. Decreased activity has been shown to be associated with rapidly deconditioning and other co-morbidities. Rehabilitation techniques that afford patients the ability to begin reconditioning through walking sooner may ultimately enhance their return to a better quality of life.

The overall goal of this study is to design a gait generation mechanism for rehabilitation …

Coupled Thermal Fluid Modelling Of A Low Embedded Energy Solar Thermal Collector, Myrrha Corcoran

Theses

Flat-plate collectors are the most economical and are popular in solar domestic heating water system since they are usually permanently fixed in position, have simple construction, and require little maintenance. The design of a solar energy system is generally concerned with obtaining maximum efficiency at minimum cost. The aim of this thesis was to develop a mathematical model, for a forced convection solar heated water system. The solar collector in this study incorporated a honeycombed extruded polycarbonate structure, for both the cover and water channels.

A very detailed thermal analysis of the flat-plate solar collector was carried out to predict …

Heat Transfer Model For The Ignition Of Metal Powder On A Heated Filament, Trent Stanton Ward

Theses

The thermal processes leading to ignition of metal powders in environments that experience rapid temperature changes are currently poorly understood. In this research, a methodology for studying and quantification of such processes is developed. In the experimental case study, the ignition temperature of Mg powder coated on the surface of an electrically heated filament is detected optically at different heating rates. To interpret the results, a heat transfer model has been developed for a multilayer powder coating on top of an electrically heated filament. The coating is modeled using a hexagonal close packed geometry and the heat transfer equations are …

The Evidence For A Nascent Biotechnology Cluster In Cork, John W. Hobbs

Theses

Over the past 30 years, encouraged by Ireland’s low rate of corporation tax (currently 12.5 %), and active promotion of FDI by the IDA, foreign owned pharmaceutical plants have set up and multiplied in the Cork area. To Ireland’s advantages of a low tax rate, an English speaking population, a pro-business environment and membership of EU, Cork offered the added attractions of a deepwater port and large natural harbour, good freight connections, an international airport, an educated workforce and excellent sporting and leisure facilities for sailing, golf, etc. (Pfizer, Eli Lilly, Novartis, GlaxoSmithKline, Johnson & Johnson and Schering Plough have …

Combustion Of Aerosolized Spherical Aluminum Powders And Flakes In Air, Binu Zacharia Eapen

Theses

Combustion rates and completeness of aerosolized spherical aluminum powders and flakes are compared using constant volume explosion experiments. The comparison of particles and flake sizes was made based on their specific surface areas determined using the Brunauer-Emmett-Teller (BET) method and respective "BET diameters". It is observed that the rates of pressure rise and rates of flame propagation were higher for aluminum powders with BET diameters of about 2 to 5 μm compared to aluminum flakes for which the BET diameters were under 1 μm In agreement with the flame propagation rates, the overall completeness of combustion was also higher for …

Characterization Of Aluminum Powder Ignition, Salil Mohan

Theses

Heating rate effect and particle size effect on ignition temperature of Al powder were studied to collect data for development of a possible Al powder ignition model. Aluminum ignition is associated with a highly accelerated burn rate and high combustion enthalpy. A new ignition model, which can adequately interpret these conditions, is needed to develop better propulsion fuels, explosives and incendiaries that use Al as an additive. This experimental program was focused on preparing framework for characterization of ignition kinetics of Al powder by determining the ignition temperature for different, systematically varied, heating rates and particle size. The experimental setup …

Magneto-Rheological Fluid Orthosis For Suppressing Tremor, Hyoung-Joo Yeo

Theses

Tremor is a common movement disorder that occurs with specific neurological conditions. This condition may seriously impact daily living activities. The aim of the present study is to evaluate the possibility of the development of a wearable technology that is capable of exerting torques at a user's joints for suppressing tremor.

This thesis is based on the concept of "smart structures" which are made of Magneto-Rheological (MR) fluid that can dynamically alter its viscosity under magnetic field. The wearable tremor suppressing orthosis needs several conditions. It should be safe, light weight, simple and small in structure, and easily attachable. An …

Optimisation Of Heat Transfer And Fluid Flow In The Cooling Of Building Integrated Photovoltaic Facades., Eoin Patrick Hodge

Theses

The aim of this research was to explore the effects of mature and developing technologies from aeronautical industries such as impingement and film cooling, and electronic cooling techniques, in the setting up of different laminar and turbulent flow regimes on PV cooling duct heat transfer rates, with air flow as that brought about with natural buoyancy effects in a vertical building facade. The problem of efficiency losses in PV panels, due to overheating, is one of the factors restricting the development and use of this renewable power source. PV panels can experience very high temperatures, due to the heat input …

Ground-Source Heat Pumps In Ireland: Heat Transfer Experimentation For The Design And Modelling Of A Sub-Slab Installation., Sarah O'Connell

Theses

Ground-source heat pump technology is currently undergoing rapid growth in Ireland. Three aspects of ground-source heat pumps have been studied in this thesis. The market expansion taking place in Ireland, heat transfer from the soil to the pipe of a ground- source heat pump collector, and the design of an innovative sub-slab ground-source heat pump system.

Initial investigations into the use of ground-source heat pumps in Ireland revealed surprising growth in the use of the technology. There have been approximately 1500 systems installed mainly since 2000. The ground-source heat pump market in Ireland has an estimated annual growth rate of …

Magneto-Acoustic Emission Analysis Of Microstructural Change In Aisi 430 And Aisi 304 Stainless Steel, Denis O'Sullivan

Theses

Magneto-acoustic emission (MAE) is a relatively new non-destructive detection technique. Its working principle is based on Barkhausen discontinuities and magnetostriction within a ferromagnetic material that is subjected to a varying magnetic field. Magneto-acoustic emission (MAE) and magnetic Barkhausen noise (MBN) sensing techniques were developed and employed to characterise plastically deformed and heat-treated AISI 430 ferritic stainless steel and AISI 304 austenitic stainless steel samples. A new waveform measurement parameter for magneto-acoustic emission was developed called MAE (Absolute “energy”).

Both MAE and MBN were found to decrease with increasing plastic deformation of AISI 430. MAE (Absolute “energy”) and MBN (RMS) were …

Synthesis Of Nano/Micro Particles Using Supercritical Method And Particle Characterization, Abhijit Aniruddha Gokhale

Theses

The thesis work consists of the two parts, jet behavior of solvents (ethanol and acetone) and the particle formation using SAS method. In the first part, the study of the effects of process parameters like temperature, pressure, injection velocity and internal diameter of nozzle on liquid jets are studied. The critical pressure for which liquid jet of solvents changes to gas - like jet, is investigated.

In the second part, the experiments are done to study the process of the particle formation using SAS method. Effects of process parameters like pressure, injection velocity of solution, the inner diameter of nozzle …

Experimental Study Of Ignition Of Mechanical Alloy And Pure Metal Powders, Ruslan Mudryy

Theses

Mechanical alloys of Al Mg, AI Zr, Al Ti, Al Li, Al C, Al Mg H, B Mg, B Al, and B Ti were produced and tested for possible applications as high energy density additives to fuels, propellants, explosives, and incendiaries. These new materials are metastable, supersaturated, nanocrystalline solid solutions that include a base metal as a solvent and another component (metal or gas, e.g. hydrogen) as a solute. Phase changes occurring in such materials during ignition and combustion are expected to significantly affect both ignition and bum rates. This experimental program focused on the characterization of ignition kinetics of …

Direct Simulation Of Electrorheological Suspensions Subjected To Pressure Driven Flow And Spatially Non-Uniform Electric Field, Arun Thankamony John Kadaksham

Theses

A numerical method based on the distributed Lagrange Multiplier method is developed for direct simulation of electrorheological (ER) suspensions subjected to pressure driven flows and spatially non-uniform electric fields. The flow inside particle boundaries is constrained to be rigid body motion by the distributed Lagrange multiplier method and the point-dipole approximation is used to model the electrostatic forces acting on the polarized particles. Simulations show that the particles move to the regions of high electric field when the value of β, the Clausius-Mossotti factor is positive and they move to the regions of low electric field when the value of …

Analysis Of Random Packing Of Uniform Spheres Using The Monte Carlo Simulation Method, Sai S. Tulluri

Theses

The study of random packing of spheres has had a long history. It particularly interests many researchers because randomly packed hard spheres exhibit some features of the properties of simple liquid, e.g. the packing density and the radial distribution. Many researchers have studied random packing both experimentally and also by using computer simulation.

Monte Carlo simulation method was used to generate random loose packing of hard spheres. Packing characteristics like packing density, radial distribution function, co-ordination, angular distribution and fabric tensor have been computed for this packing system.

The packing density for a system of 8000 particles with a diameter …

Addition Of A Chain-Cell Search Method And A Van Der Waals Force Model To A Particle Dynamics Code, Michael J. Sweetman

Theses

This project studies the implementation of a computational time saving technique and adds an additional force model into a discrete element method simulation code. Both aspects of the project are focused on increasing the versatility of an existing particle dynamics code by increasing the execution speed and available force models for simulation.

The first portion of the project consisted of adding a function to the collision detection mechanism to hash the particles into a spatial grid. This hashing function allows a search for near neighbor particles to be restricted to the space immediately adjacent to the particle of interest, thereby …

Discrete Element Simulation And Nonlinear Dynamic Analysis Of Particles In A Simple Lattice Structure, Liam E. Buckley

Theses

The study of particles interacting in lattice structures allows for insight into the complex interactions of granular flow, and the adaptation of such structures to mechanical apparatuses to handle the separation of bulk particulate matter. Applying methods of computer analysis to the interactions taking place within the particle-lattice system provides a particle level methodology to the study of the phenomenon taking place, as well as a stepping stone for future design of related devices.

A two prong approach is presented to the study of such particle-lattice systems. The first approach is composed of adapting an existing discrete element computer code …