Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Discipline
Keyword
Publication Year

Articles 721 - 750 of 1144

Full-Text Articles in Mechanical Engineering

Sorting Results Of Automated Concept Generators Based On Design For Manufacture And Assembly, Kerry R. Poppa, Robert B. Stone Jun 2010

Sorting Results Of Automated Concept Generators Based On Design For Manufacture And Assembly, Kerry R. Poppa, Robert B. Stone

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Early in the design process, it is desirable to produce a large number of potential solutions. Completely exploring a problem's solution space is an unreasonable expectation for an unaided designer or design team. Computational tools have emerged to help designers more fully explore possible solutions. These automated concept generators use knowledge from existing designs and the desired functionality of the new product to suggest solutions. Existing automated concept generation methods produce many candidate solutions, but often provide unmanageably large sets of solutions. Techniques are needed to organize the set of concepts into smaller groups, more easily parsed by the human …

Go to article

A Natural Language To Component Term Methodology: Towards A Form Based Concept Generation Tool, Matt Robert Bohm, Robert B. Stone Jun 2010

A Natural Language To Component Term Methodology: Towards A Form Based Concept Generation Tool, Matt Robert Bohm, Robert B. Stone

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Over the last few decades design researchers have put forward theories and proposed methodologies that increase the chance that a design team will reliably arrive at the optimal solution to a given design problem. Studies, however, bear out that theories and methodologies alone will not guarantee an optimal or even good design solution. Instead, a breadth of knowledge across multiple engineering domains and the time and tools to thoroughly evaluate the design space are as important as any prescriptive design method. This work presents one of the underlying engineering technologies needed to leverage artificial intelligence approaches to thoroughly search the …

Go to article

Measurement Of Refractive Index Change Of Optical Fiber Core Induced By Femtosecond Laser Scanning, Y. Han, T. Wei, Hai-Lung Tsai, Hai Xiao Jun 2010

Measurement Of Refractive Index Change Of Optical Fiber Core Induced By Femtosecond Laser Scanning, Y. Han, T. Wei, Hai-Lung Tsai, Hai Xiao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We report a new method to measure the refractive index change in optical fiber core induced by femtosecond (fs) laser exposure. An in-line Fabry-Perot interferometer, serving as the measurement platform, is constructed on a commercial single-mode optical fiber by onestep femtosecond (fs) laser fabrication. A positive refractive index change is observed and measured accurately as the laser pulse energy surpasses the ablation threshold.

Go to article

Observations Of Temporal Group Delays In Slow-Light Multiple Coupled Photonic Crystal Cavities, S. Kocaman, Xiaodong Yang, J. F. Mcmillan, M. B. Yu, D. L. Kwong, C. W. Wong Jun 2010

Observations Of Temporal Group Delays In Slow-Light Multiple Coupled Photonic Crystal Cavities, S. Kocaman, Xiaodong Yang, J. F. Mcmillan, M. B. Yu, D. L. Kwong, C. W. Wong

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We demonstrate temporal group delays in coherently coupled high- Q multicavity photonic crystals, in an all-optical analog to electromagnetically induced transparency. We report deterministic control of the group delay up to 4x the single cavity lifetime in our room-temperature chip. Supported by three-dimensional numerical simulations and theoretical analyses, our multipump beam approach enables control of the multicavity resonances and intercavity phase, in both single and double transparency peaks. The standing-wave wavelength-scale photon localization allows direct scalability for chip-scale optical pulse trapping and coupled-cavity quantum electrodynamics.

Go to article

Computer Program And Method For Detecting And Predicting Valve Failure In A Reciprocating Compressor, Ming-Chuan Leu, Jagannathan Sarangapani, Raghuram Puthall Ramesh Apr 2010

Computer Program And Method For Detecting And Predicting Valve Failure In A Reciprocating Compressor, Ming-Chuan Leu, Jagannathan Sarangapani, Raghuram Puthall Ramesh

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Embodiments of the present invention provide a method implemented by a computer program for detecting and identifying valve failure in a reciprocating compressor and further for predicting valve failure in the compressor. Embodiments of the present invention detect and predict the valve failure using wavelet analysis, logistic regression, and neural networks. A pressure signal from the valve of the reciprocating compressor presents a non-stationary waveform from which features can be extracted using wavelet packet decomposition. The extracted features, along with temperature data for the valve, are used to train a logistic regression model to classify defective and normal operation of …

Go to article

Three-Dimensional Modeling Of Transport Phenomena And Their Effect On The Formation Of Ripples In Gas Metal Arc Welding, Z. H. Rao, J. Zhou, S. M. Liao, Hai-Lung Tsai Mar 2010

Three-Dimensional Modeling Of Transport Phenomena And Their Effect On The Formation Of Ripples In Gas Metal Arc Welding, Z. H. Rao, J. Zhou, S. M. Liao, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Distinct, periodic arc-shaped ripples are observed on the surface of the weld bead in almost any welded components which have a significant effect on weld quality. This article presents the complex transport phenomena and their effect on the formation of ripples in three-dimensional moving gas metal arc welding. The transient distributions of the melt flow velocity and temperature in the weld pool, weld pool shape and dynamics, and solidified weld bead are calculated. It is found that the surface ripples are formed by the interplay between the up-and-down weld pool dynamics, caused mainly by the periodic droplet impingements, and the …

Go to article

Combined H∞-Feedback Control And Iterative Learning Control Design With Application To Nanopositioning Systems, Brian E. Helfrich, Chibum Lee, Douglas A. Bristow, Jingyan Dong, Srinivasa M. Salapaka, Placid M. Ferreira, X. H. Xiao, Andrew G. Alleyne Mar 2010

Combined H∞-Feedback Control And Iterative Learning Control Design With Application To Nanopositioning Systems, Brian E. Helfrich, Chibum Lee, Douglas A. Bristow, Jingyan Dong, Srinivasa M. Salapaka, Placid M. Ferreira, X. H. Xiao, Andrew G. Alleyne

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper examines a coordinated feedback and feedforward control design strategy for precision motion control (PMC) systems. It is assumed that the primary exogenous signals are repeated; including disturbances and references. Therefore, an iterative learning control (ILC) feedforward strategy can be used. The introduction of additional non-repeating exogenous signals, including disturbances, noise, and reset errors, necessitates the proper coordination between feedback and feedforward controllers to achieve high performance. A novel ratio of repeated versus non-repeated signal power in the frequency domain is introduced and defined as the repetitive-to-non-repetitive (RNR) ratio. This frequency specific ratio allows for a new approach to …

Go to article

Effects Of Shielding Gas Compositions On Arc Plasma And Metal Transfer In Gas Metal Arc Welding, Z. H. Rao, S. M. Liao, Hai-Lung Tsai Feb 2010

Effects Of Shielding Gas Compositions On Arc Plasma And Metal Transfer In Gas Metal Arc Welding, Z. H. Rao, S. M. Liao, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This article presents the effects of shielding gas compositions on the transient transport phenomena, including the distributions of temperature, flow velocity, current density, and electromagnetic force in the arc and the metal, and arc pressure in gas metal arc welding of mild steel at a constant current input. The shielding gas considered includes pure argon, 75% Ar, 50% Ar, and 25% Ar with the balance of helium. It is found that the shielding gas composition has significant influences on the arc characteristics; droplet formation, detachment, transfer, and impingement onto the workpiece; and weld pool dynamics and weld bead profile. As …

Go to article

Measurement Sensitivity In Tapping-Mode Atomic Force Microscopy Using A Bi-Harmonic Drive Signal, Santosh R. Kodandarama, Douglas A. Bristow Jan 2010

Measurement Sensitivity In Tapping-Mode Atomic Force Microscopy Using A Bi-Harmonic Drive Signal, Santosh R. Kodandarama, Douglas A. Bristow

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In tapping mode atomic force microscopy, surface features are measured indirectly via the amplitude of the tapping cantilever. a change in surface profile is detectable only if it results in an amplitude change that is significant enough to be measured by the optics. Previous works have focused on improving sensitivity through the system's Q-factor, either by changing physical cantilever properties or using feedback control, but those approaches undesirably slow down the dynamic response. in this work we take a novel approach to sensitivity amplification by reshaping the tapping trajectory. by shaping the trajectory so that the probe spends a greater …

Go to article

Guidance And Control For Chase Uav Via Sliding Mode Approach, Takeshi Yamasaki, S. N. Balakrishnan Jan 2010

Guidance And Control For Chase Uav Via Sliding Mode Approach, Takeshi Yamasaki, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study focuses on integrated guidance and control for a chasing UAV against a maneuvering target. a sliding mode approach is selected to develop the integrated guidance and control using a full model of nonlinear, rigid body, 6 Degree-Of-Freedom equations of motion including nonlinear aerodynamics for the target-following capability and maneuverability enhancement against uncertain target maneuvers. Intermediate control variables for the integrated guidance and control system are carefully selected and approximated time derivatives of a sliding surface are applied such that a sliding surface structure is simple and sufficient to propagate the actuator input to the sliding surface in order …

Go to article

Direct Detection Of No Produced By High-Temperature Surface-Catalyzed Atom Recombination, Dušan A. Pejaković, Jochen Marschall, Lian Duan, Maria P. Martin Jan 2010

Direct Detection Of No Produced By High-Temperature Surface-Catalyzed Atom Recombination, Dušan A. Pejaković, Jochen Marschall, Lian Duan, Maria P. Martin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The surface-catalytic recombination of oxygen and nitrogen atoms to form nitric oxide was confirmed by the direct detection of product NO molecules, using single-photon laser-induced fluorescence spectroscopy. Experiments were performed from room temperature to 1200 K in a quartz diffusion-tube sidearm reactor enclosed in a high temperature tube furnace. Atomic nitrogen was generated using a microwave discharge, and atomic oxygen was produced via the rapid gas-phase titration reaction N + NO → O + N2. The use of isotopically labeled titration gases 15N16O and 15N18O allowed for the unambiguous identification of nitric oxide produced by the O + N surface …

Go to article

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers With Varying Freestream Mach Number, L. (Lian) Duan, I. Beekman, M. P. Mart́In Jan 2010

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers With Varying Freestream Mach Number, L. (Lian) Duan, I. Beekman, M. P. Mart́In

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, the effects of freestream Mach number on the statistics and large-scale structures in compressible turbulent boundary layers are investigated using direct numerical simulations (DNS). DNS of turbulent boundary layers with nominal freestream Mach number ranging from 3 to 8 are performed. The validity of Morkovin's scaling, strong Reynolds analogy, and Walz's equation are assessed. We find that many of the scaling relations used to express compressible boundary layer statistics in terms of incompressible boundary layers still hold for the range of freestream Mach number considered. Compressibility effects are enhanced with increasing freestream Mach number but remain insignificant, …

Go to article

Influence Of Interactions Between Turbulence And Radiation On Transmissivities In Hypersonic Turbulent Boundary Layers, A. M. Feldick, L. (Lian) Duan, M. F. Modest, M. P. Martín, D. A. Levin Jan 2010

Influence Of Interactions Between Turbulence And Radiation On Transmissivities In Hypersonic Turbulent Boundary Layers, A. M. Feldick, L. (Lian) Duan, M. F. Modest, M. P. Martín, D. A. Levin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the current paper, a high-fidelity large eddy simulation solver is coupled to our modified line-by-line radiative transport equation solver to study the effects of absorption turbulence-radiation interations in a hypersonic turbulent boundary layer, representative of the Orion CEV entering Earth's atmosphere, at peak heating condition. The turbulent and radiation fields represent extreme conditions typical of Orion, as the simulated boundary layer represents the region of high turbulence coupled to region of highest incident radiation. A simplification in the calculation of molecular spectra with a single temperature property database in allows for tractable calculation of spectral properties. A comparison of …

Go to article

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers. Part 2. Effect Of Wall Temperature, L. (Lian) Duan, I. Beekman, M. P. Martín Jan 2010

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers. Part 2. Effect Of Wall Temperature, L. (Lian) Duan, I. Beekman, M. P. Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, we perform direct numerical simulation (DNS) of turbulent boundary layers at Mach 5 with the ratio of wall-to-edge temperature T w/T ℘ from 1.0 to 5.4 (Cases M5T1 to M5T5). The influence of wall cooling on Morkovin's scaling, Walz's equation, the standard and modified strong Reynolds analogies, turbulent kinetic energy budgets, compressibility effects and near-wall coherent structures is assessed. We find that many of the scaling relations used to express adiabatic compressible boundary-layer statistics in terms of incompressible boundary layers also hold for non-adiabatic cases. Compressibility effects are enhanced by wall cooling but remain insignificant, and the …

Go to article

Depth And Breakthrough Detection For Laser Machining, J. P. Quitter, C. E. Yaworsky, Hai-Lung Tsai Jan 2010

Depth And Breakthrough Detection For Laser Machining, J. P. Quitter, C. E. Yaworsky, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A system comprises a working laser beam, a sensing laser beam, first and second optical elements, an optical sensor, an aperture and a controller. The first optical element generates a coaxial beam from the working laser beam and the sensing laser beam. The second optical element focuses the coaxial beam onto a workpiece, such that the working laser beam machines the workpiece and the sensing laser beam reflects from the workpiece. The optical sensor senses an intensity of the reflected sensing beam. The aperture determines a focus position by translating along the reflected sensing beam, such that the reflected intensity …

Go to article

Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation Of Nickel Thin Films, Xin Li, Lan Jiang, Hai-Lung Tsai Sep 2009

Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation Of Nickel Thin Films, Xin Li, Lan Jiang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The mechanisms of nickel thin films irradiated by femtosecond laser pulse trains are studied by a model using molecular dynamics simulations and two-temperature model. It is found that the pulse train technology can change energy transport and corresponding phase change processes. Compared with single pulse ablation at the same total fluence, the pulse trains lead to (1) lower ablation rate with more and smaller uniform nanoparticles, (2) higher film surface temperatures and longer thermalization time, (3) much lower electron thermal conductivity that can further control heat-affected zone, (4) significantly smaller film compressive stresses and tensile stresses which reduce microcracks, and …

Go to article

Development Of A Melt Pool Tracking Vision System For Laser Deposition, Todd E. Sparks, Lie Tang, Frank W. Liou Aug 2009

Development Of A Melt Pool Tracking Vision System For Laser Deposition, Todd E. Sparks, Lie Tang, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper chronicles the development of a vision system for tracking melt pool morphology in the laser metal deposition process. This development is to augment an existing temperature feedback control system. Monitoring both the temperature and shape of the melt pool is necessary because of the effects of local geometry on the cooling rate at the melt pool. Temperature feedback alone cannot accommodate this effect without complex process planning. The vision system's hardware, software, and integration into the laser deposition system's controller is detailed in this paper. Preliminary testing and the effects on depositionquality is also discussed.

Go to article

Evaluation Of Direct Diode Laser Deposited Stainless Steel 316l On 4340 Steel Substrate For Aircraft Landing Gear Application, Tian Fu, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Zhiqiang Fan, Syamala Rani Pulugurtha, Jianzhong Ruan, Hsin-Nan Chou Aug 2009

Evaluation Of Direct Diode Laser Deposited Stainless Steel 316l On 4340 Steel Substrate For Aircraft Landing Gear Application, Tian Fu, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Zhiqiang Fan, Syamala Rani Pulugurtha, Jianzhong Ruan, Hsin-Nan Chou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

300M steel is used extensively for aircraft landing gears because of its high strength, ductility and toughness. However, like other high-strength steels, 300M steel is vulnerable to corrosion fatigue and stress corrosion cracking, which can lead to catastrophic consequences in the landing gear. Stainless steels offer a combination of corrosion, wear, and fatigue properties. But for an aircraft landing gear application a higher surface hardness is required. A laser cladding process with fast heating and cooling rates can improve the surface hardness. AISI 4340 steel is used as a lower cost alternative to 300M due to its similar composition. In …

Go to article

Increase Of Heat Transfer To Reduce Build Time In Rapid Freeze Prototyping, Ming-Chuan Leu, Sriram Praneeth Isanaka, Von Richards Aug 2009

Increase Of Heat Transfer To Reduce Build Time In Rapid Freeze Prototyping, Ming-Chuan Leu, Sriram Praneeth Isanaka, Von Richards

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Reduction of part build time in the Rapid Freeze Prototyping (RFP) process, which fabricates a 3D ice part layer-by-layer by depositing and freezing water droplets, has been achieved by increase of heat transfer. Three mechanisms have been experimentally investigated: 1) cooling the substrate, 2) use of forced convection, and 3) use of a chilling plate. Cooling the substrate is effective for parts of small heights but becomes ineffective with increase in part height. Forced convection produced desirable reduction in part build time but with the undesirable formation of frost on the built ice part. The use of chilling plate to …

Go to article

Development Of Extrusion-On-Demand For Ceramic Freeze-Form Extrusion Fabrication, Thomas Oakes, Parimal Kulkarni, Robert G. Landers, Ming-Chuan Leu Aug 2009

Development Of Extrusion-On-Demand For Ceramic Freeze-Form Extrusion Fabrication, Thomas Oakes, Parimal Kulkarni, Robert G. Landers, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the Freeze-form Extrusion Fabrication (FEF) process, extrusion-on-demand (EOD) refers to the ability to control the start and stop of paste extrusion on demand and is vital to the fabrication of parts with complex geometries. This paper describes the development of EOD for ceramic FEF through modeling and control of extrusion force, selection of appropriate process parameters, and a dwell technique for start and stop of extrusion. A general tracking controller with integral action is used to allow tracking of a variety of reference forces while accounting for the variability in the paste properties. Experiments are conducted to model the …

Go to article

Fuel Cell Development Using Additive Manufacturing Technologies -- A Review, Nikhil P. Kulkarni, Gargi Tandra, Frank W. Liou, Todd E. Sparks, Jianzhong Ruan Aug 2009

Fuel Cell Development Using Additive Manufacturing Technologies -- A Review, Nikhil P. Kulkarni, Gargi Tandra, Frank W. Liou, Todd E. Sparks, Jianzhong Ruan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Fuel cells are being perceived as the future clean energy source by many developed countries in the world. The key today for clean power is the reliance of fuel cells not only to power automobiles but also for residential, small commercial, backup power etc. which calls for production on a large scale. Additive manufacturing is perceived as a way to develop cost effective fuel cells. It imparts flexibility to design different kinds of fuel cells along with reduction in material wastage. This paper deals with the review of additive manufacturing processes for research and development of fuel cell components, such …

Go to article

A New State Observer And Flight Control Of Highly Maneuverable Aircraft, S. N. Balakrishnan, Ming Xin Jun 2009

A New State Observer And Flight Control Of Highly Maneuverable Aircraft, S. N. Balakrishnan, Ming Xin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, a new nonlinear observer (θ-D observer) is proposed to estimate the feedback states for optimal control of a highly maneuverable aircraft. This observer is derived by constructing the dual of a recently developed nonlinear optimal control technique-known as the θ-D technique. The θ-D optimal control approach provides an approximate closed-form solution to the Hamilton-Jacobi-Bellman (HJB) equation. An optimal flight controller using this technique is designed for a highly maneuverable aircraft operating at high angle of attack where the θ-D observer is employed to estimate the states for feedback. The structure of this observer is similar to the …

Go to article

Thermal Converter Devices, Systems And Control Methods, Richard A. Flanagan, Rod E. Hosilyk, Rob Arlt, Kakkattukuzhy M. Isaac, Ronald E. Loving, David Alan Gordon Jan 2009

Thermal Converter Devices, Systems And Control Methods, Richard A. Flanagan, Rod E. Hosilyk, Rob Arlt, Kakkattukuzhy M. Isaac, Ronald E. Loving, David Alan Gordon

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A system is provided for reducing exhaust emissions. The system can comprise a series of chambers, an injector head, and a controller. The controller can maintain desired temperature zones and chemical environments inside the series of chambers, and the chambers and structures inside the system 10 can provide a desired travel path for the air, fuel, and untreated exhaust mixture inside.

Go to article

Procedure To Validate Direct Numerical Simulations Of Wall-Bounded Turbulence Including Finite-Rate Reactions, Lian Duan, M. Pino Martín Jan 2009

Procedure To Validate Direct Numerical Simulations Of Wall-Bounded Turbulence Including Finite-Rate Reactions, Lian Duan, M. Pino Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper first discusses the constitutive relations and surface catalytic model for direct numerical simulation of wall-bounded turbulence including finite-rate chemistry and gas-surface interaction and then provides a systematic procedure to test the validity of the simulations by dividing the whole problem into different components and testing each component separately. Namely, comparisons against similarity solutions and other established hypersonic boundary-layer solutions are used to test the validity of laminar mean flow with and without gas-phase chemical reactions; comparisons against the analytic solution for the one-dimensional diffusion equation are used to test the validity of the surface catalysis boundary condition; and …

Go to article

Translating Terms Of The Functional Basis Into Biologically Meaningful Keywords, Hyunmin Cheong, L. H. Shu, Robert B. Stone, Daniel A. Mcadams Dec 2008

Translating Terms Of The Functional Basis Into Biologically Meaningful Keywords, Hyunmin Cheong, L. H. Shu, Robert B. Stone, Daniel A. Mcadams

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Biology has long been recognized as an excellent source of analogies and stimuli for engineering design. Previous work focused on the systematic identification of relevant biological analogies by searching for instances of functional keywords in biological information in natural language format. This past work revealed that engineering keywords couldn't always be used to identify the most relevant biological analogies, as the vocabularies between biology and engineering are sufficiently distinct. Therefore, a method of identifying biologically meaningful keywords that correspond to engineering keywords was developed. Here, we apply and refine this method by generating biologically meaningful keywords for the terms of …

Go to article

A Retrospective On Twenty Years Of The Design Theory And Methodology Conference, Jacquelyn K. Stroble, Robert L. Nagel, Kerry R. Poppa, Matt Robert Bohm, Robert B. Stone Dec 2008

A Retrospective On Twenty Years Of The Design Theory And Methodology Conference, Jacquelyn K. Stroble, Robert L. Nagel, Kerry R. Poppa, Matt Robert Bohm, Robert B. Stone

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Since its birth from the Design Automation Conference (DAC) and the Association for the Advancement of Artificial Intelligence (AAAI) twenty years ago, the Design Theory and Methodology (DTM) Conference has accepted 769 papers for presentation in a total of 179 tracks. Papers have covered advances in design theory and methods as well as design education, decision making, product development, collaborative endeavors, case studies, information processing, computational methods and industrial applications. through the years tracks have evolved to better define existing research topics and branched to spawn new areas of interest. This paper presents a retrospective of the past twenty years …

Go to article

Determination Of Vibrational Energy Levels And Transition Dipole Moments Of Co2 Molecules By Density Functional Theory, Zhi Liang, Hai-Lung Tsai Dec 2008

Determination Of Vibrational Energy Levels And Transition Dipole Moments Of Co2 Molecules By Density Functional Theory, Zhi Liang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An Efficient Method is Presented to Calculate the Intra-Molecular Potential Energies and Electrical Dipole Moments of CO2 Molecules at the Electronic Ground State by Solving the Kohn-Sham (KS) Equation for a Total of 101 992 Nuclear Configurations. the Projector-Augmented Wave (PAW) Exchange-Correlation Potential Functionals and Plane Wave (PW) Basis Functions Were Used in Solving the KS Equation. the Calculated Intra-Molecular Potential Function Was Then Included in the Pure Vibrational Schrödinger Equation to Determine the Vibrational Energy Eigen Values and Eigen Functions. the Vibrational Wave Functions Combined with the Calculated Dipole Moment Function Were Used to Determine the Transition Dipole Moments. …

Go to article

Three-Dimensional Modeling Of The Plasma Arc In Arc Welding, Gu Xu, J. Hu, Hai-Lung Tsai Nov 2008

Three-Dimensional Modeling Of The Plasma Arc In Arc Welding, Gu Xu, J. Hu, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most previous three-dimensional modeling on gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) focuses on the weld pool dynamics and assumes the two-dimensional axisymmetric Gaussian distributions for plasma arc pressure and heat flux. In this article, a three-dimensional plasma arc model is developed, and the distributions of velocity, pressure, temperature, current density, and magnetic field of the plasma arc are calculated by solving the conservation equations of mass, momentum, and energy, as well as part of the Maxwell's equations. This three-dimensional model can be used to study the nonaxisymmetric plasma arc caused by external perturbations such as …

Go to article

A Plasma Model Combined With An Improved Two-Temperature Equation For Ultrafast Laser Ablation Of Dielectrics, Lan Jiang, Hai-Lung Tsai Nov 2008

A Plasma Model Combined With An Improved Two-Temperature Equation For Ultrafast Laser Ablation Of Dielectrics, Lan Jiang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

It remains a big challenge to theoretically predict the material removal mechanism in femtosecond laser ablation. To bypass this unresolved problem, many calculations of femtosecond laser ablation of nonmetals have been based on the free electron density distribution without the actual consideration of the phase change mechanism. However, this widely used key assumption needs further theoretical and experimental confirmation. by combining the plasma model and improved two-temperature model developed by the authors, this study focuses on investigating ablation threshold fluence, depth, and shape during femtosecond laser ablation of dielectrics through nonthermal processes (the Coulomb explosion and electrostatic ablation). The predicted …

Go to article

Adaptive Control Of Freeze-Form Extrusion Fabrication Processes, Xiyue Zhao, Robert G. Landers, Ming-Chuan Leu Oct 2008

Adaptive Control Of Freeze-Form Extrusion Fabrication Processes, Xiyue Zhao, Robert G. Landers, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Freeze-form Extrusion Fabrication (FEF) is an additive manufacturing process that extrudes high solids loading aqueous ceramic pastes in a layer-by-layer fashion below the paste freezing temperature for component fabrication. Due to effects such as the air bubble release, agglomerate breakdown, change in paste properties during extrusion as a result of liquid phase migration, etc., the extrusion force is difficult to control. In this paper, an adaptive controller is proposed to regulate the extrusion force. Recursive Least Squares is used to estimate extrusion force model parameters during fabrication and a low-order control scheme capable of tracking general reference trajectories is designed …

Go to article

First Prev Next Last