Mechanical Engineering Commons^™

An Experimental Investigation Of Wing-Tip Vortex Decay In Turbulence, Hai G. Ghimire, Sean C. C. Bailey

Mechanical Engineering Faculty Publications

Particle image velocimetry measurements were conducted for a wing-tip vortex decaying in free-stream turbulence. The vortex exhibited stochastic collapse with free-stream turbulence present, with the breakdown initiating earlier for higher levels of turbulence. An increased rate of decay of the vortex tangential velocity was also observed, increasing with increasing free-stream turbulence. The decay of the vortex tangential velocity without the free-stream turbulence was well represented by viscous diffusion, resulting in an increase in the core radius and decrease in the peak tangential velocity. With the addition of free-stream turbulence, the rate of decay of the peak tangential velocity of the …

Sustainable Manufacturing Performance Evaluation: Integrating Product And Process Metrics For Systems Level Assessment, Aihua Huang, Fazleena Badurdeen

Mechanical Engineering Faculty Publications

This paper builds on the previously developed product sustainability index (ProdSI) and process sustainability index (ProcSI), and presents a framework for sustainable manufacturing performance evaluation at the systems level. The framework is then used to propose a comprehensive set of metrics for the enterprise level following a five-stage metrics hierarchy (individual metrics, sub-clusters, clusters, sub-index and index). The 6R concept (reduce, reuse, recycle, recover, redesign and remanufacture), total life-cycle emphasis, and triple bottom line (TBL) are considered for selecting relevant metrics. Finally, the metrics are integrated to develop an index for enterprise level sustainability assessment and …

Intracellular Nanoparticle Dynamics Affected By Cytoskeletal Integrity, Martha E. Grady, Emmabeth Parrish, Matthew A. Caporizzo, Sarah C. Seeger, Russell J. Composto, David M. Eckmann

Mechanical Engineering Faculty Publications

The cell interior is a crowded chemical space, which limits the diffusion of molecules and organelles within the cytoplasm, affecting the rates of chemical reactions. We provide insight into the relationship between non-specific intracellular diffusion and cytoskeletal integrity. Quantum dots entered the cell through microinjection and their spatial coordinates were captured by tracking their fluorescence signature as they diffused within the cell cytoplasm. Particle tracking revealed significant enhancement in the mobility of biocompatible quantum dots within fibrosarcoma cells versus their healthy counterparts, fibroblasts, as well as in actin destabilized fibroblasts versus untreated fibroblasts. Analyzing the displacement distributions provided insight into …

Laser Shock Wave Assisted Patterning On Niti Shape Memory Alloy Surfaces, Dovletgeldi Seyitliyev, Peizhen Li, Khomidkhodza Kholikov, Byron Grant, Haluk E. Karaca, Ali O. Er

Mechanical Engineering Faculty Publications

An advanced direct imprinting method with low cost, quick, and less environmental impact to create thermally controllable surface pattern using the laser pulses is reported. Patterned micro indents were generated on Ni₅₀Ti₅₀ shape memory alloys (SMA) using an Nd:YAG laser operating at 1064 nm combined with suitable transparent overlay, a sacrificial layer of graphite, and copper grid. Laser pulses at different energy densities which generates pressure pulses up to 10 GPa on the surface was focused through the confinement medium, ablating the copper grid to create plasma and transferring the grid pattern onto the NiTi surface. Scanning …

Recoverable Stress Induced Two-Way Shape Memory Effect On Niti Surface Using Laser-Produced Shock Wave, Dovletgeldi Seyitliyev, Peizhen Li, Khomidkhodza Kholikov, Byron Grant, Zachary Thomas, Orhan Alal, Haluk E. Karaca, Ali O. Er

Mechanical Engineering Faculty Publications

The surfaces of Ni50Ti50 shape memory alloys (SMAs) were patterned by laser scribing. This method is more simplistic and efficient than traditional indentation techniques, and has also shown to be an effective method in patterning these materials. Different laser energy densities ranging from 5 mJ/pulse to 56 mJ/pulse were used to observe recovery on SMA surface. The temperature dependent heat profiles of the NiTi surfaces after laser scribing at 56 mJ/pulse show the partially-recovered indents, which indicate a "shape memory effect (SME)" Experimental data is in good agreement with theoretical simulation of laser induced shock wave propagation inside NiTi SMAs. …

A Vertical Axis Wave Turbine With Hydrofoil Blades, Yingchen Yang, Isaiah Diaz, Sergio Soto Quintero

Mechanical Engineering Faculty Publications

This work discusses a new wave energy converter (WEC) design that, when deployed in waves, performs unidirectional rotation about a vertical shaft. The uniqueness of this new WEC design is on utilizing omnidirectional water flow generated by waves to drive a rotor to perform unidirectional rotation about a vertical axis. This unique feature circumvents the frequency-dependent issue of common WECs, and eliminate realignment needs to cope with dynamically changing wave propagation directions. The key component of the WEC is a rotor, which has a vertical shaft with a number of blades mounted to it. Each blade has a hydrofoil-shaped cross …

Frequency Response Reduced Order Model Of Primary Resonance Of Electrostatically Actuated Mems Circular Plate Resonators, Dumitru I. Caruntu, Reynaldo Oyervides

Mechanical Engineering Faculty Publications

This paper deals with the amplitude-frequency response of soft AC electrostatically actuated MEMS clamped circular plates. Alternating Current (AC) frequency is near half natural frequency of the plate. This results in primary resonance of the system. Two methods are used and compared, namely the Method of Multiple Scales (MMS), and Reduced Order Model (ROM). Both methods are in excellent agreement for amplitudes less than 0.4 of the gap. For amplitudes between 0.4 and 1 of the gap only seven terms ROM accurately predicts the behavior of the system. The effects of the voltage and damping parameters on the frequency response …

Edge Geometry Effects On Resonance Response Of Electroplated Cylindrical Ni/Pzt/Ni Magnetoelectric Composites, Vladislav Yakubov, Lirong Xu, Alex A. Volinsky, Lijie Qiao, De’An Pan

Mechanical Engineering Faculty Publications

Trilayer Ni/PZT/Ni cylindrical magnetoelectric (ME) composites were prepared by electrodeposition, a process, which creates sub-millimeter raised edges due to current concentration near sharp points. The ME response in both axial and vertical modes was measured with the edges, with only outer edges removed, and with both outer and inner edges removed. The ME voltage coefficient improved at resonance by 40% and 147% without the edges in the vertical and axial modes, respectively. The observed improvements in three different samples were only present at the ME resonance and no changes were detected outside of the ME resonance. Mechanical quality factor at …

Modified Qigong Breathing Exercise For Reducing The Sense Of Hunger On An Empty Stomach, Alexander P. Voroshilov, Alex A. Volinsky, Zhixin Wang, Elena V. Marchenko

Mechanical Engineering Faculty Publications

Background: The aims of this study were to determine whether a modified Qigong breathing exercise can reduce the sense of hunger and identify possible mechanisms.

Methods: The results from the test group, which performed the exercise, are compared with the control group, which performed deep breathing. Intestinal pressure measurements, stomach pH monitoring, and participant surveys were used for assessment.

Results: Stomach pH was increased by 3 (0.2) and intestinal pressure was reduced by 12 (0.5) mm Hg in the experimental group and did not change significantly in the control group. The study provides strong evidence that the exercise can significantly …

Onboard Load Sensor For Use In Freight Railcar Applications, Constantine Tarawneh, Jazmin Ley, Dylan Blackwell, Stephen Crown, Brent Wilson

Mechanical Engineering Faculty Publications

Approximately 40% of intercity freight transportation occurs by rail, making it the most widely used method of transporting large commodities. This trend is expected to persist over the next thirty years as our highway systems are strained and experiencing increased congestion and costly delays. Currently, the load of freight railcars is typically measured by weighbridges or retrofitted tracks at isolated locations. This practice is not efficient and limited by the fact that the load of the railcar cannot be monitored continuously, not to mention the inherent inaccuracies of such systems. Hence, there is great merit for an onboard load sensor …

Dependence Of Photoelectrochemical Properties On Geometry Factors Of Interconnected “Caterpillar-Like” Zno Networks, Qiang Li, Xing Sun, Karen Lozano, Yuanbing Mao

Mechanical Engineering Faculty Publications

Highlights

• Hierarchical “caterpillar-like” ZnO nanostructures have been prepared through a hybrid route.

• The ease and high throughput of the method favors a feasible PEC applications.

• The tunability of the geometric factors could optimize the light-material interaction.

• Ultralong and ultrathin branches shorten minority carrier diffusion lengths to further improve PEC performance.

Abstract

To elevate the spatial occupancy of one-dimensional ZnO nanostructures and overcome the limitations of multistep seeding methods currently widely used, a rational, facile and high-yielding procedure has been reported by our group previously for the fabrication of the interconnected three-dimensional “caterpillar-like” ZnO nanostructured networks (CZNs) for photoelectrochemical applications. In …

Finite Element Simulation And Additive Manufacturing Of Stiffness-Matched Niti Fixation Hardware For Mandibular Reconstruction Surgery, Ahmadreza Jahadakbar, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi, David Dean, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Process parameters and post-processing heat treatment techniques have been developed to produce both shape memory and superelastic NiTi using Additive Manufacturing. By introducing engineered porosity, the stiffness of NiTi can be tuned to the level closely matching cortical bone. Using additively manufactured porous superelastic NiTi, we have proposed the use of patient-specific, stiffness-matched fixation hardware, for mandible skeletal reconstructive surgery. Currently, Ti-6Al-4V is the most commonly used material for skeletal fixation devices. Although this material offers more than sufficient strength for immobilization during the bone healing process, the high stiffness of Ti-6Al-4V implants can cause stress shielding. In this paper, …

Sputtering Power Effects On Growth And Mechanical Properties Of Cr2alc Max Phase Coatings, Muhammad Naveed, Aleksei Obrosov, Andrzej Zak, Wlodzimierz Dudzinski, Alex A. Volinsky, Sabine Weiß

Mechanical Engineering Faculty Publications

Coating growth and mechanical properties of nanolamellar Cr₂AlC coatings at various sputtering power were investigated in the present study. Cr₂AlC coating was deposited on the IN 718 superalloy and (100) Si wafers by DC magnetron sputtering at different sputtering powers. The structure and properties were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nanoindentation. It was found that coatings had columnar structure with nanocrystalline substructure. Deposition rate increased with the sputtering power. XRD results showed the presence of the Cr₂AlC MAX phase, intermetallic AlCr₂ and Cr_{7 …}

Human-Like Rewards To Train A Reinforcement Learning Controller For Planar Arm Movement, Kathleen M. Jagodnik, Philip S. Thomas, Antonie J. Van Den Bogert, Michael S. Branicky, Robert F. Kirsch

Mechanical Engineering Faculty Publications

High-level spinal cord injury (SCI) in humans causes paralysis below the neck. Functional electrical stimulation (FES) technology applies electrical current to nerves and muscles to restore movement, and controllers for upper extremity FES neuroprostheses calculate stimulation patterns to produce desired arm movement. However, currently available FES controllers have yet to restore natural movements. Reinforcement learning (RL) is a reward-driven control technique; it can employ user-generated rewards, and human preferences can be used in training. To test this concept with FES, we conducted simulation experiments using computer-generated ``pseudohuman{''} rewards. Rewards with varying properties were used with an actor-critic RL controller for …

Front Dynamics And Entrainment Of Finite Circular Gravity Currents On An Unbounded Uniform Slope, ‪Nadim Zgheib, A. Ooi, S. Balachandar

Mechanical Engineering Faculty Publications

We report on the dynamics of circular finite-release Boussinesq gravity currents on a uniform slope. The study comprises a series of highly resolved direct numerical simulations for a range of slope angles between 5∘ and 20∘ . The simulations were fixed at Reynolds number Re=5000 for all slopes considered. The temporal evolution of the front is compared to available experimental data. One of the interesting aspects of this study is the detection of a converging flow towards the centre of the gravity current. This converging flow is a result of the finite volume of the release coupled with the presence …

Evolution Of The Automotive Body Coating Process—A Review, Nelson K. Akafuah, Sadegh Poozesh, Ahmad Salaimeh, Gabriela Patrick, Kevin Lawler, Kozo Saito

Mechanical Engineering Faculty Publications

Automotive coatings and the processes used to coat automobile surfaces exemplify the avant-garde of technologies that are capable of producing durable surfaces, exceeding customers’ expectations of appearance, maximizing efficiency, and meeting environmental regulations. These accomplishments are rooted in 100 years of experience, trial-and-error approaches, technique and technology advancements, and theoretical assessments. Because of advancements directed at understanding the how, why, when, and where of automobile coatings, the progress in controlling droplets and their deposition attributes, and the development of new technologies and paint chemistries, a comprehensive and up-to-date review of automobile coatings and coating technologies was considered to be of …

Temperature Profiles Of Railroad Tapered Roller Bearings With Defective Inner And Outer Rings, Constantine Tarawneh, Luz Sotelo, Anthony A. Villarreal, Nancy De Los Santos, Ryan L. Lechtenberg, Robert Jones

Mechanical Engineering Faculty Publications

In the railroad industry, monitoring the condition of key components such as bearings and wheels is vital to ensure the safe transport of goods and commodities. Bearing seizures are amongst the most dangerous types of failures experienced by trains because they occur unexpectedly and may lead to costly derailments. Current bearing health monitoring techniques include tracking the temperature and acoustic emissions given by the bearings. Although temperature histories of railroad tapered roller bearings are readily available, the literature does not provide information relating the temperature profiles to the severity of the bearing defect. The study presented here investigates the correlation …

Heat Generation In The Railroad Bearing Thermoplastic Elastomer Suspension Element, Oscar O. Rodriguez, Juan Carbone, Arturo A. Fuentes, Robert E. Jones, Constantine Tarawneh

Mechanical Engineering Faculty Publications

The main purpose of this ongoing study is to investigate the effect of heat generation within a railroad thermoplastic elastomer suspension element on the thermal behavior of the railroad bearing assembly. Specifically, the purpose of this project is to quantify the heat generated by cyclic loading of the elastomer suspension element as a function of load amplitude, loading frequency, and operating temperature. The contribution of the elastomer pad to the system energy balance is modeled using data from dynamic mechanical analysis (DMA) of the specific materials in use for that part. DMA is a technique that is commonly used to …

Eigenstress Model For Electrochemistry Of Solid Surfaces, Hongxin Ma, Xilin Xiong, Panpan Gao, Xi Li, Yu Yan, Alex A. Volinsky, Yanjing Su

Mechanical Engineering Faculty Publications

Thermodynamic analysis and molecular dynamics simulations were conducted to systematically study the size-dependent electrochemical response of solids. By combining the generalized Young-Laplace equation with the popular Butler-Volmer formulation, the direct influence of surface stress on solid film electrochemical reactions was isolated. A series of thermodynamic formulas were developed to describe the size-dependent electrochemical properties of the solid surface. These formulas include intrinsic surface elastic parameters, such as surface eigenstress and surface elastic modulus. Metallic films of Au, Pt, Ni, Cu and Fe were studied as examples. The anodic current density of the metal film increased, while the equilibrium potential decreased …

Mechanical And Electrical Characterization Of Carbon Nanofibers Produced From Water Soluble Precursors, Lee D. Cremar, Javier Acosta-Martinez, Alexsandra Villarreal, Alfonso Salinas, Karen Lozano

Mechanical Engineering Faculty Publications

This study presents the thermo-physical, electrical, and mechanical characterization of fine carbon fibers produced from water-soluble polymer precursors and low temperature processes. These fibers were developed utilizing the Forcespinning® technology which utilizes centrifugal force to spin fibers. Polyvinyl alcohol was used as the precursor material, and fibers were developed and deposited in a non-woven configuration. The resultant non-woven fiber mats were subjected to a dehydration process through exposure to sulfuric acid vapors. The partially carbonized mats were heat treated at 850 °C. The produced porous nonwoven carbon fiber based mats have micro-and mesoporosity with a final fiber average diameter of …

Dynamic Recrystallization Behavior And Processing Map Of The Cu–Cr–Zr–Nd Alloy, Yi Zhang, Huili Sun, Alex A. Volinsky, Baohong Tian, Kexing Song, Zhe Chai, Ping Liu, Yong Liu

Mechanical Engineering Faculty Publications

Hot deformation behavior of the Cu–Cr–Zr–Nd alloy was studied by hot compressive tests in the temperature range of 650–950 °C and the strain rate range of 0.001–10 s⁻¹ using Gleeble-1500D thermo-mechanical simulator. The results showed that the flow stress is strongly dependent on the deformation temperature and the strain rate. With the increase of temperature or the decrease of strain rate, the flow stress significantly decreases. Hot activation energy of the alloy is about 404.84 kJ/mol and the constitutive equation of the alloy based on the hyperbolic-sine equation was established. Based on the dynamic material model, the processing map …

Parametric Analysis Of A Solid Oxide Fuel Cell Auxiliary Power Unit Operating On Syngas Produced By Autothermal Reforming Of Hydrocarbon Fuels, Jun Dong, Xinhai Xu, Ben Xu, Shuyang Zhang

Mechanical Engineering Faculty Publications

A 1 kWe integrated auxiliary power unit (APU) system consisting of an autothermal reformer and a solid oxide fuel cell (SOFC) unit, as well as balance-of-plant components, was designed and analyzed. A relatively easy-to-approach SOFC model was developed in order to conveniently calculate V-I and P-I curves and the system's net efficiency at different operating conditions. The effects of steam to carbon and oxygen to carbon ratios in the reactants, channel dimensions of the SOFC unit, and hydrocarbon fuel types on the integrated APU system's performance were discussed. Five hydrocarbon fuels including diesel, Jet-A, gasoline, ethanol, and methanol were studied …

Spatio-Temporal Linear Stability Analysis Of Stratified Planar Wakes: Velocity And Density Asymmetry Effects, Benjamin Emerson, Swapnil Jagtap, J. Mathew Quinlan, Michael W. Renfro, Baki M. Cetegen, Tim Lieuwen

Mechanical Engineering Faculty Publications

This paper explores the hydrodynamic stability of bluff body wakes with non-uniform mean density, asymmetric mean density, and velocity profiles. This work is motivated by experiments [S. Tuttle et al., “Lean blow off behavior of asymmetrically-fueled bluff body-stabilized flames,” Combust. Flame 160, 1677 (2013)], which investigated reacting wakes with equivalence ratio stratification and, hence, asymmetry in the base flow density profiles. They showed that highly stratified cases exhibited strong, narrowband oscillations, suggestive of global hydrodynamic instability. In this paper, we present a local hydrodynamic stability analysis for non-uniform density wakes that includes base flow asymmetry. The results show …

Composite Nanofibers As Advanced Materials For Li-Ion, Li-O2 And Li-S Batteries, Victor Agubra, Luis Zuniga, David Flores, Jahaziel Villarreal, Mataz Alcoutlabi

Mechanical Engineering Faculty Publications

The quest to increase the energy density and improve the cycle life performance of lithium ion batteries (LIBs) and beyond has led to the development of various suitable and alternative materials for energy storage and conversion. The morphology and electrode architecture in advanced battery materials have been re-designed into nanofibers and composite nanofibers. Nanofiber-based separators and electrodes have demonstrated to improve the energy density and cycling performance of LIBs. The improvement in the structure and morphology of nanofibers in LIBs such as LiSi and LiSn, have once again ignited the interest in these Li:M alloy anodes as alternative anode and …

The Effects Of Thermal Procedure On Transformation Temperature, Crystal Structure And Microstructure Of Cu-Al-Co Shape Memory Alloy, Y. Aydoğdu, M. Kök, F. Dağdelen, A. Aydoğdu, Ali S. Turabi, Haluk E. Karaca

Mechanical Engineering Faculty Publications

The purpose of this study is to investigate the effects of different thermal procedures of the Cu-Al-Co shape memory alloy on its crystal structure, transformation temperature and microstructure. The alloys were subjected to a heat treatment and then cooling was applied at four different conditions. After the thermal process, XRD, DSC, optical microscopy and micro-hardness measurements were carried out. The experimental studies showed that crystal structure, microstructure and transformation temperature of Cu-Al-Co alloy were changed from the cooling conditions.

Effect Of Spalled Particles Thermal Degradation On A Hypersonic Flow Field Environment, Raghava S. C. Davuluri, Huaibao Zhang, Alexandre Martin

Mechanical Engineering Faculty Publications

Two-way coupling is performed between a spallation code and a hypersonic aerothermodynamics CFD solver to evaluate the effect of spalled particles on the flow field. Time accurate solutions are computed in argon and air flow fields. A single particle simulations and multiple particles simulations are performed and studied. The results show that the carbon vapor released by spalled particles tend to change the composition of the flow field, particularly the upstream region of the shock.

On Event-Triggered Adaptive Architectures For Decentralized And Distributed Control Of Large-Scale Modular Systems, Ali Albattat, Benjamin C. Gruenwald, Tansel Yucelen

Mechanical Engineering Faculty Publications

The last decade has witnessed an increased interest in physical systems controlled over wireless networks (networked control systems). These systems allow the computation of control signals via processors that are not attached to the physical systems, and the feedback loops are closed over wireless networks. The contribution of this paper is to design and analyze event-triggered decentralized and distributed adaptive control architectures for uncertain networked large-scale modular systems; that is, systems consist of physically-interconnected modules controlled over wireless networks. Specifically, the proposed adaptive architectures guarantee overall system stability while reducing wireless network utilization and achieving a given system performance in …

Microfocusing At The Pg1 Beamline At Flash, S. Dziarzhytski, N. Gerasimova, Rene Goderich, T. Mey, M. Rübhausen, F. Siewert, H. Weigelt, G. Brenner

Mechanical Engineering Faculty Publications

The Kirkpatrick-Baez (KB) refocusing mirror system installed at the PG1 branch of the plane-grating monochromator beamline at the soft X-ray/XUV free-electron laser in Hamburg (FLASH) is designed to provide tight aberration-free focusing down to 4 µm × 6 µm full width at half-maximum (FWHM) on the sample. Such a focal spot size is mandatory to achieve ultimate resolution and to guarantee best performance of the vacuum-ultraviolet (VUV) off-axis parabolic double-monochromator Raman spectrometer permanently installed at the PG1 beamline as an experimental end-station. The vertical beam size on the sample of the Raman spectrometer, which operates without entrance slit, defines and …

Functional Performance Differences Between The Genium And C-Leg Prosthetic Knees And Intact Knees, Michael J. Highsmith, Jason T. Kahle, Rebecca M. Miro, M. E. Cress, Derek J. Lura, William S. Quillen, Stephanie Carey, Rajiv V. Dubey, Larry J. Mengelkoch

Mechanical Engineering Faculty Publications

Microprocessor prosthetic knees (MPKs) have advanced technologically, offering new features to decrease impairment and activity limitations for persons with transfemoral amputation (TFA). The Genium knee is functionally untested, and functional differences between it and intact knees are unknown. This study sought to determine whether Genium use improves functional performance compared with the C-Leg. A randomized experimental crossover design was used, with a cross-section of five nonamputee controls for comparison to nor­mal. Twenty community-ambulating persons with TFA were trained and tested for accommodation with study components. All subjects (n = 25) were assessed using the Continuous-Scale Physical Functional Performance-10 (CS-PFP10) …

User Involvement In The Partner Program Of The Educational Social Network, Ilya V. Osipov, Alex A. Volinsky, Anna Y. Praskikova

Mechanical Engineering Faculty Publications

The paper describes experiments to attract active online system users to the partner program. The objective is to grow the number of users by involving existing system users in viral mechanics. Several examples of user motivation are given, along with the specific interface implementations and viral mechanics. Viral K-factor was used as the metrics for the resulting system growth assessment. Specific examples show both positive and negative outcomes. Growth of the target system parameters is discussed.