Mechanical Engineering Commons^™

Learning In Transition: Developing And Employing Pedagogical Supports To Enhance Student Learning In Engineering Education, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Scholarly research indicates that classroom environment and conditions influence the degree of student learning, levels of engagement, and overall success in engineering education. In the wake of COVID-19, educational institutions transitioned to fully online delivery that disrupted traditional and effective channels of communication enacted in classroom contexts. For a substantial number of faculty members, this rapid transition to a fully remote instructional context marked the start a novel style of teaching and learning environment, a grand departure from the traditional, direct face-to-face setting. Such rapid and disruptive change required creative solutions to routinized instructional practices and compelling faculty to adjust …

Bend And Not Break: Examining Hispanic Engineering Student's Academic Challenges During Covid-19, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Student success in higher education remains an area of interest, particularly for underrepresented minorities. Studies reveal that while Latino college enrollment has increased, retention rates continue to be an ongoing struggle. Several factors that attribute to such low rates include academic self-concept, family support, cognitive mapping, managing resources, background characteristics, and separation and maintenance of family ties. In the wake of COVID-19, most institutions responded by terminating in-person instruction, mandating to seek off-campus housing, and shifting to a fully remote context. As such, students were unable to utilize campus resources and engage in established educational campus practices. In this research …

Keeping Calm And Staying Balanced: Exploring The Academic Pressures Faced By Engineering Students To Attain High Grades And Their Impact On Mental Health, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Studies reveal that grades have a short-term impact on students’ self-efficacy, motivation, and decision making. Earning high grades has become a focal point for engineering students to secure three types of opportunities: internships, post-graduation employment, and graduate school acceptance. Nonetheless, the desire to attain a competitive grade-point-average may lead to negative psychosocial effects such as increased mental exertion, physical exhaustion, anxiety, and overall lack of work-life balance. In this paper, the authors extend their prior study on the impact of grades in engineering education. The first study was conducted in the spring of 2019 at a tier one, small private …

Leveling The Playing Field: Enacting Equitable Pedagogy To Teach Rigid Body Dynamics, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

Research examining the quality of engineering programs across different instructions of learning has revealed that no two programs are alike. Each program has unique and distinctive features that influence the quality and rigor of education that students receive. Institutional culture, leadership, faculty preparedness, funding and many other factors influence program quality. Additionally, researchers have also noted that many institutional gaps and equity related issues are persistent and troublesome facets that further exacerbate the academic gaps in STEM education. It is within this context, that students attending top tier universities will likely have remarkedly vast academic experiences in terms of level …

Board 399: The Freshman Year Innovator Experience (Fyie): Bridging The Urm Gap In Stem, Noe Vargas Hernandez, Arturo A. Fuentes, Karen Lozano, Javier A. Ortega, Eleazar Marquez

Mechanical Engineering Faculty Publications

The project focuses on increasing “effective STEM education and broadening participation” in underrepresented minority STEM students at the University of Texas Rio Grande Valley (UTRGV) to successfully face academic and professional challenges, recently exacerbated by the COVID-19 pandemic. The Freshman Year Innovator Experience proposes the development of self-transformation skills in freshman mechanical engineering students to successfully face academic and professional challenges exacerbated by the COVID-19 pandemic while working on two parallel projects of technical design innovation and academic career pathways. The authors will present the work in progress and preliminary results from a pilot implementation of the Freshman Year Innovator …

Oxymatrine Loaded Crosslinked Pva Nanofibrous Scaffold: Design And Characterization And Anticancer Properties, Salahuddin Ahmed, Megan Keniry, Narcedalia Anaya-Barbosa, Victoria Padilla, Md Noushad Javed, Robert Gilkerson, Acharan S. Narula, Eman Ibrahim, Karen Lozano

Mechanical Engineering Faculty Publications

This study focuses on the fabrication, characterization and anticancer properties of biocompatible and biodegradable composite nanofibers consisting of poly(vinyl alcohol) (PVA), oxymatrine (OM), and citric acid (CA) using a facile and high-yield centrifugal spinning process known as Forcespinning®. The effects of varying concentrations of OM and CA on fiber diameter and molecular crosslinking were investigated. The morphological and thermo-physical properties, as well as water absorption of the developed nanofiber-based mats were characterized using microscopical analysis, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In vitro anti cancer studies were conducted with HCT116 colorectal cancer …

Wave Energy Converters With Rigid Hull Encapsulation: A Review, Mahmodul Hasan Maheen, Yingchen Yang

Mechanical Engineering Faculty Publications

Highlights

• WECs with rigid hull encapsulation are water-tight and robust.

• Diverse internally embedded power take-off designs are summarized.

• Various mechanisms and strategies for frequency tuning are formulated.

• Typical WEC testing methods are discussed.

• Some future research considerations are suggested.

Abstract

Ocean wave energy has a great potential in mitigating energy and sustainability crises of the 21st century. The lack of mature and cost-competitive wave energy converter (WEC) technologies, however, has become a major roadblock for WEC products entering the marketplace. A harsh ocean environment, which includes extreme waves, strong biological activities, and chemical transformations, adds to the maintenance cost and …

Introduction To Data-Driven Systems For Plastics And Composites Manufacturing, Saeed Farahani, Srikanth Pilla, Yun Zhang, Fausto Tucci

Mechanical Engineering Faculty Publications

Applications of high-performance plastics and composites have widely been expanded to various industries due to their superior properties, such as high strength-to-weight ratio, chemical resistance, and thermal/electrical insulation. However, the numerous possible combinations of polymers and reinforcements/fillers, the variability of these materials, and their complex manufacturing processes pose challenges in terms of efficiently developing new plastics and composites, accurately modeling their properties, and effectively monitoring and controlling their manufacturing processes. Integrating data-driven techniques, such as machine learning, artificial intelligence, and big data analytics, is a promising pathway to overcome these challenges as it is demonstrated by the state-of-the-art research works …

A Deep-Learning Framework For Spray Pattern Segmentation And Estimation In Agricultural Spraying Systems, Praneel Acharya, Travis Burgers, Kim-Doang Nguyen

Mechanical Engineering Faculty Publications

This work focuses on leveraging deep learning for agricultural applications, especially for spray pattern segmentation and spray cone angle estimation. These two characteristics are important to understanding the sprayer system such as nozzles used in agriculture. The core of this work includes three deep-learning convolution-based models. These models are trained and their performances are compared. After the best model is selected based on its performance, it is used for spray region segmentation and spray cone angle estimation. The output from the selected model provides a binary image representing the spray region. This binary image is further processed using image processing …

Effectiveness Of Rans In Predicting Indoor Airborne Viral Transmission: A Critical Evaluation Against Les, K. Choudhary, K. A. Krishnaprasad, S. Pandey, ‪Nadim Zgheib, J. S. Salinas, M. Y. Ha, S. Balachandar

Mechanical Engineering Faculty Publications

We investigate the dispersal of droplet nuclei inside a canonical room of size 10 × 10 × 3 . 2 m 3 with a four-way cassette air-conditioning unit placed at the center of the ceiling. We use Reynolds averaged Navier–Stokes (RANS) simulations with three flow rates corresponding to air changes per hour (ACH) values of 2.5, 5, and 10. The room setup as well as the operating conditions are chosen to match those of a recent high-fidelity large eddy simulation (LES) study. We use statistical overloading with a total of one million droplet nuclei being initially distributed randomly with uniform …

Hybrid Fes-Exoskeleton Control: Using Mpc To Distribute Actuation For Elbow And Wrist Movements, Nathan Dunkelberger, Jeffrey Berning, Eric M. Schearer, Marcia K. O'Malley

Mechanical Engineering Faculty Publications

Introduction: Individuals who have suffered a cervical spinal cord injury prioritize the recovery of upper limb function for completing activities of daily living. Hybrid FES-exoskeleton systems have the potential to assist this population by providing a portable, powered, and wearable device; however, realization of this combination of technologies has been challenging. In particular, it has been difficult to show generalizability across motions, and to define optimal distribution of actuation, given the complex nature of the combined dynamic system. Methods: In this paper, we present a hybrid controller using a model predictive control (MPC) formulation that combines the actuation of both …

Feasibility Analysis Of A Wave Powered Autonomous Underwater Vehicle, Yingchen Yang, Erick Martinez

Mechanical Engineering Faculty Publications

An autonomous underwater vehicle (AUV) powered by renewable energy would enable it to extend endurance and forward presence with no logistics tail for fuel. A wave powered concept AUV is proposed and analyzed for this purpose. The AUV is in a torpedo shape and employs a fully hull-encapsulated mass-spring-damper system as its power take-off (PTO) unit. While in the recharging mode, the AUV surfaces and converts wave energy for electricity. Considering the AUV of a common size, our analysis indicates that resonance of the AUV and/or its PTO, to be excited by ocean waves, becomes impossible in typical ocean conditions. …

Recent Advances In Centrifugal Spinning And Their Applications In Tissue Engineering, Shaik Merkatur Hakim Marjuban, Musfira Rahman, Syeda Sharmin Duza, Mohammad Boshir Ahmed, Dinesh K. Patel, Md Saifur Rahman, Karen Lozano

Mechanical Engineering Faculty Publications

Over the last decade, researchers have investigated the potential of nano and microfiber scaffolds to promote wound healing, tissue regeneration, and skin protection. The centrifugal spinning technique is favored over others due to its relatively straightforward mechanism for producing large quantities of fiber. Many polymeric materials have yet to be investigated in search of those with multifunctional properties that would make them attractive in tissue applications. This literature presents the fundamental process of fiber generation, and the effects of fabrication parameters (machine, solution) on the morphologies such as fiber diameter, distribution, alignment, porous features, and mechanical properties. Additionally, a brief …

Adsorption Of Methylene Blue On Papaya Bark Fiber: Equilibrium, Isotherm And Kinetic Perspectives, Sumaya Tarannum Nipa, Nawrin Rahman Shefa, Shahanaz Parvin, Most Afroza Khatun, Md Jahangir Alam, Sujan Chowdhury, M. Azizur R. Khan, Sk Md Ali Zaker Shawon, Biplob K. Biswas, Md. Wasikur Rahman

Mechanical Engineering Faculty Publications

Rapid population growth and industrial expansion lead us to be habitat of a polluted planet. One of the major pollutants that badly affect the ecosystem being organic dyes released from various chemical industries where cleaner production concept is straightway adopted. Papaya (Carica papaya) bark fiber (PBF) is a natural product used for Methylene Blue (MB) dye removal as a cost–effective adsorbent from aqueous solution by batch method. Several parameters as the effect of pH, initial dye concentration, contact time, and adsorbent dosage were studied and optimized for maximum dye recovery. Reaction kinetics of the process and Langmuir and Freundlich adsorption …

Automatic Dispersion, Defect, Curing, And Thermal Characteristics Determination Of Polymer Composites Using Micro-Scale Infrared Thermography And Machine Learning Algorithm, Md Ashiqur Rahman, Mirza Masfiqur Rahman, Ali Ashraf

Mechanical Engineering Faculty Publications

Infrared thermography is a non-destructive technique that can be exploited in many fields including polymer composite investigation. Based on emissivity and thermal diffusivity variation; components, defects, and curing state of the composite can be identified. However, manual processing of thermal images that may contain significant artifacts, is prone to erroneous component and property determination. In this study, thermal images of different graphite/graphene-based polymer composites fabricated by hand, planetary, and batch mixing techniques were analyzed through an automatic machine learning model. Filler size, shape, and location can be identified in polymer composites and thus, the dispersion of different samples was quantified …

Estimation Of The Response, Power Spectra, And Whirling Patterns Generated From Mud Circulating Along The Annulus During Drilling Procedures: An Alternative Mathematical Representation Via Finite Element Modelling, Eleazar Marquez

Mechanical Engineering Faculty Publications

In this study, an alternative mathematical representation of a drill-string is proposed to provide an alternative assessment on BHA dynamic alterations. Lateral vibrations remain the focal point of drill-string breakdowns given their high frequency characterization and ability to deviate perforation trajectories from the subsurface target. In this paper, the proposed model consists of an anisotropic rotor subjected to distinct RPMs, an axial force, and a bidirectional harmonic excitation with specified amplitude and assorted duration to simulate annulus motion generated from the mud fluid. In this regard, Euler-Bernoulli beam theory was adopted to establish a complete MDOF mathematical expression and thus …

Development Of An Improved Mathematical Representation Which Captures The Nonlinear Dynamic Behavior Of A Drill-String Assembly, Eleazar Marquez

Mechanical Engineering Faculty Publications

In this study, an improved mathematical representation of a drill-string assembly is developed to provide an alternative assessment on vibration irregularities proliferating downhole due to bit-rock interference. Lateral vibrations receive particular attention due to their high frequency content which alter the dynamic response of the drill-string, instigate casing damage, and impede optimal penetration rates. The response of the drill-string is captured by synthesizing compatible stationary bit excitations, via an auto-regressive digital filter, and implementing Monte Carlo simulation, while the power spectral density function is approximated to elucidate the dynamic characteristics during drilling. Formulating adequate physical parameters for the equation of …

A Probabilistic Analysis In Vibration-Assisted Drilling To Measure Dynamic Behavior During Drilling And Understand Risk Factors, Eleazar Marquez, Samuel Garcia

Mechanical Engineering Faculty Publications

In this paper, a mathematical representation is proposed to further understand the dynamic behavior and risk factors associated with vibration-assisted drilling (VAD) technology. The proposed Timoshenko beam model, which characterizes VAD technology, consists of two passive, counter-rotating coaxial rotors operating simultaneously, subjected to a stochastic excitation. In this regard, a finite element technique was incorporated to determine the physical parameters of the governing equation of motion, where the shear and rotary effects, as well as the gyroscopic couples generated perpendicular to the axis of rotation, were accounted for. Further, the relative velocity between the coaxial rotors was accounted in the …

Quadcopter Control Using Single Network Adaptive Critics, Alberto Velazquez, Lei Xu, Tohid Sardarmehni

Mechanical Engineering Faculty Publications

In this paper, optimal tracking control is found for an inputaffine nonlinear quadcopter using Single Network Adaptive Critics (SNAC). The quadcopter dynamics consists of twelve states and four controls. The states are defined using two related reference frames: the earth frame, which describes the position and angles, and the body frame, which describes the linear and angular velocities. The quadcopter has six outputs and four controls, so it is an underactuated nonlinear system. The optimal control for the system is derived by solving a discrete-time recursive Hamilton-Jacobi-Bellman equation using a linear in-parameter neural network. The neural network is trained to …

Non-Destructive Infrared Thermographic Curing Analysis Of Polymer Composites, Md Ashiqur Rahman, Javier Becerril, Dipannita Ghosh, Nazmul Islam, Ali Ashraf

Mechanical Engineering Faculty Publications

Infrared (IR) thermography is a non-contact method of measuring temperature that analyzes the infrared radiation emitted by an object. Properties of polymer composites are heavily influenced by the filler material, filler size, and filler dispersion, and thus thermographic analysis can be a useful tool to determine the curing and filler dispersion. In this study, we investigated the curing mechanisms of polymer composites at the microscale by capturing real-time temperature using an IR Thermal Camera. Silicone polymers with fillers of Graphene, Graphite powder, Graphite flake, and Molybdenum disulfide (MoS₂) were subsequently poured into a customized 3D printed mold for …

Sagittal Plane Dynamic Model Using Tibiofemoral Articular Geometric Center And Experimental Tibiofemoral Center Of Rotation To Predict Joint Forces During Knee Extension Exercise, Jose Mario Salinas, Dumitru I. Caruntu

Mechanical Engineering Faculty Publications

A 2-dimensional anatomical dynamic model of the patellofemoral joint was developed for investigating the forces that contribute to patellar motion during the knee extension exercise. Sagittal bone profiles were aligned to kinematic experimental data to simulate bone motion. Kinematic experimental data was collected using VICON motion analysis system. Marker coordinate data was used to set body-fixed coordinate systems on femur and tibia. These body-fixed coordinate systems were used to drive the femur and tibia geometric profiles during the knee extension exercise. Kinematic experimental data was used to calculate the relative instant center of rotation of markers on tibia with respect …

Sensitivity Of Puff Dynamics And Airborne Droplet Nuclei Distribution To Variations In Violent Expiration Events, M. Allahyari, K. Liu (刘凯), J. Salinas, ‪Nadim Zgheib, S. Balachandar

Mechanical Engineering Faculty Publications

We use large eddy simulations to investigate the puff and droplet dynamics from violent expiratory events such as coughs and sneezes in the first few seconds following an ejection. For each of the eleven simulations considered, over 60,000 droplets are ejected and individually tracked using the point-particle Euler–Lagrange approach. We test the sensitivity of the puff and droplet dynamics to various parameters including the ejection volume, momentum, and orientation. We also explore the effect of the mouth shape on the aforementioned dynamics by considering elliptical and circular inlet cross-sections. The results from the simulations compare favorably with a recent theoretical …

Fluid Mechanics Of Air Recycling And Filtration For Indoor Airborne Transmission, K. A. Krishnaprasad, J. S. Salinas, ‪Nadim Zgheib, S. Balachandar

Mechanical Engineering Faculty Publications

We present a statistical framework to account for effects of recycling and filtration in ventilation systems for the estimation of airborne droplet nuclei concentration in indoor spaces. We demonstrate the framework in a canonical room with a four-way cassette air-conditioning system. The flow field within the room is computed using large eddy simulations for varying values of air changes per hour, and statistical overloading is used for droplet nuclei, which are tracked with a Langevin model accounting for sub-grid turbulence. A key element is to break up the path that a virus-laden droplet nucleus can take from the time it …

Coaxial Jets With Disparate Viscosity: Mixing And Laminarization Characteristics, Mustafa Usta, M. R. C. Ahmad, G. Pathikonda, I. Khan, P. Gillis, D. Ranjan, C. K. Aidun

Mechanical Engineering Faculty Publications

Mixing of fluids in a coaxial jet is studied under four distinct viscosity ratios, m = 1, 10, 20 and 40, using highly resolved large-eddy simulations (LES), particle image velocimetry and planar laser-induced fluorescence. The accuracy of predictions is tested against data obtained by the simultaneous experimental measurements of velocity and concentration fields. For the highest and lowest viscosity ratios, standard RANS models with unclosed terms pertaining to viscosity variations are employed. We show that the standard Reynolds-averaged Navier-Stokes (RANS) approach with no explicit modelling for variable-viscosity terms is not applicable whereas dynamic LES models provide high-quality agreement with the …

Evaluating The Sustainability Of Paper And Plastic Substitute Material Limex, E.-Lexus Thornton, Avery Hartley, Daniel Caudill, Martin Gamesu, Julius M. Schoop, Fazleena Badurdeen

Mechanical Engineering Faculty Publications

With the increasing decline in the environment and natural resources it is important to find new ways in which manufacturing can increase the sustainability of the world. This study seeks to compare LimeX, a state-of-the-art paper and plastic alternative primarily made of limestone, with conventional paper and plastic materials. For a better understanding of LimeX as a material, a brief investigation of the mechanical and chemical properties will be performed through experimentation and analysis. In addition, this paper aims to evaluate the sustainability of LimeX through the analysis of metrics relating to the triple bottom line (environmental impacts, economic impacts …

Data-Driven Dynamic Motion Planning For Practical Fes-Controlled Reaching Motions In Spinal Cord Injury, Derek N.N. Wolf, Antonie J. Van Den Bogert, Eric M. Schearer

Mechanical Engineering Faculty Publications

Functional electrical stimulation (FES) is a promising technology for restoring reaching motions to individuals with upper-limb paralysis caused by a spinal cord injury (SCI). However, the limited muscle capabilities of an individual with SCI have made achieving FES-driven reaching difficult. We developed a novel trajectory optimization method that used experimentally measured muscle capability data to find feasible reaching trajectories. In a simulation based on a real-life individual with SCI, we compared our method to attempting to follow naive direct-to-target paths. We tested our trajectory planner with three control structures that are commonly used in applied FES: feedback, feedforward-feedback, and model …

Harnessing The Potential Of Fibrous Polyester Composites Meant For Bioactive Medical Devices, Graciela Morales, Heriberto Rodríguez-Tobías, Victoria Padilla-Gainza, Karen Lozano, Daniel Grande

Mechanical Engineering Faculty Publications

Fibrous-based composite polyester mats have gained importance in the biomedical area due to their morphological characteristics and mechanical performance. These materials can be modified by incorporating different inorganic micro- or nano-particles, thus leading to promising potential applications as medical devices with antimicrobial and/or bioactive properties. In this regard, this chapter reports a compilation of different studies related to the development of sub-micron fibers based on two important polyesters for biomedical use, namely poly(3-hydroxybutyrate) and poly(lactic acid). Studies focus on fibers developed through hydrodynamic techniques, namely electrospinning, electrospraying, and centrifugal spinning. The incorporation of zinc oxide or hydroxyapatite on the polyester-based …

Bio-Inspired Micromachined Volumetric Flow Sensor With A Big Dynamic Range For Intravenous Systems, Lansheng Zhang, Yingchen Yang, Georgios A. Bertos, Chang Liu, Huan Hu

Mechanical Engineering Faculty Publications

Real-time monitoring of drug delivery in an intravenous infusion system can prevent injury caused by improper drug doses. As the medicine must be administered into the vein at different rates and doses in different people, an ideal intravenous infusion system requires both a low flow rate and large dynamic range monitoring. In this study, a bio-inspired and micromachined volumetric flow sensor is presented for the biomedical application of an intravenous system. This was realized by integrating two sensing units with different sensitivities on one silicon die to achieve a large dynamic range of the volumetric flow rate. The sensor was …

Development And Characterization Of Forcespinning® Mesquite Gum Nanofibers, Cristobal Rodriguez, Victoria Padilla, Karen Lozano, Alexa Villarreal, Luis A. Materon, Robert Gilkerson

Mechanical Engineering Faculty Publications

In this study, nanofibers incorporating Prosopis glandulosa mesquite gum (MG) exudate combined with biodegradable polymers, pullulan (PL) and chitosan (CH), were produced via the Forcespinning® technique. The nonwoven composite membranes were characterized via scanning electron microscopy followed by thermogravimetric and Fourier-transform infrared spectroscopy analysis. MG nanofiber composites comprised long, continuous fibers with an average fiber diameter of 523 ± 180 nm and 760 ± 225 nm for 18.1 and 28 wt% of MG, respectively. These composite membranes were water-stable after crosslinking via heat treatment with a ∼3 % water absorption capacity, and demonstrated a thermal capability with an increasing …

Review Of Vegetable Nanolubricants For Tribological Applications, Laura Peña-Parás, Martha Rodríguez-Villalobos, Demófilo Maldonado-Cortés, José Andrés González, Ricardo De Jesús Durán, Javier A. Ortega

Mechanical Engineering Faculty Publications

About 40 million tons of lubricants are used every year for various industry purposes and applications, where most of them are petroleum based oils. These oils are difficult and expensive to dispose of, have low biodegradability and are contamination risks. Recent efforts have been focused on reducing the environmental impact of petroleum based lubricants through the use of vegetable oils since they are biodegradable and have good lubricity. A drawback of vegetable oils is their poor thermal stability and oxidation, which causes them to decrease their properties at higher loads. Nanoparticle (NP) additives have been explored for improving the tribological …