Mechanical Engineering Commons^™

Interactive Lego Girl Scout Arm, Chris Suzuki, Emi Okuyama, Bryson Shores, Karina Sandoval

Mechanical Engineering

This Senior Project Report document outlines the senior design project for Girl Scouts of California’s Central Coast (GSCCC) led by a team of four Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The project encompasses the researching, designing, prototyping, and testing of a LEGO robotic arm for the Girl Scouts to learn more about STEM (Science, Technology, Engineering, and Mathematics) and provide support to each Girl Scouts cookie sales in their stores. Their goal was to build a LEGO robotic arm that will interact with customers at the Girl Scout stores and promote the girl scouts' interest …

Baja Bug Suspension, James Ankers, Rebecca Hansen, Dakota Robert Hollingsworth, Thomas Alfred Spycher

Mechanical Engineering

The goal of this senior project was to design and build a long travel front suspension system for a VW Bug. This started by defining the scope of the project and performing preliminary research. In this step, similar products were investigated, and research was done on stakeholders and customers. Next, concept development, design, and evaluation were performed. With this, the first iteration of our CAD model was designed, and physical prototypes were made. Using all this information, and feedback from advisors and sponsors, multiple iterations of our CAD were performed until the design was ready to manufacture. Drawings were taken …

B.A.C.O.N. (Battery-Powered Autonomous Cart Conversion) Autonomous Vehicle Design, Robyn C. Ribet, Damond Li, Tanner Hillman, Christopher Or

Mechanical Engineering

The goal of our project is to convert an electric go cart into an autonomous testing platform. We must enable autonomous braking, steering, and acceleration with electro-mechanical systems. We began the project with ideation to create our initial design and have since received ample feedback from faculty, students, and our sponsor. With this feedback we were able to refine our preliminary ideas and produce a detailed design supported with ample analysis, research, and external advice. We have developed our project in four main subsystems: Steering, braking, acceleration, and emergency braking. Following, we procured, manufactured, and assembled all of our designed …

Brush Clearing Tool -- Trimmer Assembly, Juan Martinez, Jayson Reyes Salvador, Paula X. Ortiz-Arango

Mechanical Engineering

The Final Design Review (FDR), this report, encompasses the work done by three Cal Poly Mechanical Engineering seniors along with two other teams of four (members each) for Brian Rois-Mendez. Originally, Dr. Mendez presented his idea to clear overgrown brush along trails. Our main purpose was to eliminate the drawbacks of his prototype and improve where we saw fit. For our team specifically, to reduce the workload of clearing brush, we focused on designing a seamless vertical and horizontal adjustment as well as increasing the trimmer’s cutting power. This report will cover the details of said evolutions.

Since the Critical …

Offshore Wind Turbine Gearbox, Michael Cooper, Ernesto Portillo, Kyle Hammer, Carson Bryan

Mechanical Engineering

New offshore wind turbine farms are currently in development on the East Coast and off California’s Central Coast. Preliminary design considerations from mechanical and civil engineers are needed to ensure constructability of these deep-water, floating-platform wind farms, which will then be connected to the power grid at the grid ties of Morro Bay and Diablo Canyon. The purpose of this project is to design an epicyclic gearbox fit to take in the torque loads from the slowly rotating rotor shaft and successfully output a significantly faster rotating motor shaft to allow more accessibility to generator options including ones with far …

Galilean Cannon, Mariah Kirkham, Marcus Beloney, Jonas Honeyman, Joshua Pratt

Mechanical Engineering

This comprehensive report details our team’s senior capstone design project, which involved the design, construction, and installation of a Galilean Cannon exhibit—a linear momentum experiment involving rebounding balls—for the San Luis Obispo Children’s Museum.

This report is split into four parts, as follows. Part One describes the needs of our sponsor and target market, as well as background research on the concept. Part Two details the ideation, decision making, and proofing process leading to our Preliminary Design concept. Part Three discusses the preliminary analysis and plans for the final prototype. Part Four describes construction and testing of the operational exhibit …

Tholos - Eva Sample Location Calibration Device, James Verheyden, Kat Gipson, Julia Rios, Ben Trust

Mechanical Engineering

To support NASA’s upcoming Artemis missions, an extravehicular activity (EVA) photometric calibration scale was developed to replace the Apollo-era Gnomon device. The Gnomon was a gimbaled stadia rod mounted on a tripod which provided color and reflectivity photo calibration, vertical orientation, and solar shadow direction, to include in photos of lunar geologic samples and features. With over 50 years of innovation since the first Gnomon deployment on Apollo 11, this redesign of the photometric calibration scale will support NASA’s missions in the modern day. The Tholos™, named after the ancient Greek repository of standardized measures, consists of a quadrupedal design …

Mechanized Theatre Turntable, Chloe Huiyi Chou, Ethan Lee Stroh, Ruodolf Reller Quelnat Rumbaoa, Davide Lanfranconi

Mechanical Engineering

This project aimed to create a remote-control and drive system for a theatrical turntable that was constructed by the Theatre and Dance Department of California Polytechnic State University, San Luis Obispo. Over the course of three quarters, the team successfully designed and manufactured a working verification prototype. This verification prototype was then tested, and the project sponsor verified that it met all specifications. The current iteration of the verification prototype can support up to a load of 1400 lbf, rotate a 12 ft diameter turntable clockwise and counterclockwise with a speed range of 1 to 4 rpm, and is able …

Multifamily Complex Smart Locks For Property Management And Tenant Security, April Mills, Allen Chen, Dana Kumamoto, Michael Cook

Mechanical Engineering

Maintaining and managing hundreds of locks and physical keys for an apartment complex can be time consuming and costly, especially when the apartments turn over to new tenants. Our goal was to develop a smart door lock that is compatible with Obodo’s management app for apartment complexes to make accessing apartments secure and simpler for tenants and easier to manage for owners.

We designed and manufactured one smart door lock that is powered with four AA batteries and utilizes a dynamic NFC device and Bluetooth technology. The board can enter a sleep mode which reduces power consumption. The dynamic NFC …

Polygait Conveyor Upgrade, William J. Schafer, Carolyn E. Palmer, Carly A. Tudor, Bryan C. Cordutsky

Mechanical Engineering

The PolyGAIT Conveyor Upgrade Mechanical Engineering Senior Project consisted of the complete design process to construct an operational “smart” control system for the conveyor belt loop on Cal Poly’s campus. As requested by project sponsor Dr. Tali Freed, an Industrial & Manufacturing Engineering professor at Cal Poly, the control system requirements included connecting existing conveyor components together, such as Radio Frequency Identification (RFID) reader tunnels, photo eye motion sensors, motor powered rollers, and diverting elastic bands. The main design problem is when packages with RFID tags are moving at industry high speed (10 ft/s) they are occasionally not scanned by …

Demonstration Triple Spool Turbine And Controls, Synnovea Alaina Wood, Marco Eston Salguero, Michael Bruce Megna, Wyatt Scott Conner

Mechanical Engineering

The demonstration triple-spool turbine and controls project consisted of the conceptualization, design, analysis, build, and test of a demonstration model of three concentric driveshafts, such as those used in conventional turbofan (or power generation turbine) engines. Specifically, our team focused on building a basic, portable, mechanical model of such a driveshaft assembly, while also developing the backend firmware/control and user interface software used to control it. This model was developed with the initial intent of use in the Cal Poly engines lab with a goal of remotely controlling the motors driving the driveshaft model by means of a USB cable …

Flow Data Acquisition System, Samuel Chapman Maxwell Iv, Nathaniel Peter Werdmuller Von Elgg, Jameson Robert Spitz, Jason Jia-Shing Hu

Mechanical Engineering

Data acquisition is an essential part of the research and development process of water valves and fittings at Zurn Wilkins. In Fall 2021, Zurn Wilkins approached our senior project team with a goal of creating a modular data acquisition system that streamlines their design and testing processes for new products. Our team determined that a microcontroller-based system was the optimal way to deliver this goal and designed our system around a Raspberry Pi. We chose twelve sensors that were compatible with existing taps in the Zurn Wilkins facility. The sensors send their signal through waterproof receptacles into the Polycase waterproof …

Bike To The Future, Wanjiku Gichigi, Luisa Shu Yi Chiu, Alexander Kalman Dunn, Georgia Ann Holmes

Mechanical Engineering

Brian Higgins is a veteran with retinitis pigmentosa who enjoys biking. The motivation for this project was to design and manufacture a refined prototype of a bike attachment to assist Brian in safely biking to and from work. The customer needs, problem definition, background, design development, final design, testing, costs, and recommendations are provided in this report.

The solution for this project, as laid out in the design development section, was to design an assembly that would detect objects in the biker’s path and relays that information to them. The design incorporated a dashboard to conceal components within, protect them …

Kinetic Energy Harvesting Device For Long Distance Thru-Hikers, Jarod Reece Lyles, Ryan William Mclaughlin, Shaw Hawkeye Hughes, David Hernandez

Mechanical Engineering

The intent of this project was to design and build a device capable of harnessing biomechanical energy from a thru-hiker to charge electronic devices. To begin, we ruled out any potential solutions that could be intrusive to the hiking experience, limiting us to a device that could be placed in a backpack.

After defining the scope of the project, we ideated upon potential designs, and chose to move forward with a rotational generator based design. Detailed analysis included both system dynamics and vibrations based models, and from this analysis we developed a mechanical design in SOLIDWORKS®️ and a custom printed …

Barker Bird Animatronic Senior Project Report, Marcus Monroe, Nolan Clapp, Ishan Jandaur, Jonathan Ogden

Mechanical Engineering

This document describes how our F71 Senior Design Project team developed a 3D printed, electronic bird that mimics Disneyland’s first animatronic, the Barker Bird. An animatronic is a mechanical puppet that replicates real life movement with robotic parts. Disney’s Barker Bird is a well-known animatronic that replicates a talking macaw with multiple moving systems. The final prototype completed by our team serves as a teaching tool for CAPED (Cal Poly Amusement Park Engineers and Designers) club members that are interested in the field of animated robots.

Wave Goodbye To Salt, Andy Wu, Amanda Olla, Solie Grantham, Charlie Sinclair

Mechanical Engineering

Our team of Cal Poly Mechanical Engineers ideated, designed, built, and tested a system to help combat the growing problem of widespread drought in coastal and island communities. We developed a proof-of-concept model of a wave powered, mechanical system to desalinate ocean water using a reverse osmosis process. From topical research, it was found that there are many ways to harness a portion of the huge amount of energy that the ocean provides. While large scale ocean water desalination plants are already in operation, smaller scale desalination units powered by ocean waves are largely underdeveloped. Our relatively small and inexpensive …

Heating Lanyard To Warm Body Core, Cole Bunker, Spencer Alonge, Tyler Elsom, Matthew Hyland

Mechanical Engineering

Calculated Industries, a company that specializes in construction products headquartered in Carson City, Nevada, has sponsored the Heating Lanyard to Warm Body Core senior project. The objective of the project was to design and manufacture a body core heating device that will be used by construction workers to keep warm in cold environments. The goal is to create a device that is safe, comfortable, and temperature controllable. Our team consists of four mechanical engineering students at California Polytechnic State University, San Luis Obispo. Research was performed to analyze current products in the market, analyze how to best provide heat to …

Insulated Solar Electric Cooker With Phase Change Materials, Weijun Zhao, Jake Lung, Owen Chu, Sarah Melzer

Mechanical Engineering

This Senior Project Report documents the development and design process of the Insulated Solar Electric Cooker with a Phase Change Material (ISEC w/ PCM). In this project, we developed a PCM assembly that can be integrated into an existing ISEC system which utilizes two 100 W solar panels. This report details the use of a nitrate salt solution of 60% NaNO3 and 40% KNO3 and demonstrates its potential as a viable form of thermal storage solution for cooking. We found that only 1kg of PCM is able to retain its heat for around 5 hours after power removal and believe …

Insulated Solar Electric Cooker With Solid Thermal Storage, Eric M. Cortes, Andy M. Mccombs, Dominick Trageser, Nami Suzuki

Mechanical Engineering

This Senior Project report outlines the design for our senior project under the Mechanical Engineering department of California Polytechnic State University. Insulated solar electric cookers (ISEC) are a relatively novel and exciting solution to the ethical, environmental, and medical issues associated with the conventional cooking methods - burning of biomass and charcoal - practiced in nonindustrial countries around the world. ISECs use solar energy input from a solar panel to cook food within an insulated chamber and have been researched and developed by Dr. Peter Schartz and his research group over the past several years. However, our target users expressed …

Shallow-Water Wind Turbine Foundation, Andrew Walker, Nico Nani, James Cusanelli, Zachary Dunkelberger

Mechanical Engineering

Over the 2021-2022 academic year, we, the Shallow Water Wind Turbine Foundation senior project team, designed, manufactured, and tested a fixed bottom, sand mounted turbine foundation for the Cal Poly Wind Power Club’s Collegiate Wind Competition turbine. The foundation was restricted to certain material, installation, and geometric constraints outlined in this report, and needed to support the turbine under operating conditions including 22 m/s wind speeds. The design was analyzed using primarily a bearing capacity geotechnical analysis to determine final geometry and weight. The foundation was then manufactured using welded, custom carbon steel parts.

The foundation was inspected for geometric …

Brush Clearing Trimming Device: Drivetrain, Dallas Russell, Nathan Small, Alex Imbery, Jordan Aguana

Mechanical Engineering

We, the “DT Inc.” team, have been tasked with the redesign of the drivetrain of an electric brush clearing tool created for trail and roadside use. We started the design process by doing research on the currently available products and determining their strengths and shortcomings. We also tested the prototype given to us by our sponsor, and listened to our sponsor about what he liked about his design and what he wanted changed. We resolved from this research that the most important improvements that we needed to make were to improve the traction, reduce the speed and increase the torque, …

Baker/Koob Final Report: Solar Solution For Mini Mars Rover, Jonathan Cederquist, Cole Korchek, Derick Louie, Michaella Ochotorena, Collin Petersen

Mechanical Engineering

This project focused on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Cal Poly Fluid Power Vehicle Challenge 2022, Sangmin Sung, Eddy Rodriguez, Travis Welch, Jeremy Baechler, Kevin Pauls

Mechanical Engineering

In this report, the Featherweight Cycles design team puts forth the scope and overview of their design project, discusses background research and competitor analysis, and presents the project’s final design and manufacturing plans. The overall goal of this project is to fabricate and compete in the Fluid Power Vehicle Challenge, hosted by the National Fluid Power Association. To better define the design process, the team researched previous year’s designs from Cal Poly, as well as winning designs from the last two years to form a baseline of knowledge about competing schools’ designs. After researching multiple design paths, Featherweight Cycles chose …

Utilization Of Resin-Based Additive Manufacturing For Investment Casting, Matthew Frost, Isaiah Hong

Mechanical Engineering

Dr. Xuan Wang, an Industrial & Manufacturing Engineering (IME) professor at California Polytechnic State University, San Luis Obispo, has sponsored the resin-based 3D printing investment cast senior project. The objective of the project was to thoroughly research the process and document the findings of using a resin-based 3D printed part as the pattern for investment casting. While this manufacturing process is not necessarily a new idea, the lack of technical research and documentation limits its ability to be reproducible. The research portion of the senior project included analyzing the limitations to the printing/casting manufacturing process. Measurements of part thicknesses, hole …

Mechanical Horse Project, Hernan Ramirez Resendiz, Ben Apt

Mechanical Engineering

This document outlines our senior design project for the Cal Poly Mechanical Engineering Department on behalf of Jack’s Helping Hand. As a team of two Mechanical Engineering students, we developed a structure that can support a rider and can move in three degrees of freedom to model the gait patterns of a horse. This senior project will be continued by another group that will focus on electronics and implement the motors that will induce motion on the structure that our team has built. We collected baseline data by attaching an iPhone to a horse and used that motion to compare …

Baja Sae Semi-Active Suspension, Philip Pang, Stassa Cappos, Harrison Hirsch, John Deboer

Mechanical Engineering

This Final Design Review (FDR) Report outlines the senior design project of the Baja SAE Semi-Active Suspension group, which includes mechanical and electrical engineering students at California Polytechnic State University San Luis Obispo. This document compiles the Baja SAE Semi-Active Suspension senior project team’s research and development of a semi-active suspension system for the Cal Poly Racing Baja SAE racecar. The goal is to design a system that adjusts the damping constant of the racecar’s spring-damper suspension while the vehicle is being driven in order to improve vehicle dynamics and driver comfort. None of the semi-active dampers that exist on …

The Performance Response Of A Heat Pipe Evacuated Tube Solar Collector Using Mgo/Mwcnt Hybrid Nanofluid As A Working Fluid, Ahmed A. Abdel-Rehim, Shady Henein

Mechanical Engineering

Utilizing a hybrid nanofluid is a promising solution for enhancing the thermal performance of the solar collector in a sustainable manner. In the present work, the effect of using magnesium oxide/multi-walled carbon nanotubes (MgO/MWCNT) hybrid nanofluid on the thermal performance of the evacuated tube solar collector is experimentally investigated. Four different weight ratios of (80:20), (70:30), (60:40), and (50:50) are used for a hybrid of MgO with MWCNTs in a water base, respectively. The experiments are performed at a 0.02% particle concentration and at various volume flow rates ranging from 1 to 3 L/min. The results show an enhancement in …

Responses Of An Axially Rotated Tube Versus Twisted Tube Design As Two Solutions To Enhance The Thermal Performance Under A Non-Uniform Heat Flux Condition: A Numerical Study, Andrew S. Tanious, Ahmed A. Abdel-Rehim, Ahmed A. Attia

Mechanical Engineering

Enhancement of heat transfer in tubes exposed to non-uniform heat flux applications is a key factor in increasing such applications' efficiency.

In the present study, heat transfer in an axially rotating pipe with concentrated heat flux at the lower section of the pipe is numerically investigated and compared to the twisting technique in such applications. The effects of pipe’s length (1, 2, and 3 m) and rotation rate (N = 0–10.5), which is the ratio between the rotational and axial Reynold’s numbers, are studied numerically using ANSYS Fluent while the effect of the twist ratio (S = 0.1–1m) is studied …

Gaylord Produce Removal Machine, Marcus Takashi Hirose Lee, Jacob Michael Perlman, Carissa Abigail Kamm, Mark Misao Loera

Mechanical Engineering

This Final Design Review Report outlines the senior design project that began Winter Quarter of 2021 at California Polytechnic State University. Our team consists of three mechanical engineers and a general engineer, working together to design, build, and test a product for Alameda County Food Bank. The goal of the final product is to relieve volunteers and employees of tedious manual labor and increase efficiency during the removal of produce from large Gaylord containers. This document describes background research, the objectives of the project, chosen concept design, analysis and initial prototyping of said concept, the final design, and verification prototype …

Automated Mini-Tubular Ceramic Production, Hunter Brooks, Daniel Freeman, Leo Taranta-Slack

Mechanical Engineering

Researchers at Lawrence Livermore National Laboratory need a way to increase the rate of manufacturing of mini-tubular ceramics to be used in testing particulate air filters. This document outlines our process from researching and writing an initial scope of work all the way to fabricating and testing a final prototype. This journey takes us through the background research, ideation process and selection of a final design. We also detail the desired engineering specifications and our concept selection process. We dedicate a significant portion of this report to discussion of our final design. We delve into how it was manufactured as …