Mechanical Engineering Commons^™

A Conceptual Design Tool For Engineers: An Amalgamation Of Theory Of Constraints, Theory Of Inventive Problem Solving And Logic, Stephen R. Luke

Mechanical & Aerospace Engineering Theses & Dissertations

This research creates a design methodology by synthesizing three different design tools, the Theory of Inventive Problem Solving (TRIZ), the Theory of Constraints (TOC) and Logic. The basic approach of this design method is to: (1) Reduce a design problem to a logic diagram, (2) Code the inputs and outputs to determine desirability and degree of control, (3) Identify the best inputs to manipulate in order to obtain the desired outputs and (4) Exploit innovative algorithms developed in TRIZ to find the best ways to manipulate the chosen inputs.

This research integrates and expands the methods of TRIZ and TOC. …

Investigation Of Port Fuel Injector Spray Mass Distribution By Laser Induced Fluorescence, Tuba Bayraktar

Mechanical & Aerospace Engineering Theses & Dissertations

Modern internal combustion engines have stringent requirements for performance and reduced toxic emissions. The fuel delivery system, and particularly the fuel injectors, have a vital role in reducing unburned hydrocarbons (HC) and carbon monoxide (CO) in exhaust emission.

The main goal of this study is to map the spatial and temporal distribution of the spray from a low-pressure gasoline fuel injector. To attain this goal, three tasks were performed: (1) the experimental investigation of the spray oscillation as functions of operating pressure and injector timing, (2) the determination of the appropriate dye/fuel combinations for one particular experimental technique, and (3) …

Modeling Aspects Of Magnetic Actuators And Magnetic Suspension Systems, V. Dale Bloodgood Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation is a study of new modeling techniques developed for magnetic suspension systems. The techniques discussed are modifications of magnetic circuit theory and fundamental eddy current models. The techniques are compared against experimental test results and finite element data. The information gained from the experimental testing is used to provide insight into magnetic bearing design.

A small-gap modeling technique called extended circuit theory is developed that incorporates information about the system gained from finite element data, or experimental data, to be included in the analytic model. The variations between the classical magnetic circuit model and the finite element model …

The Effect Of Temperature On The Optical Absorptive And Reflective Behavior Of Metals, Thomas A. Hunyady

Mechanical & Aerospace Engineering Theses & Dissertations

In the five decades since its invention, the laser has been used to commercially process materials in an increasingly diverse number of ways. The precise control over the delivery of the incident energy that is afforded by a laser allows for a wide variety of applications. All of these processes depend in some way on two important physical properties of the material being treated. These properties are known as the optical reflectivity and absorptivity of a material. The values of each of these properties are different for each material and are influenced by a number of factors, including surface roughness, …

Analysis Of A Direct Expansion Solar-Assisted Heat Pump Using Different Refrigerants, Francis Benjamin Gorozabel Chata

Mechanical & Aerospace Engineering Theses & Dissertations

A direct expansion solar-assisted heat pump, the components of which are properly matched for a specified ambient condition characterized by geographical location, has been analyzed. The steady state energy equation across the collector is solved for several refrigerants for two configurations; bare collector and one-cover collector. The REFPROP computer program, developed by the National Institute of Science and Technology, is used to predict refrigerant properties that are used in the steady state energy balance. The thermal performance as characterized by the coefficient of performance (COPn) is determined for a variety of refrigerants. A graphical procedure is developed for sizing of …

Generic Cost Estimation Framework For Design And Manufacturing Evaluation, Uday A. Kilkami

Mechanical & Aerospace Engineering Theses & Dissertations

A major drawback of current cost estimation models is their incapability of embracing effectively complete product development stage. Parametric estimation works well in early stages of design, but in detail design stage, a more complete estimation is provided by process model based and detail estimation techniques. A major paradigm shift is proposed in this work whereby ‘Cost’ is to be considered as a design parameter from scientific perspective, and it is to be treated as a design consequence rather than as an operational outcome. A comprehensive framework using System Analysis fundamentals is designed to study ‘Process Cost’ aspects of part …

External Aerodynamics Of Heavy Ground Vehicles: Computations And Wind Tunnel Testing, Ilhan Bayraktar

Mechanical & Aerospace Engineering Theses & Dissertations

Aerodynamic characteristics of a ground vehicle affect vehicle operation in many ways. Aerodynamic drag, lift and side forces have influence on fuel efficiency, vehicle top speed and acceleration performance. In addition, engine cooling, air conditioning, wind noise, visibility, stability and crosswind sensitivity are some other tasks for vehicle aerodynamics. All of these areas benefit from drag reduction and changing the lift force in favor of the operating conditions. This can be achieved by optimization of external body geometry and flow modification devices. Considering the latter, a thorough understanding of the airflow is a prerequisite.

The present study aims to simulate …

Supersonic Combustion And Mixing Characteristics Of Hydrocarbon Fuels In Screamjet Engines, Ahmed A. Taha

Mechanical & Aerospace Engineering Theses & Dissertations

The combustion characteristics of gaseous propane in supersonic airflow using the rearward-facing step that is swept inward from both end sides is studied. The effect of sweeping the step on the flow field features of propane combustion is investigated.

The study of the supersonic combustion of ethylene is carried out using different combustor configurations, different main fuel equivalence ratios, and different pilot fuel equivalence ratios.

The swept step shows the ability to hold the propane flame in the supersonic air stream without extinction. It was found that the side sweeping of the combustor exhibits the high temperature and combustion products …

Investigation Of Dual-Mode Combustion With Large Upstream Interaction, Melanic Olynciw-Mills

Mechanical & Aerospace Engineering Theses & Dissertations

Dual-mode scramjet combustor configuration with significant upstream interaction is investigated numerically. The possibility of scaling the domain to accelerate the convergence an3 reduce the computational time is explored. The supersonic combustor configuration was selected to provide an understanding of key features of upstream interaction and to identify physical and numerical issues relating to modeling of dual-mode configurations. The numerical analysis was performed with vitiated air at freestream Mach number of 2.5 using hydrogen as the sonic injectant. Results are presented for two-dimensional models and a three-dimensional jet-to-jet symmetric geometry. Comparisons are made with experimental results. Two-dimensional and three-dimensional results show …

Determination Of Life Cycle Cost Under Uncertainty, Hamoud R. Al-Otaibi

Mechanical & Aerospace Engineering Theses & Dissertations

The subject of this thesis is a Life Cycle Cost (LCC) model that takes into consideration the uncertainty of equipment failure rate and input data. The outcome of LCC depends on numerous estimates, forecasts, assumptions, and approximations of real-life data. Each of these factors has the potential to introduce error into the results. The study focuses upon the database generated for equipment failure rates data developed from historical database based on Weibull distribution parameters. The model provides a method to simulate real-world project life cycle.

Development And Testing Of A Cfd-Based Optimization System For Axially Symmetric Rocket Nozzles, John-Paul Shebalin

Mechanical & Aerospace Engineering Theses & Dissertations

A software system has been developed to optimize rocket nozzle shapes for maximizing their performance. It has been established in the literature that one can use computer-based optimization with the parabolized Navier-Stokes equations to optimize the dimensions of low Reynolds number rocket nozzles-micronozzles. The Nozzle Optimization System described herein uses the full Navier-Stokes equations to optimize any axially symmetric rocket nozzle for which a converged solution can be obtained.

Four nozzles are optimized using this system-conical and contoured micronozzles and conical and contoured Space Transportation System(STS)-class nozzles. The optimum cone angle (O_cone) for the conical micronozzle was …

A Substructuring Technique With Application To Spot Weld Placement Design, Yang Wang

Mechanical & Aerospace Engineering Theses & Dissertations

It is quite common in the industry to use various interface methods, such as welding, fasteners, bolts, adhesive bonding, etc., to join substructures together. The quality of the assembled structure is directly related to the type of the interface methods used in the manufacturing process. Thus, it is important to include the interface conditions as part of design variables in any design process. To this end, this work develops a reanalysis method that can efficiently analyze structures with variations on the interface conditions. This reanalysis method is based upon a new two-step substructuring technique. The first step performs substructural level …

Elastic Properties, Strength And Damage Tolerance Of Pultruded Composites, Mrinal Chandra Saha

Mechanical & Aerospace Engineering Theses & Dissertations

Pultruded composites are candidate materials for civil engineering infrastructural applications due their higher corrosion resistance and lower life cycle cost. Efficient use of materials like structural members requires thorough understanding of the mechanism that affects their response. The present investigation addresses the modeling and characterization of E-glass fiber/polyester resin matrix pultruded composites in the form of sheets of various thicknesses.

The elastic constants were measured using static, vibration and ultrasonic methods. Two types of piezoelectric crystals were used in ultrasonic measurements. Finally, the feasibility of using a single specimen, in the form of a circular disk, was shown in measuring …

Finite Element Analysis And Active Control For Nonlinear Flutter Of Composite Panels Under Yawed Supersonic Flow, Khaled Abdel-Motagaly

Mechanical & Aerospace Engineering Theses & Dissertations

A coupled structural-electrical modal finite element formulation for composite panels with integrated piezoelectric sensors and actuators is presented for nonlinear panel flutter suppression under yawed supersonic flow. The first-order shear deformation theory for laminated composite plates, the von Karman nonlinear strain-displacement relations for large deflection response, the linear piezoelectricity constitutive relations, and the first-order piston theory of aerodynamics are employed. Nonlinear equations of motion are derived using the three-node triangular MIN3 plate element. Additional electrical degrees of freedom are introduced to model piezoelectric sensors and actuators. The system equations of motion are transformed and reduced to a set of nonlinear …

Radiative Interactions In Thermochemical Nonequilibrium Expanding Flows, Srikanth B. Pidugu

Mechanical & Aerospace Engineering Theses & Dissertations

A numerical study is conducted to investigate radiative interactions in flows with thermal and chemical nonequilibrium. The two dimensional spatially elliptic Navier-Stokes equations have been used to numerically investigate different physical processes in the nozzle flow problem. The system of governing equations are solved using explicit, unsplit MacCormack predictor-corrector scheme. The chemistry source term is treated implicitly to alleviate stiffness associated with fast chemical reactions.

Different physical processes considered in this study are investigated in a systematic manner. Finite chemical processes in chemically reacting supersonic nozzle flows are studied. Five hydrogen-air combustion models have been employed to study the influence …

A Study For An Optimal Delivery Sequence Of A Bowling Pinspotter Distributor Mechanism, David Michael Burt

Mechanical & Aerospace Engineering Theses & Dissertations

The two major competitors in bowling sports equipment are Brunswick, Inc., and AMF Bowling Co. The latest version of a piece of bowling equipment machinery is called a Pinspotter, the design of which has been in existence since the 1950's. With the exception of electronic scoring systems, much of the original design is still being implemented in this model. It is the desire to eliminate undesirable traits in the original Pinspotter model design. Commercial Bowling observations have detected flaws found in a piece of machinery known as the Distributor. The flaws attributed to the Distributor are believed to be sources …

Design Of Adaptive Sliding Mode Fuzzy Control For Robot Manipulator Based On Extended Kalman Filter, Abdelrahman Aledhaibi

Mechanical & Aerospace Engineering Theses & Dissertations

In this work, a new adaptive motion control scheme for robust performance control of robot manipulators is presented. The proposed scheme is designed by combining the fuzzy logic control with the sliding mode control based on extended Kalman filter. Fuzzy logic controllers have been used successfully in many applications and were shown to be superior to the classical controllers for some nonlinear systems. Sliding mode control is a powerful approach for controlling nonlinear and uncertain systems. It is a robust control method and can be applied in the presence of model uncertainties and parameter disturbances, provided that the bounds of …

Curvilinear Interface Methodology For Finite-Element Applications, Ollie James Rose

Mechanical & Aerospace Engineering Theses & Dissertations

Recent trends in design and manufacturing suggest a tendency toward multiple centers of specialty which results in a need for improved integration methodology for dissimilar finite element or CFD meshes. Since a typical finite element or CFD analysis requires about 50% of an engineers effort to be devoted to modeling and input, there is a need to advance the state-of-the-art in modeling, methodology. These two trends indicate a need to for the capability to combine independently-modeled configurations in an automated and robust way without the need for global remodeling. One approach to addressing this need is the development of interfacing …

Fabrication Of Thermoplastic Composite Laminates Having Film Interleaves By Automated Fiber Placement, Anthony Bruce Hulcher

Mechanical & Aerospace Engineering Theses & Dissertations

Experiments were carried out at the NASA Langley Research Center automated fiber placement facility to determine an optimal process for the fabrication of composite materials having polymer film interleafs. A series of experiments was conducted to determine an optimal process for the composite prior to investigation of a process to fabricate laminates with polymer films. The results of the composite tests indicated that a well-consolidated, void-free laminate could be attained. Preliminary interleaf processing trials were then conducted to establish some broad guidelines for film processing. The primary finding of these initial studies was that a two-stage process was necessary in …

Improving Co-Generation Plant Performance Using Computer Modeling Software: A Parametric Study, Gerald R. Munyan

Mechanical & Aerospace Engineering Theses & Dissertations

The desire to optimize plant performance continues to direct the goals of design and plant engineers associated with larger thermal systems. With the increasing availability of software designed for modeling thermal systems, the task of improving plant performance continues to develop. The ability to model a facility using a commercially available software package allows the design engineer and plant engineer to investigate the effects of variations in plant conditions or components on overall plant operations.

An analysis of the Kirk Lumber Company's co-generating facility was performed using the modeling program PROSIM written by the consulting engineering firm Endat Oy, of …

Compressible Flow Modeling In A Low Pressure Natural Gas Fuel Injector, Eugene D. White Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

In 1997, Siemens Automotive in Newport News, Virginia, conducted mass flow experiments on their DEKA IV natural gas fuel injector using nitrogen gas as the test fluid. The mass flow rates measured from the steady state flow experiments increased linearly with increasing upstream reservoir pressure. This relationship in the experimental data suggested that a choked flow condition must exist somewhere inside the injector.

To test this hypothesis, nitrogen gas flow through the internal passages of a fuel injector at steady state was simulated using computational fluid dynamics software. Several numerical models were constructed. Axisymmetric two-dimensional models were constructed of the …

An Integrated Engineering-Computation Framework For Collaborative Engineering: An Application In Project Management, Hisham Mohamed El-Sayed Abdelsalam

Mechanical & Aerospace Engineering Theses & Dissertations

Today's engineering applications suffer from a severe integration problem. Engineering, the entire process, consists of a myriad of individual, often complex, tasks. Most computer tools support particular tasks in engineering, but the output of one tool is different from the others'. Thus, the users must re-enter the relevant information in the format required by another tool. Moreover, usually in the development process of a new product/process, several teams of engineers with different backgrounds/responsibilities are involved, for example mechanical engineers, cost estimators, manufacturing engineers, quality engineers, and project manager. Engineers need a tool(s) to share technical and managerial information and to …

A Comparison Of Quasi-Static Indentation Testing To Low Velocity Impact Testing, Michael J. Douglas

Mechanical & Aerospace Engineering Theses & Dissertations

A static test method for modeling low-velocity foreign object impact events to composites would prove to be very beneficial to researchers since much more data can be obtained from a static test than from an impact test. In order to examine if this is feasible, a series of static indentation and low velocity impact tests were carried out and compared. Square specimens of many sizes and thicknesses were utilized to cover the array of types of low velocity impact events. Laminates with a rt/4 stacking sequence were employed since this is by far the most common type of engineering laminate. …

Effects Of Ventilation On Human Thermal Comfort In Rooms, Ahmed F. Alfahaid

Mechanical & Aerospace Engineering Theses & Dissertations

Nowadays, the majority of people spend up to 90% of their time indoors; as a result, the maintenance of optimal indoor climate conditions has become important for their overall health and comfort. The main goal of this study is to predict numerically the flow and temperature patterns and the human thermal comfort conditions in an indoor environment using displacement ventilation.

A Computational Fluid Dynamics (CFD) code has been used to analyze thermal comfort conditions for a fullscale ventilated room. Unstructured grids have been used to discretize the numerical domain. Before undertaking a detailed investigation, the code was validated by comparing …

Piezoceramic Actuator Placement For Acoustic Control Of Panels, Jeffrey S. Bevan

Mechanical & Aerospace Engineering Theses & Dissertations

Optimum placement of multiple traditional piezoceramic actuators is determined for active structural acoustic control of flat panels. The structural acoustic response is determined using acoustic radiation filters and structural surface vibration characteristics. Linear Quadratic Regulator (LQR) control is utilized to determine the optimum state feedback gain for active structural acoustic control. The optimum actuator location is determined by minimizing the structural acoustic radiated noise using a modified genetic algorithm. Experimental tests are conducted and compared to analytical results.

Anisotropic piezoceramic actuators exhibit enhanced performance when compared to traditional isotropic piezoceramic actuators. As a result of the inherent isotropy, these advanced …

Suppression Of Post-Buckling Deflection And Panel-Flutter Using Shape Memory Alloy, Mohammad Tawfik Abo El So-Oud

Mechanical & Aerospace Engineering Theses & Dissertations

A novel concept proposed is the use of Shape Memory Alloy (SMA) to reduce the panel thermal deflection and flutter responses. SMA has unique ability to recover large prestrains completely when the alloy is heated (by aerodynamic heating in the present case) above the austenite start temperature A_s. During the recovery process, a large tensile recovery stress occurs if the SMA is restrained.

In this thesis, a panel subject to the combined aerodynamic and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA …

An Experimental Investigation Into The Effect Of Clearance And Torque On Load Sharing In A Bolted Joint, Jerry B. Robertson

Mechanical & Aerospace Engineering Theses & Dissertations

The shear load experienced by each bolt in a multi-fastener bolted butt joint is a percentage of the total load applied to the joint. Joint failure can be premature when one fastener is subjected to a disproportional amount of the total load. Conversely, the ultimate load the joint can endure may be increased if the distribution of loads can be equalized by some means. In this investigation, two and four fastener butt joints were studied. An instrumented bolt was constructed that could measure the bending stresses in the bolt associated with the bearing load. That data was converted into force …

Continuous Adjoint Sensitivity Analysis For Aerodynamic And Acoustic Optimization, Kaveh Ghayour

Mechanical & Aerospace Engineering Theses & Dissertations

A gradient-based shape optimization methodology based on continuous adjoint sensitivities has been developed for two-dimensional steady Euler equations on unstructured meshes and the unsteady transonic small disturbance equation. The continuous adjoint sensitivities of the Helmholtz equation for acoustic applications have also been derived and discussed.

The highlights of the developments for the steady two-dimensional Euler equations are the generalization of the airfoil surface boundary condition of the adjoint system to allow a proper closure of the Lagrangian functional associated with a general cost functional and the results for an inverse problem with density as the prescribed target. Furthermore, it has …

Computational Modeling Of Airborne Noise Demonstrated Via Benchmarks, Supersonic Jet, And Railway Barrier, Moumen Idres

Mechanical & Aerospace Engineering Theses & Dissertations

In the last several years, there has been a growing demand for mobility to cope with the increasing population. All kinds of transportation have responded to this demand by expanding their networks and introducing new ideas. Rail transportation introduced the idea of high-speed trains and air transportation introduced the idea of high-speed civil transport (HSCT). In this expanding world, the noise legislation is felt to inhibit these plans. Accurate computational methods for noise prediction are in great demand.

In the current research, two computational methods are developed to predict noise propagation in air. The first method is based on the …

Setpoint Tracking Predictive Control In Chemical Processes Based On System Identification, Sinchai Chinvorarat

Mechanical & Aerospace Engineering Theses & Dissertations

A Kraft recovery boiler in a pulp-paper mill provides a means for recovery of the heat energy in spent liquor and recovery of inorganic chemicals while controlling emissions. These processes are carried out in a combined chemical recovery unit and steam boiler that is fired with concentrated black liquor and which produces molten smelt. Since the recovery boiler is considered to be an essential part of the pulp-paper mill in terms of energy resources, the performance of the recovery boiler has to be controlled to achieve the highest efficiency under unexpected disturbances.

This dissertation presents a new approach for combining …