Mechanical Engineering Commons^™

Forced Convection Cooling Of Electric Motors Using Enhanced Surfaces, Mohammed Almaghrabi

Electronic Theses and Dissertations

Electric motors are extensively engaged in industrial and commercial applications such as electrical cars, energy-conversion systems, elevators, and actuators for aircrafts. Due to the significant internal heat generation, it is usually a challenge to design and manufacture high power density, high reliability, and low cost electric motors with superior performance. One of the efficient ways to dissipate the heat generated in the electrical motor is by using extended surfaces (i.e. heat sinks). These surfaces are extruded from the motor casing and air is forced though them by a cooling fan. This cooling approach is simple to be implemented and has …

A Multi-Scale Approach To Study Solid Oxide Fuel Cells: From Mechanical Properties And Crystal Structure Of The Cell's Materials To The Development Of An Interactive And Interconnected Educational Tool, Amjad Aman

Electronic Theses and Dissertations

Solid Oxide Fuel Cells are energy conversion devices that convert chemical energy of a fuel directly into electrical energy. They are known for being fuel-flexible, have minimal harmful emissions, ideal for combined heat and power applications, highly energy-efficient when combined with gas or steam turbines. The current challenges facing the widespread adoption these fuel cells include cost reduction, long-term testing of fully integrated systems, improving the fuel cell stack and system performance, and studies related to reliability, robustness and durability. The goal of this dissertation is to further the understanding of the mechanical properties and crystal structure of materials used …

Low-Velocity Impact To High-Temperature Low-Sag Overhead Conductors, Daniel Halka Waters

Electronic Theses and Dissertations

High-Temperature Low-Sag (HTLS) conductors, such as Aluminum Conductor Composite Core (ACCC), improve infrastructure to support the delivery of power to meet the nation's increasing demand for electricity. Their response to low-velocity impacts during transportation, installation or in service, however, has not been addressed in the past. Therefore, this study investigates both experimentally and numerically mechanical effects associated with transverse low-velocity impacts on energy dissipation by the conductors subjected to either free or constrained end conditions and large axial tensile loads. Impact experiments were conducted using a newly designed and manufactured testing apparatus. The experimental work was strongly supported by non-linear …

Anatomy, Implant Selection And Placement Influence Spine Mechanics Associated With Total Disc Replacement, Justin F.M. Hollenbeck

Electronic Theses and Dissertations

Through aging and injury, the intervertebral disc of the lumbar spine can undergo degeneration, leading to collapse of the vertebrae and low back pain, a symptom that affects half the adult population in any given year. In an effort to reduce low back pain, total disc replacement treatment removes the degenerated disc, restores natural height and lordosis of the segment, and preserves motion at the joint. Patient anatomy, implant selection, and implant placement play significant roles in a patient's outcomes after total disc replacement surgery. Thus, the objective of the work presented in this thesis was to develop a suite …

Optimal Switch Timing For Piezoelectric-Based Semi-Active Vibration Reduction Techniques, Christopher Kelley

Electronic Theses and Dissertations

Semi-active vibration reduction techniques switch a piezoelectric transducer between an open circuit and a shunt circuit in a way that reduces vibration. The steady-state vibration amplitude is reduced by exploiting the change in stiffness between states, manipulating the converted electrical energy, or both. Semi-active techniques typically require four switches per vibration cycle. Control laws such as state switching and synchronized switch damping require switches to occur at every displacement extrema. Due to the complexity of analyzing a system with discrete switches, these control laws were developed based on intuition. The few analyses that attempt to determine an optimal switching law …

Effect Of Poisson’S Ratio On Material Properties Characterization By Nanoindentation With A Cylindrical Flat Tip Indenter, Md Mehadi Hassan

Electronic Theses and Dissertations

Nano indentation technology is commonly used to determine the mechanical properties of different kinds of engineering materials. The young’s modulus of the materials can be calculated with the load depth data obtained from an indentation test with a known Poisson’s ratio. In this investigation the NANOVEA micro/nanoindentation tester with a cylindrical flat-tip indenter will be used to find the elastic modulus, hardness and Pile up. Low carbon steel AISI1018, alloy steel AISI 4340 and aluminum alloy 6061 were selected for the case study. Finite element (FE) analysis using axisymmetric 3-D models used to establish the relationship between Poisson’s ratio and …

The Effects Of Carbon Fiber Misalignment On Composite Material Strength, Luke Stangler

Electronic Theses and Dissertations

Nondestructive Evaluation (NDE) is an effective way for determining material properties. More specifically, ultrasonic waves along with visual measurements from a microscope can be used to systematically determine the elastic modulus of single ply composites that are subject to an altered manufacturing process. In this approach, the magnitude of specific ultrasonic wave velocities is applied through Chirstoffel's equations to determine the necessary five elastic constants that describe the elastic modulus of transversely isotropic composites. On the other hand, fiber misalignment measurements are taken through via digital microscopy to satisfy a statistical approach for the determination of the same elastic modulus. …

Methods And Implementation Of Fluid-Structure Interaction Modeling Into An Industry-Accepted Design Tool, Donn R. Sederstrom

Electronic Theses and Dissertations

Fluid-structure interaction (FSI) modeling is a method by which fluid and solid domains are coupled together to produce a single result that cannot be produced if each physical domain was evaluated individually. The work presented in this dissertation is a demonstration of the methods and implementation of FSI modeling into an industry-appropriate design tool. Through utilizing computationally inexpensive equipment and commercially available software, the studies presented in this work demonstrate the ability for FSI modeling to become a tool used broadly in industry.

To demonstrate this capability, the cases studied purposely include substantial complexity to demonstrate the stability techniques required …

Finite Element And Probabilistic Analysis Of Soft Tissue Structures Of The Human Lumbar Spine, Dana Joseph Coombs

Electronic Theses and Dissertations

Human lumbar spine mechanics are influenced by soft tissue structures. Understanding and properly modeling these structures can help determine pathology, treatment, and implant design and performance. Finite element models of the L4-L5 level of the lumbar spine are often used, which include a representation of the intervertebral disc and spinal ligaments. Validation of these models are typically based on torque rotation data from a single subject or the models use average properties reported in literature. However, experimental testing reports variation up to 40% in ligament stiffness and even greater variability for annulus fibrosis properties. Probabilistic approaches enable consideration of the …

Statistical Modeling To Investigate Anatomy And Function Of The Knee, Lowell Matthew Smoger

Electronic Theses and Dissertations

The natural knee is a hinge joint with significant functional requirements during activities of daily living; as a result, acute and chronic injuries can occur. Pathologies are influenced by joint anatomy and may include patellar maltracking, cartilage degeneration (e.g. osteoarthritis), or acute injuries such as meniscal or ligamentous tears. Population variability makes broadly applicable conclusions about etiology of these conditions from small-scale investigations challenging. The work presented in this dissertation is a demonstration of statistical modeling approaches to evaluate population variability in anatomy of the knee and function of its tibiofemoral (TF) and patellofemoral (PF) joints. Three-dimensional (3D) computational models …

Application Of The Aeroacoustic Analogy To A Shrouded, Subsonic, Radial Fan., Bryan Buccieri

Electronic Theses and Dissertations

A study was conducted to investigate the predictive capability of computational aeroacoustics with respect to a shrouded, subsonic, radial fan. A three dimensional unsteady fluid dynamics simulation was conducted to produce aerodynamic data used as the acoustic source for an aeroacoustics simulation. Two acoustic models were developed: one modeling the forces on the rotating fan blades as a set of rotating dipoles located at the center of mass of each fan blade and one modeling the forces on the stationary fan shroud as a field of distributed stationary dipoles. Predicted acoustic response was compared to experimental data. The blade source …

Evaluation Of Two-Phase Evaporation Pressure Drop Correlations For Low Refrigerant Mass Flux., Anna Fenko

Electronic Theses and Dissertations

This study was conducted to evaluate three currently popular two-phase pressure drop models for extremely low velocity refrigerant flow through smooth circular evaporators in household refrigeration systems. Experimental data was taken at mass fluxes under 70 kg/m²s for two refrigerants, R134A and R600A, internal diameters of aluminum evaporators ranging from 0.186 to 0.317 inches, U-bend internal radii ranging from 0.342 to 0.750 inches in horizontal and vertical orientations of evaporators. The geometry of the samples closely resembled a commonly used serpentine shape with multiple U-bends experiencing both, up- and down-flow of the refrigerant. Two empirical models, Müller-Steinhagen & …

Performance Analysis Of A Copper Ii Sulfate Pentahydrate Based Thermogalvanic Cell., Steffen Krebs

Electronic Theses and Dissertations

Low grade heat recovery systems are more relevant today due to the rising costs in energy and transition to non-fossil fuel energy sources. Thermogalvanic cells show potential due to low cost and scalability. In this study the performance of a Copper II Sulfate Pentahydrate based electrolyte was evaluated. The effects of electrolyte concentration, electrode separation, and electrode surface area were studied experimentally. Conductive heat transfer within the electrolyte was simulated via SolidWorks. All experimental thermocell testing was conducted to find the maximum power production of a particular cell design. The base cell had a six inch electrode separation with two …

Mechanics Of Electrode Materials In Lithium Battery Applications., Jubin Chen

Electronic Theses and Dissertations

During lithiation and detlithiation, substantial volumetric changes occur within the electrode materials used for rechargeable lithium batteries. The magnitude of these deformations is inherently linked to the electrical capacity of the battery electrical capacity, which tends to degrade with repeated cycling. In this dissertation, the relationship between electrical discharge capacity and mechanical deformation state is examined using in-situ imaging of the working electrode surface within a custom CR2032 coin cell lithium battery. Digital image correlation is used to quantify electrode strains throughout the discharge-charge process. The effect of constraint due to substrate stiffness is investigated for two film materials: traditional …

Experimental And Analytical Study Of An Open Cathode Polymer Electrolyte Membrane Fuel Cell., Alex Martin Bates

Electronic Theses and Dissertations

In this thesis four different fuel cell designs were simulated with consideration for electrochemical effects, reactant species transport, and heat transfer. Simulation results include the mass fraction of hydrogen, oxygen, and water, temperature gradient, pressure gradient, and velocity profile. One of the fuel cell designs was experimentally tested using two different membrane electrolyte assemblies; one high performance and the other high durability. The polarization curve resulting from simulation compares well with the polarization curve produced by experimental work. A 16 cell fuel cell stack was simulated with consideration for stack compression. The same fuel cell stack was tested experimentally for …

Vanadium Trichloride Thermochemical Solar Energy Storage System Analysis., Caleb Michael Rogers

Electronic Theses and Dissertations

As annual energy consumption grows, developing renewable solar energy conversion systems, storage systems, and high density electrical energy production systems is growing increasingly important. The proposed system utilizes vanadium trichloride thermal decomposition to produce chlorine gas and vanadium dichloride. A second reaction combines gaseous hydrogen chloride and the product vanadium dichloride to reform vanadium trichloride and produce hydrogen gas. Hydrogen gas and chlorine gas can be stored indefinitely and electrical energy is obtained from the chemicals by a non-humidified dry membrane hydrogen – chlorine fuel cell. The fuel cell produces the gaseous hydrogen chloride needed to reform vanadium trichloride. The …

Development Of A Surrogate Bruising Detection System To Describe Potential Bruising Patterns Associated With Common Childhood Falls., Raymond Dsouza

Electronic Theses and Dissertations

Child abuse is a leading cause of fatality in children aged 0-4 years. An estimated 1,700 children die annually as a result of child abuse of which threequarters (75.7%) of the children were younger than 4 years old1. Infants (younger than 1 year) had the highest rate of fatalities among the group. Many of the serious injuries and fatalities could have potentially been prevented if clinicians and child protective services were able to better distinguish between injuries associated with abuse versus those caused by accidents. Missed cases of child abuse have been shown to be as high as 71% of …

Bi-Stable Buckled Energy Harvesters Actuated Via Torque Arms., Daniel Allen Porter

Electronic Theses and Dissertations

Vibrational energy harvesters (VEH) are one way to generate electricity. Though the energy quantities are not enough to run desktop computers, they can power remote devices such as temperature, pressure, and accelerometer sensors or power biological implants. New versions of the Bluetooth protocol can even be used with VEH technology to send wireless data. An important aspect of VEH devices is the power output, operating frequency, and bandwidth. This dissertation investigates a novel method of actuating the primary buckled energy harvesting structure using torque arms as a force amplification mechanism. Buckled structures can exhibit snap-through and has the potential to …

On Thermal Aging Prevention In Polymer Core Composite Conductor Rods, Joe D. Hoffman

Electronic Theses and Dissertations

Increased energy usage in the United States and worldwide is driving the demand for new technologies to transmit electrical power in greater quantities and with reliable, safe, and more efficient methods. One recent innovation is to replace the standard Aluminum Conductor Steel Reinforced electrical transmission conductor with a new conductor design that utilizes a fiber reinforced polymer core rod to support a fully annealed aluminum conductor. This new technology that includes a hybrid carbon fiber/epoxy and glass fiber/epoxy support core allows for better efficiency and for greater current to be transmitted in the same size and weight line. These new …

Finite Element Analysis Of Thermal Buckling In Automotive Clutch And Brake Discs, Huizhou Yang

Electronic Theses and Dissertations

Thermal buckling behavior of automotive clutch and brake discs is studied by making the use of finite element method. It is found that the temperature distribution along the radius and the thickness affects the critical buckling load considerably. The results indicate that a monotonic temperature profile leads to a coning mode with the highest temperature located at the inner radius. Whereas a temperature profile with the maximum temperature located in the middle leads to a dominant non-axisymmetric buckling mode, which results in a much higher buckling temperature. A periodic variation of temperature cannot lead to buckling. The temperature along the …

Thermally Induced Motion, Collision And Mixing Of Levitated Droplets, Ashkan Davanlou

Electronic Theses and Dissertations

This dissertation investigates the motion of a levitated droplet experimentally and analytically against the Marangoni flow in an immiscible outer fluid at higher speeds than is possible currently. Based on our earlier experiments, when a droplet is released from a height of 1.5 – 4 times its diameter from the liquid surface, it can overcome the impact and stay levitated at the liquid-air interface due to the existence of an air gap between the droplet and the liquid film. In order to explain this behavior of droplet traveling against the counter-current motion, we propose a simple approach: first, the Marangoni …

Biomechanics Of Developmental Dysplasia Of The Hip - An Engineering Study Of Closed Reduction Utilizing The Pavlik Harness For A Range Of Subtle To Severe Dislocations In Infants., Victor Huayamave

Electronic Theses and Dissertations

Developmental Dysplasia of the Hip (DDH) is an abnormal condition where hip joint dislocation, misalignment, or instability is present in infants. Rates of incidence of DDH in newborn infants have been reported to vary between 1 and 20 per 1000 births, making it the most common congenital malformation of the musculoskeletal system. DDH early detection and treatment is critical to avoid the use of surgical treatment in infants and to prevent future complications such as osteoarthritis in adult life. To this day several non-surgical treatments involving the use of harnesses and braces have been proposed to treat DDH in infants, …

Comparison Of Modeling Methods For Power Cycle Components Using Supercritical Carbon Dioxide As The Operating Fluid, Joshua Schmitt

Electronic Theses and Dissertations

Supercritical carbon dioxide as a working fluid in a Brayton power cycle has benefits but also faces unique challenges in implementation. With carbon dioxide, turbomachinery is much more compact and potentially more cost effective. The primary impediments to cycle component performance are the high pressures required to bring the fluid to a supercritical state and the wildly varying fluid properties near the critical point. Simple design models are often used as a quick starting point for modern turbomachinery and heat exchanger design. These models are reasonably accurate for design estimate, but often assume constant properties. Since supercritical carbon dioxide varies …

Coordinated Optimal Power Planning Of Wind Turbines In A Wind Farm, Puneet Vishwakarma

Electronic Theses and Dissertations

Wind energy is on an upswing due to climate concerns and increasing energy demands on conventional sources. Wind energy is attractive and has the potential to dramatically reduce the dependency on non-renewable energy resources. With the increase in wind farms there is a need to improve the efficiency in power allocation and power generation among wind turbines. Wake interferences among wind turbines can lower the overall efficiency considerably, while offshore conditions pose increased loading on wind turbines. In wind farms, wind turbines* wake affects each other depending on their positions and operation modes. Therefore it becomes essential to optimize the …

A Full Coverage Film Cooling Study: The Effect Of An Alternating Compound Angle, Justin Hodges

Electronic Theses and Dissertations

This thesis is an experimental and numerical full-coverage film cooling study. The objective of this work is the quantification of local heat transfer augmentation and adiabatic film cooling effectiveness for two full-coverage film cooling geometries. Experimental data was acquired with a scientific grade CCD camera, where images are taken over the heat transfer surface, which is painted with a temperature sensitive paint. The CFD component of this study served to evaluate how well the v2-f turbulence model predicted film cooling effectiveness throughout the array, as compared with experimental data. The two staggered arrays tested are different from one another through …

Combustion Kinetics Of Advanced Biofuels, Ghazal Barari

Electronic Theses and Dissertations

Use of biofuels, especially in automotive applications, is a growing trend due to their potential to lower greenhouse gas emissions from combustion. Ketones are a class of biofuel candidates which are produced from cellulose. However, ketones received rather scarce attention from the combustion community compared to other classes such as, alcohols, esters, and ethers. There is little knowledge on their combustion performance and pollutant generation. Hence their combustion chemistry needs to be investigated in detail. Diisopropyl ketone (DIPK) is a promising biofuel candidate, which is produced using endophytic fungal conversion. A detailed understanding of the combustion kinetics of the oxidation …

Modeling Phase Change Heat Transfer Of Liquid/Vapor Systems In Free/Porous Media, James Wilson

Electronic Theses and Dissertations

Effective solvent extraction incorporating electromagnetic heating is a relatively new concept that relies on Radio Frequency heating and solvents to replace steam in current thermal processes for the purpose of extracting bitumen from oil rich sands. The work presented here will further the understanding of the near wellbore flow of this two phase system in order to better predict solvent vaporization dynamics and heat rates delivered to the pay zone. This numerical study details the aspects of phase change of immiscible, two component, liquid/vapor systems confined in porous media heated by electromagnetic radiation, approximated by a spatially dependent volumetric heat …

Large Eddy Simulations With A Tabulated Conditional Moment Closure Moment Closure Model For Turbulent Premixed Combustion With Heat Loss, Carlos Velez

Electronic Theses and Dissertations

The Tabulated Premixed Conditional Moment Closure (T-PCMC) method has been shown to provide the capability to predict turbulent, premixed methane flames with detailed chemistry and reasonable run times in a RANS/URANS adiabatic environment. Here the premixed T-PCMC method is extended in a Large Eddy Simulation (LES) framework for non-adiabatic premixed flames, allowing heat loss to occur in the mixture before, during and after combustion. It is proposed that the LES framework is a more suitable representation for both chemical and turbulent scales in premixed combustion. By resolving the high energy turbulent scales and modeling the small scale turbulence, it is …

Multi-Row Film Cooling Boundary Layers, Greg Natsui

Electronic Theses and Dissertations

High fidelity measurements are necessary to validate existing and future turbulence models for the purpose of producing the next generation of more efficient gas turbines. The objective of the present study is to conduct several different measurements of multi-row film cooling arrays in order to better understand the physics involved with injection of coolant through multiple rows of discrete holes into a flat plate turbulent boundary layer. Adiabatic effectiveness distributions are measured for several multi-row film cooling geometries. The geometries are designed with two different hole spacings and two different hole types to yield four total geometries. One of the …

Dynamic Response Of Glass Under Low-Velocity Impact And High Strain-Rate Compression Loading, Seyed Soheil Daryadel

Electronic Theses and Dissertations

In this research, the dynamic response and energy absorption characteristics of four different types of commercially available glass have been investigated experimentally. Soda Lime, Starphire, Borosilicate, and Fused Silica were characterized using a Dynatup 8250 drop weight impact test system, and a modified Split Hopkinson Pressure Bar (SHPB). In the low-velocity punch-shear experiment, similar trend has been observed for all glass types, and Starphire and Borosilicate demonstrated the highest total energy absorption. High strain-rate SHPB compression tests were carried out on cylindrical glass samples at two different strain-rates. Borosilicate shohigher compressive strength and energy absorption in comparison to the other …