Mechanical Engineering Commons^™

Metastability And Degradation In Cu(In,Ga)Se2 Thin-Film Solar Cells, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cu(In,Ga)(S,Se)2 or CIGS is a thin-film semiconductor that has shown a device efficiency of 23.35% and 24.2% for single-junction and perovskite/CIGS tandem solar cells, respectively. CIGS offers promising properties such as tunable bandgap and ease of processing making them great candidates for thin-film tandem devices. However, knowledge of the effect of material defects, buffer materials, and post-deposition treatment (PDT) on degradation and metastability behavior in these devices is not well understood.In this dissertation, metastability and long-term degradation of CIGS thin-film solar cells have been investigated under combinatorial stress factors of heat, light, and voltage bias to systematically understand the effect …

Time-Dependent Wetting Behavior Of Hydrogels, Amir Kashani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hydrogels are 3-D polymers with hygroscopic properties that enable them to absorb and retain large amounts of water. In many applications such as biomedical applications, including drug delivery, wound healing, tissue engineering, biosensors, and contact lenses, agriculture, food and beverage, cosmetics, and environmental, hydrogels also need to maintain a high degree of wetting in order to ensure effective functionality and interaction with surrounding fluids or tissues in desired applications. The combination of wetting and absorptive behavior of hydrogels that are often encountered in biomedical, biological, industrial and the mentioned applications presents a challenging physical problem that is not completely understood. …

A One-Dimensional Analysis Of A Microbial Fuel Cell For Efficient Acetate Removal And Power Density Output, David Rouhani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Microbial fuel cells (MFCs) are electrochemical devices that utilize microorganisms to convert organic matter into electrical energy. MFCs have been discussed to have potential application for sustainable wastewater treatment due to their ability to generate electricity while simultaneously treating contaminated water. To optimize MFC performance, numerical models can be used to understand the complex electrochemical and biological processes occurring in the system. In this study, a numerical model was developed to simulate the performance of MFCs under varying operating conditions and to investigate the performance of a MFC for treating wastewater fuel. More specifically, the MFC was modeled to oxidize …

An Investigation Of Soft Electrohydraulic Actuators: Theory, Characterization, And Conceptual Applications, Alexandrea Washington

UNLV Theses, Dissertations, Professional Papers, and Capstones

Electroactive polymer (EAP) materials are a novel soft electromechanical device that exploits the inherent electrical and mechanical advantages of flexible polymer materials. Within this groundbreaking field there are various actuator and sensor devices that have been developed for a variety of applications, from medical devices to artificial biological systems. This research focuses on electrohydraulic actuators, which are comprised of a flexible conductive medium, a dielectric fluid, and a compliant film material to encapsulate the dielectric fluid. This specific study centers around the electrohydraulic EAP actuator known as the Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuator, first introduced by the Keplinger group …

Dynamic Surface Tension Of Surfactants Through Separation Of Diffusion And Dilation Effects, Brandon Ortiz

UNLV Theses, Dissertations, Professional Papers, and Capstones

Surfactants are biphilic monomers that adsorb to interfaces and have the ability to reduce interfacial tension. From this reduction in interfacial tension, surfactants are able to function as emulsifiers, detergents, and wetting agents among a variety of other things. Despite their ubiquity surfactants and surfactant behaviors, in particular those in highly dynamic environments, are not yet well characterized. In these environments, surfactants undergo significant distortions to droplet, bubble, and foam geometries which induce changes to the surface tension. This establishes a need to understand how surfactants respond to distortions of geometry through diffusion and dilational effects. To address this need, …

Mechanoelectrical Behavior In Polyvinyl Chloride (Pvc) Based Soft Polymer Gel Smart Sensors For Soft Robotic Applications, Justin Neubauer

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyvinyl chloride (PVC) gels are a class of electroactive polymer that contain a PVC-based polymeric lattice and various amounts of plasticizer. PVC and plasticizer are industrially available and are commonly used in a wide range of applications including cable insulation, flexible hosing, and healthcare equipment. There are many plasticizer types available, some being extremely biocompatible with implementations in food-safe applications and even food additives for human consumption. Plasticizer weakly bonds to the long polymerized chains of the polymer lattice decreasing the modulus of the composite material. By adding excessive amounts of plasticizer, the bonding sites of these long carbon chains …

How Dynamic Adsorption Controls Surfactant‑Enhanced Boiling, Mario R. Mata, Brandon Ortiz, Dhruv Luhar, Vesper Evereux, H. Jeremy Cho

Mechanical Engineering Faculty Research

Improving boiling is challenging due to the unpredictable nature of bubbles. One way to enhance boiling is with surfactants, which alter the solid–liquid and liquid–vapor interfaces. The conventional wisdom established by previous studies suggests that heat transfer enhancement is optimized near the critical micelle concentration (CMC), which is an equilibrium property that depends on surfactant type. However, these studies only tested a limited number of surfactants over small concentration ranges. Here, we test a larger variety of nonionic and anionic surfactants over the widest concentration range and find that a universal, optimal concentration range exists, irrespective of CMC. To explain …

Nemesis Setup For Indirect Detection Of Wimps, W. H. Trzaska, Alexander Barzilov, T. Enqvist, K. Jedrzejczak, J. Joutsenvaara, M. Kasztelan, O. Kotavaara, P. Kuusiniemi, K. K. Loo, J. Orzechowski, J. Puputti, M. Slupecki, J. Szabelski, I. Usoskin, T. E. Ward

Mechanical Engineering Faculty Research

We summarize the evidence for DM-like anomalies in neutron multiplicity spectra collected underground with Pb targets by three independent experiments: NEMESIS (at 210 m.w.e.) NMDS (at 583 m.w.e.), and ZEPLIN-II (at 2850 m.w.e.). A new analysis shows small but persistent anomalies at high neutron multiplicities. Adjusted for differences in detection efficiencies, the positions of the anomalies are consistent between the three systems. Also, the intensities match when corrected for the acquisition time and estimated detection efficiency. While the three measurements are inconclusive when analyzed separately, together, they exclude a statistical fluke to better than one in a million. To prove …

A Physics-Based Modeling Of A Hydraulically Amplified Electrostatic Actuator, Alexandrea Washington, Zakai Olsen, Ji Su, Kwang J. Kim

Mechanical Engineering Faculty Research

The focus of this study is to understand the physical phenomenon of the liquid-based electroactive polymer (EAP) actuator known as the Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuator. Specifically, this study provides data in several areas, including the deformation of the film material, the dynamics of the dielectric liquid, and the electrical conditions within the actuator body. A two-dimensional model was developed in the finite element software, COMSOL Multiphysics, to create a generalized physics-based framework that describes the actuation mechanism. Much of the predictive data agreed well with the experimental data, such as the electrode pull-in occurring at ∼4.5 kV and …

Enhancements To Nuclear Thermal Propulsion Rockets, Kimberly Gonzalez

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nuclear thermal rocket propulsion has been proposed as a highly efficient technology for space vehicles traveling from earth orbit to the moon, Mars, and other locations in the solar system. With twice the performance of a chemical rocket, nuclear thermal propulsion (NTP) uses the thrust produced by heating hydrogen gas within a thermal nuclear reactor where the exhaust is then passed through a de Laval nozzle to produce supersonic flow. NTP engines were the subject ofthe NERVA experiments at the Nevada Test Site in the 1970’s, and they produced a specific impulse of up to 900 seconds which is almost …

Mobile 3d Printing Of Rail Track Surface For Rapid Repai, Ershad Mortazavian

UNLV Theses, Dissertations, Professional Papers, and Capstones

The frequent replacement of worn rails on tracks brings an immense economic burden on the railroad industry, and also causes significant interruptions to railroad operation. Restoration of worn rails via additive manufacturing, i.e., 3D printing, can considerably reduce the associated maintenance costs.The scope of this dissertation is to utilize metal additive manufacturing (AM) technology to repair worn rails that are used in the U.S. railway transportation system (e.g. 75-lb/yd light transit rails, or 136-lb/yd heavy freight rails). More specifically, this study aims to understand the interactive mechanisms between the deposited materials and the high-carbon rail steel to identify and alleviate …

Towards High-Efficient Broadband Omnidirectional Light-Trapping: Discrepancy-Assisted 2d/3d Deterministic Quasi-Random Nanostructure Design, Optimization, And Fabrication, Yihong Zhao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Recently, nano-scaled surface decoration has brought significant advancement and exciting new possibilities to light management. Numerous nanostructure patterns have been explored, wherein the quasi-random nanostructures (QRNs) present a promising path in manipulating light to increase the photon flux over the broadband spectra for optical (e.g., photovoltaic) devices. However, due to the infinite number of QRNs, it is difficult to directly design and fabricate the exact QRN pattern as desired to achieve the optimized light-trapping capability. To overcome this obstacle, we 1) digitize the traditional continuous QRNs into meshes and then map the meshes to binary matrices, which can be deterministically …

On The Mechanism Of Performance Improvement Of Electroactive Polyvinyl Chloride (Pvc) Gel Actuators Via Conductive Fillers, Zachary Frank, Kwang J. Kim

Mechanical Engineering Faculty Research

The electromechanical actuation of transparent plasticized polyvinyl chloride (PVC) gels with conductive fillers were studied. The effects of functionalized carbon nanotubes (CNTs) and 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF4) ionic liquid (IL) on both the electrical conduction and dielectric processes within PVC gels were investigated, and the differences between the two were clarified. Both CNTs and IL were shown to increase the conductivity of the gels and produce larger electromechanical transduction of a contraction actuator, but only CNTs were shown to increase the electrostatic adhesion force of the PVC gels. The addition of charge carriers to the gel via the inclusion of ILs …

Fuel Injector Design Of A Hypersonic Jet Engine Using Computational Fluid Dynamics, Melissa Rose Mercado

UNLV Theses, Dissertations, Professional Papers, and Capstones

The development of hypersonic airbreathing engines, such as a supersonic combustion ramjet, or scramjet, are implemented for flight Mach numbers over 5 where combustion must occur in supersonic conditions. The advancement of scramjet propulsion has led to favored usage over rocket propulsion systems for in atmosphere applications due to their lighter weight, higher specific impulse, and greater maneuverability [1]. The combustor section of a scramjet engine houses the fuel injectors. Fuel is injected into the supersonic flow with the main objective of achieving rapid and thorough fuel-air mixing because the residence time in the combustion chamber has a timescale of …

Predicting The Progression Of Diabetes Mellitus Using Dynamic Plantar Pressure Parameters, Mathew Sunil Varre

UNLV Theses, Dissertations, Professional Papers, and Capstones

Introduction: Diabetic peripheral neuropathy is one of the common complications of type-2 diabetes mellitus (DM). Changes in the intrinsic plantar tissue coupled with repetitive mechanical loads and loss of sensation may lead to foot related complications (skin break down, ulcerations, and amputations) in persons with neuropathy if left untreated. The purpose of this dissertation was to stratify individuals with pre-diabetes, diabetes with and without neuropathy using dynamic plantar pressure parameters during walking, using machine learning algorithms.Methods: Plantar pressure data was collected from one hundred participants during walking with pressure measuring insoles fixed between the feet and thin socks. Simultaneously high-definition …

Radiomic Features To Predict Overall Survival Time For Patients With Glioblastoma Brain Tumors Based On Machine Learning And Deep Learning Methods, Lina Chato

UNLV Theses, Dissertations, Professional Papers, and Capstones

Machine Learning (ML) methods including Deep Learning (DL) Methods have been employed in the medical field to improve diagnosis process and patient’s prognosis outcomes. Glioblastoma multiforme is an extremely aggressive Glioma brain tumor that has a poor survival rate. Understanding the behavior of the Glioblastoma brain tumor is still uncertain and some factors are still unrecognized. In fact, the tumor behavior is important to decide a proper treatment plan and to improve a patient’s health. The aim of this dissertation is to develop a Computer-Aided-Diagnosis system (CADiag) based on ML/DL methods to automatically estimate the Overall Survival Time (OST) for …

New Mathematical Models For Acoustic Insertion Loss Of Fiberglass Lining In Hvac Duct, Michael Anthony Schwob

UNLV Theses, Dissertations, Professional Papers, and Capstones

The design objectives for HVAC air distribution systems are thermal comfort, good indoor air quality, energy efficiency, low construction cost, and appropriate indoor noise levels. The last objective requires that the designer can predict the attenuation of sound transmitted through an air duct. One form of attenuation commonly introduced to an air distribution system to achieve interior noise criteria is fiberglass liner. Past research has been conducted to obtain reliable and accurate insertion loss (IL) data for duct with fiberglass liner. Empirical efforts have relied on limited data sets. Computational efforts have produced numerical models that are not practical for …

Carbon Fiber Coil Spring Characterization And Manufacturing, Cooper Madrazo

UNLV Theses, Dissertations, Professional Papers, and Capstones

Helical coil springs are used in many mechanical design applications including industrial machines, devices, and vehicle suspension systems. It is desirable to minimize the weight of vehicle suspension systems as this can improve performance and handling. Most vehicle suspension coil springs are made from solid steel alloys or other metallic materials. Significant weight savings could be achieved if the metallic material were replaced by high performance fiber reinforced polymer composites. However, the coil spring geometry is a difficult manufacturing challenge for composite materials. The goal of this thesis was to investigate efficient and low-cost manufacturing methods to produce light-weight polymer …

Transdisciplinarity In Experience Design: A Global Survey Of Higher Ed Programs In Exd/Xd, Yvonne Houy

Creative Collaborations

In our age of ubiquitous devices and digital media it is the perceived value of the end-to-end experience that brings people to a place. Designing inspiring and emotionally engaging end-to-end experiences requires experts in a wide range of disciplines committed to an interdisciplinary collaboration that can arrive at transdisciplinary design - the sum becomes greater than its parts.

Civil engineering, hospitality, business, psychology, digital User Experience (UX) design, and experience data analysis need to be seamless integrated with the fine and performing arts and design fields:

• Architecture, interior, landscape and sound design actively engage the senses.

• Graphic and fine arts …

  ---

  Go to article

Turbulence Modeling Of Shock Boundary Layer Interaction In Hypersonic Flows, Sogol Pirbastami

UNLV Theses, Dissertations, Professional Papers, and Capstones

Over the past few years, renewed interest in hypersonic research has significantly increased. Some of the most challenging obstacles in hypersonic vehicles design are associated with the shock wave turbulent boundary layer interactions (STBLI). This can cause a severe jump in pressure along with aerothermodynamic loads, which might result in structural damages or engine unstarts of hypersonic vehicles. Understanding the complex characteristics of these flows requires comprehensive physical experiments and detailed CFD turbulence modeling. In this dissertation, CFD simulations of STBLI using different turbulent modeling based on a set of experiments of hypersonic flow over a large hollow cylinder flare …

Modeling The Mechanical Behavior And Shock Propagation Of Metallic And Nanocomposite Materials, Pouya Shojaeishahmirzadi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Evaluating the materials properties under different loading conditions is critical in various industries. Compared to quasi-static loading, predicting the behavior of structures under dynamic loads is more challenging. In this work, we will address multiple problems with strain rates varying from quasi-static to hypervelocity conditions. Computer simulation is increasingly used in the design and evaluation phases to improve the efficiency, cost-effectiveness, and flexibility. However, verification and validation of each simulation is necessary. Experiments are performed in all topics and the computational models are validated by comparing with the experiments. One of the most common types of connections in structures is …

Polyvinyl Chloride Gels: Theoretical Modeling Of Their Actuation Mechanism And Characterization Of Their Properties, Zachary Frank

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyvinyl chloride (PVC) gels are an electroactive polymer smart material which has been considered in a variety of actuator applications. Their large deformation, fast response rates, optical transparency, and soft nature has made them a key area of interest in fields ranging from soft robotics to optics. PVC gels are made from PVC mixed with large quantities of plasticizer, such as dibutyl adipate (DBA). When a voltage is applied, the gel experiences an “anodophilic” deformation (in which it moves preferentially towards the anode). This unique characteristic is the result of a charge buildup near the anode surface, which creates electromechanical …

Computational Sodium Heat Pipe Simulation In Three Dimensions For Transient Nuclear Reactor Analysis With Variable Surface Heat Flux, Valerie Jean Lawdensky

UNLV Theses, Dissertations, Professional Papers, and Capstones

Heat pipes are used to transfer heat through phase change in a liquid/vapor contained in a metal tube. They are passive devices that require no pumps to circulate the fluid and can transfer heat far more efficiently than a solid copper rod of the same diameter. They are commonly used in laptop computers where copper heat pipes filled with water take heat away from the CPU and transfer the heat to air through a heat exchanger. Heat pipes were also used in the Kilopower nuclear reactor where higher temperatures required sodium as the working fluid with stainless steel tubes. Computer …

Global 3d Radiation Hydrodynamic Simulations Of Proto-Jupiter’S Convective Envelope, Zhaohuan Zhu, Yan-Fei Jiang, Hans Baehr, Andrew N. Youdin, Philip J. Armitage, Rebecca G. Martin

Physics & Astronomy Faculty Research

The core accretion model of giant planet formation has been challenged by the discovery of recycling flows between the planetary envelope and the disc that can slow or stall envelope accretion. We carry out 3D radiation hydrodynamic simulations with an updated opacity compilation to model the proto-Jupiter’s envelope. To isolate the 3D effects of convection and recycling, we simulate both isolated spherical envelopes and envelopes embedded in discs. The envelopes are heated at given rates to achieve steady states, enabling comparisons with 1D models. We vary envelope properties to obtain both radiative and convective solutions. Using a passive scalar, we …

Use Of Pressure-Measuring Insoles To Characterize Gait Parameters In Simulated Reduced-Gravity Conditions, Christian Ison, Connor Neilsen, Jessica Deberardinis, Mohamed B. Trabia, Janet S. Dufek

Mechanical Engineering Faculty Research

Prior researchers have observed the effect of simulated reduced-gravity exercise. However, the extent to which lower-body positive-pressure treadmill (LBPPT) walking alters kinematic gait characteristics is not well understood. The purpose of the study was to investigate the effect of LBPPT walking on selected gait parameters in simulated reduced-gravity conditions. Twenty-nine college-aged volunteers participated in this cross-sectional study. Participants wore pressure-measuring insoles (Medilogic GmBH, Schönefeld, Germany) and completed three 3.5-min walking trials on the LBPPT (AlterG, Inc., Fremont, CA, USA) at 100% (normal gravity) as well as reduced-gravity conditions of 40% and 20% body weight (BW). The resulting insole data were …

Silk Fibroin Supraparticles Created By The Evaporation Of Colloidal Ouzo Droplets, Ashley Lamb, Fengjie He, Shengjie Zhai, Hui Zhao

Mechanical Engineering Faculty Research

Due to its high biocompatibility and biodegradability, supraparticles made from silk fibroin—produced from Bombyx mori (B. mori) cocoons—can find various applications in biomedical fields. The evaporation of Ouzo droplets by not requiring energy nor a surfactant is an environmentally friendly, easy, and cost-effective strategy to fabricate three-dimensional supraparticles, tackling the so-called “coffee ring effect” associated with droplet evaporation. Silk fibroins are dissolved into quaternary droplets, comprised of ultrapure water, ethanol, trans-anethole oil, and formic acid. The Ouzo droplet is able to form an oil ring that facilitates the droplet contraction to create a three-dimensional supraparticle. Using the Ouzo effect to …

Healthy Aging In Place: An Integrated Smart Home Using Alexa-Compatible Technology, Tyler Kryst

UNLV Theses, Dissertations, Professional Papers, and Capstones

The purpose of this research was to address current healthcare concerns among the aging population. Around the globe, the average life expectancy is projected to continue increasing resulting in a higher prevalence of age-related disease. With the ever-increasing capabilities of modern technology, it is necessary to apply this technology to increase the health and safety of older adults. This work had three objectives. The first objective was the establishment of an integrated smart home aimed at creating a healthy aging-in-place environment through the use of Alexa. The second objective was the development and integration of a completely custom health device …

Plasma Aerodynamics: Experimental Quantification Of The Lift Force Generated On An Airfoil Using Plasma Actuation To Estimate Power Requirements In Small Uav Applications, Getachew Ashenafi

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research addressed the amount of electric power required to induce specific changes in lift force using a NACA 2127 airfoil with a chord length of ~28 mm, connected to a micro load cell, in a wind tunnel of 103 square centimeter cross-section. A DBD plasma actuator supplied by a ZVS driven high voltage pulsed DC circuit, operating at a frequency of 17.4 kHz, was utilized for voltages of up to 5000 V. Two configurations of electrode gapping were compared to determine the efficient use of power. The configuration with a gap of ~1 mm between the upstream and downstream …

Patient-Specific Finite Element Analysis For Mandibular Fracture Fixation, Ethan Snyder

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis proposes an approach for Finite Element Analysis (FEA) of mandibular fracture fixation. Using a Computerized Tomography (CT) scan of mandible obtained from a specific person, the material characteristics, density and modulus of elasticity, were determined from a set of discrete points within the mandible that are 1mm spaced based on the Hounsfield Units of these points. The mandible geometry was sectioned to simulate a fracture. Muscle and mastication forces were added to replicate post-surgery loading. Using a standard linear miniplate, this material model was compared with two commonly used mandibular cortical shell bone models: isotropic and orthotropic. A …

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …